Index (ErgoTech VIB/TransSECS Scripting API)

A B C D E F G H I J L M N O P Q R S T U V W X Y Z _

A

ABS - Class in com.ergotech.secs: Any Binary String.
ABS(byte[]) - Constructor for class com.ergotech.secs.ABS: Create a new message from an array of bytes.
ABS(SecsFormat) - Constructor for class com.ergotech.secs.ABS: Create a new message from a SecsFormat data type.
Abs - Class in com.ergotech.vib.manipulators: Returns the absolute value of the input.
Abs() - Constructor for class com.ergotech.vib.manipulators.Abs: Generic Constructor.
ack() - Method in class com.ergotech.secs.S1F14: Returns whether the COMMACK contained a zero (valid ack) or a non-zero value (error report).
ACK - Static variable in class com.ergotech.secs.SecsIConnectionManager
ACK - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: ACK - 0x06
ACK - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: ACK - 0x06
ACKA - Class in com.ergotech.secs: Indicates success of a request.
ACKA(boolean) - Constructor for class com.ergotech.secs.ACKA: Create a new message with Boolean (SecsFormat11) data.
ACKA(SecsFormat) - Constructor for class com.ergotech.secs.ACKA: Create the object from a SecsFormat data type.
ACKC1 - Class in com.ergotech.secs: Acknowledge for tag write data.
ACKC1(byte) - Constructor for class com.ergotech.secs.ACKC1: Create a new message from a byte data type.
ACKC1(SecsFormat) - Constructor for class com.ergotech.secs.ACKC1
ACKC10 - Class in com.ergotech.secs: Acknowledge code.
ACKC10(byte) - Constructor for class com.ergotech.secs.ACKC10: Create a new message from a byte data type.
ACKC10(SecsFormat) - Constructor for class com.ergotech.secs.ACKC10
ACKC5 - Class in com.ergotech.secs: Acknowledge code.
ACKC5(byte) - Constructor for class com.ergotech.secs.ACKC5: Create a new message from a byte data type.
ACKC5(SecsFormat) - Constructor for class com.ergotech.secs.ACKC5
ACKC6 - Class in com.ergotech.secs: Acknowledge code.
ACKC6(byte) - Constructor for class com.ergotech.secs.ACKC6: Create a new message from a byte data type.
ACKC6(SecsFormat) - Constructor for class com.ergotech.secs.ACKC6
ACKC7 - Class in com.ergotech.secs: Acknowledge code.
ACKC7(byte) - Constructor for class com.ergotech.secs.ACKC7: Create a new message from a byte data type.
ACKC7(SecsFormat) - Constructor for class com.ergotech.secs.ACKC7
acquireLatestPropertiesFrom(ValueObjectInterface, ValueObjectInterface, ValueObjectInterface) - Static method in class com.ergotech.vib.valueobjects.ValueObject: This method will do an "acquirePropertiesFrom" on both the incoming values.
acquirePropertiesFrom(ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ValueObject: Copies many of the attributes from this object to the target object.
acquirePropertiesFrom(ValueObjectInterface) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will use all the settings (other than the value and type) in sourceValueObject to "fill" these corresponding attributes of this ValueObject.
activate() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Initialize the spooler variable and send the activated event report.
ACTIVE_PORT - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The host port.
activeConnectionRetryIntervalValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Sets all device ids to be valid or not.
activeDefaultMessageHandler - Static variable in class com.ergotech.transsecs.secs.TransSecsVoyeur: The default message handler to use to the equipment.
activeT1ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the active T1 value.
activeT2ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT2 value.
activeT3ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT3 value.
activeT4ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT4 value.
activeT5ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT5 value.
activeT6ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT6 value.
activeT7ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT7 value.
activeT8ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the activeT8 value.
Add - Class in com.ergotech.vib.manipulators: Calculates the sum of two numbers.
Add() - Constructor for class com.ergotech.vib.manipulators.Add: Constructor.
add(PLCServer, boolean) - Method in class com.ergotech.vib.servers.ab.ControlLogixAddressBlock: Add the address.
add(PLCServer, boolean) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Add the address.
add(ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
add(int, ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
addAlarm(String, long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Add an alarm variable.
addALID(long, String, String, int, long, long, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for ALIDs.
addALID(long, String, String, int, long, long, Object, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for ALIDs.
addALID(int, String, String, int, int, int, Object, String, String, String, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for ALIDs.
addALID(int, String, String, int, int, int, Object, String, String, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for ALIDs.
addALIDsFromCSV(File) - Method in class com.ergotech.transsecs.secs.TransSecsController: Parse a csv file of ALIDs.
addAll(Collection<? extends ValueObjectInterface>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
addAll(int, Collection<? extends ValueObjectInterface>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
addBinaryValue(byte) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addBinaryValues(byte[]) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addBoolValue(boolean) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addByteValue(byte) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addCeid(String, long, List<Long>, boolean) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Add a ceid.
addCEID(long, String, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for CEIDs.
addCEID(long, String, Object, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for CEIDs.
addCEID(int, String, Object, String, String, String, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for CEIDs.
addCEID(int, String, Object, String, String, List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for CEIDs.
addCEIDsFromCSV(File) - Method in class com.ergotech.transsecs.secs.TransSecsController: Parse a csv file of CEIDs.
addConnectionToDataSource(DataSource.Writable, String, String, String) - Method in class com.ergotech.transsecs.secs.PublishBean: Adds the connection from this server to the device and server.
addConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemDevicesSVID: Adds the connection from this server to the device and server.
addConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemECID: Adds the connection from this server to the device and server.
addConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemID: Adds the connection from this server to the device and server.
addConnectionToDevice(DataSource.Writable, String, String, String) - Method in class com.ergotech.transsecs.secs.PublishBean: Adds the connection from this server to the device and server.
addConnector(Connector) - Method in class com.ergotech.vib.manipulators.Constant: Adds an input Connector to this component from the primary outport of a data source.
addConnector(Connector) - Method in class com.ergotech.vib.servers.DataSource: Adds the given connector to this data source.
addConnector(Connector, boolean) - Method in class com.ergotech.vib.servers.DataSource: Adds the given connector to this data source.
addConnector(Connector) - Method in class com.ergotech.vib.servers.SimpleDataSource: Adds an input Connector to this component from the primary outport of a data source.
addConnector(String, Connector) - Method in class com.ergotech.vib.servers.SimpleDataSource: Adds an input Connector to this component from a specified outport of a data source.
addDataSource(DataSource) - Method in class com.ergotech.vib.servers.SimpleDataSource: Sets the data source with the given Name.
addDelegate(Delegate) - Method in class TransSECS.MessageReceiveNotifier: Add a raw delegate.
addDependentEInterface(LifeCycle) - Method in class com.ergotech.transsecs.secs.TransSecsController: Add a dependent interface that will be lifecycled as part of this controller.
addDeviceId(int, Object) - Method in class com.ergotech.secs.PortManager: Add a message handler for a specified session id.
addDigitalIn(DigitalIn) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
addDigitalOut(DigitalOut) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
addDoubleValue(double) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addDVNAME(long, String, String, double, double, String, int, double, long, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for DVNAMEs.
addDVNAME(int, String, String, double, double, String, int, double, int, Object, String, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for DVNAMEs.
addDVNAME(int, String, String, double, double, String, int, double, int, Object, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for DVNAMEs.
addECID(long, String, String, double, double, String, int, double, long, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for ECIDs.
addECID(int, String, String, double, double, String, int, double, int, Object, String, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for ECIDs.
addECID(int, String, String, double, double, String, int, double, int, Object, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for ECIDs.
addElement(SecsFormat) - Method in class com.ergotech.secs.SecsFormat00: Provides backwards compatibility.
addElement(ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Adds a value to the array.
addEscapes(String) - Static method in class com.ergotech.vib.manipulators.string.RegularExpression: Add escape characters from the string.
addFloatValue(float) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addInputRegister(InputRegister) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
addIntValue(int) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addListener(SecsEventListener) - Method in class com.ergotech.secs.SecsEventHandler: This will register the listener for ALL events.
addListenerForId(SecsEventListener, int) - Method in class com.ergotech.secs.SecsEventHandler: This will register a SecsEventListeners to receive a specific event by id.
addLogger(LoggerInterface) - Method in class com.ergotech.transsecs.secs.MultiLogger: Adds a logger.
addLongValue(long) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addMessageDelegate(MessageDelegate) - Method in class TransSECS.MessageReceiveNotifier: Add a message delegate
addMessageHandler(Object) - Method in class com.ergotech.secs.gem.GemEquipment: Add an additional message hanlder.
addMessageHandler(Object) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Add a message handler to the interface.
addMessageHandler(Object) - Method in class com.ergotech.secs.gem.GemHandler
addMessageHandler(Serializable) - Method in class com.ergotech.secs.HSMSActiveWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.HSMSActiveWrapper: Add a message handler object.
addMessageHandler(Serializable) - Method in class com.ergotech.secs.HSMSPassiveWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.HSMSPassiveWrapper: Add a message handler object.
addMessageHandler(int, Object) - Method in class com.ergotech.secs.HSMSSocketListener: Add a message handler for this connection.
addMessageHandler(Serializable) - Method in class com.ergotech.secs.HSMSWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.HSMSWrapper: Add a message handler object.
addMessageHandler(Serializable) - Method in class com.ergotech.secs.SecsIWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.SecsIWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.SessionManager: Adds a new message handle object.
addMessageHandler(Serializable) - Method in class com.ergotech.secs.TerminalServerWrapper: Add a message handler object.
addMessageHandler(Object) - Method in class com.ergotech.secs.TerminalServerWrapper: Add a message handler object.
addMessageHandler(Serializable) - Method in interface com.ergotech.secs.WrapperInterface: Add a message handler object.
addMessageHandler(Object) - Method in interface com.ergotech.secs.WrapperInterface: Add a message handler object.
addObjectAsDelegate(Object) - Method in class TransSECS.MessageReceiveNotifier: Add a raw delegate.
addObjectToNotifier(GemIDConnection, String, Object) - Static method in class TransSECS.MessageReceiveNotifier: Return a MessageReceiveNotifier for the particular message on a given connection after adding the delegate.
addPortManager(PortManager) - Static method in class com.ergotech.secs.PortManager: Adds a new port manager.
addPropertyChangeListener(PropertyChangeListener) - Method in class com.ergotech.vib.servers.SimpleDataSource: The specified PropertyChangeListeners vetoableChange method will be called each time the value of any constrained property is changed.
addRegister(Register) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
addReport(String, long, List<Long>, boolean) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Add a report.
addResponseHandler(MessageResponseInterface) - Method in class com.ergotech.secs.SecsMsg: Adds a response listener for this message.
ADDRESS_OFFSET - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: The offset of the address in the message - always 1
ADDRESS_REGEX - Static variable in class com.ergotech.vib.servers.melsec.MelsecServer
addressLocation(int, int) - Method in class com.ergotech.vib.servers.ab.ControlLogixAddressBlock: Returns "WITHIN".
addressLocation(int, int) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Ask if the address could be added to this address block.
addRow(Vector<ValueObjectInterface>) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will add a new row.
addServer(S) - Method in class com.ergotech.vib.servers.plc.DirtyVector: This calls the superclass's method after setting the dirty flag.
addServer(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Find, or create a block to which to add the PLC server.
addServer(PLCServer) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
addServer(PLCServer) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
addSessionManager(SessionManager) - Method in class com.ergotech.secs.ConnectionManager: Add a session manager.
addSessionManager(SessionManager, int) - Method in class com.ergotech.secs.ConnectionManager: Add a session manager.
addSessionManager(SessionManager) - Method in interface com.ergotech.secs.ConnectionManagerInterface
addSessionManager(SessionManager) - Method in class com.ergotech.secs.HSMSConnectionManager: Add a session manager.
addShortValue(short) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addStateChangeNotifier(StateChangeNotification) - Method in class com.ergotech.secs.gem.CommunicationsHandler: Object added will recieve notification of state changes.
addStateChangeNotifier(StateChangeNotification) - Method in class com.ergotech.secs.gem.OnlineHandler: Object added will recieve notification of state changes.
addStringValue(String) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addSVID(long, String, String, double, double, String, int, double, long, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for SVIDs.
addSVID(int, String, String, double, double, String, int, double, int, Object, String, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for SVIDs.
addSVID(int, String, String, double, double, String, int, double, int, Object, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for SVIDs.
addToConnection(ConnectionManager) - Method in class com.ergotech.secs.SessionManager: Add the session from the provided connection.
addToNotifier(GemIDConnection, String, Delegate) - Static method in class TransSECS.MessageReceiveNotifier: Return a MessageReceiveNotifier for the particular message on a given connection after adding the delegate.
addUByteValue(short) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addUIntValue(long) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addULongValue(long) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addUShortValue(int) - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
addValueChangedListener(Object) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Creates a connector from the default outport of this server to the method called "valueInput" of the provided object.
addValueChangedListener(Object) - Method in class com.ergotech.vib.servers.SimpleDataSource: Creates a connector from the default outport of this server to the method called "valueInput" of the provided object.
addVetoableChangeListener(VetoableChangeListener) - Method in class com.ergotech.vib.servers.SimpleDataSource: The specified VetoableChangeListeners vetoableChange method will be called each time the value of any constrained property is changed.
addVIBEventListener(VIBEventListener) - Method in class com.ergotech.vib.servers.DataSource: Add a vib event listener.
addVID(String, long, int, int) - Method in class com.ergotech.secs.gem.GemHostModel: Add a variable.
addVID(long, int, String, String, double, double, String, int, double, long, Object) - Method in class com.ergotech.transsecs.secs.TransSecsController: The register method for VIDs.
addVID(int, int, String, String, double, double, String, int, double, int, Object, String, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: The register method for VIDs.
addVID(int, int, String, String, double, double, String, int, double, int, Object, String, String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: The register method for VIDs.
addVIDsFromCSV(File) - Method in class com.ergotech.transsecs.secs.TransSecsController: Parse a csv file of VIDs.
ADJUSTED_TIME_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when the adjusted time, that is, the date offset is changed as a result of an S2F31 message.
ADMINISTRATOR - Static variable in class com.ergotech.vib.manipulators.LocalSecurityManager: The constant for "administrator"
AGENT - Class in com.ergotech.secs: AGENT.
AGENT(String) - Constructor for class com.ergotech.secs.AGENT: Create a new message with ASCII (format 20) data.
AGENT(SecsFormat) - Constructor for class com.ergotech.secs.AGENT: Create a new message with the data contained in a SecsFormat object.
aggregateBlocks(String) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Looks and see if any of the blocks are touching.
ALARM_CLEARED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an alarm is cleared.
ALARM_DISABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an alarm is disabled.
ALARM_ENABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an alarm is enabled.
ALARM_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an alarm is registered (after it's configured) The source will be the GemALID object.
ALARM_SET - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an alarm is set.
alarmToJSON(AlarmValues, String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Encode an alarm report as a JSON message.
AlarmWriter - Interface in com.ergotech.secs.gem: This is the interface for something that will know how to generate an alarm.
ALCD - Class in com.ergotech.secs: Alarm Code Byte - Used in S5F1,F6 This is a one byte binary (Format 10) data structure that has the following values:
ALCD(byte) - Constructor for class com.ergotech.secs.ALCD: Create a new message from a byte data type.
ALCD(SecsFormat) - Constructor for class com.ergotech.secs.ALCD
ALCD_PORT_NAME - Static variable in class com.ergotech.secs.gem.GemALID: This is the name that we publish use to publish the trigger.
ALED - Class in com.ergotech.secs: Alarm enable/disable Code, 1 Byte - Used in S5F3 This is a one byte binary (Format 10) data structure that has the following values:
ALED(byte) - Constructor for class com.ergotech.secs.ALED: Create a new message from a byte data type.
ALED(SecsFormat) - Constructor for class com.ergotech.secs.ALED
ALID - Class in com.ergotech.secs: Alarm Identification, Used in S5F1,F3,F5,F6.
ALID(long) - Constructor for class com.ergotech.secs.ALID: Create a new message with an 8-Byte integer (SecsFormat30).
ALID(byte) - Constructor for class com.ergotech.secs.ALID: Create a new message with an 1-Byte integer (SecsFormat31).
ALID(short) - Constructor for class com.ergotech.secs.ALID: Create a new message with an 2-Byte integer (SecsFormat32).
ALID(int) - Constructor for class com.ergotech.secs.ALID: Create a new message with an 4-Byte integer (SecsFormat34).
ALID(SecsFormat) - Constructor for class com.ergotech.secs.ALID: Create a new message with the data contained in a SecsFormat object.
ALID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a ALID.
ALID - Static variable in class TransSECS.GemIDConnection: Used to identify a ALID.
ALID_STR - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: The string used to describe all the ALIDs.
ALID_STR - Static variable in class TransSECS.GemIDConnection: The string used to describe all the ALIDs.
alids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of Alarm Servers.
alidSecsFormat - Variable in class com.ergotech.secs.gem.GemHostModel: The format and so the byte-length of the integer ALID.
ALL_ALARMS_DISABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the alarms are disabled.
ALL_ALARMS_ENABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the alarms are enabled.
ALL_EVENTS - Static variable in class com.ergotech.secs.SecsEvent: This is the minimum value for user defined or other events.
ALL_EVENTS_DISABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the events are disabled.
ALL_EVENTS_ENABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the events are disabled.
ALL_LIMITS_UNREGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all limits are unregistered.
ALL_REPORTS_UNLINKED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an report is linked.
ALL_REPORTS_UNREGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the report are unregistered.
allDeviceIdsValidValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Sets all device ids to be valid or not.
allHandlers - Static variable in class com.ergotech.secs.ERVoyeurHandler
allIDsValid - Static variable in class com.ergotech.secs.PortManager: Whether to allow all device ids.
allowBrokenMessages - Static variable in class com.ergotech.secs.SecsMsg: If set to true this will allow messages that are short, that is the number of byte do not match the required length to be interpreted as far as possible.
allowDuplicateSECSIMessagesValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Sending a value of "true" to this method allows SECSI message to be received and processed even though they have the same system bytes as the previous message.
allowGenericSecsMessage - Static variable in class com.ergotech.secs.SecsMsg: This variable determines the disposition of messages that are not represented by a subclass of SecsMsg.
allowUnsafeAndPossiblyDangerousViolationsOfTheGEMControlStateModel(boolean) - Method in class com.ergotech.secs.gem.OnlineHandler: Enable unsafe and possibily dangerous violations of the GEM control state model.
ALTX - Class in com.ergotech.secs: Alarm text limited to 40 characters , Used in S5F1,F6.
ALTX(String) - Constructor for class com.ergotech.secs.ALTX: Create a new message with ASCII (format 20) data.
ALTX(SecsFormat) - Constructor for class com.ergotech.secs.ALTX: Create a new message with data contained in a SecsFormat object.
ALWAYS - Static variable in class com.ergotech.secs.SecsMsg: Always send multiblock messages.
ALWAYS_244BLOCK - Static variable in class com.ergotech.secs.SecsMsg: Send multiblock messages when the message data is larger than 244 regardless of the protocol.
ALWAYS_SECS1 - Static variable in class com.ergotech.secs.SecsMsg: Send multiblock messages when the connection is SECSI regardless of the message size.
And - Class in com.ergotech.vib.manipulators: Calculates the boolean AND of two inputs.
And() - Constructor for class com.ergotech.vib.manipulators.And: Generic Constructor.
ANY_CHANGE - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: Send the message on the whenever the value changes outside of the deadband.
ANYTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used by the beans to say that can handle any type of class.
appendString(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.CombineStrings: This method will be called to set the appended string.
AREYOUTHERE - Class in com.ergotech.secs: AREYOUTHERE.
AREYOUTHERE(byte) - Constructor for class com.ergotech.secs.AREYOUTHERE: Create a new message with an 1-Byte integer (SecsFormat51).
AREYOUTHERE(SecsFormat) - Constructor for class com.ergotech.secs.AREYOUTHERE: Create a new message with the data contained in a SecsFormat object.
ArrayBuilder - Class in com.ergotech.vib.manipulators.array: This will take 16 inputs and construct a arrayvalueobject for the output.
ArrayBuilder() - Constructor for class com.ergotech.vib.manipulators.array.ArrayBuilder: Generic Constructor.
ArrayDataSource - Class in com.ergotech.vib.servers: This generates ArrayValueObjects for testing VIB components.
ArrayDataSource() - Constructor for class com.ergotech.vib.servers.ArrayDataSource: Constructor
ArrayElementFilter - Class in com.ergotech.vib.manipulators.array: This takes an ArrayValueObject (AVO) and outputs the value (as a ValueObject) of the nth element.
ArrayElementFilter() - Constructor for class com.ergotech.vib.manipulators.array.ArrayElementFilter: Create and initialize the manipulator.
arrayInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Publish a incoming value object.
ArraySplitter - Class in com.ergotech.vib.manipulators.array: An array set takes an ArrayValueObject and sets values to a set of servers based on the values received.
ArraySplitter() - Constructor for class com.ergotech.vib.manipulators.array.ArraySplitter: Create and initialize the manipulator.
ArraySplitter.SplitterDataSource - Class in com.ergotech.vib.manipulators.array: This data source allows for an initialization of the value object interface and so provides the ability for a subclass (eg PopupInitializer) to implement different behavior whent he value is first set vs.
ArrayToString - Class in com.ergotech.vib.manipulators.array: Takes all the elements of an array and creates a single String delimited by the designated delimiter String.
ArrayToString() - Constructor for class com.ergotech.vib.manipulators.array.ArrayToString: Create and initialize the manipulator.
ARRAYTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
ArrayValueObject - Class in com.ergotech.vib.valueobjects: This will store an array of objects.
ArrayValueObject() - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject
ArrayValueObject(int) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject: Create an object with a given size in the default locale.
ArrayValueObject(int, Locale) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject: Create an object with a given size and in a particular locale.
ArrayValueObject(Vector<ValueObjectInterface>) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject
ArrayValueObject(Vector<ValueObjectInterface>, Locale) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject: Create an object from a vector in a given locale.
ArrayValueObject(Object[]) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject: Create a new object from a vector.
ArrayValueObject(Object[], Locale) - Constructor for class com.ergotech.vib.valueobjects.ArrayValueObject: Create a new object from a vector.
associatedIDs - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable: The list of VIDs that are in some way associated with this ID.
asyncValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the trigger routine.
ATTEMPT_ONLINE - Static variable in class com.ergotech.secs.gem.OnlineHandler: ATTEMPT_ONLINE value is 2 matching E5 definition.
attemptOnlineAndWait() - Method in class com.ergotech.secs.gem.OnlineHandler: This will return true if we are online...
ATTRDATA - Class in com.ergotech.secs: Contains a specific attribute value for a specific object.
ATTRDATA(String) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with ASCII (format 20) data.
ATTRDATA(float) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 4-Byte floating point number (SecsFormat44).
ATTRDATA(double) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 8-Byte floating point number (SecsFormat40).
ATTRDATA(long) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 8-Byte integer (SecsFormat30).
ATTRDATA(byte) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 1-Byte integer (SecsFormat31).
ATTRDATA(short) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 2-Byte integer (SecsFormat32).
ATTRDATA(int) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with an 4-Byte integer (SecsFormat34).
ATTRDATA(SecsFormat) - Constructor for class com.ergotech.secs.ATTRDATA: Create a new message with the data contained in a SecsFormat object.
attributeNames() - Method in class com.ergotech.vib.valueobjects.ValueObject: This will return an enumeration of all the current keys.
attributeNames() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the enumeration of attributes.
ATTRID - Class in com.ergotech.secs
ATTRID(String) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with ASCII (format 20) data.
ATTRID(long) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with an 8-Byte integer (SecsFormat50).
ATTRID(byte) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with an 1-Byte integer (SecsFormat51).
ATTRID(short) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with an 2-Byte integer (SecsFormat52).
ATTRID(int) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with an 4-Byte integer (SecsFormat54).
ATTRID(SecsFormat) - Constructor for class com.ergotech.secs.ATTRID: Create a new message with the data contained in a SecsFormat object.
authenticatedClientRequest(String, int, ValueObjectInterface) - Method in class com.ergotech.vib.servers.SimpleDataSource: This method is called by a client, potentially over the net, to perform some operation.
autoMode - Variable in class com.ergotech.vib.manipulators.spc.PidControl
autoSuspend - Variable in class com.ergotech.vib.servers.DataSource: this value indicates when the server will autoSuspend.
AUTOSUSPEND_DEFAULT - Static variable in class com.ergotech.vib.servers.DataSource: Return to default autosuspend status
AUTOSUSPEND_NEVER - Static variable in class com.ergotech.vib.servers.DataSource: Never auto suspend
AUTOSUSPEND_NO_LISTENERS - Static variable in class com.ergotech.vib.servers.DataSource: Auto suspend when there are no connectors (or they are all suspended).
AUTOSUSPEND_NO_LISTENERS_AND_NO_SOURCES - Static variable in class com.ergotech.vib.servers.DataSource: autosuspend when there are no connectors (or they are all suspended) and also no one registered to send values.
available() - Method in class com.ergotech.secs.HSMSSocketManager: Returns the number of bytes available.
available() - Method in class com.ergotech.secs.PortManager: Returns the number of bytes available.
available() - Method in class com.ergotech.secs.SecsISocketManager: Returns the number of bytes available.
available() - Method in class com.ergotech.secs.SerialPortManager: Returns the number of bytes available.
available() - Method in class com.ergotech.secs.TerminalServerPortManager: Returns the number of bytes available.
available() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will return the number of bytes available.
available() - Method in class com.ergotech.vib.ports.Port: This will return the number of bytes available.
available() - Method in class com.ergotech.vib.ports.PortInputStream: Returns the number of bytes available at the port.
available() - Method in interface com.ergotech.vib.ports.PortInterface: This will return the number of bytes available.
available() - Method in class com.ergotech.vib.ports.UDPSocket: If no bytes are available from the existing input stream, then this method will read a complete new packet.
availableServers() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: No servers are available currently.
availableServers() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.ServersDeviceManager: The list of possible sub-servers of this device.
availableServers() - Method in class com.ergotech.vib.servers.ValueHolderDeviceManager: The list of possible sub-servers of this device.

B

BadParameterException - Exception in com.ergotech.vib.exceptions: This is the exception handler for a bad server parameter
BadParameterException() - Constructor for exception com.ergotech.vib.exceptions.BadParameterException: zero argument constructor
BadParameterException(String) - Constructor for exception com.ergotech.vib.exceptions.BadParameterException: constructor
Base64 - Class in com.ergotech.transsecs.secs: Encodes and decodes to and from Base64 notation.
Base64.InputStream - Class in com.ergotech.transsecs.secs: A Base64#InputStream will read data from another InputStream, given in the constructor, and encode/decode to/from Base64 notation on the fly.
Base64.OutputStream - Class in com.ergotech.transsecs.secs: A Base64#OutputStream will write data to another OutputStream, given in the constructor, and encode/decode to/from Base64 notation on the fly.
baudRateValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the baud value.
beanDebugLevel - Variable in class com.ergotech.transsecs.secs.TransSecsVoyeur: this bean's debug level (an expert property)
BINARYTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
BinaryValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
BinaryValueObject() - Constructor for class com.ergotech.vib.valueobjects.BinaryValueObject: The default constructor.
BinaryValueObject(int) - Constructor for class com.ergotech.vib.valueobjects.BinaryValueObject: Creates a value object with a specific size.
BinaryValueObject(int, Color) - Constructor for class com.ergotech.vib.valueobjects.BinaryValueObject: Creates a value object with the current size.
BinaryValueObject(byte[], Color) - Constructor for class com.ergotech.vib.valueobjects.BinaryValueObject: Creates a value object with the current integer value.
BinaryValueObject(byte[]) - Constructor for class com.ergotech.vib.valueobjects.BinaryValueObject: Creates a value object with the current integer value.
BIT_ARRAY - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
BIT_ARRAY - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
BitSelector - Class in com.ergotech.vib.manipulators: This manipulator returns a single bit from the input long value.
BitSelector() - Constructor for class com.ergotech.vib.manipulators.BitSelector: Constructor.
BitwiseAnd - Class in com.ergotech.vib.manipulators: Calculates the bitwise AND of two inputs.
BitwiseAnd() - Constructor for class com.ergotech.vib.manipulators.BitwiseAnd: Generic Constructor.
BitwiseOr - Class in com.ergotech.vib.manipulators: Calculates the bitwise OR of two inputs.
BitwiseOr() - Constructor for class com.ergotech.vib.manipulators.BitwiseOr: Generic Constructor.
BitwiseXor - Class in com.ergotech.vib.manipulators: Calculates the bitwise XOR of two inputs.
BitwiseXor() - Constructor for class com.ergotech.vib.manipulators.BitwiseXor: Generic Constructor.
Blinker - Class in com.ergotech.vib.manipulators: This will take one value...
Blinker() - Constructor for class com.ergotech.vib.manipulators.Blinker
BLOCK_RECEIVE_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when blocks cannot be received.
BLOCK_SEND_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when blocks cannot be sent.
BLOCK_WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when blocks are received in the wrong order (SECSI only).
blockOnVerify(SecsMsg, int) - Method in class com.ergotech.secs.gem.OnlineHandler: Returns false if the message verifiers exist and the message is acceptable to the verifiers.
BlockProcessImage - Class in com.ergotech.vib.servers.modbus.slave: This process image is designed to allow a system to simulate the memory address space of a PLC.
BlockProcessImage(int, int, int, int, int, int, int, ModbusSlaveBase) - Constructor for class com.ergotech.vib.servers.modbus.slave.BlockProcessImage: Constructs a new LazyProcessImage instance.
BlueToothRFCommFactory - Class in com.ergotech.vib.ports: This factory will provide a serial port that matches the parameters provided.
BlueToothRFCommFactory(String) - Constructor for class com.ergotech.vib.ports.BlueToothRFCommFactory: Create the port factory with a specific name.
BOOL - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
BOOL - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
BOOLEAN_VALUE - Static variable in class com.ergotech.vib.servers.plc.PLCServer: The value type BOOLEAN
BooleanObjectValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created from a java.lang.Boolean subclass.
BooleanObjectValueObject() - Constructor for class com.ergotech.vib.valueobjects.BooleanObjectValueObject: The default constructor.
BooleanObjectValueObject(Boolean, int, Date, Color) - Constructor for class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Creates a value object with the current Boolean value, the color associated with that value (newColor) and the quality.
BooleanObjectValueObject(Boolean, int, Date) - Constructor for class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Creates a value object with the current Boolean value, the color associated with that value (newColor) and QUALITY_GOOD.
BooleanObjectValueObject(Boolean, int) - Constructor for class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Creates a value object with the current Boolean value, the color associated with that value (newColor) and QUALITY_GOOD.
BooleanObjectValueObject(Boolean) - Constructor for class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Creates a value object with the current value, a null color and QUALITY_GOOD.
BOOLEANTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
booleanValue() - Method in class com.ergotech.secs.ACKC1
booleanValue() - Method in class com.ergotech.secs.ACKC10
booleanValue() - Method in class com.ergotech.secs.ACKC5
booleanValue() - Method in class com.ergotech.secs.ACKC6
booleanValue() - Method in class com.ergotech.secs.ACKC7
booleanValue() - Method in class com.ergotech.secs.CEPACK
booleanValue() - Method in class com.ergotech.secs.COMMACK: Returns the value of this object as a boolean.
booleanValue() - Method in class com.ergotech.secs.CPACK
booleanValue() - Method in class com.ergotech.secs.DRACK: Returns the value of this object as a boolean.
booleanValue() - Method in class com.ergotech.secs.EAC
booleanValue() - Method in class com.ergotech.secs.ERACK: Returns the value of this object as a boolean.
booleanValue() - Method in class com.ergotech.secs.ERRCODE
booleanValue() - Method in class com.ergotech.secs.HCACK
booleanValue() - Method in class com.ergotech.secs.LIMITACK
booleanValue() - Method in class com.ergotech.secs.LRACK
booleanValue() - Method in class com.ergotech.secs.LVACK
booleanValue() - Method in class com.ergotech.secs.MF
booleanValue() - Method in class com.ergotech.secs.MMODE
booleanValue() - Method in class com.ergotech.secs.PREVENTID
booleanValue() - Method in class com.ergotech.secs.PRJOBMILESTONE
booleanValue() - Method in class com.ergotech.secs.RCPCMD
booleanValue() - Method in class com.ergotech.secs.RCPDEL
booleanValue() - Method in class com.ergotech.secs.RCPSECCODE
booleanValue() - Method in class com.ergotech.secs.RCPSTAT
booleanValue() - Method in class com.ergotech.secs.RMACK
booleanValue() - Method in class com.ergotech.secs.RMCHGSTAT
booleanValue() - Method in class com.ergotech.secs.RMDATASIZE
booleanValue() - Method in class com.ergotech.secs.RSDA
booleanValue() - Method in class com.ergotech.secs.RSDC
booleanValue() - Method in class com.ergotech.secs.RSPACK
booleanValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the boolean representation of the object.
booleanValue() - Method in class com.ergotech.secs.SFCD
booleanValue() - Method in class com.ergotech.secs.STRACK
booleanValue() - Method in class com.ergotech.secs.TIACK: Returns the value of this object as a boolean.
booleanValue() - Method in class com.ergotech.secs.TID: Returns the value of this object as a boolean.
booleanValue() - Method in class com.ergotech.secs.VLAACK
booleanYColumns - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: if set to a non-zero value, this number of boolean columns will be generated.
BOTHSWAP - Static variable in class com.ergotech.vib.servers.plc.PLCServer: Definition for point swap style.
breakConnection() - Method in class com.ergotech.secs.HSMSSessionManager: This will break one hsms session, killing whos attached to it.
breakConnection() - Method in class com.ergotech.secs.SessionManager: This will close a connection.
BroadcastServer - Class in com.ergotech.vib.manipulators: This is a simple ValueObject forwarding component.
BroadcastServer() - Constructor for class com.ergotech.vib.manipulators.BroadcastServer: constructor
ByteBuilder - Class in com.ergotech.vib.manipulators: This will take eight boolean inputs (bits)and construct a byte value for the output.
ByteBuilder() - Constructor for class com.ergotech.vib.manipulators.ByteBuilder: Generic Constructor.
ByteSplitter - Class in com.ergotech.vib.manipulators: ByteSplitter takes a byte (integer < 256) and creates eight outputs of BooleanObjectValueObject types.
ByteSplitter() - Constructor for class com.ergotech.vib.manipulators.ByteSplitter: Create and initialize the manipulator.
BYTESWAP - Static variable in class com.ergotech.vib.servers.plc.PLCServer: Definition for point swap style.
BYTETYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface

C

calcChecksum(byte[], int, int) - Method in class com.ergotech.secs.SecsIConnectionManager: Calculate the checksum of length bytes from the given offset.
calculateRate() - Method in class com.ergotech.vib.manipulators.RateCalculator: This method is called when a new data point is registered.
calculateValue(double) - Method in class com.ergotech.vib.servers.SineServer: This will calculate the value for a specific time.
CallbackException - Exception in com.ergotech.secs: Subclass of SECSException used for Exx callbacks.
CallbackException() - Constructor for exception com.ergotech.secs.CallbackException
CallbackException(String) - Constructor for exception com.ergotech.secs.CallbackException
CallbackException(String, int) - Constructor for exception com.ergotech.secs.CallbackException
canBeAdded(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Ask if the address could be added to this address block.
canBeAdded(PLCServer, int) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Ask if the address could be added to this address block.
canConnect() - Method in class com.ergotech.vib.ports.PortDeviceServer: This is designed for subclasses to modify to determine if they have all the information to connect to the server.
CANNOT_CHANGE_TO_SS - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever a request to convert a session to Single Session but the session is already General Session.
CANNOT_OPEN_PORT - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Port cannot be opened.
CANNOT_SEND - Static variable in class com.ergotech.secs.SecsMsg: Indicates that the message could not be sent.
CANNOT_SEND - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: Indicates that the message could not be sent.
canReload() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: This server responds false to indicate that the OPC Server cannot be reloaded without a MIX restart.
canReload() - Method in class com.ergotech.vib.servers.rest.RestWrapper: This server responds true.
CARRIERID - Class in com.ergotech.secs: CARRIERID.
CARRIERID(String) - Constructor for class com.ergotech.secs.CARRIERID: Create a new message with a String (SecsFormat20).
CARRIERID(char[]) - Constructor for class com.ergotech.secs.CARRIERID
CARRIERID(SecsFormat20) - Constructor for class com.ergotech.secs.CARRIERID
CARRIERID(SecsFormat) - Constructor for class com.ergotech.secs.CARRIERID: Create a new message with the data contained in a SecsFormat object.
CarrierSlotData - Class in com.ergotech.secs
CarrierSlotData() - Constructor for class com.ergotech.secs.CarrierSlotData
CarrierSlotData(CARRIERID, SLOTID[]) - Constructor for class com.ergotech.secs.CarrierSlotData: Constructor.
CarrierSlotData(SecsFormat00) - Constructor for class com.ergotech.secs.CarrierSlotData
caseSensitive - Variable in class com.ergotech.vib.manipulators.TrueFalseManipulator: Whether or not the input is to be treated as case sensitive.
CEED - Class in com.ergotech.secs: Collection event or trace enable/disable Code.
CEED(boolean) - Constructor for class com.ergotech.secs.CEED: Create a new message with Boolean (SecsFormat11) data.
CEED(SecsFormat) - Constructor for class com.ergotech.secs.CEED: Create the object from a SecsFormat data type.
CEID - Class in com.ergotech.secs: Collection event ID.
CEID(String) - Constructor for class com.ergotech.secs.CEID: Create a new message with ASCII (format 20) data.
CEID(long) - Constructor for class com.ergotech.secs.CEID: Create a new message with an 8-Byte integer (SecsFormat30).
CEID(byte) - Constructor for class com.ergotech.secs.CEID: Create a new message with an 1-Byte integer (SecsFormat31).
CEID(short) - Constructor for class com.ergotech.secs.CEID: Create a new message with an 2-Byte integer (SecsFormat32).
CEID(int) - Constructor for class com.ergotech.secs.CEID: Create a new message with an 4-Byte integer (SecsFormat34).
CEID(SecsFormat) - Constructor for class com.ergotech.secs.CEID: Create a new message with the data contained in a SecsFormat object.
CEID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a CEID.
CEID - Static variable in class TransSECS.GemIDConnection: Used to identify a CEID.
CEID_STR - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: The string used to describe all the CEIDs.
CEID_STR - Static variable in class TransSECS.GemIDConnection: The string used to describe all the CEIDs.
CEIDExists(CEID) - Method in class com.ergotech.secs.Event
ceids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of CEID servers.
ceidSecsFormat - Variable in class com.ergotech.secs.gem.GemHostModel: The format and so the byte-length of the integer CEIDs.
Ceiling - Class in com.ergotech.vib.manipulators: Returns the ceiling of the input.
Ceiling() - Constructor for class com.ergotech.vib.manipulators.Ceiling: Generic Constructor.
CEPACK - Class in com.ergotech.secs: Command Enhanced Parameter Acknoowledge - Used in S2F50 If a specific value of CPNAME is defined to have a CEPVAL that is a LIST, then CEPACK shall have the same structure as the corresponding list format of CEPVAL as used in S2F63.
CEPACK(SecsFormat[]) - Constructor for class com.ergotech.secs.CEPACK: Create a new message with LIST (format 00) data.
CEPACK(int) - Constructor for class com.ergotech.secs.CEPACK: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
CEPACK(SecsFormat) - Constructor for class com.ergotech.secs.CEPACK
CEPVAL - Class in com.ergotech.secs: Command Enhanced Parameter Value.
CEPVAL(SecsFormat) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with and SecsFormat data.
CEPVAL(String) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with ASCII (format 20) data.
CEPVAL(boolean) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with Boolean (SecsFormat11) data.
CEPVAL(float) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 4-Byte floating point number (SecsFormat44).
CEPVAL(double) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 8-Byte floating point number (SecsFormat40).
CEPVAL(long) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 8-Byte integer (SecsFormat30).
CEPVAL(byte) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 1-Byte integer (SecsFormat31).
CEPVAL(short) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 2-Byte integer (SecsFormat32).
CEPVAL(int) - Constructor for class com.ergotech.secs.CEPVAL: Create a new message with an 4-Byte integer (SecsFormat34).
changeState(int) - Method in class com.ergotech.secs.gem.CommunicationsHandler: Changes the state to the specified state.
changeState(int) - Method in class com.ergotech.secs.gem.OnlineHandler: This does not check if the transition is valid, it just goes into the new state and sends an event.
changeStateProposed(int, int) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Implement the state change notification to know when to activate the spooler.
changeStateProposed(int, int) - Method in interface com.ergotech.secs.gem.StateChangeNotification: This method is called before a state change.
CHANGING_TO_SS - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS session/connection is converted to Single Session.
Characterization - Class in com.ergotech.transsecs.secs
Characterization() - Constructor for class com.ergotech.transsecs.secs.Characterization
CHARTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
checkin(PortInterface) - Method in class com.ergotech.vib.ports.PortPool: Return the port to the port pool.
checkin(PortInterface) - Method in interface com.ergotech.vib.ports.PortPoolInterface: This will check in a resource that you have checked out.
checkin(PortInterface) - Method in class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool
checkLimits(SecsFormatValueObject) - Method in class com.ergotech.secs.gem.GemVID: Used in setValueObject replaces evaluation for comparing limits.
checkout() - Method in class com.ergotech.vib.ports.PortPool: Get a port from the port pool to communicate with the PLC.
checkout() - Method in interface com.ergotech.vib.ports.PortPoolInterface: This method will return an instance of a port interface.
checkout() - Method in class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool
checkScript(String) - Method in class com.ergotech.vib.servers.DataSource: Check script for errors and popup a logger with any found.
CHECKSUM_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a message with a checksum error is received (SECSI only).
checkValidValue(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This is used to check that only boolean values may be used.
checkValidValue(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.MasterCalculator: This returns a valid LongValueObject or DoubleValueObject for the input.
checkValidValue(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.MasterMathConversions: This returns a valid LongValueObject or DoubleValueObject for the input.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F1
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F11: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F13: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F15: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F21: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F22: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F29: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F45: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S15F46: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S1F12: This allows the message to have zero length values.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S1F2
checkZeroLength(Vector) - Method in class com.ergotech.secs.S2F29
checkZeroLength(Vector) - Method in class com.ergotech.secs.S2F48: Return true.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S5F3: This allows the ALID to be zero length.
checkZeroLength(Vector) - Method in class com.ergotech.secs.S5F5: This allows the variables to be zero length.
checkZeroLength(Vector) - Method in class com.ergotech.secs.SecsMsg: Implemented by subclasses.
CIO_AREA_SIZE - Static variable in class com.ergotech.vib.servers.fins.FinsPLC: The cio area size (CJ1 controller).
clear() - Method in class com.ergotech.secs.gem.GemALID: Clears the alarm and triggers the event if enabled.
clear(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemALID: Clears the alarm and triggers the event if enabled.
clear(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder: Delete all elements currently in the array cache
clear(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Counter: The value changed method to clear the Counter (resets to minimum or maximum).
clear() - Method in class com.ergotech.vib.ports.PortPool: This method is called when the port pool is no longer in use.
clear() - Method in interface com.ergotech.vib.ports.PortPoolInterface: This inidicates that the port pool is no longer required.
clear() - Method in class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool: This closes the server socket.
clear() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This clears the Vector using removeAllElements.
clearAlarm(SecsFormat3x5x) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Clear Alarm will clear an alarm.
clearAlarm(int) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Clear Alarm will clear an alarm.
clearAlarm(int) - Method in class com.ergotech.secs.gem.GemHandler: Clear Alarm will clear an alarm.
clearAlarm(SecsFormat3x5x) - Method in class com.ergotech.secs.gem.GemHandler: Clear Alarm will clear an alarm.
clearAlarm(SecsFormat3x5x, Hashtable<SecsFormat3x5x, SecsFormat>) - Method in class com.ergotech.secs.gem.GemHandler: Clear Alarm will clear an alarm.
clearAllReports() - Method in class com.ergotech.secs.gem.GemCEID: Clears all reports associated with this CEID.
clearInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: Clear the current map of JSON values.
clearMessageLog() - Method in class com.ergotech.vib.ports.PortDeviceServer: This will send an empty string as the message string and send a value of zero (NO_ERROR) to the output.
clearMessageLog() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: This will send an empty string as the message string and send a value of zero (NO_ERROR) to the output.
clearReport(GemRPTID) - Method in class com.ergotech.secs.gem.GemCEID: Clears a particular report associated with this CEID.
clientRequest(String, String, int, ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This is an alternate mechanism for the client to contact the server.
clientRequest(String, String, int, ValueObjectInterface) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Overridden to allow for a DeviceInterface.PREPARE_SERVER and DeviceInterface.RELEASE_SERVER.
clientRequest(String, String, int, ValueObjectInterface) - Method in class com.ergotech.vib.servers.SimpleDataSource: This is an others to contact the server.
clientResponse(String, int, ValueObjectInterface) - Method in class com.ergotech.vib.servers.SimpleDataSource: The response to a client request.
clone() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Permit cloning of this instance so that we can test receiving without impacting the instance that is held by the controller.
close() - Method in class com.ergotech.secs.HSMSSocketManager: Close the socket manager.
close() - Method in class com.ergotech.secs.PortManager: Close the port.
close() - Method in class com.ergotech.secs.SecsISocketManager: Close the socket manager.
close() - Method in class com.ergotech.secs.SerialPortManager: Close the socket manager.
close() - Method in class com.ergotech.secs.TerminalServerPortManager: Close the socket manager.
close() - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Flushes and closes (I think, in the superclass) the stream.
close() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will close a port (including all streams).
close() - Method in class com.ergotech.vib.ports.PortInputStream: Close the stream and the port.
close() - Method in interface com.ergotech.vib.ports.PortInterface: This will close a port.
close() - Method in class com.ergotech.vib.ports.PortOutputStream: Close the port.
close() - Method in class com.ergotech.vib.ports.SerialWrapper: This will close a port (including all streams).
close() - Method in class com.ergotech.vib.ports.TCPActiveSocket: This will close the socket and the streams.
close() - Method in class com.ergotech.vib.ports.TCPPassiveSocket: This will close the socket and the streams.
close() - Method in class com.ergotech.vib.ports.UDPSocket: This will close the socket and the streams.
close() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer.EIPPort: Close the connection to the PLC.
closeConnection() - Method in class com.ergotech.secs.ConnectionManager: Terminate the connection.
closeConnection() - Method in class com.ergotech.secs.SecsIConnectionManager: Close the connection and stop the input thread.
closeListeningSocket() - Method in class com.ergotech.secs.HSMSSocketListener: Close the listening socket manager.
closeListeningSocket(boolean) - Method in class com.ergotech.secs.HSMSSocketListener: Close the listening socket manager.
closeListeningSocket() - Method in class com.ergotech.secs.HSMSSocketManager: This will close the socketListener if it exists.
CMDA - Class in com.ergotech.secs: Command acknowledge code.
CMDA(byte) - Constructor for class com.ergotech.secs.CMDA: Create a new message from a byte data type.
CMDA(SecsFormat) - Constructor for class com.ergotech.secs.CMDA: Create a new message from a SecsFormat data type.
CodeToString - Class in com.ergotech.vib.manipulators.string: This will take an input (String or number) and output a value.
CodeToString() - Constructor for class com.ergotech.vib.manipulators.string.CodeToString: Default constructor.
COIL - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
colorHi - Variable in class com.ergotech.vib.servers.DataSource: the Color sent for values equal to or exceeding the ValueHi, but less than ValueHiHi
colorHiHi - Variable in class com.ergotech.vib.servers.DataSource: the Color sent for values equal to or exceeding the ValueHiHi
colorLo - Variable in class com.ergotech.vib.servers.DataSource: the Color sent for values equal to or less than the ValueLo, but greater than the valueLoLo
colorLoLo - Variable in class com.ergotech.vib.servers.DataSource: the Color sent for values equal to or less than the ValueLoLo
colorNormal - Variable in class com.ergotech.vib.servers.DataSource: the Color sent for values any values that are not hi, hihi, lo, or lolo
columns - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: Number of columns.
com.ergotech.secs - package com.ergotech.secs
com.ergotech.secs.gem - package com.ergotech.secs.gem
com.ergotech.transsecs.secs - package com.ergotech.transsecs.secs
com.ergotech.vib.exceptions - package com.ergotech.vib.exceptions
com.ergotech.vib.manipulators - package com.ergotech.vib.manipulators
com.ergotech.vib.manipulators.array - package com.ergotech.vib.manipulators.array
com.ergotech.vib.manipulators.datetime - package com.ergotech.vib.manipulators.datetime
com.ergotech.vib.manipulators.spc - package com.ergotech.vib.manipulators.spc
com.ergotech.vib.manipulators.string - package com.ergotech.vib.manipulators.string
com.ergotech.vib.ports - package com.ergotech.vib.ports
com.ergotech.vib.ports.serial - package com.ergotech.vib.ports.serial
com.ergotech.vib.servers - package com.ergotech.vib.servers
com.ergotech.vib.servers.ab - package com.ergotech.vib.servers.ab
com.ergotech.vib.servers.fins - package com.ergotech.vib.servers.fins
com.ergotech.vib.servers.melsec - package com.ergotech.vib.servers.melsec
com.ergotech.vib.servers.modbus - package com.ergotech.vib.servers.modbus
com.ergotech.vib.servers.modbus.slave - package com.ergotech.vib.servers.modbus.slave
com.ergotech.vib.servers.mqttwrapper - package com.ergotech.vib.servers.mqttwrapper
com.ergotech.vib.servers.omron - package com.ergotech.vib.servers.omron
com.ergotech.vib.servers.plc - package com.ergotech.vib.servers.plc
com.ergotech.vib.servers.ppi - package com.ergotech.vib.servers.ppi
com.ergotech.vib.servers.raspi - package com.ergotech.vib.servers.raspi
com.ergotech.vib.servers.rest - package com.ergotech.vib.servers.rest
com.ergotech.vib.utils - package com.ergotech.vib.utils
com.ergotech.vib.valueobjects - package com.ergotech.vib.valueobjects
CombineStrings - Class in com.ergotech.vib.manipulators.string: There are three String inputs to this manipulator.
CombineStrings() - Constructor for class com.ergotech.vib.manipulators.string.CombineStrings
COMMACK - Class in com.ergotech.secs: Establish Communications Acknowledge Code.
COMMACK(byte) - Constructor for class com.ergotech.secs.COMMACK: Create a new message from a byte data type.
COMMACK(SecsFormat) - Constructor for class com.ergotech.secs.COMMACK: Create a new message from a SecsFormat data type.
command - Variable in class com.ergotech.vib.manipulators.CommandExecutor: The command we will execute
CommandExecutor - Class in com.ergotech.vib.manipulators
CommandExecutor() - Constructor for class com.ergotech.vib.manipulators.CommandExecutor: Constructor
commDelayTracker(ValueChangedEvent) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This method tracks changes to "EstablishCommunicationsTimeout" and will start the thread if the delay is non-zero and the thread is not already running.
commDelayTracker(int) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This method tracks changes to "EstablishCommunicationsTimeout" and will start the thread if the delay is non-zero and the thread is not already running.
COMMUNICATING - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant COMMUNICATING.
COMMUNICATION_STATE_COMMUNICATING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed to communicating.
COMMUNICATION_STATE_DISABLED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed to disabled.
COMMUNICATION_STATE_NON_COMMUNICATING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed to non-communicating.
CommunicationsHandler - Class in com.ergotech.secs.gem: This System Handler will maintain the current state of the equipment (Communicating, Not-Communicating, Disabled) This will also stop the flow of messages in both directions when the state is not communicating.
CommunicationsHandler() - Constructor for class com.ergotech.secs.gem.CommunicationsHandler: General Constructor.
CommunicationsHandler(String) - Constructor for class com.ergotech.secs.gem.CommunicationsHandler: General Constructor.
compareTo(ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is our implementation (for JDK 1.1 compatibility) of the Comparable interface of Java 2.
compareTo(ValueObjectInterface) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is our implementation (for JDK 1.1 compatibility) of the Comparable interface of Java 2.
COMPLETE - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU finished.
configPorts() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: Sets the baud rate, data bits, stop bits and parity for the port.
configPorts() - Method in class com.ergotech.vib.ports.SerialWrapper: This method will set all the current parameters (baud rate, data bits, stop bits and parity) to the port.
configure() - Method in class com.ergotech.vib.servers.plc.PLCServer: Sets the timebase of the server.
configured - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable: On the tool, configured is the same as enabled for a CEID and is ignored for a report id.
configureParameters(Object, String) - Static method in class com.ergotech.vib.utils.Utils: Please use setParameters instead
configureParameters(Object, Map<String, Object>) - Static method in class com.ergotech.vib.utils.Utils: Please use setParameters instead
configurePort() - Method in class com.ergotech.secs.SerialPortManager: Open the port and set up the object to receive events.
configurePort() - Method in class com.ergotech.vib.ports.PortDeviceServer: Perform any configuration required on the port.
connect() - Method in class com.ergotech.secs.HSMSActiveWrapper: Connected the session.
connect() - Method in class com.ergotech.secs.HSMSPassiveWrapper: Connected the session.
connect() - Method in class com.ergotech.secs.SecsIWrapper: Connected the session.
connect() - Method in interface com.ergotech.secs.WrapperInterface: Connected the session.
connect(boolean) - Method in class com.ergotech.transsecs.secs.TransSecsController: Connect to the equipment or listen for a connection from the host.
connect(boolean) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Connect the two wrappers and add a pass through message handler to both.
connect() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will open the serial port and so connect to the device.
connect() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This will checkout a port and so connect to the device.
connect() - Method in class com.ergotech.vib.ports.SerialWrapper: This method will open the port and configure the streams.
ConnectableDataSource(OutPortConnectionInterface) - Constructor for class com.ergotech.vib.manipulators.PopupInitializer.ConnectableDataSource
CONNECTION_ACCEPTED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a connection is accepted in HSMS Passive Mode.
CONNECTION_CLOSING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a connection is closed.
CONNECTION_DROPPED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a connection is dropped.
ConnectionConfig - Class in com.ergotech.transsecs.secs
connectionConfig - Variable in class com.ergotech.transsecs.secs.TransSecsController: A convenient place for subclasses to save this if they need it.
ConnectionEventListener() - Constructor for class com.ergotech.transsecs.secs.TransSecsVoyeur.ConnectionEventListener
ConnectionManager - Class in com.ergotech.secs: The connection manager object is the superclass of the specific connection managers.
ConnectionManager() - Constructor for class com.ergotech.secs.ConnectionManager: Handles Simulation Modes.
ConnectionManagerInterface - Interface in com.ergotech.secs: This is the entire interface for a connection manager.
connections - Static variable in class TransSECS.GemIDConnection: All known connections.
connectors - Variable in class com.ergotech.vib.servers.DataSource: a Vector containing the valueChangedListeners, typically input beans or display beans, for this data souce
consoleLogger - Static variable in class com.ergotech.vib.servers.DataSource: This is the logger for this component.
Constant - Class in com.ergotech.vib.manipulators: This is a simple ValueObject creating component.
Constant() - Constructor for class com.ergotech.vib.manipulators.Constant: constructor
constantXSpacing - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: If set to false the numeric spacing between the x-column values will not be even.
contains(Object) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
containsAll(Collection<?>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
containsCaseInsensitive(String, List<String>) - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Check to see if the list contains the string regardless of case.
CONTENTION - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever a SECSI contention situation occurs.
control(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.DataValve: This method will be called when the flow control data source changes.
CONTROL_STATE_ATTEMPT_ONLINE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed into ATTEMPT_ONLINE The source of this message is the OnlineHandler and the user object is a string.
CONTROL_STATE_EQUIPMENT_OFFLINE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed into EQUIPMENT_OFFLINE
CONTROL_STATE_HOST_OFFLINE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed into HOST_OFFLINE The source of this message is the OnlineHandler and the user object is a string.
CONTROL_STATE_LOCAL_ONLINE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed into LOCAL_ONLINE The source of this message is the OnlineHandler and the user object is a string.
CONTROL_STATE_REMOTE_ONLINE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is changed into REMOTE_ONLINE The source of this message is the OnlineHandler and the user object is a string.
ControlLogixAddressBlock - Class in com.ergotech.vib.servers.ab: This is the address block for the Control Logix protocol.
ControlLogixAddressBlock(ControlLogixServer) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixAddressBlock: Constructor.
ControlLogixArrayServer - Class in com.ergotech.vib.servers.ab: This class reads arrays of objects from the control logix controller.
ControlLogixArrayServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixArrayServer: Default constructor.
ControlLogixBooleanServer - Class in com.ergotech.vib.servers.ab: Simple subclass that saves selecting the "Boolean" type.
ControlLogixBooleanServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixBooleanServer: Default constructor.
ControlLogixDataBlock - Class in com.ergotech.vib.servers.ab: This subclass adds the destination address to the data block.
ControlLogixDataBlock(List<String>, int, int) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Create the block with the list of tag names.
ControlLogixDataBlock(String, byte, ValueObjectInterface, int) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Create the block with a single tag and a value to write to the server.
ControlLogixEthernetDeviceServer - Class in com.ergotech.vib.servers.ab: This class provides the interface to the PLC.
ControlLogixEthernetDeviceServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: This sets the factory name.
ControlLogixEthernetDeviceServer.EIPPort - Class in com.ergotech.vib.servers.ab: This wraps the EtherNetIP instances.
ControlLogixEthernetDeviceServer.EIPPortFactory - Class in com.ergotech.vib.servers.ab: EIP implementation of a port factory.
ControlLogixEthernetDirectDeviceServer - Class in com.ergotech.vib.servers.ab: This class provides the interface to the PLC.
ControlLogixEthernetDirectDeviceServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: This sets the factory name.
ControlLogixIntServer - Class in com.ergotech.vib.servers.ab: Simple subclass that saves selecting the "Boolean" type.
ControlLogixIntServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixIntServer: Default constructor.
ControlLogixRealServer - Class in com.ergotech.vib.servers.ab: Simple subclass that saves selecting the "Real" type.
ControlLogixRealServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixRealServer: Default constructor.
ControlLogixResponseDataBlock - Class in com.ergotech.vib.servers.ab: This subclass adds the destination address to the data block.
ControlLogixResponseDataBlock(ValueObjectInterface[]) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixResponseDataBlock: Create the block with the list of tag names.
ControlLogixServer - Class in com.ergotech.vib.servers.ab: This is the abstract superclass of the Logix Ethernet protocol.
ControlLogixServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixServer: Default constructor.
ControlLogixStringServer - Class in com.ergotech.vib.servers.ab: Simple subclass that saves selecting the "String" type.
ControlLogixStringServer() - Constructor for class com.ergotech.vib.servers.ab.ControlLogixStringServer: Default constructor.
controlStateValueInput(ValueChangedEvent) - Method in class com.ergotech.secs.gem.OnlineHandler: This is the input to this component from the "ControlState" server.
convert(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemVID: Converts the value object to a SecsFormatValueObject.
convertByteArray(byte[]) - Method in class com.ergotech.transsecs.secs.PublishBean: Returns a StringValueObject for the given byte[].
convertData(SecsFormat, Object[]) - Method in class com.ergotech.secs.SecsMsg
convertData(SecsFormat, Object[], Vector) - Method in class com.ergotech.secs.SecsMsg
convertData(SecsFormat, String, Vector) - Method in class com.ergotech.secs.SecsMsg: Recursively interpret the data structures for messages that have multiple formats embedded within a list (SecsFormat00) object.
convertDataRecursive(SecsFormat00, Object[], Vector) - Method in class com.ergotech.secs.SecsMsg: Recursively interpret the data structures for messages that have multiple formats embedded within a list (SecsFormat00) object.
convertDate(Date) - Method in class com.ergotech.secs.gem.GemHandler: This will return a date string in the form required by the CLOCK DDVAL.
convertException(SecsFormat) - Method in class com.ergotech.secs.S100F7: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F1: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F10: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F12: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F14: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F15: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F16: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F18: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F20: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F22: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F24: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F26: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F28: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F30: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F32: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F33: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F34: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F35: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F36: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F38: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F4: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F40: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F41: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F42: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F43: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F44: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F47: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F48: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F6: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S15F8: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F10: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F11: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F13: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F14: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F2: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F3: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F4: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F6: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S1F8: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F10: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F12: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F13: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F14: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F18: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F27: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F29: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F33: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F35: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F37: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F41: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F42: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F43: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F44: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F45: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F46: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F47: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F48: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F49: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S2F6: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S5F5: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F1: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F11: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F13: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F16: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F18: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F20: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F22: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F25: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F27: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F30: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S6F8: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S7F6: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.S7F8: This will check for exceptions in the structure.
convertException(SecsFormat) - Method in class com.ergotech.secs.SecsMsg
ConvertFromHex - Class in com.ergotech.vib.manipulators: Convert an int to a Hex (upper case)
ConvertFromHex() - Constructor for class com.ergotech.vib.manipulators.ConvertFromHex: Default constructor.
convertFromSecsFormat00(SecsFormat00) - Static method in class com.ergotech.transsecs.secs.PublishBean: Recursively add SecsFormat00 elements to an array value object.
convertSecsFormat(SecsFormat) - Static method in class com.ergotech.transsecs.secs.PublishBean: This will return a ValueObjectInterface for a SecsFormat...
convertString(String, ClassLoader) - Static method in class com.ergotech.vib.utils.Utils: This will convert a String in the form (param1 = xxxx, param2 = "stringy", ...) into a hashtable that has key param1 and value xxxx.
convertToBytes(SecsMsg) - Method in class com.ergotech.secs.HSMSSessionManager: Converts a SecsMsg into the raw byte stream.
convertToBytes(SecsMsg) - Method in interface com.ergotech.secs.MsgManager
convertToBytes(SecsMsg) - Method in class com.ergotech.secs.SecsISessionManager: Converts a SecsMsg into the raw byte stream.
convertToBytes(SecsMsg) - Method in class com.ergotech.secs.SessionManager: Convert a SecsMsg to a byte stream suitable for passing through whatever port we are using.
convertToHashtable(String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager: Sets the Hashtable value a comma delimited string in the form:
ConvertToHex - Class in com.ergotech.vib.manipulators: Convert an int to a Hex (upper case)
ConvertToHex() - Constructor for class com.ergotech.vib.manipulators.ConvertToHex: Default constructor.
convertToLowestPrecisionNumber() - Method in class com.ergotech.vib.valueobjects.StringValueObject: This will convert the StringValueObject to the lowest precision type, either a LongValueObject or a DoubleValueObject.
convertToLowestPrecisionNumber() - Method in class com.ergotech.vib.valueobjects.ValueObject: This returns the ValueObject unadulterated.
convertToLowestPrecisionNumber() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will convert the value object type to the lowest precision numeric type, without loss of precision.
convertToSecsFormat(ValueObjectInterface) - Static method in class com.ergotech.transsecs.secs.SecsFormat99: This will return a SecsFormat for a given ValueObject.
convertToSecsFormat(ArrayValueObject) - Static method in class com.ergotech.transsecs.secs.SecsFormat99: Returns a SecsFormat00 from an ArrayValueObject by calling convertSecsFormat on each element.
copy() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return a full copy of the ValueObject.
copy() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns a shallow copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns a deep copy of the value object if possible.
copy() - Method in class com.ergotech.vib.valueobjects.HistoricalValueObject: This will return a full copy of the ValueObject.
copy() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns a deep copy of the value object.
copy() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns a deep copy of the value object.
copy() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return a full copy of the ValueObject.
copyObject(Serializable) - Method in class com.ergotech.vib.valueobjects.GenericValueObject: make a copy of any serializable object
Counter - Class in com.ergotech.vib.manipulators: This manipulator will increase its current integer value by the incrementAmount when triggered, if counting up, until it reaches its maximum.
Counter() - Constructor for class com.ergotech.vib.manipulators.Counter: Generic Constructor.
CP243DeviceServer - Class in com.ergotech.vib.servers.ppi: Driver for the S7-200 PLC via the CP243 interface.
CP243DeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.CP243DeviceServer: Default constructor.
CP243ITDeviceServer - Class in com.ergotech.vib.servers.ppi
CP243ITDeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.CP243ITDeviceServer: Default constructor.
CP243SlaveDeviceServer - Class in com.ergotech.vib.servers.ppi: This server listens for incoming message from a Siemens PLC.
CP243SlaveDeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: The default constructor.
CP243SlaveDeviceServer.PPITarget - Class in com.ergotech.vib.servers.ppi
CP343DeviceServer - Class in com.ergotech.vib.servers.ppi: Driver for the CP343 Module.
CP343DeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.CP343DeviceServer: Default constructor.
CPACK - Class in com.ergotech.secs: Command Parameter Acknoowledge Code, 1 Byte - Used in S2F42 This is a one byte binary (Format 10) data structure that has the following values:
CPACK(byte) - Constructor for class com.ergotech.secs.CPACK: Create a new message from a byte data type.
CPACK(SecsFormat) - Constructor for class com.ergotech.secs.CPACK
CPNAME - Class in com.ergotech.secs
CPNAME(String) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with ASCII (format 20) data.
CPNAME(long) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with an 8-Byte integer (SecsFormat30).
CPNAME(byte) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with an 1-Byte integer (SecsFormat31).
CPNAME(short) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with an 2-Byte integer (SecsFormat32).
CPNAME(int) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with an 4-Byte integer (SecsFormat34).
CPNAME(SecsFormat) - Constructor for class com.ergotech.secs.CPNAME: Create a new message with the data contained in a SecsFormat object.
CPNAMEVALPAIR - Class in com.ergotech.secs: CPNAMEVALPAIR Used in S16F5,S16F27 consists of data elements CPNAME CPVAL
CPNAMEVALPAIR() - Constructor for class com.ergotech.secs.CPNAMEVALPAIR
CPNAMEVALPAIR(CPNAME, CPVAL) - Constructor for class com.ergotech.secs.CPNAMEVALPAIR
CPNAMEVALPAIR(SecsFormat00) - Constructor for class com.ergotech.secs.CPNAMEVALPAIR
CPULoad - Class in com.ergotech.vib.servers: This is a data source for getting the cpu load on the MIX runtime system.
CPULoad() - Constructor for class com.ergotech.vib.servers.CPULoad: The default constructor.
CPVAL - Class in com.ergotech.secs: Command Parameter Value.
CPVAL(String) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with ASCII (format 20) data.
CPVAL(boolean) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with Boolean (SecsFormat11) data.
CPVAL(float) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 4-Byte floating point number (SecsFormat44).
CPVAL(double) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 8-Byte floating point number (SecsFormat40).
CPVAL(long) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 8-Byte integer (SecsFormat30).
CPVAL(byte) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 1-Byte integer (SecsFormat31).
CPVAL(short) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 2-Byte integer (SecsFormat32).
CPVAL(int) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with an 4-Byte integer (SecsFormat34).
CPVAL(SecsFormat) - Constructor for class com.ergotech.secs.CPVAL: Create a new message with the data contained in a SecsFormat object.
CR - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: CR - 0x0D
createConnection(String) - Static method in class TransSECS.GemIDConnection: Called from C# to create the instance.
createDevices() - Method in class com.ergotech.transsecs.secs.TransSecsController: Return true if the ReferencedDevices needs to be instantiated.
createListener() - Method in class com.ergotech.vib.servers.fins.FinsPLC: Create Listener.
createListener() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: Create Listener.
createListener() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlave: Create Listener.
createListener() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
createListener() - Static method in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave: Create Listener.
createMessage(byte[]) - Method in class com.ergotech.secs.HSMSSessionManager: Creates a SecsMsg from the raw byte stream.
createMessage(byte[]) - Method in class com.ergotech.secs.SecsISessionManager: Creates a SecsMsg from the raw byte stream.
createMessage(byte[]) - Method in class com.ergotech.secs.SessionManager: This method will convert the provided byte stream into a secs message.
createMessage() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Create the message.
createMessage() - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Create the secs message.
createMessage() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Create the secs message.
createMsg(int, int, byte[]) - Static method in class com.ergotech.secs.SecsMsg: This will create an instance of a message SF This will send the the raw, unconverted msg into the new message but it will not unconvert or interpret the header information.
createProcessImage() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Create the process image..
createProcessImage() - Static method in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave: Create the process image..
createRTUListener() - Static method in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave: Create RTU Listener
createSecsFormat3x5x(int, long) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Return the correct SecsFormat5x for the given type and value.
createSecsFormatObject(int, int) - Method in class com.ergotech.secs.SecsMsg: Creates a SecsFormat object based on the format code and the size.
createServer(String, String) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This method should never be called since "availableServers" returns null.
createServer(String, String) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: This method should never be called since "availableServers" returns null.
createServer(String, String) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: This method should never be called since "availableServers" returns null.
createServer(String, String) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Create the server.
createServer(String, String) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: This method should never be called since "availableServers" returns null.
createSessionManager(int, String, int, int, Class) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given port host and string.
createSessionManager(int, String, int, int, Class, LoggerInterface) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given port host and string.
createSessionManager(ConnectionManager, int, int) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given connection manager.
createSessionManager(ConnectionManager, int, int, LoggerInterface) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given connection manager.
createSocketImpl() - Method in class com.ergotech.vib.ports.TimeoutSocketFactory
CSAACK - Class in com.ergotech.secs: Equipment Acknowledge Code (CSAACK) Data Decoder, used in S2F8.
CSAACK(byte[]) - Constructor for class com.ergotech.secs.CSAACK: Create a new message with binary (format 10) data.
CSAACK(SecsFormat) - Constructor for class com.ergotech.secs.CSAACK: Create a new message with data contained in a SecsFormat object.
csvFolder - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The folder in which optional CSV files are stored.
CTLJOBCMD - Class in com.ergotech.secs: CTLJOBCMD.
CTLJOBCMD(short) - Constructor for class com.ergotech.secs.CTLJOBCMD: Create a new message with a short (SecsFormat51).
CTLJOBCMD(int) - Constructor for class com.ergotech.secs.CTLJOBCMD
CTLJOBCMD(byte) - Constructor for class com.ergotech.secs.CTLJOBCMD
CTLJOBCMD(SecsFormat) - Constructor for class com.ergotech.secs.CTLJOBCMD: Create a new message with the data contained in a SecsFormat object.
CTLJOBID - Class in com.ergotech.secs: CTLJOBID.
CTLJOBID(String) - Constructor for class com.ergotech.secs.CTLJOBID: Create a new message with a String (SecsFormat20).
CTLJOBID(char[]) - Constructor for class com.ergotech.secs.CTLJOBID
CTLJOBID(SecsFormat) - Constructor for class com.ergotech.secs.CTLJOBID: Create a new message with the data contained in a SecsFormat object.
currentColor - Variable in class com.ergotech.vib.servers.DataSource: the Color for the currentValue (the color that would be sent if sendColors is true)
currentConnectionCount() - Method in class com.ergotech.secs.HSMSSocketManager: Returns the number of current connections on this socket.
currentErrorCount - Variable in class com.ergotech.vib.ports.PortDeviceServer: The current error count.
currentKeyInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Changes the value of the key that is currently being sent to the selected output data source.
currentPosition - Variable in class com.ergotech.secs.SecsFormat00: This is a convienence variable.
currentValue(GemHostModel.GemValueVariable) - Static method in class com.ergotech.secs.JSONEncodeDecode: Return a valid SecsFormat representing the value in the provided value object.
currentValue - Variable in class com.ergotech.vib.servers.DataSource: a ValueObject containing the current value of this data source
customTimer - Variable in class com.ergotech.vib.servers.SimpleDataSource: A variable that indicates we need our own Timer.
CV - Variable in class com.ergotech.vib.manipulators.spc.PidControl
cvsRev - Static variable in class com.ergotech.secs.ABS
cvsRev - Static variable in class com.ergotech.secs.ACKA
cvsRev - Static variable in class com.ergotech.secs.ACKC1
cvsRev - Static variable in class com.ergotech.secs.ACKC10
cvsRev - Static variable in class com.ergotech.secs.ACKC5
cvsRev - Static variable in class com.ergotech.secs.ACKC6
cvsRev - Static variable in class com.ergotech.secs.ACKC7
cvsRev - Static variable in class com.ergotech.secs.AGENT
cvsRev - Static variable in class com.ergotech.secs.ALCD
cvsRev - Static variable in class com.ergotech.secs.ALED
cvsRev - Static variable in class com.ergotech.secs.AREYOUTHERE
cvsRev - Static variable in class com.ergotech.secs.ATTRDATA
cvsRev - Static variable in class com.ergotech.secs.ATTRID
cvsRev - Static variable in class com.ergotech.secs.CARRIERID
cvsRev - Static variable in class com.ergotech.secs.CarrierSlotData
cvsRev - Static variable in class com.ergotech.secs.CEED
cvsRev - Static variable in class com.ergotech.secs.CEID
cvsRev - Static variable in class com.ergotech.secs.CEPACK
cvsRev - Static variable in class com.ergotech.secs.CEPVAL
cvsRev - Static variable in class com.ergotech.secs.CMDA
cvsRev - Static variable in class com.ergotech.secs.COMMACK
cvsRev - Static variable in interface com.ergotech.secs.ConnectionManagerInterface
cvsRev - Static variable in class com.ergotech.secs.CPACK
cvsRev - Static variable in class com.ergotech.secs.CPNAME
cvsRev - Static variable in class com.ergotech.secs.CPNAMEVALPAIR
cvsRev - Static variable in class com.ergotech.secs.CPVAL
cvsRev - Static variable in class com.ergotech.secs.CSAACK
cvsRev - Static variable in class com.ergotech.secs.CTLJOBCMD
cvsRev - Static variable in class com.ergotech.secs.CTLJOBID
cvsRev - Static variable in class com.ergotech.secs.DATAID
cvsRev - Static variable in class com.ergotech.secs.DATALENGTH
cvsRev - Static variable in class com.ergotech.secs.DRACK
cvsRev - Static variable in class com.ergotech.secs.DSID
cvsRev - Static variable in class com.ergotech.secs.DSPER
cvsRev - Static variable in class com.ergotech.secs.DVNAME
cvsRev - Static variable in class com.ergotech.secs.DVVAL
cvsRev - Static variable in class com.ergotech.secs.EAC
cvsRev - Static variable in class com.ergotech.secs.ECControllerHandler
cvsRev - Static variable in class com.ergotech.secs.ECDEF
cvsRev - Static variable in class com.ergotech.secs.ECID
cvsRev - Static variable in class com.ergotech.secs.ECMAX
cvsRev - Static variable in class com.ergotech.secs.ECMIN
cvsRev - Static variable in class com.ergotech.secs.ECNAME
cvsRev - Static variable in class com.ergotech.secs.ECVoyeurHandler
cvsRev - Static variable in class com.ergotech.secs.EDID
cvsRev - Static variable in class com.ergotech.secs.ERACK
cvsRev - Static variable in class com.ergotech.secs.ERControllerHandler
cvsRev - Static variable in class com.ergotech.secs.ERRCODE
cvsRev - Static variable in class com.ergotech.secs.ERRPAIR
cvsRev - Static variable in class com.ergotech.secs.ERRTEXT
cvsRev - Static variable in class com.ergotech.secs.ERVoyeurHandler
cvsRev - Static variable in class com.ergotech.secs.FCNID
cvsRev - Static variable in interface com.ergotech.secs.gem.AlarmWriter
cvsRev - Static variable in exception com.ergotech.secs.gem.DeclinedStateChangeException
cvsRev - Static variable in interface com.ergotech.secs.gem.ECIDValidationInterface
cvsRev - Static variable in class com.ergotech.secs.gem.GemAlarmsEnabled
cvsRev - Static variable in class com.ergotech.secs.gem.GemAlarmsSet
cvsRev - Static variable in class com.ergotech.secs.gem.GemALID
cvsRev - Static variable in class com.ergotech.secs.gem.GemDVNAME
cvsRev - Static variable in class com.ergotech.secs.gem.GemEventsEnabled
cvsRev - Static variable in exception com.ergotech.secs.gem.GemException
cvsRev - Static variable in class com.ergotech.secs.gem.GemLIMITID
cvsRev - Static variable in class com.ergotech.secs.gem.GemRPTID
cvsRev - Static variable in class com.ergotech.secs.gem.GemSpoolHandler
cvsRev - Static variable in class com.ergotech.secs.gem.GemSVID
cvsRev - Static variable in class com.ergotech.secs.gem.GemTimeFormat
cvsRev - Static variable in exception com.ergotech.secs.gem.InvalidECIDChangeException
cvsRev - Static variable in class com.ergotech.secs.gem.Log4JLogger
cvsRev - Static variable in class com.ergotech.secs.gem.Monitor
cvsRev - Static variable in class com.ergotech.secs.gem.OnlineHandler
cvsRev - Static variable in class com.ergotech.secs.gem.SecsFormatValueObject
cvsRev - Static variable in interface com.ergotech.secs.gem.StateChangeNotification
cvsRev - Static variable in class com.ergotech.secs.gem.TraceServer
cvsRev - Static variable in class com.ergotech.secs.GRANT
cvsRev - Static variable in class com.ergotech.secs.GRANT6
cvsRev - Static variable in class com.ergotech.secs.HCACK
cvsRev - Static variable in class com.ergotech.secs.HINTEG
cvsRev - Static variable in class com.ergotech.secs.HSMSActiveWrapper
cvsRev - Static variable in class com.ergotech.secs.HSMSPassiveWrapper
cvsRev - Static variable in class com.ergotech.secs.HSMSSocketListener
cvsRev - Static variable in class com.ergotech.secs.LENGTH
cvsRev - Static variable in class com.ergotech.secs.LIMITACK
cvsRev - Static variable in class com.ergotech.secs.LIMITID
cvsRev - Static variable in class com.ergotech.secs.LIMITMAX
cvsRev - Static variable in class com.ergotech.secs.LIMITMIN
cvsRev - Static variable in class com.ergotech.secs.LINKID
cvsRev - Static variable in class com.ergotech.secs.LinkTest
cvsRev - Static variable in class com.ergotech.secs.LOC
cvsRev - Static variable in class com.ergotech.secs.LOWERDB
cvsRev - Static variable in class com.ergotech.secs.LRACK
cvsRev - Static variable in class com.ergotech.secs.LVACK
cvsRev - Static variable in class com.ergotech.secs.MDLN
cvsRev - Static variable in interface com.ergotech.secs.MessageResponseInterface
cvsRev - Static variable in exception com.ergotech.secs.MessageSpooledException
cvsRev - Static variable in class com.ergotech.secs.MessageVerifier
cvsRev - Static variable in class com.ergotech.secs.MessageVerifierOneItem
cvsRev - Static variable in class com.ergotech.secs.MEXP
cvsRev - Static variable in class com.ergotech.secs.MF
cvsRev - Static variable in class com.ergotech.secs.MHEAD
cvsRev - Static variable in class com.ergotech.secs.MID
cvsRev - Static variable in class com.ergotech.secs.MMODE
cvsRev - Static variable in interface com.ergotech.secs.MsgManager
cvsRev - Static variable in class com.ergotech.secs.MultiBlockRequest
cvsRev - Static variable in class com.ergotech.secs.NetLogger
cvsRev - Static variable in class com.ergotech.secs.OBJID
cvsRev - Static variable in class com.ergotech.secs.OBJSPEC
cvsRev - Static variable in class com.ergotech.secs.OBJTOKEN
cvsRev - Static variable in class com.ergotech.secs.OBJTYPE
cvsRev - Static variable in class com.ergotech.secs.OFLACK
cvsRev - Static variable in class com.ergotech.secs.ONLACK
cvsRev - Static variable in class com.ergotech.secs.OPID
cvsRev - Static variable in class com.ergotech.secs.PassThroughMessageHandler
cvsRev - Static variable in class com.ergotech.secs.PFCD
cvsRev - Static variable in class com.ergotech.secs.PODEVENT
cvsRev - Static variable in class com.ergotech.secs.PortManager
cvsRev - Static variable in class com.ergotech.secs.PPBODY
cvsRev - Static variable in class com.ergotech.secs.PPGNT
cvsRev - Static variable in class com.ergotech.secs.PPID
cvsRev - Static variable in class com.ergotech.secs.PRCMDNAME
cvsRev - Static variable in class com.ergotech.secs.PREVENTID
cvsRev - Static variable in class com.ergotech.secs.PRJOBID
cvsRev - Static variable in class com.ergotech.secs.PRJOBMILESTONE
cvsRev - Static variable in class com.ergotech.secs.PRJOBSPACE
cvsRev - Static variable in class com.ergotech.secs.PRMTRLORDER
cvsRev - Static variable in class com.ergotech.secs.PRPAUSEEVENT
cvsRev - Static variable in class com.ergotech.secs.PRPROCESSSTART
cvsRev - Static variable in class com.ergotech.secs.PRRECIPEMETHOD
cvsRev - Static variable in class com.ergotech.secs.PRSTATE
cvsRev - Static variable in class com.ergotech.secs.RAC
cvsRev - Static variable in class com.ergotech.secs.RCMD
cvsRev - Static variable in class com.ergotech.secs.RCPATTRDATA
cvsRev - Static variable in class com.ergotech.secs.RCPATTRID
cvsRev - Static variable in class com.ergotech.secs.RCPBODY
cvsRev - Static variable in class com.ergotech.secs.RCPCLASS
cvsRev - Static variable in class com.ergotech.secs.RCPCMD
cvsRev - Static variable in class com.ergotech.secs.RCPDEL
cvsRev - Static variable in class com.ergotech.secs.RCPDESCLTH
cvsRev - Static variable in class com.ergotech.secs.RCPDESCNM
cvsRev - Static variable in class com.ergotech.secs.RCPDESCTIME
cvsRev - Static variable in class com.ergotech.secs.RCPID
cvsRev - Static variable in class com.ergotech.secs.RCPNAME
cvsRev - Static variable in class com.ergotech.secs.RCPNEWID
cvsRev - Static variable in class com.ergotech.secs.RCPOWCODE
cvsRev - Static variable in class com.ergotech.secs.RCPPAIR
cvsRev - Static variable in class com.ergotech.secs.RCPPARNM
cvsRev - Static variable in class com.ergotech.secs.RCPPARRULE
cvsRev - Static variable in class com.ergotech.secs.RCPPARVAL
cvsRev - Static variable in class com.ergotech.secs.RCPRENAME
cvsRev - Static variable in class com.ergotech.secs.RCPSECCODE
cvsRev - Static variable in class com.ergotech.secs.RCPSECNM
cvsRev - Static variable in class com.ergotech.secs.RCPSPEC
cvsRev - Static variable in class com.ergotech.secs.RCPSTAT
cvsRev - Static variable in class com.ergotech.secs.RCPUPDT
cvsRev - Static variable in class com.ergotech.secs.RCPVERS
cvsRev - Static variable in class com.ergotech.secs.REPGSZ
cvsRev - Static variable in class com.ergotech.secs.RESETENA
cvsRev - Static variable in class com.ergotech.secs.RESPEC
cvsRev - Static variable in class com.ergotech.secs.RIC
cvsRev - Static variable in class com.ergotech.secs.RMACK
cvsRev - Static variable in class com.ergotech.secs.RMCHGSTAT
cvsRev - Static variable in class com.ergotech.secs.RMCHGTYPE
cvsRev - Static variable in class com.ergotech.secs.RMDATASIZE
cvsRev - Static variable in class com.ergotech.secs.RMGRNT
cvsRev - Static variable in class com.ergotech.secs.RMNEWNS
cvsRev - Static variable in class com.ergotech.secs.RMNSCMD
cvsRev - Static variable in class com.ergotech.secs.RMNSSPEC
cvsRev - Static variable in class com.ergotech.secs.RMRECSPEC
cvsRev - Static variable in class com.ergotech.secs.RMREQUESTOR
cvsRev - Static variable in class com.ergotech.secs.RMSEGSPEC
cvsRev - Static variable in class com.ergotech.secs.RMSPACE
cvsRev - Static variable in class com.ergotech.secs.RPTID
cvsRev - Static variable in class com.ergotech.secs.RSDA
cvsRev - Static variable in class com.ergotech.secs.RSDC
cvsRev - Static variable in class com.ergotech.secs.RSPACK
cvsRev - Static variable in class com.ergotech.secs.S0F0
cvsRev - Static variable in class com.ergotech.secs.S100F1
cvsRev - Static variable in class com.ergotech.secs.S100F10
cvsRev - Static variable in class com.ergotech.secs.S100F105
cvsRev - Static variable in class com.ergotech.secs.S100F11
cvsRev - Static variable in class com.ergotech.secs.S100F13
cvsRev - Static variable in class com.ergotech.secs.S100F14
cvsRev - Static variable in class com.ergotech.secs.S100F15
cvsRev - Static variable in class com.ergotech.secs.S100F16
cvsRev - Static variable in class com.ergotech.secs.S100F17
cvsRev - Static variable in class com.ergotech.secs.S100F18
cvsRev - Static variable in class com.ergotech.secs.S100F2
cvsRev - Static variable in class com.ergotech.secs.S100F31
cvsRev - Static variable in class com.ergotech.secs.S100F32
cvsRev - Static variable in class com.ergotech.secs.S100F7
cvsRev - Static variable in class com.ergotech.secs.S100F8
cvsRev - Static variable in class com.ergotech.secs.S100F9
cvsRev - Static variable in class com.ergotech.secs.S10F0
cvsRev - Static variable in class com.ergotech.secs.S10F1
cvsRev - Static variable in class com.ergotech.secs.S10F2
cvsRev - Static variable in class com.ergotech.secs.S10F3
cvsRev - Static variable in class com.ergotech.secs.S10F4
cvsRev - Static variable in class com.ergotech.secs.S10F5
cvsRev - Static variable in class com.ergotech.secs.S10F6
cvsRev - Static variable in class com.ergotech.secs.S15F0
cvsRev - Static variable in class com.ergotech.secs.S15F1
cvsRev - Static variable in class com.ergotech.secs.S15F10
cvsRev - Static variable in class com.ergotech.secs.S15F11
cvsRev - Static variable in class com.ergotech.secs.S15F12
cvsRev - Static variable in class com.ergotech.secs.S15F13
cvsRev - Static variable in class com.ergotech.secs.S15F14
cvsRev - Static variable in class com.ergotech.secs.S15F15
cvsRev - Static variable in class com.ergotech.secs.S15F16
cvsRev - Static variable in class com.ergotech.secs.S15F17
cvsRev - Static variable in class com.ergotech.secs.S15F18
cvsRev - Static variable in class com.ergotech.secs.S15F19
cvsRev - Static variable in class com.ergotech.secs.S15F2
cvsRev - Static variable in class com.ergotech.secs.S15F20
cvsRev - Static variable in class com.ergotech.secs.S15F21
cvsRev - Static variable in class com.ergotech.secs.S15F22
cvsRev - Static variable in class com.ergotech.secs.S15F23
cvsRev - Static variable in class com.ergotech.secs.S15F24
cvsRev - Static variable in class com.ergotech.secs.S15F25
cvsRev - Static variable in class com.ergotech.secs.S15F26
cvsRev - Static variable in class com.ergotech.secs.S15F27
cvsRev - Static variable in class com.ergotech.secs.S15F28
cvsRev - Static variable in class com.ergotech.secs.S15F29
cvsRev - Static variable in class com.ergotech.secs.S15F3
cvsRev - Static variable in class com.ergotech.secs.S15F30
cvsRev - Static variable in class com.ergotech.secs.S15F31
cvsRev - Static variable in class com.ergotech.secs.S15F32
cvsRev - Static variable in class com.ergotech.secs.S15F33
cvsRev - Static variable in class com.ergotech.secs.S15F34
cvsRev - Static variable in class com.ergotech.secs.S15F35
cvsRev - Static variable in class com.ergotech.secs.S15F36
cvsRev - Static variable in class com.ergotech.secs.S15F37
cvsRev - Static variable in class com.ergotech.secs.S15F38
cvsRev - Static variable in class com.ergotech.secs.S15F39
cvsRev - Static variable in class com.ergotech.secs.S15F4
cvsRev - Static variable in class com.ergotech.secs.S15F40
cvsRev - Static variable in class com.ergotech.secs.S15F41
cvsRev - Static variable in class com.ergotech.secs.S15F42
cvsRev - Static variable in class com.ergotech.secs.S15F43
cvsRev - Static variable in class com.ergotech.secs.S15F44
cvsRev - Static variable in class com.ergotech.secs.S15F45
cvsRev - Static variable in class com.ergotech.secs.S15F46
cvsRev - Static variable in class com.ergotech.secs.S15F47
cvsRev - Static variable in class com.ergotech.secs.S15F48
cvsRev - Static variable in class com.ergotech.secs.S15F5
cvsRev - Static variable in class com.ergotech.secs.S15F6
cvsRev - Static variable in class com.ergotech.secs.S15F7
cvsRev - Static variable in class com.ergotech.secs.S15F8
cvsRev - Static variable in class com.ergotech.secs.S15F9
cvsRev - Static variable in class com.ergotech.secs.S1F0
cvsRev - Static variable in class com.ergotech.secs.S1F1
cvsRev - Static variable in class com.ergotech.secs.S1F10
cvsRev - Static variable in class com.ergotech.secs.S1F11
cvsRev - Static variable in class com.ergotech.secs.S1F12
cvsRev - Static variable in class com.ergotech.secs.S1F13
cvsRev - Static variable in class com.ergotech.secs.S1F14
cvsRev - Static variable in class com.ergotech.secs.S1F15
cvsRev - Static variable in class com.ergotech.secs.S1F16
cvsRev - Static variable in class com.ergotech.secs.S1F17
cvsRev - Static variable in class com.ergotech.secs.S1F18
cvsRev - Static variable in class com.ergotech.secs.S1F19
cvsRev - Static variable in class com.ergotech.secs.S1F2
cvsRev - Static variable in class com.ergotech.secs.S1F20
cvsRev - Static variable in class com.ergotech.secs.S1F3
cvsRev - Static variable in class com.ergotech.secs.S1F4
cvsRev - Static variable in class com.ergotech.secs.S1F5
cvsRev - Static variable in class com.ergotech.secs.S1F6
cvsRev - Static variable in class com.ergotech.secs.S1F7
cvsRev - Static variable in class com.ergotech.secs.S1F8
cvsRev - Static variable in class com.ergotech.secs.S1F9
cvsRev - Static variable in class com.ergotech.secs.S2F0
cvsRev - Static variable in class com.ergotech.secs.S2F1
cvsRev - Static variable in class com.ergotech.secs.S2F10
cvsRev - Static variable in class com.ergotech.secs.S2F11
cvsRev - Static variable in class com.ergotech.secs.S2F12
cvsRev - Static variable in class com.ergotech.secs.S2F13
cvsRev - Static variable in class com.ergotech.secs.S2F14
cvsRev - Static variable in class com.ergotech.secs.S2F15
cvsRev - Static variable in class com.ergotech.secs.S2F16
cvsRev - Static variable in class com.ergotech.secs.S2F17
cvsRev - Static variable in class com.ergotech.secs.S2F18
cvsRev - Static variable in class com.ergotech.secs.S2F19
cvsRev - Static variable in class com.ergotech.secs.S2F2
cvsRev - Static variable in class com.ergotech.secs.S2F20
cvsRev - Static variable in class com.ergotech.secs.S2F21
cvsRev - Static variable in class com.ergotech.secs.S2F22
cvsRev - Static variable in class com.ergotech.secs.S2F23
cvsRev - Static variable in class com.ergotech.secs.S2F24
cvsRev - Static variable in class com.ergotech.secs.S2F25
cvsRev - Static variable in class com.ergotech.secs.S2F26
cvsRev - Static variable in class com.ergotech.secs.S2F27
cvsRev - Static variable in class com.ergotech.secs.S2F28
cvsRev - Static variable in class com.ergotech.secs.S2F29
cvsRev - Static variable in class com.ergotech.secs.S2F3
cvsRev - Static variable in class com.ergotech.secs.S2F30
cvsRev - Static variable in class com.ergotech.secs.S2F31
cvsRev - Static variable in class com.ergotech.secs.S2F32
cvsRev - Static variable in class com.ergotech.secs.S2F33
cvsRev - Static variable in class com.ergotech.secs.S2F34
cvsRev - Static variable in class com.ergotech.secs.S2F35
cvsRev - Static variable in class com.ergotech.secs.S2F36
cvsRev - Static variable in class com.ergotech.secs.S2F37
cvsRev - Static variable in class com.ergotech.secs.S2F38
cvsRev - Static variable in class com.ergotech.secs.S2F39
cvsRev - Static variable in class com.ergotech.secs.S2F4
cvsRev - Static variable in class com.ergotech.secs.S2F40
cvsRev - Static variable in class com.ergotech.secs.S2F41
cvsRev - Static variable in class com.ergotech.secs.S2F42
cvsRev - Static variable in class com.ergotech.secs.S2F43
cvsRev - Static variable in class com.ergotech.secs.S2F44
cvsRev - Static variable in class com.ergotech.secs.S2F45
cvsRev - Static variable in class com.ergotech.secs.S2F46
cvsRev - Static variable in class com.ergotech.secs.S2F47
cvsRev - Static variable in class com.ergotech.secs.S2F48
cvsRev - Static variable in class com.ergotech.secs.S2F49
cvsRev - Static variable in class com.ergotech.secs.S2F5
cvsRev - Static variable in class com.ergotech.secs.S2F50
cvsRev - Static variable in class com.ergotech.secs.S2F6
cvsRev - Static variable in class com.ergotech.secs.S2F7
cvsRev - Static variable in class com.ergotech.secs.S2F8
cvsRev - Static variable in class com.ergotech.secs.S2F9
cvsRev - Static variable in class com.ergotech.secs.S5F0
cvsRev - Static variable in class com.ergotech.secs.S5F1
cvsRev - Static variable in class com.ergotech.secs.S5F2
cvsRev - Static variable in class com.ergotech.secs.S5F3
cvsRev - Static variable in class com.ergotech.secs.S5F4
cvsRev - Static variable in class com.ergotech.secs.S5F5
cvsRev - Static variable in class com.ergotech.secs.S5F6
cvsRev - Static variable in class com.ergotech.secs.S5F7
cvsRev - Static variable in class com.ergotech.secs.S5F8
cvsRev - Static variable in class com.ergotech.secs.S6F0
cvsRev - Static variable in class com.ergotech.secs.S6F1
cvsRev - Static variable in class com.ergotech.secs.S6F10
cvsRev - Static variable in class com.ergotech.secs.S6F11
cvsRev - Static variable in class com.ergotech.secs.S6F12
cvsRev - Static variable in class com.ergotech.secs.S6F13
cvsRev - Static variable in class com.ergotech.secs.S6F14
cvsRev - Static variable in class com.ergotech.secs.S6F15
cvsRev - Static variable in class com.ergotech.secs.S6F16
cvsRev - Static variable in class com.ergotech.secs.S6F17
cvsRev - Static variable in class com.ergotech.secs.S6F18
cvsRev - Static variable in class com.ergotech.secs.S6F19
cvsRev - Static variable in class com.ergotech.secs.S6F2
cvsRev - Static variable in class com.ergotech.secs.S6F20
cvsRev - Static variable in class com.ergotech.secs.S6F21
cvsRev - Static variable in class com.ergotech.secs.S6F22
cvsRev - Static variable in class com.ergotech.secs.S6F23
cvsRev - Static variable in class com.ergotech.secs.S6F24
cvsRev - Static variable in class com.ergotech.secs.S6F25
cvsRev - Static variable in class com.ergotech.secs.S6F26
cvsRev - Static variable in class com.ergotech.secs.S6F27
cvsRev - Static variable in class com.ergotech.secs.S6F28
cvsRev - Static variable in class com.ergotech.secs.S6F29
cvsRev - Static variable in class com.ergotech.secs.S6F3
cvsRev - Static variable in class com.ergotech.secs.S6F30
cvsRev - Static variable in class com.ergotech.secs.S6F4
cvsRev - Static variable in class com.ergotech.secs.S6F5
cvsRev - Static variable in class com.ergotech.secs.S6F6
cvsRev - Static variable in class com.ergotech.secs.S6F7
cvsRev - Static variable in class com.ergotech.secs.S6F8
cvsRev - Static variable in class com.ergotech.secs.S6F9
cvsRev - Static variable in class com.ergotech.secs.S6F99
cvsRev - Static variable in class com.ergotech.secs.S7F0
cvsRev - Static variable in class com.ergotech.secs.S7F1
cvsRev - Static variable in class com.ergotech.secs.S7F10
cvsRev - Static variable in class com.ergotech.secs.S7F11
cvsRev - Static variable in class com.ergotech.secs.S7F12
cvsRev - Static variable in class com.ergotech.secs.S7F13
cvsRev - Static variable in class com.ergotech.secs.S7F14
cvsRev - Static variable in class com.ergotech.secs.S7F15
cvsRev - Static variable in class com.ergotech.secs.S7F16
cvsRev - Static variable in class com.ergotech.secs.S7F17
cvsRev - Static variable in class com.ergotech.secs.S7F18
cvsRev - Static variable in class com.ergotech.secs.S7F19
cvsRev - Static variable in class com.ergotech.secs.S7F2
cvsRev - Static variable in class com.ergotech.secs.S7F20
cvsRev - Static variable in class com.ergotech.secs.S7F3
cvsRev - Static variable in class com.ergotech.secs.S7F4
cvsRev - Static variable in class com.ergotech.secs.S7F5
cvsRev - Static variable in class com.ergotech.secs.S7F6
cvsRev - Static variable in class com.ergotech.secs.S7F7
cvsRev - Static variable in class com.ergotech.secs.S7F8
cvsRev - Static variable in class com.ergotech.secs.S7F9
cvsRev - Static variable in class com.ergotech.secs.S99F3
cvsRev - Static variable in class com.ergotech.secs.S9F0
cvsRev - Static variable in class com.ergotech.secs.S9F1
cvsRev - Static variable in class com.ergotech.secs.S9F11
cvsRev - Static variable in class com.ergotech.secs.S9F13
cvsRev - Static variable in class com.ergotech.secs.S9F3
cvsRev - Static variable in class com.ergotech.secs.S9F5
cvsRev - Static variable in class com.ergotech.secs.S9F7
cvsRev - Static variable in class com.ergotech.secs.S9F9
cvsRev - Static variable in class com.ergotech.secs.SARM
cvsRev - Static variable in exception com.ergotech.secs.SecsCommunicationsFailureException
cvsRev - Static variable in class com.ergotech.secs.SecsDataStructure
cvsRev - Static variable in class com.ergotech.secs.SecsEvent
cvsRev - Static variable in interface com.ergotech.secs.SecsEventListener
cvsRev - Static variable in exception com.ergotech.secs.SecsException
cvsRev - Static variable in class com.ergotech.secs.SecsFormat00
cvsRev - Static variable in class com.ergotech.secs.SecsFormat10
cvsRev - Static variable in class com.ergotech.secs.SecsFormat22
cvsRev - Static variable in class com.ergotech.secs.SecsFormat31
cvsRev - Static variable in class com.ergotech.secs.SecsFormat32
cvsRev - Static variable in class com.ergotech.secs.SecsFormat34
cvsRev - Static variable in interface com.ergotech.secs.SecsFormat3x
cvsRev - Static variable in class com.ergotech.secs.SecsFormat44
cvsRev - Static variable in interface com.ergotech.secs.SecsFormat4x
cvsRev - Static variable in class com.ergotech.secs.SecsFormat51
cvsRev - Static variable in class com.ergotech.secs.SecsFormat52
cvsRev - Static variable in class com.ergotech.secs.SecsFormat54
cvsRev - Static variable in interface com.ergotech.secs.SecsFormat5x
cvsRev - Static variable in exception com.ergotech.secs.SecsHSMSDeselectException
cvsRev - Static variable in exception com.ergotech.secs.SecsHSMSRejectException
cvsRev - Static variable in exception com.ergotech.secs.SecsIChecksumException
cvsRev - Static variable in class com.ergotech.secs.SecsISessionManager
cvsRev - Static variable in class com.ergotech.secs.SecsISocketManager
cvsRev - Static variable in class com.ergotech.secs.SecsIWrapper
cvsRev - Static variable in class com.ergotech.secs.SecsMsg
cvsRev - Static variable in class com.ergotech.secs.SecsTrigger
cvsRev - Static variable in exception com.ergotech.secs.SecsValueOutOfRangeException
cvsRev - Static variable in class com.ergotech.secs.SerialPortManager
cvsRev - Static variable in class com.ergotech.secs.SessionManagerTimeoutTimer
cvsRev - Static variable in class com.ergotech.secs.SFCD
cvsRev - Static variable in class com.ergotech.secs.SHEAD
cvsRev - Static variable in class com.ergotech.secs.SLOTID
cvsRev - Static variable in class com.ergotech.secs.SMPLN
cvsRev - Static variable in class com.ergotech.secs.SPAACK
cvsRev - Static variable in class com.ergotech.secs.SPD
cvsRev - Static variable in class com.ergotech.secs.SPID
cvsRev - Static variable in interface com.ergotech.secs.SpoolHandler
cvsRev - Static variable in class com.ergotech.secs.SPR
cvsRev - Static variable in class com.ergotech.secs.STIME
cvsRev - Static variable in class com.ergotech.secs.STRACK
cvsRev - Static variable in class com.ergotech.secs.STRID
cvsRev - Static variable in class com.ergotech.secs.SV
cvsRev - Static variable in class com.ergotech.secs.SVID
cvsRev - Static variable in class com.ergotech.secs.SVNAME
cvsRev - Static variable in class com.ergotech.secs.SyslogLogger
cvsRev - Static variable in interface com.ergotech.secs.SystemHandlerInterface
cvsRev - Static variable in class com.ergotech.secs.TAGSER
cvsRev - Static variable in class com.ergotech.secs.TAGSN
cvsRev - Static variable in class com.ergotech.secs.TARGETSPEC
cvsRev - Static variable in class com.ergotech.secs.TerminalServerPortManager
cvsRev - Static variable in class com.ergotech.secs.TerminalServerWrapper
cvsRev - Static variable in class com.ergotech.secs.TEXT
cvsRev - Static variable in class com.ergotech.secs.TIAACK
cvsRev - Static variable in class com.ergotech.secs.TIACK
cvsRev - Static variable in class com.ergotech.secs.TID
cvsRev - Static variable in class com.ergotech.secs.TIME
cvsRev - Static variable in class com.ergotech.secs.TIMEFORMAT
cvsRev - Static variable in class com.ergotech.secs.TIMESTAMP
cvsRev - Static variable in class com.ergotech.secs.TOTSMP
cvsRev - Static variable in class com.ergotech.secs.TransactionManager
cvsRev - Static variable in class com.ergotech.secs.TRID
cvsRev - Static variable in class com.ergotech.secs.TSIP
cvsRev - Static variable in class com.ergotech.secs.TSOP
cvsRev - Static variable in class com.ergotech.secs.UNITS
cvsRev - Static variable in interface com.ergotech.secs.UnrecoverableErrorInterface
cvsRev - Static variable in class com.ergotech.secs.UPPERDB
cvsRev - Static variable in class com.ergotech.secs.V
cvsRev - Static variable in class com.ergotech.secs.VID
cvsRev - Static variable in class com.ergotech.secs.VidVPair
cvsRev - Static variable in class com.ergotech.secs.VLAACK
cvsRev - Static variable in interface com.ergotech.secs.WrapperInterface
cvsRev - Static variable in class com.ergotech.transsecs.secs.FileRead: The Revision String.
cvsRev - Static variable in class com.ergotech.transsecs.secs.FileRecipeManager: The Revision String.
cvsRev - Static variable in interface com.ergotech.transsecs.secs.RecipeManagerInterface: The Revision String.
cvsRev - Static variable in class com.ergotech.transsecs.secs.SecsEventFilter
cvsRev - Static variable in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
cvsRev - Static variable in class com.ergotech.transsecs.secs.VIBInMessageBean
cvsRev - Static variable in class com.ergotech.transsecs.secs.VIBInOutMessageBean
cvsRev - Static variable in exception com.ergotech.vib.exceptions.BadParameterException
cvsRev - Static variable in exception com.ergotech.vib.exceptions.VIBUpdateFailedException
cvsRev - Static variable in class com.ergotech.vib.manipulators.Abs
cvsRev - Static variable in class com.ergotech.vib.manipulators.Add
cvsRev - Static variable in class com.ergotech.vib.manipulators.And
cvsRev - Static variable in class com.ergotech.vib.manipulators.array.ArrayBuilder
cvsRev - Static variable in class com.ergotech.vib.manipulators.array.ArrayElementFilter
cvsRev - Static variable in class com.ergotech.vib.manipulators.array.ArrayToString
cvsRev - Static variable in class com.ergotech.vib.manipulators.array.StringToArray
cvsRev - Static variable in class com.ergotech.vib.manipulators.BitSelector
cvsRev - Static variable in class com.ergotech.vib.manipulators.BitwiseAnd
cvsRev - Static variable in class com.ergotech.vib.manipulators.BitwiseOr
cvsRev - Static variable in class com.ergotech.vib.manipulators.BitwiseXor
cvsRev - Static variable in class com.ergotech.vib.manipulators.Blinker
cvsRev - Static variable in class com.ergotech.vib.manipulators.BroadcastServer
cvsRev - Static variable in class com.ergotech.vib.manipulators.ByteBuilder
cvsRev - Static variable in class com.ergotech.vib.manipulators.ByteSplitter
cvsRev - Static variable in class com.ergotech.vib.manipulators.Ceiling
cvsRev - Static variable in class com.ergotech.vib.manipulators.Constant
cvsRev - Static variable in class com.ergotech.vib.manipulators.Counter
cvsRev - Static variable in class com.ergotech.vib.manipulators.DataValve
cvsRev - Static variable in class com.ergotech.vib.manipulators.datetime.DateCreator
cvsRev - Static variable in class com.ergotech.vib.manipulators.datetime.DateToLong
cvsRev - Static variable in class com.ergotech.vib.manipulators.datetime.GenericDateFormatter
cvsRev - Static variable in class com.ergotech.vib.manipulators.datetime.LongToDate
cvsRev - Static variable in class com.ergotech.vib.manipulators.DecimalFormatter
cvsRev - Static variable in class com.ergotech.vib.manipulators.Divide
cvsRev - Static variable in class com.ergotech.vib.manipulators.Emailer
cvsRev - Static variable in class com.ergotech.vib.manipulators.Equal
cvsRev - Static variable in class com.ergotech.vib.manipulators.Floor
cvsRev - Static variable in class com.ergotech.vib.manipulators.GenericCompare
cvsRev - Static variable in class com.ergotech.vib.manipulators.GreaterThan
cvsRev - Static variable in class com.ergotech.vib.manipulators.GreaterThanOrEqual
cvsRev - Static variable in class com.ergotech.vib.manipulators.IPAddressServer
cvsRev - Static variable in class com.ergotech.vib.manipulators.LessThan
cvsRev - Static variable in class com.ergotech.vib.manipulators.LessThanOrEqual
cvsRev - Static variable in class com.ergotech.vib.manipulators.Manipulator
cvsRev - Static variable in class com.ergotech.vib.manipulators.MasterBooleanCalculator
cvsRev - Static variable in class com.ergotech.vib.manipulators.MasterCalculator
cvsRev - Static variable in class com.ergotech.vib.manipulators.MasterComparer
cvsRev - Static variable in class com.ergotech.vib.manipulators.MasterMathConversions
cvsRev - Static variable in class com.ergotech.vib.manipulators.Multiply
cvsRev - Static variable in class com.ergotech.vib.manipulators.Not
cvsRev - Static variable in class com.ergotech.vib.manipulators.NotEqual
cvsRev - Static variable in class com.ergotech.vib.manipulators.Or
cvsRev - Static variable in class com.ergotech.vib.manipulators.PassOnThread
cvsRev - Static variable in class com.ergotech.vib.manipulators.PopupInitializer
cvsRev - Static variable in class com.ergotech.vib.manipulators.RateCalculator
cvsRev - Static variable in class com.ergotech.vib.manipulators.ReverseSign
cvsRev - Static variable in class com.ergotech.vib.manipulators.Round
cvsRev - Static variable in class com.ergotech.vib.manipulators.Scaler
cvsRev - Static variable in class com.ergotech.vib.manipulators.SerialPortManipulator
cvsRev - Static variable in class com.ergotech.vib.manipulators.SetValue
cvsRev - Static variable in class com.ergotech.vib.manipulators.SimpleManipulator
cvsRev - Static variable in class com.ergotech.vib.manipulators.SoundClipPlayer
cvsRev - Static variable in class com.ergotech.vib.manipulators.Square
cvsRev - Static variable in class com.ergotech.vib.manipulators.SquareRoot
cvsRev - Static variable in class com.ergotech.vib.manipulators.StartupTrigger
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.CodeToString
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.CombineStrings
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.RegularExpression
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.SQLSelectStatement
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.StringBuilder
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.StringLength
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.StringSplitter
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.StringTrimmer
cvsRev - Static variable in class com.ergotech.vib.manipulators.string.TokenReplace
cvsRev - Static variable in class com.ergotech.vib.manipulators.Subtract
cvsRev - Static variable in class com.ergotech.vib.manipulators.TimeDelayTrigger
cvsRev - Static variable in class com.ergotech.vib.manipulators.TrueFalseManipulator
cvsRev - Static variable in class com.ergotech.vib.manipulators.Xor
cvsRev - Static variable in class com.ergotech.vib.ports.BlueToothRFCommFactory
cvsRev - Static variable in class com.ergotech.vib.ports.Port
cvsRev - Static variable in class com.ergotech.vib.ports.PortFactory
cvsRev - Static variable in interface com.ergotech.vib.ports.PortFactoryInterface
cvsRev - Static variable in class com.ergotech.vib.ports.PortFactoryManager
cvsRev - Static variable in interface com.ergotech.vib.ports.PortInterface
cvsRev - Static variable in interface com.ergotech.vib.ports.PortPoolInterface
cvsRev - Static variable in class com.ergotech.vib.ports.serial.SerialPortDevice
cvsRev - Static variable in class com.ergotech.vib.ports.SerialPortFactory
cvsRev - Static variable in class com.ergotech.vib.ports.SerialWrapper
cvsRev - Static variable in class com.ergotech.vib.ports.TCPActivePortFactory
cvsRev - Static variable in class com.ergotech.vib.ports.TCPActiveSocket
cvsRev - Static variable in class com.ergotech.vib.ports.TCPPassivePortFactory
cvsRev - Static variable in class com.ergotech.vib.ports.TCPPassiveSocket
cvsRev - Static variable in class com.ergotech.vib.ports.UDPActivePortFactory
cvsRev - Static variable in class com.ergotech.vib.ports.UDPActiveSocket
cvsRev - Static variable in class com.ergotech.vib.ports.UDPPassivePortFactory
cvsRev - Static variable in class com.ergotech.vib.ports.UDPPassiveSocket
cvsRev - Static variable in class com.ergotech.vib.ports.UDPSocket
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixAddressBlock
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixBooleanServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixDataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixIntServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixRealServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixResponseDataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.ControlLogixStringServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.DF1DataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.DF1Server
cvsRev - Static variable in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.MicroLogixServer
cvsRev - Static variable in class com.ergotech.vib.servers.ab.PCCCRegisteredPortFactory
cvsRev - Static variable in class com.ergotech.vib.servers.ab.PCCCRegisteredSocket
cvsRev - Static variable in class com.ergotech.vib.servers.ArrayDataSource
cvsRev - Static variable in class com.ergotech.vib.servers.ExtremeServer
cvsRev - Static variable in class com.ergotech.vib.servers.fins.FinsDInt
cvsRev - Static variable in class com.ergotech.vib.servers.fins.FinsFloat
cvsRev - Static variable in class com.ergotech.vib.servers.fins.FinsPLC
cvsRev - Static variable in class com.ergotech.vib.servers.fins.FinsString
cvsRev - Static variable in class com.ergotech.vib.servers.IncrementServer
cvsRev - Static variable in class com.ergotech.vib.servers.MarqueeDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.MarqueeServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.Modbus0XServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.Modbus1XServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusDataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusDInt
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusFloat
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusInt
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusPresetSingleRegisterServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServerBase
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusString
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusStringArray
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.slave.ModbusSlave
cvsRev - Static variable in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
cvsRev - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
cvsRev - Static variable in class com.ergotech.vib.servers.plc.PLCDataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.plc.PLCDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.plc.PLCServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.CP243DeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.CP343DeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase
cvsRev - Static variable in class com.ergotech.vib.servers.ppi.S7Array
cvsRev - Static variable in class com.ergotech.vib.servers.RandomBoolean
cvsRev - Static variable in class com.ergotech.vib.servers.RandomData
cvsRev - Static variable in class com.ergotech.vib.servers.RandomStringServer
cvsRev - Static variable in class com.ergotech.vib.servers.SineServer
cvsRev - Static variable in class com.ergotech.vib.servers.StringServer
cvsRev - Static variable in class com.ergotech.vib.servers.SynchronizedClockTick
cvsRev - Static variable in class com.ergotech.vib.servers.TimeServer
cvsRev - Static variable in class com.ergotech.vib.utils.Utils
cvsRev - Static variable in class com.ergotech.vib.valueobjects.ArrayValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.BinaryValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.BooleanObjectValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.DateRangeValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.DoubleValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.GenericValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.HistoricalValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.LongValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.NumberObjectValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.PropertyValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.StringValueObject
cvsRev - Static variable in class com.ergotech.vib.valueobjects.ValueObject
cvsRev - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface

D

D - Variable in class com.ergotech.vib.manipulators.spc.PidControl
DATA_OFFSET - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The location of the DATA in a Modbus message.
DATA_REQUEST_MSG_LENGTH - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: The length of an outgoing data request message - 18
dataArray - Variable in class com.ergotech.secs.SecsFormat11: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat30: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat31: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat32: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat34: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat40: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat44: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat50: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat51: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat52: This is the array of data if we receive an array.
dataArray - Variable in class com.ergotech.secs.SecsFormat54: This is the array of data if we receive an array.
DATAID - Class in com.ergotech.secs
DATAID(String) - Constructor for class com.ergotech.secs.DATAID
DATAID(long) - Constructor for class com.ergotech.secs.DATAID
DATAID(byte) - Constructor for class com.ergotech.secs.DATAID
DATAID(short) - Constructor for class com.ergotech.secs.DATAID
DATAID(int) - Constructor for class com.ergotech.secs.DATAID
DATAID(SecsFormat) - Constructor for class com.ergotech.secs.DATAID
dataid - Variable in class com.ergotech.secs.gem.GemHandler: The dataid
dataIdSecsFormat - Variable in class com.ergotech.secs.gem.GemHostModel: The format and so the byte-length of the integer data ID.
DATALENGTH - Class in com.ergotech.secs
DATALENGTH(long) - Constructor for class com.ergotech.secs.DATALENGTH: Create a new message with an 8-Byte integer (SecsFormat30).
DATALENGTH(byte) - Constructor for class com.ergotech.secs.DATALENGTH: Create a new message with an 1-Byte integer (SecsFormat31).
DATALENGTH(short) - Constructor for class com.ergotech.secs.DATALENGTH: Create a new message with an 2-Byte integer (SecsFormat32).
DATALENGTH(int) - Constructor for class com.ergotech.secs.DATALENGTH: Create a new message with an 4-Byte integer (SecsFormat34).
DATALENGTH(SecsFormat) - Constructor for class com.ergotech.secs.DATALENGTH: Create a new message with the data contained in a SecsFormat object.
DataSource - Class in com.ergotech.vib.servers: Superclass of all components that are data sources.
DataSource() - Constructor for class com.ergotech.vib.servers.DataSource: Generic constructor.
DataSource(OutPortConnectionInterface) - Constructor for class com.ergotech.vib.servers.DataSource: Generic constructor.
DataSource.Writable - Class in com.ergotech.vib.servers: This class exposes the "addEventListener" method which is protected.
DataValve - Class in com.ergotech.vib.manipulators: This manipulator takes one input for data and one for data flow control.
DataValve() - Constructor for class com.ergotech.vib.manipulators.DataValve: The default constructor.
DateCreator - Class in com.ergotech.vib.manipulators.datetime: This will take integers from multiple servers (for year, month, day of the month, hour, minutes, and seconds, and when triggered, create new GenericValueObject with a timestamp generated from these values.
DateCreator() - Constructor for class com.ergotech.vib.manipulators.datetime.DateCreator: Generic Constructor.
DateInfo - Class in com.ergotech.vib.manipulators.datetime: This object will take a date (the Object or the reading date of the event) and send out only a portion of it (the year, month, day, hour, minute ect).
DateInfo() - Constructor for class com.ergotech.vib.manipulators.datetime.DateInfo: Generic Constructor.
DateRangeValueObject - Class in com.ergotech.vib.valueobjects
DateRangeValueObject() - Constructor for class com.ergotech.vib.valueobjects.DateRangeValueObject: REQUIRED zero arg constructor.
DateRangeValueObject(Date, Date) - Constructor for class com.ergotech.vib.valueobjects.DateRangeValueObject
DateToLong - Class in com.ergotech.vib.manipulators.datetime: This will take a Date input and convert it to a long
DateToLong() - Constructor for class com.ergotech.vib.manipulators.datetime.DateToLong: Generic Constructor.
dateToString(Date) - Static method in class com.ergotech.secs.SecsMsg: Returns the Date as a formatted string.
day - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
day(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the day of month.
deactivate() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Set the spooler variables and send the deactivated event report.
debugLevel - Static variable in class com.ergotech.secs.ECControllerHandler
debugLevel - Static variable in class com.ergotech.secs.ERVoyeurHandler
debugLevel - Static variable in class com.ergotech.secs.gem.EventOutSpooler: Our debug level.
debugLevel - Static variable in class com.ergotech.secs.gem.GemHandler: Positive value of debugLevel provide printouts with debugging information.
debugLevel - Static variable in class com.ergotech.secs.gem.GemSpoolHandler
debugLevel - Static variable in class com.ergotech.secs.SessionManager: Set to indicate the debug level.
debugLevel - Static variable in class com.ergotech.secs.TransactionManager: Our debug level.
debugLevel - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The debug level for this object.
debugLevel - Static variable in class com.ergotech.transsecs.secs.TransSecsVoyeur: Set this to enable debugging.
debugLevel - Static variable in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: The debug level.
debugLevel - Variable in class com.ergotech.vib.ports.PortDeviceServer: The specific debug level for this device server.
debugLevel - Static variable in class com.ergotech.vib.ports.PortFactory: The debug level for this device.
debugLevel - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: The debug level.
debugLevel - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: The debug level.
debugLevel - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: The debug level.
debugLevel - Static variable in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: The debug level.
debugLevel - Static variable in class com.ergotech.vib.servers.DataSource: The current debug level .
debugLevel - Variable in class com.ergotech.vib.servers.fins.FinsPLC: The specific debug level for this server.
debugLevel - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: The debug level for this device.
debugLevel - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The debug level.
DEC_REG - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as hex or decimal.
DecimalFormatter - Class in com.ergotech.vib.manipulators: This will use a formatter to convert a numeric value to a String.
DecimalFormatter() - Constructor for class com.ergotech.vib.manipulators.DecimalFormatter
DeclinedStateChangeException - Exception in com.ergotech.secs.gem
DeclinedStateChangeException() - Constructor for exception com.ergotech.secs.gem.DeclinedStateChangeException
DeclinedStateChangeException(String) - Constructor for exception com.ergotech.secs.gem.DeclinedStateChangeException
DECODE - Static variable in class com.ergotech.transsecs.secs.Base64: Specify decoding.
decode(byte[], int, int) - Static method in class com.ergotech.transsecs.secs.Base64: Very low-level access to decoding ASCII characters in the form of a byte array.
decode(String) - Static method in class com.ergotech.transsecs.secs.Base64: Decodes data from Base64 notation, automatically detecting gzip-compressed data and decompressing it.
decode(MqttSubscribeServer, String, MqttMessage) - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper.SecsFormat00PayloadDecoder: Decode the given string as a SecsFormat00 basic format is a "values" array { "values": [] } the valuesArray must be valid (but could be empty) otherwise an exception is thrown.
decode(MqttSubscribeServer, String, MqttMessage) - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper.TriggerPayloadDecoder: Check to see if the payload is JSON, if so decode it as DVID/DVVAL pairs.
decodeDVVALs(String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Decode the given string as a SecsFormat00 { "values":[{ dvid:WaferCount, dvval:15 }, { dvid:23456, dvval:\"Hello World\" }] }
decodeMessage(String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Decode the given string as a JSON Message format, eg.
decodeSecsFormat(JSONObject) - Static method in class com.ergotech.secs.JSONEncodeDecode
decodeSecsFormat00(String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Decode the given string as a SecsFormat00
decodeToObject(String) - Static method in class com.ergotech.transsecs.secs.Base64: Attempts to decode Base64 data and deserialize a Java Object within.
decrementTTL() - Method in class com.ergotech.vib.valueobjects.ValueObject: Decrements and returns the current value of the ttl field.
decrementTTL() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Decrements and returns the ttl field.
DEFAULT_INITIAL_STATE - Static variable in class com.ergotech.secs.gem.OnlineHandler: The default initial state.
DEFAULT_NAME - Static variable in class com.ergotech.vib.ports.PortDeviceServer: An arbitrary assigned name.
DEFAULT_TRANSSECS_APPLICATION - Static variable in class com.ergotech.transsecs.secs.TransSecsController: Application types.
defaultAddListenerForId(SecsEventListener, int) - Static method in class com.ergotech.secs.SecsEventHandler: This will register a SecsEventListeners to receive a specific event by id.
defaultBaudRate - Static variable in class com.ergotech.secs.SerialPortManager: The default baud rate.
defaultHandler - Static variable in class com.ergotech.secs.SecsEventHandler: This is the default handler used on this machine.
defaultID - Static variable in class com.ergotech.secs.DATAID: The default data id.
DEFAULTLEVEL - Static variable in class com.ergotech.secs.SecsEvent
defaultMessageHandler - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The default message handler to use.
defaultTTL - Static variable in class com.ergotech.vib.valueobjects.ValueObject: This is the default "time to live".
defineReport(RPTID, SecsFormat00) - Method in class com.ergotech.secs.Event: This will return true if the SecsFormat00 only contains VID's (the only value SecsFormat00)
defineReport(RPTID, VID[]) - Method in class com.ergotech.secs.Event
defineReport(S2F33) - Method in class com.ergotech.secs.Event: This is designed to take the format from a S2F33 message directly.
defineReport(SecsFormat3x5x, List<Long>) - Method in class com.ergotech.secs.gem.ECHandler: Define a report.
defineReport(SecsFormat3x5x, List<Long>) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Define a report.
defineVariableLimits(SecsFormat3x5x, SecsFormat3x5x, double, double) - Method in class com.ergotech.secs.gem.ECHandler: Define variable limits.
defineVariableLimits(SecsFormat3x5x, SecsFormat3x5x, double, double) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Define variable limits.
deleteDevice() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: This method indicates that this device is being removed and all servers associated with it should be cleaned up an removed.
deleteRow(int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Deletes the row.
deleteServer(SimpleDataSource) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Delete the provided server.
delimiter - Variable in class com.ergotech.vib.manipulators.array.ArrayToString: The delimiter (if blank, the elements will be contatenated).
descriptions - Static variable in class com.ergotech.vib.manipulators.MasterBooleanCalculator: Intelligent string for the defined constants.
descriptions - Static variable in class com.ergotech.vib.manipulators.MasterCalculator: Intelligent string for the defined constants.
descriptions - Static variable in class com.ergotech.vib.manipulators.MasterComparer: Intelligent string for the defined constants.
descriptions - Static variable in class com.ergotech.vib.manipulators.MasterMathConversions: Intelligent string for the defined constants.
deSelectSession() - Method in class com.ergotech.secs.HSMSSessionManager: Deselect the session.
deSpool() - Method in class com.ergotech.secs.gem.EventOutSpooler: Despool the event messages one at a time.
deSpool() - Method in class com.ergotech.secs.gem.EventSpooler: Despool the event messages one at a time and reset the primary message.
deSpool() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Send the data.
deSpool() - Method in class com.ergotech.secs.TransactionManager: Despool the event messages one at a time.
destroy() - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Clear all the variable and any persistent states.
destroy() - Method in class com.ergotech.secs.gem.GemHandler: Clear all the variables.
destroy() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Calls through to the TransSecsController method.
destroy() - Method in class com.ergotech.transsecs.secs.TransSecsController: Destroy the component and destroy all the messages.
destroy() - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: Destroy referenced devices
destroy() - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: Also destroy the output data source.
destroy() - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Also destroy the output data source.
destroy() - Method in class com.ergotech.vib.ports.PortDeviceServer: Indicate by means of a property change event that the device server is no more.
destroy() - Method in class com.ergotech.vib.servers.DataSource: Destroys the data source.
destroy() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Destroy all the servers.
destroy() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Destroy the server.
destroy() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Indicate by means of a property change event that the device server is no more.
destroy() - Method in class com.ergotech.vib.servers.plc.PLCServer: Stops the data source.
destroy() - Method in class com.ergotech.vib.servers.rest.RestWrapper: Destroy the server.
destroy() - Method in class com.ergotech.vib.servers.SimpleDataSource: Stops the data source.
determineSuspendedStatus() - Method in class com.ergotech.vib.servers.DataSource: Suspend Logic.
determineSuspendedStatus() - Method in class com.ergotech.vib.servers.SimpleDataSource: This method will actually set the suspended status with a call to super.determineSuspendedStatus() and then enable or disable the timebase depending upon the suspend status.
deviceIDValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the device value.
DeviceManagerManipulator - Class in com.ergotech.vib.servers: This is a device manager that allows creation of servers and some manipulators
DeviceManagerManipulator() - Constructor for class com.ergotech.vib.servers.DeviceManagerManipulator
DEVICES_CLIENT_TRANSSECS_APPLICATION - Static variable in class com.ergotech.transsecs.secs.TransSecsController: Application types.
deviceType() - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: The type of the address block.
DF1DataBlock - Class in com.ergotech.vib.servers.ab: This subclass adds the destination address to the data block.
DF1DataBlock(int, int, int, int, int, int, int, byte[]) - Constructor for class com.ergotech.vib.servers.ab.DF1DataBlock: Create the block with the data and the destination address.
DF1DataBlock(int, int, int, int, int, int, int, int) - Constructor for class com.ergotech.vib.servers.ab.DF1DataBlock: Create the block with the data and the destination address.
DF1DeviceServer - Class in com.ergotech.vib.servers.ab: This class provides the interface to the PLC.
DF1DeviceServer() - Constructor for class com.ergotech.vib.servers.ab.DF1DeviceServer: The default constructor.
df1DeviceServers - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: We maintain a list of all instances of DF1DeviceServers which can be readily accessed when creating a list for the editor.
DF1Server - Class in com.ergotech.vib.servers.ab: This is the abstract superclass of the DF1 protocol.
DF1Server() - Constructor for class com.ergotech.vib.servers.ab.DF1Server: Default constructor.
DINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
DINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
DirtyVector<S extends PLCServer> - Class in com.ergotech.vib.servers.plc: This subclass of a vector keeps track of whether it is "dirty" it is dirty if either "addElement" or "removeElement" have been called since the last "clone".
DirtyVector() - Constructor for class com.ergotech.vib.servers.plc.DirtyVector
disableCEID(CEID) - Method in class com.ergotech.secs.Event
DISABLED - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant DISABLED.
DISABLED_MESSAGE_BLOCKED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is disabled and a message that isn't allowed is attempted to be sent.
disconnect() - Method in class com.ergotech.secs.HSMSActiveWrapper: Disconnect the connection.
disconnect() - Method in class com.ergotech.secs.HSMSPassiveWrapper: Disconnect the connection.
disconnect() - Method in class com.ergotech.secs.HSMSWrapper: Disconnect the connection.
disconnect() - Method in class com.ergotech.secs.SecsIWrapper: Disconnect the connection.
disconnect() - Method in interface com.ergotech.secs.WrapperInterface: Disconnected the session.
disconnect() - Method in class com.ergotech.transsecs.secs.TransSecsController: Disconnects from all wrappers (active if present and passive).
disconnect() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Disconnects from all wrappers (active if present and passive).
disconnect() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer: Close the socket.
disconnectActive() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Disconnect the active wrapper and generally clean up.
disconnectPassive() - Method in class com.ergotech.transsecs.secs.TransSecsController: Disconnect the passiveWrapper and generally clean up.
DISCRETE - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
displayBytes(byte[]) - Method in class com.ergotech.secs.Logger: Displays the provided data as hex values.
displayBytes(byte[]) - Method in class com.ergotech.secs.NetLogger
displayBytes(byte[]) - Method in class com.ergotech.secs.SyslogLogger
displayTimedPopup(String, String) - Static method in class com.ergotech.transsecs.secs.PublishBean: Show a JOption Pane for 15 seconds.
DISPLAYVALUE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will be called by active controls to ask a server for their in current value.
Divide - Class in com.ergotech.vib.manipulators: Calculates the division of two numbers.
Divide() - Constructor for class com.ergotech.vib.manipulators.Divide: Constructor.
divisorValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Divide: This is the input method for the value that is the divisor.
DLE - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: DLE - 0x06
DM_AREA_SIZE - Static variable in class com.ergotech.vib.servers.fins.FinsPLC: The dm area size (CJ1 controller).
DONT_BREAK_LINES - Static variable in class com.ergotech.transsecs.secs.Base64: Don't break lines when encoding (violates strict Base64 specification)
dontConnect - Static variable in class com.ergotech.vib.servers.DataSource: A variable that indicates we are not going to make properties to the real server.
DOUBLE_WORD_VALUE - Static variable in class com.ergotech.vib.servers.plc.PLCServer: The value type DOUBLE WORD
DOUBLETYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
DoubleValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
DoubleValueObject() - Constructor for class com.ergotech.vib.valueobjects.DoubleValueObject: The default constructor.
DoubleValueObject(double, Color) - Constructor for class com.ergotech.vib.valueobjects.DoubleValueObject: Creates a value object with the current double value.
DoubleValueObject(double) - Constructor for class com.ergotech.vib.valueobjects.DoubleValueObject: Creates a value object with the current integer value.
DoubleValueObject(float, Color) - Constructor for class com.ergotech.vib.valueobjects.DoubleValueObject: Creates a value object with the current integer value.
DoubleValueObject(float) - Constructor for class com.ergotech.vib.valueobjects.DoubleValueObject: Creates a value object with the current integer value.
doubleYColumns - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: if set to a non-zero value, this number of double value columns will be generated.
DRACK - Class in com.ergotech.secs: Define Report Acknowledge code.
DRACK(byte) - Constructor for class com.ergotech.secs.DRACK: Create a new message from a byte data type.
DRACK(SecsFormat) - Constructor for class com.ergotech.secs.DRACK: Create a new message from a SecsFormat data type.
DSID - Class in com.ergotech.secs
DSID(String) - Constructor for class com.ergotech.secs.DSID: Create a new message with ASCII (format 20) data.
DSID(long) - Constructor for class com.ergotech.secs.DSID: Create a new message with an 8-Byte integer (SecsFormat30).
DSID(byte) - Constructor for class com.ergotech.secs.DSID: Create a new message with an 1-Byte integer (SecsFormat31).
DSID(short) - Constructor for class com.ergotech.secs.DSID: Create a new message with an 2-Byte integer (SecsFormat32).
DSID(int) - Constructor for class com.ergotech.secs.DSID: Create a new message with an 4-Byte integer (SecsFormat34).
DSID(SecsFormat) - Constructor for class com.ergotech.secs.DSID: Create a new message with the data contained in a SecsFormat object.
DSPER - Class in com.ergotech.secs: Data Sample Period, 6 Bytes Max (HHMMSS).
DSPER(String) - Constructor for class com.ergotech.secs.DSPER: Create a new message with ASCII (format 20) data.
DSPER(SecsFormat) - Constructor for class com.ergotech.secs.DSPER: Create a new message with data contained in a SecsFormat object.
DUPLICATE_MESSAGE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a duplicate message is received.
dvids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of all the ECIDs.
DVNAME - Class in com.ergotech.secs
DVNAME(String) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with ASCII (format 20) data.
DVNAME(long) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with an 8-Byte integer (SecsFormat30).
DVNAME(byte) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with an 1-Byte integer (SecsFormat31).
DVNAME(short) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with an 2-Byte integer (SecsFormat32).
DVNAME(int) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with an 4-Byte integer (SecsFormat34).
DVNAME(SecsFormat) - Constructor for class com.ergotech.secs.DVNAME: Create a new message with the data contained in a SecsFormat object.
DVNAME - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a DVNAME.
DVNAME - Static variable in class TransSECS.GemIDConnection: Used to identify a DVNAME.
DVVAL - Class in com.ergotech.secs: Data value.
DVVAL(SecsFormat[]) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with LIST (format 00) data.
DVVAL(SecsFormat) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with the data contained in a SecsFormat object.
DVVAL(String) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with ASCII (format 20) data.
DVVAL(boolean) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with Boolean (SecsFormat11) data.
DVVAL(float) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 4-Byte floating point number (SecsFormat44).
DVVAL(double) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 8-Byte floating point number (SecsFormat40).
DVVAL(long) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 8-Byte integer (SecsFormat30).
DVVAL(byte) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 1-Byte integer (SecsFormat31).
DVVAL(short) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 2-Byte integer (SecsFormat32).
DVVAL(int) - Constructor for class com.ergotech.secs.DVVAL: Create a new message with an 4-Byte integer (SecsFormat34).
DVVAL_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an DVVAL's value has changed.

E

EAC - Class in com.ergotech.secs: Equipment Acknowledge code.
EAC(byte) - Constructor for class com.ergotech.secs.EAC: Create the object from a byte data type.
EAC(SecsFormat) - Constructor for class com.ergotech.secs.EAC: Create the object from a SecsFormat data type.
ECControllerHandler - Class in com.ergotech.secs
ECDEF - Class in com.ergotech.secs: Equipment Constant Default Value.
ECDEF(String) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with ASCII (format 20) data.
ECDEF(boolean) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with Boolean (SecsFormat11) data.
ECDEF(float) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 4-Byte floating point number (SecsFormat44).
ECDEF(double) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 8-Byte floating point number (SecsFormat40).
ECDEF(long) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 8-Byte integer (SecsFormat30).
ECDEF(byte) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 1-Byte integer (SecsFormat31).
ECDEF(short) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 2-Byte integer (SecsFormat32).
ECDEF(int) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with an 4-Byte integer (SecsFormat34).
ECDEF(SecsFormat) - Constructor for class com.ergotech.secs.ECDEF: Create a new message with the data contained in a SecsFormat object.
ECHandler - Class in com.ergotech.secs.gem: This is an implementation of the EquipmentControl.
ECID - Class in com.ergotech.secs: Equipment Constant ID.
ECID(byte[]) - Constructor for class com.ergotech.secs.ECID: Construct a SecsFormat10 from the byte array passed.
ECID(String) - Constructor for class com.ergotech.secs.ECID: Create a new message with ASCII (format 20) data.
ECID(long) - Constructor for class com.ergotech.secs.ECID: Create a new message with an 8-Byte integer (SecsFormat30).
ECID(byte) - Constructor for class com.ergotech.secs.ECID: Create a new message with an 1-Byte integer (SecsFormat31).
ECID(short) - Constructor for class com.ergotech.secs.ECID: Create a new message with an 2-Byte integer (SecsFormat32).
ECID(int) - Constructor for class com.ergotech.secs.ECID: Create a new message with an 4-Byte integer (SecsFormat34).
ECID(SecsFormat) - Constructor for class com.ergotech.secs.ECID: Create a new message with the data contained in a SecsFormat object.
ECID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify an ECID.
ECID - Static variable in class TransSECS.GemIDConnection: Used to identify an ECID.
ECID_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an ECID value has changed.
ecids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of all the ECIDs.
ECIDValidationInterface - Interface in com.ergotech.secs.gem
ECMAX - Class in com.ergotech.secs: Equipment Constant Maximum Value.
ECMAX(String) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with ASCII (format 20) data.
ECMAX(boolean) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with Boolean (SecsFormat11) data.
ECMAX(float) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 4-Byte floating point number (SecsFormat44).
ECMAX(double) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 8-Byte floating point number (SecsFormat40).
ECMAX(long) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 8-Byte integer (SecsFormat30).
ECMAX(byte) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 1-Byte integer (SecsFormat31).
ECMAX(short) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 2-Byte integer (SecsFormat32).
ECMAX(int) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with an 4-Byte integer (SecsFormat34).
ECMAX(SecsFormat) - Constructor for class com.ergotech.secs.ECMAX: Create a new message with the data contained in a SecsFormat object.
ECMIN - Class in com.ergotech.secs: Equipment Constant Minimum Value.
ECMIN(String) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with ASCII (format 20) data.
ECMIN(boolean) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with Boolean (SecsFormat11) data.
ECMIN(float) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 4-Byte floating point number (SecsFormat44).
ECMIN(double) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 8-Byte floating point number (SecsFormat40).
ECMIN(long) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 8-Byte integer (SecsFormat30).
ECMIN(byte) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 1-Byte integer (SecsFormat31).
ECMIN(short) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 2-Byte integer (SecsFormat32).
ECMIN(int) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with an 4-Byte integer (SecsFormat34).
ECMIN(SecsFormat) - Constructor for class com.ergotech.secs.ECMIN: Create a new message with the data contained in a SecsFormat object.
ECNAME - Class in com.ergotech.secs: Equipment Constant Name .
ECNAME(String) - Constructor for class com.ergotech.secs.ECNAME: Create a new message with ASCII (format 20) data.
ECNAME(SecsFormat) - Constructor for class com.ergotech.secs.ECNAME: Create a new message with data contained in a SecsFormat object.
ECV - Class in com.ergotech.secs: Equipment Constant Value.
ECV(String) - Constructor for class com.ergotech.secs.ECV: Create a new message with ASCII (format 20) data.
ECV(boolean) - Constructor for class com.ergotech.secs.ECV: Create a new message with Boolean (SecsFormat11) data.
ECV(float) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 4-Byte floating point number (SecsFormat44).
ECV(double) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 8-Byte floating point number (SecsFormat40).
ECV(long) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 8-Byte integer (SecsFormat30).
ECV(byte) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 1-Byte integer (SecsFormat31).
ECV(short) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 2-Byte integer (SecsFormat32).
ECV(int) - Constructor for class com.ergotech.secs.ECV: Create a new message with an 4-Byte integer (SecsFormat34).
ECV(SecsFormat) - Constructor for class com.ergotech.secs.ECV: Create a new message with the data contained in a SecsFormat object.
ECVoyeurHandler - Class in com.ergotech.secs
ECVoyeurHandler(int) - Constructor for class com.ergotech.secs.ECVoyeurHandler
EDID - Class in com.ergotech.secs: Expected data Identification.
EDID(byte[]) - Constructor for class com.ergotech.secs.EDID: Create a new message from an array of bytes.
EDID(String) - Constructor for class com.ergotech.secs.EDID: Create a new message with ASCII (format 20) data.
EDID(long) - Constructor for class com.ergotech.secs.EDID: Create a new message with an 8-Byte integer (SecsFormat30).
EDID(byte) - Constructor for class com.ergotech.secs.EDID: Create a new message with an 1-Byte integer (SecsFormat31).
EDID(short) - Constructor for class com.ergotech.secs.EDID: Create a new message with an 2-Byte integer (SecsFormat32).
EDID(int) - Constructor for class com.ergotech.secs.EDID: Create a new message with an 4-Byte integer (SecsFormat34).
EDID(SecsFormat) - Constructor for class com.ergotech.secs.EDID: Create a new message with the data contained in a SecsFormat object.
EIPPort(String) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer.EIPPort
EIPPortFactory(String) - Constructor for class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer.EIPPortFactory
ELEMENT_SEPARATOR - Static variable in class com.ergotech.vib.servers.plc.PLCArray
ELEMENT_SEPARATOR - Static variable in class com.ergotech.vib.servers.ppi.S7Array
elementAt(int) - Method in class com.ergotech.secs.SecsFormat00: Provides backwards compatibility.
elementAt(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Returns the element at the given location in the array.
elements - Variable in class com.ergotech.vib.servers.ArrayDataSource: the number of elements
Emailer - Class in com.ergotech.vib.manipulators: This will send an email whenever it receives a value.
Emailer() - Constructor for class com.ergotech.vib.manipulators.Emailer: Generic constructor.
enable_disableCEID(S2F37) - Method in class com.ergotech.secs.Event
enableAlarm(SecsFormat3x5x, boolean) - Method in class com.ergotech.secs.gem.ECHandler: Register default parameters for limits monitoring for a particular VID.
enableAlarm(SecsFormat3x5x, boolean) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: This method allows the equipment to control enabling and disabling alarms.
enableAlarm(int, boolean) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
enableAllEvents - Variable in class com.ergotech.secs.gem.GemHostModel: Set to true to force the application to enable all events.
enableCEID(CEID) - Method in class com.ergotech.secs.Event
enabled - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable: True if the alarm has been "enabled".
ENABLED_PORT_NAME - Static variable in class com.ergotech.secs.gem.GemALID: This is the name that we publish use to publish the enabled flag.
ENABLED_PORT_NAME - Static variable in class com.ergotech.secs.gem.GemCEID: This is the name that we publish use to publish the enabled flag.
enableEvent(int, boolean) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
enableReport(SecsFormat3x5x, boolean) - Method in class com.ergotech.secs.gem.ECHandler: Enable or disable a event reporting.
enableReport(SecsFormat3x5x, boolean) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Enable or disable a event reporting.
ENCODE - Static variable in class com.ergotech.transsecs.secs.Base64: Specify encoding.
encodeBytes(byte[]) - Static method in class com.ergotech.transsecs.secs.Base64: Encodes a byte array into Base64 notation.
encodeBytes(byte[], int) - Static method in class com.ergotech.transsecs.secs.Base64: Encodes a byte array into Base64 notation.
encodeBytes(byte[], int, int) - Static method in class com.ergotech.transsecs.secs.Base64: Encodes a byte array into Base64 notation.
encodeBytes(byte[], int, int, int) - Static method in class com.ergotech.transsecs.secs.Base64: Encodes a byte array into Base64 notation.
encodeObject(Serializable) - Static method in class com.ergotech.transsecs.secs.Base64: Serializes an object and returns the Base64-encoded version of that serialized object.
encodeObject(Serializable, int) - Static method in class com.ergotech.transsecs.secs.Base64: Serializes an object and returns the Base64-encoded version of that serialized object.
encoding - Variable in class com.ergotech.secs.SecsFormat22: This is the encoding used by this format.
encodingCode - Variable in class com.ergotech.secs.SecsFormat22: The encoding code.
END - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Header for an SC PDU.
endSession() - Method in class com.ergotech.secs.HSMSSessionManager: End the session.
endSession() - Method in class com.ergotech.secs.SessionManager: End the session.
ENQ - Static variable in class com.ergotech.secs.SecsIConnectionManager
ENQ - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: ENQ - 0x05
ENQ - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: ENQ - 0x05
EOT - Static variable in class com.ergotech.secs.SecsIConnectionManager
EOT - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: EOT - 0x04
EQUAL - Variable in class com.ergotech.secs.gem.Monitor: Constant for EQUAL (6).
Equal - Class in com.ergotech.vib.manipulators: Compares the two inputs as equal.
Equal() - Constructor for class com.ergotech.vib.manipulators.Equal: Generic Constructor.
equals(ACKA) - Method in class com.ergotech.secs.ACKA: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ACKA: Performs a comparision of the string value this object to the String passed.
equals(AGENT) - Method in class com.ergotech.secs.AGENT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.AGENT: Performs a comparision of the string value this object to the String passed.
equals(ALID) - Method in class com.ergotech.secs.ALID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ALID: Performs a comparision of the string value this object to the String passed.
equals(AREYOUTHERE) - Method in class com.ergotech.secs.AREYOUTHERE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.AREYOUTHERE: Performs a comparision of the string value this object to the String passed.
equals(ATTRDATA) - Method in class com.ergotech.secs.ATTRDATA: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ATTRDATA: Performs a comparision of the string value this object to the String passed.
equals(CARRIERID) - Method in class com.ergotech.secs.CARRIERID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CARRIERID: Performs a comparision of the string value this object to the String passed.
equals(CEID) - Method in class com.ergotech.secs.CEID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CEID: Performs a comparision of the string value this object to the String passed.
equals(CEPVAL) - Method in class com.ergotech.secs.CEPVAL: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CEPVAL: Performs a comparision of the string value this object to the String passed.
equals(CPVAL) - Method in class com.ergotech.secs.CPVAL: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CPVAL: Performs a comparision of the string value this object to the String passed.
equals(CSAACK) - Method in class com.ergotech.secs.CSAACK: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.CSAACK: Performs a comparision of the incoming string and the string representation of this object.
equals(CTLJOBCMD) - Method in class com.ergotech.secs.CTLJOBCMD: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CTLJOBCMD: Performs a comparision of the string value this object to the String passed.
equals(CTLJOBID) - Method in class com.ergotech.secs.CTLJOBID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.CTLJOBID: Performs a comparision of the string value this object to the String passed.
equals(DVVAL) - Method in class com.ergotech.secs.DVVAL: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.DVVAL: Performs a comparision of the string value this object to the String passed.
equals(ECDEF) - Method in class com.ergotech.secs.ECDEF: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ECDEF: Performs a comparision of the string value this object to the String passed.
equals(ECID) - Method in class com.ergotech.secs.ECID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ECID: Performs a comparision of the string value this object to the String passed.
equals(ECMAX) - Method in class com.ergotech.secs.ECMAX: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ECMAX: Performs a comparision of the string value this object to the String passed.
equals(ECMIN) - Method in class com.ergotech.secs.ECMIN: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ECMIN: Performs a comparision of the string value this object to the String passed.
equals(ECV) - Method in class com.ergotech.secs.ECV: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ECV: Performs a comparision of the string value this object to the String passed.
equals(EDID) - Method in class com.ergotech.secs.EDID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.EDID: Performs a comparision of the string value this object to the String passed.
equals(ERRCODE) - Method in class com.ergotech.secs.ERRCODE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.ERRCODE: Performs a comparision of the string value this object to the String passed.
equals(FCNID) - Method in class com.ergotech.secs.FCNID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.FCNID: Performs a comparision of the string value this object to the String passed.
equals(Object) - Method in class com.ergotech.secs.gem.SecsFormatValueObject
equals(GRANT) - Method in class com.ergotech.secs.GRANT: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.GRANT: Performs a comparision of the incoming string and the string representation of this object.
equals(GRANT) - Method in class com.ergotech.secs.GRANT6: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.GRANT6: Performs a comparision of the incoming string and the string representation of this object.
equals(HINTEG) - Method in class com.ergotech.secs.HINTEG: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.HINTEG: Performs a comparision of the string value this object to the String passed.
equals(LENGTH) - Method in class com.ergotech.secs.LENGTH: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.LENGTH: Performs a comparision of the incoming string and the string representation of this object.
equals(LIMITID) - Method in class com.ergotech.secs.LIMITID: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.LIMITID: Performs a comparision of the incoming string and the string representation of this object.
equals(LIMITMAX) - Method in class com.ergotech.secs.LIMITMAX: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.LIMITMAX: Performs a comparision of the string value this object to the String passed.
equals(LIMITMIN) - Method in class com.ergotech.secs.LIMITMIN: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.LIMITMIN: Performs a comparision of the string value this object to the String passed.
equals(LINKID) - Method in class com.ergotech.secs.LINKID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.LINKID: Performs a comparision of the string value this object to the String passed.
equals(LOWERDB) - Method in class com.ergotech.secs.LOWERDB: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.LOWERDB: Performs a comparision of the string value this object to the String passed.
EQUALS - Static variable in class com.ergotech.secs.MessageVerifierOneItem
equals(MF) - Method in class com.ergotech.secs.MF: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.MF: Performs a comparision of the string value this object to the String passed.
equals(OBJSPEC) - Method in class com.ergotech.secs.OBJSPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.OBJSPEC: Performs a comparision of the string value this object to the String passed.
equals(OBJTOKEN) - Method in class com.ergotech.secs.OBJTOKEN: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.OBJTOKEN: Performs a comparision of the string value this object to the String passed.
equals(OPID) - Method in class com.ergotech.secs.OPID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.OPID: Performs a comparision of the string value this object to the String passed.
equals(PODEVENT) - Method in class com.ergotech.secs.PODEVENT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PODEVENT: Performs a comparision of the string value this object to the String passed.
equals(PPBODY) - Method in class com.ergotech.secs.PPBODY: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.PPBODY: Performs a comparision of the incoming string and the string representation of this object.
equals(PPGNT) - Method in class com.ergotech.secs.PPGNT: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.PPGNT: Performs a comparision of the incoming string and the string representation of this object.
equals(PPID) - Method in class com.ergotech.secs.PPID: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.PPID: Performs a comparision of the incoming string and the string representation of this object.
equals(PRCMDNAME) - Method in class com.ergotech.secs.PRCMDNAME: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRCMDNAME: Performs a comparision of the string value this object to the String passed.
equals(PREVENTID) - Method in class com.ergotech.secs.PREVENTID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PREVENTID: Performs a comparision of the string value this object to the String passed.
equals(PRJOBID) - Method in class com.ergotech.secs.PRJOBID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRJOBID: Performs a comparision of the string value this object to the String passed.
equals(PRJOBMILESTONE) - Method in class com.ergotech.secs.PRJOBMILESTONE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRJOBMILESTONE: Performs a comparision of the string value this object to the String passed.
equals(PRJOBSPACE) - Method in class com.ergotech.secs.PRJOBSPACE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRJOBSPACE: Performs a comparision of the string value this object to the String passed.
equals(PRMTRLORDER) - Method in class com.ergotech.secs.PRMTRLORDER: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRMTRLORDER: Performs a comparision of the string value this object to the String passed.
equals(PRPAUSEEVENT) - Method in class com.ergotech.secs.PRPAUSEEVENT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRPAUSEEVENT: Performs a comparision of the string value this object to the String passed.
equals(PRPROCESSSTART) - Method in class com.ergotech.secs.PRPROCESSSTART: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRPROCESSSTART: Performs a comparision of the string value this object to the String passed.
equals(PRRECIPEMETHOD) - Method in class com.ergotech.secs.PRRECIPEMETHOD: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRRECIPEMETHOD: Performs a comparision of the string value this object to the String passed.
equals(PRSTATE) - Method in class com.ergotech.secs.PRSTATE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.PRSTATE: Performs a comparision of the string value this object to the String passed.
equals(RCPATTRDATA) - Method in class com.ergotech.secs.RCPATTRDATA: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPATTRDATA: Performs a comparision of the string value this object to the String passed.
equals(RCPATTRID) - Method in class com.ergotech.secs.RCPATTRID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPATTRID: Performs a comparision of the string value this object to the String passed.
equals(RCPBODY) - Method in class com.ergotech.secs.RCPBODY: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPBODY: Performs a comparision of the string value this object to the String passed.
equals(RCPCLASS) - Method in class com.ergotech.secs.RCPCLASS: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPCLASS: Performs a comparision of the string value this object to the String passed.
equals(RCPDESCNM) - Method in class com.ergotech.secs.RCPDESCNM: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPDESCNM: Performs a comparision of the string value this object to the String passed.
equals(RCPDESCTIME) - Method in class com.ergotech.secs.RCPDESCTIME: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPDESCTIME: Performs a comparision of the string value this object to the String passed.
equals(RCPID) - Method in class com.ergotech.secs.RCPID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPID: Performs a comparision of the string value this object to the String passed.
equals(RCPNAME) - Method in class com.ergotech.secs.RCPNAME: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPNAME: Performs a comparision of the string value this object to the String passed.
equals(RCPNEWID) - Method in class com.ergotech.secs.RCPNEWID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPNEWID: Performs a comparision of the string value this object to the String passed.
equals(RCPPARNM) - Method in class com.ergotech.secs.RCPPARNM: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPPARNM: Performs a comparision of the string value this object to the String passed.
equals(RCPPARRULE) - Method in class com.ergotech.secs.RCPPARRULE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPPARRULE: Performs a comparision of the string value this object to the String passed.
equals(RCPPARVAL) - Method in class com.ergotech.secs.RCPPARVAL: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPPARVAL: Performs a comparision of the string value this object to the String passed.
equals(RCPSECNM) - Method in class com.ergotech.secs.RCPSECNM: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPSECNM: Performs a comparision of the string value this object to the String passed.
equals(RCPVERS) - Method in class com.ergotech.secs.RCPVERS: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RCPVERS: Performs a comparision of the string value this object to the String passed.
equals(REPGSZ) - Method in class com.ergotech.secs.REPGSZ: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.REPGSZ: Performs a comparision of the string value this object to the String passed.
equals(RESETENA) - Method in class com.ergotech.secs.RESETENA: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RESETENA: Performs a comparision of the string value this object to the String passed.
equals(RESPEC) - Method in class com.ergotech.secs.RESPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RESPEC: Performs a comparision of the string value this object to the String passed.
equals(RMCHGSTAT) - Method in class com.ergotech.secs.RMCHGSTAT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMCHGSTAT: Performs a comparision of the string value this object to the String passed.
equals(RMDATASIZE) - Method in class com.ergotech.secs.RMDATASIZE: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMDATASIZE: Performs a comparision of the string value this object to the String passed.
equals(RMGRNT) - Method in class com.ergotech.secs.RMGRNT: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.RMGRNT: Performs a comparision of the incoming string and the string representation of this object.
equals(RMNEWNS) - Method in class com.ergotech.secs.RMNEWNS: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMNEWNS: Performs a comparision of the string value this object to the String passed.
equals(RMNSCMD) - Method in class com.ergotech.secs.RMNSCMD: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMNSCMD: Performs a comparision of the string value this object to the String passed.
equals(RMNSSPEC) - Method in class com.ergotech.secs.RMNSSPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMNSSPEC: Performs a comparision of the string value this object to the String passed.
equals(RMRECSPEC) - Method in class com.ergotech.secs.RMRECSPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMRECSPEC: Performs a comparision of the string value this object to the String passed.
equals(RMSEGSPEC) - Method in class com.ergotech.secs.RMSEGSPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.RMSEGSPEC: Performs a comparision of the string value this object to the String passed.
equals(SARM) - Method in class com.ergotech.secs.SARM: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SARM: Performs a comparision of the string value this object to the String passed.
equals(Object) - Method in class com.ergotech.secs.SecsDataStructure: Performs a comparision of this object to an object of the same type.
equals(Object) - Method in class com.ergotech.secs.SecsFormat10: This method will compare the arrays of two SecsFormat10 objects.
equals(Object) - Method in class com.ergotech.secs.SecsFormat11
equals(Object) - Method in class com.ergotech.secs.SecsFormat20
equals(Object) - Method in class com.ergotech.secs.SecsFormat22
equals(Object) - Method in class com.ergotech.secs.SecsFormat30: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat31: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat32: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat34: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat40: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat44: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat50: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat51: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat52: Checks for equality of the values.
equals(Object) - Method in class com.ergotech.secs.SecsFormat54: Checks for equality of the values.
equals(SFCD) - Method in class com.ergotech.secs.SFCD: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.SFCD: Performs a comparision of the incoming string and the string representation of this object.
equals(SLOTID) - Method in class com.ergotech.secs.SLOTID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SLOTID: Performs a comparision of the string value this object to the String passed.
equals(SPAACK) - Method in class com.ergotech.secs.SPAACK: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.SPAACK: Performs a comparision of the incoming string and the string representation of this object.
equals(SPD) - Method in class com.ergotech.secs.SPD: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.SPD: Performs a comparision of the incoming string and the string representation of this object.
equals(SPID) - Method in class com.ergotech.secs.SPID: Performs a comparision of this object to an object of the same type.
equals(String) - Method in class com.ergotech.secs.SPID: Performs a comparision of the incoming string and the string representation of this object.
equals(SPR) - Method in class com.ergotech.secs.SPR: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SPR: Performs a comparision of the incoming string and the string representation of this object.
equals(STRID) - Method in class com.ergotech.secs.STRID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.STRID: Performs a comparision of the string value this object to the String passed.
equals(SV) - Method in class com.ergotech.secs.SV: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SV: Performs a comparision of the string value this object to the String passed.
equals(SVID) - Method in class com.ergotech.secs.SVID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SVID: Performs a comparision of the string value this object to the String passed.
equals(SVNAME) - Method in class com.ergotech.secs.SVNAME: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.SVNAME: Performs a comparision of the string value this object to the String passed.
equals(TAGSER) - Method in class com.ergotech.secs.TAGSER: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TAGSER: Performs a comparision of the string value this object to the String passed.
equals(TAGSN) - Method in class com.ergotech.secs.TAGSN: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TAGSN: Performs a comparision of the string value this object to the String passed.
equals(TARGETSPEC) - Method in class com.ergotech.secs.TARGETSPEC: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TARGETSPEC: Performs a comparision of the string value this object to the String passed.
equals(TEXT) - Method in class com.ergotech.secs.TEXT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TEXT: Performs a comparision of the string value this object to the String passed.
equals(TIMEFORMAT) - Method in class com.ergotech.secs.TIMEFORMAT: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TIMEFORMAT: Performs a comparision of the string value this object to the String passed.
equals(TIMESTAMP) - Method in class com.ergotech.secs.TIMESTAMP: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TIMESTAMP: Performs a comparision of the string value this object to the String passed.
equals(TOTSMP) - Method in class com.ergotech.secs.TOTSMP: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TOTSMP: Performs a comparision of the string value this object to the String passed.
equals(TRID) - Method in class com.ergotech.secs.TRID: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.TRID: Performs a comparision of the string value this object to the String passed.
equals(UPPERDB) - Method in class com.ergotech.secs.UPPERDB: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.UPPERDB: Performs a comparision of the string value this object to the String passed.
equals(V) - Method in class com.ergotech.secs.V: Performs a comparision of the string value this object to the string value the passed object.
equals(String) - Method in class com.ergotech.secs.V: Performs a comparision of the string value this object to the String passed.
equals(Object) - Method in class com.ergotech.transsecs.secs.SecsFormat99
equals(Object) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Equals includes the name of the bean and the name of the controller.
equals(Object) - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns true if the object passed equals this object.
equals(Object) - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Check for equality.
equals(Object) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Check for equality.
equals(Object) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This method is in every subclass of Object.
equals(Object) - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: This will return true if theObject is an instance of ValueObject and its double value is the same as ours.
equals(Object) - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject
equals(Object) - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: This will return true if theObject is an instance of ValueObject and it's double value is the same as ours.
equals(Object) - Method in class com.ergotech.vib.valueobjects.DoubleValueObject
equals(Object) - Method in class com.ergotech.vib.valueobjects.GenericValueObject
equals(Object) - Method in class com.ergotech.vib.valueobjects.LongValueObject: This will return true if theObject is an instance of ValueObject and it's double value is the same as ours.
equals(Object) - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject
equals(Object) - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: This will return true if theObject is an instance of ValueObject and it's double value is the same as ours.
equals(Object) - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns whether or not the String values are equivalent.
equals(Object) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject
equals(Object) - Method in class com.ergotech.vib.valueobjects.ValueObject: Compare the string values
equals(Object) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This method is in every subclass of Object.
EQUIPMENT_INITIATED_CONNECT - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant EQUIPMENT_INITIATED_CONNECT.
EQUIPMENT_INITIATED_CONNECT_WAIT_CRA - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant EQUIPMENT_INITIATED_CONNECT_WAIT_CRA.
EQUIPMENT_INITIATED_CONNECT_WAIT_DELAY - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant EQUIPMENT_INITIATED_CONNECT_WAIT_DELAY.
EQUIPMENT_OFFLINE - Static variable in class com.ergotech.secs.gem.OnlineHandler: EQUIPMENT_OFFLINE value is 1 matching E5 definition.
EquipmentControlInterface - Interface in com.ergotech.secs.gem: This allows control over the configuration of the equipment that by the gem standards would normally be set by the host.
equipmentHostNameValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the equipmentHostName value.
equipmentName - Variable in class com.ergotech.secs.gem.SendEvent: The equipment name of the GEM interface associated with this instance.
equipmentPortValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the equipmentPort value.
ERACK - Class in com.ergotech.secs: Enable/Disable Event Report Acknowledge Code.
ERACK(byte) - Constructor for class com.ergotech.secs.ERACK: Create a new message from a byte data type.
ERACK(SecsFormat) - Constructor for class com.ergotech.secs.ERACK: Create a new message from a SecsFormat data type.
ERControllerHandler - Class in com.ergotech.secs
ERControllerHandler() - Constructor for class com.ergotech.secs.ERControllerHandler: empty constructor
ERRCODE - Class in com.ergotech.secs: ERRCODE.
ERRCODE(long) - Constructor for class com.ergotech.secs.ERRCODE: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
ERRCODE(byte) - Constructor for class com.ergotech.secs.ERRCODE: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
ERRCODE(short) - Constructor for class com.ergotech.secs.ERRCODE: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
ERRCODE(int) - Constructor for class com.ergotech.secs.ERRCODE: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
ERRCODE(SecsFormat) - Constructor for class com.ergotech.secs.ERRCODE: Create a new message with the data contained in a SecsFormat object.
errcode - Variable in class com.ergotech.secs.ERRPAIR
ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when an error that is not otherwise described.
error(String, Throwable) - Method in class com.ergotech.transsecs.secs.Log4JLogger: write an error with stack trace and message to the log
error - Variable in class com.ergotech.vib.manipulators.spc.PidControl
ERROR_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.LocalMessageReference: This datasource will be triggered if an error response is recieved to a message.
ERROR_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: This datasource will be triggered if an error response is recieved to a message.
errorCount - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The error count for the block.
errorStatusReceived(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Called after sending the message when the result of sending, up to and including seeing a response, is known.
ERRPAIR - Class in com.ergotech.secs: ERRPPAIR Used in Stream 16 consists of data elements RCPPARNM RCPPARVAL
ERRPAIR() - Constructor for class com.ergotech.secs.ERRPAIR
ERRPAIR(ERRCODE, ERRTEXT) - Constructor for class com.ergotech.secs.ERRPAIR
ERRPAIR(SecsFormat00) - Constructor for class com.ergotech.secs.ERRPAIR
errtext - Variable in class com.ergotech.secs.ERRPAIR
ERRTEXT - Class in com.ergotech.secs: ERRTEXT.
ERRTEXT(String) - Constructor for class com.ergotech.secs.ERRTEXT: Create a new message with ASCII (format 20) data.
ERRTEXT(SecsFormat) - Constructor for class com.ergotech.secs.ERRTEXT: Create a new message from a SecsFormat data type.
ERVoyeurHandler - Class in com.ergotech.secs: This is the handlers for the Voyeur connection itself.
escapeJSON(String) - Static method in class com.ergotech.vib.valueobjects.ValueObject
ETX - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: ETX - 0x03
evaluate(String) - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Check the string against the RE and return as much of the string as matches.
Event - Class in com.ergotech.secs: This object will store all the CEID's and what reports have been registered (and what they are)
Event() - Constructor for class com.ergotech.secs.Event
EVENT_DISABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an event is disabled.
EVENT_ENABLED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an event is enabled.
EVENT_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an event is registered.
EVENT_TRIGGERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an event is triggered.
EVENT_UNKNOWN - Static variable in class com.ergotech.secs.SecsEvent
eventListeners - Variable in class com.ergotech.secs.SessionManager: The event listeners for this session.
eventMessageToJSON(GemToolModelSnapshot.GemReportVariable, List<ReportValues>, String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Encode an event message to JSON.
EventOutSpooler - Class in com.ergotech.secs.gem: This will spool all outgoing messages from the time a primary is sent until the response is received.
EventOutSpooler() - Constructor for class com.ergotech.secs.gem.EventOutSpooler
EventSpooler - Class in com.ergotech.secs.gem: This will spool all outgoing messages from the time a primary is received until the response is sent.
executeCommand(ArrayValueObject) - Method in class com.ergotech.vib.manipulators.CommandExecutor: Execute the command.
executeInScriptInternal(ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This method will execute the script.
executeScript(ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This method will execute the script by calling executeScriptInternal.
executeScriptInternal(ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This method will execute the script.
executeScriptInternal(String, ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This method will execute the script.
EXPORT_READ_ONLY - Static variable in class com.ergotech.vib.servers.SimpleDataSource: Export this instance read-only to, for example, OPC.
EXPORT_READ_WRITE - Static variable in class com.ergotech.vib.servers.SimpleDataSource: Export this instance read-write to, for example, OPC.
expression - Variable in class com.ergotech.vib.manipulators.string.StringSplitter
ExtremeServer - Class in com.ergotech.vib.servers: This is a data source for testing Boolean components.
ExtremeServer() - Constructor for class com.ergotech.vib.servers.ExtremeServer: The default constructor which sets the timebase to 1.0 and initializes this to have a Boolean data type output.

F

F0_ERROR - Static variable in class com.ergotech.secs.SecsMsg: Indicates that the transaction completed with a Function 0 message.
F0_ERROR - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: Indicates that the transaction completed with a Function 0 message.
factoryAvailable(String) - Method in class com.ergotech.vib.ports.PortFactoryManager: This will let a client know if there is already a factory by that name.
FALLING_EDGE - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: Only send the message on the FALLING edge.
fatal(String) - Method in class com.ergotech.transsecs.secs.Log4JLogger: write a very important message to the log
FCB1 - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
FCB2 - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
FCNID - Class in com.ergotech.secs: Function Identification.
FCNID(int) - Constructor for class com.ergotech.secs.FCNID: Create a new message with an 1-Byte integer (SecsFormat51).
FCNID(SecsFormat) - Constructor for class com.ergotech.secs.FCNID
FDL_STATUS - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
fetchWriteDeviceServers - Static variable in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: We maintain a list of all instances of ModbusDeviceServers which can be readily accessed when creating a list for the editor.
fetchWriteDeviceServers - Static variable in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: We maintain a list of all instances of Device Servers which can be readily accessed when creating a list for the editor.
FILE_RECIPE_MANAGER - Static variable in class com.ergotech.transsecs.secs.TransSecsController: File Recipe Manager type.
fileName - Variable in class com.ergotech.vib.manipulators.SoundClipPlayer: The file or URL that we are about to play.
FileRead - Class in com.ergotech.transsecs.secs: Use Case: It is desired to map a recipe to a file.
FileRead() - Constructor for class com.ergotech.transsecs.secs.FileRead: Default constructor.
FileRecipeManager - Class in com.ergotech.transsecs.secs: Use Case: It is desired to map a recipe to a file.
FileRecipeManager() - Constructor for class com.ergotech.transsecs.secs.FileRecipeManager: Default constructor.
findController(String) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Find a passiveWrapper for a given name.
findLimit(GemVID, int) - Method in class com.ergotech.secs.gem.GemHandler: This gets a specific GEM limitID
findTool() - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Finds the tool for the value of the instance variable "tool".
FinsDeviceServer - Class in com.ergotech.vib.servers.fins
FinsDeviceServer() - Constructor for class com.ergotech.vib.servers.fins.FinsDeviceServer: Default constructor.
finsDeviceServers - Static variable in class com.ergotech.vib.servers.fins.FinsDeviceServer: We maintain a list of all instances of FINSDeviceServers which can be readily accessed when creating a list for the editor.
FinsDInt - Class in com.ergotech.vib.servers.fins
FinsDInt() - Constructor for class com.ergotech.vib.servers.fins.FinsDInt: Create the Fins Server.
FinsFloat - Class in com.ergotech.vib.servers.fins
FinsFloat() - Constructor for class com.ergotech.vib.servers.fins.FinsFloat: Create the FinsFloat.
FinsPLC - Class in com.ergotech.vib.servers.fins: This beans implements the PLC side of a FINS/UDP connection.
FinsPLC() - Constructor for class com.ergotech.vib.servers.fins.FinsPLC
FinsPLC.FinsPLCStarter - Class in com.ergotech.vib.servers.fins: The unit test code for the Fins code.
FinsPLCStarter(String) - Constructor for class com.ergotech.vib.servers.fins.FinsPLC.FinsPLCStarter
FinsServer - Class in com.ergotech.vib.servers.fins: This is the abstract superclass of the FINS protocol.
FinsServer() - Constructor for class com.ergotech.vib.servers.fins.FinsServer: Default constructor.
FinsString - Class in com.ergotech.vib.servers.fins
FinsString() - Constructor for class com.ergotech.vib.servers.fins.FinsString: Create the Fins Server.
firstPublish - Variable in class com.ergotech.transsecs.secs.VIBMessageBean: This is set for the first publish for each published item.
FLOAT - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
FLOAT_VALUE - Static variable in class com.ergotech.vib.servers.plc.PLCServer: The value type FLOAT
FloatFluxServer - Class in com.ergotech.vib.servers: This is a data source for testing components that generates a float value.
FloatFluxServer() - Constructor for class com.ergotech.vib.servers.FloatFluxServer: Constructor.
FLOATTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
Floor - Class in com.ergotech.vib.manipulators: Returns the floor of the input.
Floor() - Constructor for class com.ergotech.vib.manipulators.Floor: Generic Constructor.
flushBase64() - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Method added by PHIL.
forceDependency() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Force a dependency on the com.ergotech.vib.ports.TCPPassivePortFactory.
forceLoad(String) - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.ab.DF1DeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.fins.FinsDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: This is generated by the property editor to force a reference to the DeviceServer for genjar.
forceLoad(String) - Static method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: This is generated by the property editor to force a reference to the DeviceServer for genjar.
formatterString - Variable in class com.ergotech.vib.manipulators.DecimalFormatter: the String representing the format for the label display
fromBCD(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Convert the incoming value from a BCD value.
fromBCD(int, int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Convert the incoming value from a BCD value.
FULL - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
function - Variable in class com.ergotech.secs.S0F0: The function of this message (default is zero).
FUNCTION - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The location of the FUNCTION in a Modbus message.
FUNCTION_CODE_3X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The function code for 3X registers.
FUNCTION_CODE_4X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The function code for 4X registers.

G

GemAlarmsEnabled - Class in com.ergotech.secs.gem: storage for a ECID.
GemAlarmsEnabled() - Constructor for class com.ergotech.secs.gem.GemAlarmsEnabled
GemAlarmsSet - Class in com.ergotech.secs.gem: storage for a ECID.
GemAlarmsSet() - Constructor for class com.ergotech.secs.gem.GemAlarmsSet
GemAlarmVariable() - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable: Create the ID.
GemAlarmVariable(String, long, boolean, boolean) - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable: Create the ID.
GemALID - Class in com.ergotech.secs.gem: This holds all information about a single alarm.
GemALID() - Constructor for class com.ergotech.secs.gem.GemALID
GemCEID - Class in com.ergotech.secs.gem: This server maintains the information associated with a CEID.
GemCEID() - Constructor for class com.ergotech.secs.gem.GemCEID: Default Constructor.
GemCEIDExportInterface - Interface in com.ergotech.secs.gem: This interface is implemented only by GemCEID and is used by OPC (and possibly other) code to prevent the GemCEID and all dependecies from being pulled into the OPC implementation.
GemCLOCK - Class in com.ergotech.secs.gem: The GEM Clock.
GemCLOCK() - Constructor for class com.ergotech.secs.gem.GemCLOCK
GemCommunicationsState - Class in com.ergotech.secs.gem: storage for a Communications State.
GemCommunicationsState() - Constructor for class com.ergotech.secs.gem.GemCommunicationsState
gemCompliant - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: Whether we are running with GEM compliance.
GemControlState - Class in com.ergotech.secs.gem: storage for a Control State.
GemControlState() - Constructor for class com.ergotech.secs.gem.GemControlState
GemDevicesSVID - Class in com.ergotech.secs.gem: storage for a SVID that is maintained by the GEM infrastructure but still sent to the PLC/Device.
GemDevicesSVID() - Constructor for class com.ergotech.secs.gem.GemDevicesSVID: Create and add a default validator.
GemDVNAME - Class in com.ergotech.secs.gem: storage for a DVNAME
GemDVNAME() - Constructor for class com.ergotech.secs.gem.GemDVNAME
GemECID - Class in com.ergotech.secs.gem: storage for a ECID.
GemECID() - Constructor for class com.ergotech.secs.gem.GemECID: Create and add a default validator.
GemEquipment - Class in com.ergotech.secs.gem: This class is the entry point for any gem interface.
GemEquipmentInterface - Interface in com.ergotech.secs.gem: This is the primary equipment interface to the GEM package.
GemEventsEnabled - Class in com.ergotech.secs.gem: storage for a ECID.
GemEventsEnabled() - Constructor for class com.ergotech.secs.gem.GemEventsEnabled
GemException - Exception in com.ergotech.secs.gem: An exception thrown by GEM to indicate a configuration specific error.
GemException(Exception) - Constructor for exception com.ergotech.secs.gem.GemException: Create the exception with an embedded exception.
GemException(String) - Constructor for exception com.ergotech.secs.gem.GemException: Create the exception with a message.
GemHandler - Class in com.ergotech.secs.gem: This is a MessageHandler that will handle all the messages needed to configure limits.
GemHostCEID - Class in com.ergotech.secs.gem
GemHostCEID() - Constructor for class com.ergotech.secs.gem.GemHostCEID
GemHostModel - Class in com.ergotech.secs.gem: This model is created by the host and used in the configuration of alarms, events, reports and limits.
GemHostModel() - Constructor for class com.ergotech.secs.gem.GemHostModel: Default constructor.
GemHostModel.GemValueVariable - Class in com.ergotech.secs.gem: This adds the "vid" variables.
GemID - Class in com.ergotech.secs.gem: This will store any of the ID's.
GemID() - Constructor for class com.ergotech.secs.gem.GemID: The default constructor.
GemIDConnection - Class in TransSECS
GemIDConnection.ValueConverter - Class in TransSECS: Converts from a value object to a value.
GemLastControlState - Class in com.ergotech.secs.gem: storage for a Last Control State.
GemLastControlState() - Constructor for class com.ergotech.secs.gem.GemLastControlState
GemLIMITID - Class in com.ergotech.secs.gem: This manipulator will keep track of the state of the limitid.
GemLIMITID() - Constructor for class com.ergotech.secs.gem.GemLIMITID: Default constructor.
GemLimitVariable() - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemLimitVariable: Create the ID.
GemLimitVariable(String, long, double, double, long) - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemLimitVariable: Create the ID.
GemMDLN - Class in com.ergotech.secs.gem: The GEM MDLN.
GemMDLN() - Constructor for class com.ergotech.secs.gem.GemMDLN
GemReportVariable() - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable: Create the ID.
GemReportVariable(String, long, List<Long>, GemToolModelSnapshot.GemReportVariable.VariableType, boolean) - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable: Create the ID.
GemRPTID - Class in com.ergotech.secs.gem: This will store all the information about a specific report.
GemRPTID() - Constructor for class com.ergotech.secs.gem.GemRPTID
GemSOFTREV - Class in com.ergotech.secs.gem: The GEM MDLN.
GemSOFTREV() - Constructor for class com.ergotech.secs.gem.GemSOFTREV
GemSpoolHandler - Class in com.ergotech.secs.gem: This is a MessageHandler for Spooling
GemSVID - Class in com.ergotech.secs.gem: storage for a SVID
GemSVID() - Constructor for class com.ergotech.secs.gem.GemSVID
GemTimeFormat - Class in com.ergotech.secs.gem: storage for a ECID.
GemTimeFormat() - Constructor for class com.ergotech.secs.gem.GemTimeFormat
GemToolModelSnapshot - Class in com.ergotech.secs.gem: Instances of this object are created and then stored by the GEM Handler - and the reverse from which a GEMHandler is configured.
GemToolModelSnapshot() - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot: Default constructor.
GemToolModelSnapshot.GemAlarmVariable - Class in com.ergotech.secs.gem: This adds the "set" variable that the tool side uses to store the current state of the alarm.
GemToolModelSnapshot.GemLimitVariable - Class in com.ergotech.secs.gem: This adds the configuration for a limit id.
GemToolModelSnapshot.GemReportVariable - Class in com.ergotech.secs.gem: This adds a list of VIDs that are associated with this report.
GemToolModelSnapshot.GemReportVariable.VariableType - Enum in com.ergotech.secs.gem
GemToolModelSnapshot.GemVariable - Class in com.ergotech.secs.gem: Storage for an ID/value pair.
GemToolPersistentModelSnapshot - Class in com.ergotech.secs.gem: Adds Serializable to the model.
GemToolPersistentModelSnapshot() - Constructor for class com.ergotech.secs.gem.GemToolPersistentModelSnapshot
GemValueVariable() - Constructor for class com.ergotech.secs.gem.GemHostModel.GemValueVariable: Create the ID.
GemValueVariable(String, long, int, int) - Constructor for class com.ergotech.secs.gem.GemHostModel.GemValueVariable: Create the ID.
GemVariable() - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable: Create the ID.
GemVariable(String, long) - Constructor for class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable: Create the ID.
GemVID - Class in com.ergotech.secs.gem: This will store the current value of a VID.
GemVID() - Constructor for class com.ergotech.secs.gem.GemVID: Create the GemVID.
generateAlarm(GemALID) - Method in interface com.ergotech.secs.gem.AlarmWriter
generateAlarm(GemALID) - Method in class com.ergotech.secs.gem.GemHandler: This will be called by the alarm when it wants to send a specific alarm.
generateRandomString() - Method in class com.ergotech.vib.servers.RandomStringServer: generates an alphanumeric string of the desired length
generateReport(GemCEID, ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemHandler: This will be called by the report when it wants to send a specific report.
generateReport(GemCEID, ValueObjectInterface, int, SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This will be called by the report when it wants to send a specific report.
generateReport(GemCEID, ValueObjectInterface, int, SecsMsg, boolean) - Method in class com.ergotech.secs.gem.GemHandler: This will be called by the report when it wants to send a specific report.
generateReport(GemCEID, ValueObjectInterface) - Method in interface com.ergotech.secs.gem.ReportWriter
GenericCompare - Class in com.ergotech.vib.manipulators: Compares the two inputs.
GenericCompare() - Constructor for class com.ergotech.vib.manipulators.GenericCompare: Generic Constructor.
GenericDateFormatter - Class in com.ergotech.vib.manipulators.datetime: A simple extension of DateInfo.
GenericDateFormatter() - Constructor for class com.ergotech.vib.manipulators.datetime.GenericDateFormatter: Generic Constructor.
GenericValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
GenericValueObject() - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: The default constructor.
GenericValueObject(boolean, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current value a boolean and the color associated with that value newColor
GenericValueObject(boolean) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current boolean value.
GenericValueObject(char, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current char value and the color associated with that value (newColor).
GenericValueObject(char) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current char value.
GenericValueObject(byte, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current byte value and the color associated with that value (newColor).
GenericValueObject(byte) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current byte value.
GenericValueObject(short, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current short value and the color associated with that value (newColor).
GenericValueObject(short) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current short value.
GenericValueObject(int, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current integer value.
GenericValueObject(int) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current integer value.
GenericValueObject(long, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current long value and the color associated with that value (newColor).
GenericValueObject(long) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current long value.
GenericValueObject(float, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current float value and the color associated with that value (newColor).
GenericValueObject(float) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current float value.
GenericValueObject(double, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current double value and the color associated with that value (newColor).
GenericValueObject(double) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current double value.
GenericValueObject(String, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current String value and the color associated with that value.
GenericValueObject(String) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current String value.
GenericValueObject(Serializable, Color) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current value a Serializable Object and the color associated with that value.
GenericValueObject(Serializable) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current value a Serializable Object.
GenericValueObject(Serializable, boolean) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current value a Serializable Object.
GenericValueObject(Object) - Constructor for class com.ergotech.vib.valueobjects.GenericValueObject: Creates a value object with the current value a Serializable Object.
get(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Returns the element at the given location in the array.
get_Message() - Method in class TransSECS.MessageNotifierEventArgs
get_Status() - Method in class TransSECS.MessageNotifierEventArgs
getAbortTransaction() - Method in class com.ergotech.secs.SecsMsg: This will return the abort transaction for the current stream.
getAbortTransaction(int) - Static method in class com.ergotech.secs.SecsMsg: This will return the abort transaction for a specific stream.
getACK(PortInterface) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Return on valid ACK or return an error code on NAK or other error.
getActiveConnectionRetryInterval() - Method in class com.ergotech.transsecs.secs.TransSecsController: Frequency of connection attempt of all active connections.
getActiveEntityFlag() - Method in class com.ergotech.secs.ConnectionManager: Returns true if we are the active entity or host, otherwise false.
getActivePort() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active port.
getActivePort() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Returns the port that this object will use to make an active (host) connection.
getActiveT1() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT1() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT2() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT2() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT3() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT3() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT4() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT4() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT5() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT5() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT6() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT6() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT7() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT7() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveT8() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getActiveT8() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
getActiveToolTarget() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Returns the tool that will be the target.
getAdditionalWhere() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the additional where part of the SQL statement
getAddress() - Method in class com.ergotech.vib.servers.ab.DF1Server: Returns the PLC address.
getAddress() - Method in class com.ergotech.vib.servers.fins.FinsServer: Returns the PLC address.
getAddress() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns the PLC address.
getAddress() - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Returns the PLC address.
getAddress() - Method in class com.ergotech.vib.servers.ppi.PPIServer: Returns the PLC address.
getAddressInternal() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Returns the PLC internal address.
getAddressType() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Return the address type.
getAddressType() - Method in class com.ergotech.vib.servers.plc.PLCServer: Return the address type.
getAdjustedDate() - Method in class com.ergotech.secs.gem.GemHandler: This will return a date string in the form required by the CLOCK DDVAL.
getAdministrators() - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
getAlarm(SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: Returns the alarm server associated with the given alid.
getAlarmsSet() - Method in class com.ergotech.secs.gem.GemHandler: Returns a list of all alids.
getAlarmWriter() - Method in class com.ergotech.secs.gem.GemALID
getALCD() - Method in class com.ergotech.secs.gem.GemALID: Returns the alarm code.
getALED() - Method in class com.ergotech.secs.gem.GemALID: Returns the alarm enabled flag.
getALID(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Return a variable associated with the provided ceid, or null if the ceid is unknown.
getAlids() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot
getALIDs(EquipmentData, EditorPanel, ALIDsData, SessionManager) - Static method in class com.ergotech.transsecs.secs.Characterization: This method will attempt to get as much information as possible ECIDs.
getAlids() - Method in class com.ergotech.transsecs.secs.TransSecsController
getAlidSecsFormat() - Method in class com.ergotech.secs.gem.GemHostModel
getAllALIDs() - Method in class com.ergotech.secs.gem.GemHandler: Returns the alids
getAllCEIDs() - Method in class com.ergotech.secs.gem.GemHandler: Returns the ceids
getAllDVIDs() - Method in class com.ergotech.secs.gem.GemHandler: Returns the ecids
getAllECIDs() - Method in class com.ergotech.secs.gem.GemHandler: Returns the ecids
getAllMessages() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns a list of all messages
getAllowDuplicateMessages() - Method in class com.ergotech.secs.SecsIConnectionManager: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
getAllowDuplicateMessages() - Method in class com.ergotech.secs.SecsIWrapper: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
getAllReports() - Method in class com.ergotech.secs.gem.GemCEID: Returns a vector of all the reports that are linked to this CEID.
getAllRPTID() - Method in class com.ergotech.secs.gem.GemHandler: Returns the rptids
getAllSessions() - Method in class com.ergotech.secs.HSMSPassiveWrapper: This will return back a Vector of SessionManagers associated with this connection.
getAllSessions() - Method in class com.ergotech.secs.HSMSSocketListener: This will return back a Vector of SessionManagers associated with this connection.
getAllSVIDs() - Method in class com.ergotech.secs.gem.GemHandler: Provide a connection for the equipment.
getAllUsers() - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
getALTX() - Method in class com.ergotech.secs.gem.GemALID: Returns the alarm text.
getAlwaysSend() - Method in class com.ergotech.vib.valueobjects.ValueObject: This is if you always want this value to be send to the client...
getAlwaysSend() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will force the value to be sent to the client, even if the value hasn't changed.
getArray() - Method in class com.ergotech.secs.SecsDataStructure: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in interface com.ergotech.secs.SecsFormat: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat00: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat10: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat11: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat20: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat22: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat30: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat31: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat32: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat34: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat40: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat44: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat50: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat51: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat52: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.secs.SecsFormat54: This allows for arrays of secsformats (not a list of secsformats).
getArray() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getArraySize() - Method in class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Returns the size of the array to read.
getAutoMode() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for automode
getAutoReset() - Method in class com.ergotech.vib.manipulators.Counter
getAutoResponseMessages() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns a list of messages to which we are expected to automatically respond.
getAutoSuspend() - Method in class com.ergotech.vib.servers.DataSource: Returns whether or not a server will autosuspend
getBaseDirectory() - Method in class com.ergotech.transsecs.secs.FileRead: Returns the directory of the file.
getBaseDirectory() - Method in class com.ergotech.transsecs.secs.FileRecipeManager: Returns the directory of the file.
getBaudRate() - Method in class com.ergotech.secs.SecsIWrapper: Returns the current baud rate.
getBaudRate() - Method in class com.ergotech.secs.SerialPortManager: Gets the port value of the server.
getBaudRate() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns the Baud Rate.
getBaudRate() - Method in class com.ergotech.transsecs.secs.TransSecsController: return the baud rate.
getBaudRate() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the baud rate.
getBaudRate() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the baud rate.
getBaudRate() - Method in class com.ergotech.vib.ports.SerialWrapper: This is the baud rate.
getBaudRate() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
getBaudRate() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
getBaudRate() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave
getBaudRate() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer
getBaudRate() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
getBeanDebugLevel() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: This gets the debug level of this bean.
getBigIntegerValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value as a BigInteger.
getBinaryAt(int) - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: This will set a specific element in the array.
getBinaryValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: This will return the current value of the ValueObject as a byte array.
getBinaryValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a byte array by calling getByteValue on each element of the array.
getBinaryValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: This will return the binary array.
getBinaryValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: This will return the current value of the ValueObject as a byte array.
getBinaryValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value of the ValueObject as a byte array.
getBinaryValue() - Method in class com.ergotech.vib.valueobjects.ValueObject: This will return the current value of the ValueObject as a byte array.
getBinaryValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a byte array.
getBinaryValue() - Method in class TransSECS.Value
getBit() - Method in class com.ergotech.vib.manipulators.BitSelector: accesses the bit to be filtered.
getBit() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the bit of the word of interest.
getBitCount() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the number of bits required from the word of interest.
getBlockNumber(byte[]) - Static method in class com.ergotech.secs.SecsISessionManager: Returns the block number from the byte stream provide.
getBlocksForType(String) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Find the appropriate blocks.
getBlockType() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Returns the type of this block.
getBlueToothAddress() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer
getBooleanOutput() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets whether or not to generate only true/false array.
getBooleanValue() - Method in class com.ergotech.vib.servers.ArrayDataSource: This will return a random 0 or 1
getBooleanValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the boolean value of the current value object.
getBooleanValue() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: This will return a random 0 or 1
getBooleanValue(int) - Method in class TransSECS.GemIDConnection: Get the current value of the VID as a boolean.
getBooleanYColumns() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets number of boolean columns to generate
getBoolValue() - Method in class com.ergotech.secs.ACKA: Returns the bool value of this object.
getBoolValue() - Method in class com.ergotech.secs.CEED
getBoolValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.secs.RCPOWCODE
getBoolValue() - Method in class com.ergotech.secs.RCPRENAME
getBoolValue() - Method in class com.ergotech.secs.RCPUPDT
getBoolValue() - Method in class com.ergotech.secs.RMREQUESTOR
getBoolValue() - Method in class com.ergotech.secs.SecsDataStructure
getBoolValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a boolean.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the boolean representation of the object.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the true if the length of the data is non-zero.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the true if the length of the data is non-zero.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat30: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat31: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat32: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat34: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat40: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat44: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat50: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat51: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat52: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.secs.SecsFormat54: Returns true if the value is non-zero, otherwise false.
getBoolValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getBoolValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the boolean value of the current value object.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as a boolean.
getBoolValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a boolean.
getBoolValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a boolean.
getBoolValue() - Method in class TransSECS.Value
getByteCount() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the byte count.
getByteOffset() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.ab.DF1Server: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.fins.FinsServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.modbus.Modbus0XServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the offset of the register of this server.
getByteOffset() - Method in class com.ergotech.vib.servers.ppi.PPIServer: Returns the offset of the register of this server.
getByteSwapString() - Method in class com.ergotech.vib.servers.fins.FinsServer: Returns whether strings are byte-swapped.
getByteSwapString() - Method in class com.ergotech.vib.servers.fins.FinsString: Returns whether strings are byte-swapped.
getByteSwapString() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns whether strings are byte-swapped.
getByteSwapString() - Method in class com.ergotech.vib.servers.melsec.MelsecString: Returns whether strings are byte-swapped.
getByteSwapString() - Method in class com.ergotech.vib.servers.modbus.ModbusString: Returns whether strings are byte-swapped.
getByteSwapString() - Method in class com.ergotech.vib.servers.modbus.ModbusStringArray: Returns whether strings are byte-swapped.
getByteValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.secs.SecsDataStructure
getByteValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getByteValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getByteValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a short.
getByteValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a byte.
getByteValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getByteValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as an byte.
getByteValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a byte.
getByteValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a byte.
getByteValue() - Method in class TransSECS.Value
getCARRIERID() - Method in class com.ergotech.secs.CarrierSlotData
getCaseSensitive() - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This is if the strings (both true and false) are case sensitive or not.
getCategoryTimebase() - Method in class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer
getCategoryType() - Method in class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer
getCEID(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Return a variable associated with the provided ceid, or null if the ceid is unknown.
getCEID(String) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Return a variable associated with the provided ceid, or null if the ceid is unknown.
getCEID() - Method in class com.ergotech.secs.gem.GemVID: Returns the CEID associated with vid monitoring.
getCeids() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot
getCeids() - Method in class com.ergotech.transsecs.secs.TransSecsController
getCeidSecsFormat() - Method in class com.ergotech.secs.gem.GemHostModel
getChangeColorTo() - Method in class com.ergotech.vib.manipulators.PropertyFilter
getChangeTime() - Method in class com.ergotech.vib.manipulators.PropertyFilter: Get whether or not to change the time in the outgoing ValueObject.
getChannel() - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
getCharValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as a char.
getCharValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as a char.
getClassFromHeader() - Method in class com.ergotech.secs.SecsMsg: Returns the class that corresponds to the type of this message.
getClassLicenseManager() - Static method in class com.ergotech.vib.servers.SimpleDataSource
getClassPackage() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the class package.
getClearCEID() - Method in class com.ergotech.secs.gem.GemALID: Returns the CEID to send when the alarm is cleared.
getCMD() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the CMD.
getCoilCount() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getCoilNotifyMax() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getCoilNotifyMax() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
getCoilNotifyMin() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getCoilNotifyMin() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
getColor() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current color for the data.
getColor() - Method in class com.ergotech.vib.valueobjects.ValueObject: This will return the color associated with the current value.
getColor() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current Color of the Value Object.
getColorHi() - Method in class com.ergotech.vib.servers.DataSource: Returns the color for the server's Hi level.
getColorHiHi() - Method in class com.ergotech.vib.servers.DataSource: Returns the color for the server's HiHi level.
getColorLo() - Method in class com.ergotech.vib.servers.DataSource: Returns the color for the server's Lo level.
getColorLoLo() - Method in class com.ergotech.vib.servers.DataSource: Returns the color for the server's LoLo level.
getColorNormal() - Method in class com.ergotech.vib.servers.DataSource: The normal color is sent any time the value is not in one of the other bands
getColumnCount() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the number of columns.
getColumnData(int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is used to get all the data for a specific column.
getColumnName(int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the name of a sepecific column.
getColumnNames() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the vector of names.
getCommand() - Method in class com.ergotech.vib.manipulators.CommandExecutor
getCommunicationsHandler() - Method in class com.ergotech.secs.gem.GemEquipment: This returns the Communication Handler.
getCondition() - Method in class com.ergotech.secs.gem.Monitor: Returns the condition.
getCondition(String) - Static method in class com.ergotech.secs.MessageVerifierOneItem
getConnectionConfig(String) - Static method in class com.ergotech.transsecs.secs.ConnectionConfig
getConnectionConfig() - Method in class com.ergotech.transsecs.secs.TransSecsController
getConnectionLimit() - Method in class com.ergotech.secs.HSMSPassiveWrapper: Returns the current connection limit.
getConnectionLimit() - Method in class com.ergotech.secs.HSMSSocketListener: Remove a connection manager from this socket manager.
getConnectionLimit() - Method in class com.ergotech.secs.HSMSSocketManager: Remove a connection manager from this socket manager.
getConnectionManager() - Method in class com.ergotech.secs.PortManager: Returns the current connection.
getConnectionManager() - Method in class com.ergotech.secs.SessionManager: Set the connection manager.
getConnectionManagerForId(int, String) - Static method in class com.ergotech.secs.PortManager: Returns a connection manager for the provided ID.
getConnectOnSend() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns connect on send.
getConnectors() - Method in class com.ergotech.vib.servers.DataSource: This will return the vector of all our current connectors.
getConsoleLogger() - Static method in class com.ergotech.vib.servers.DataSource
getConstantValue() - Method in class com.ergotech.vib.manipulators.Constant
getContainer() - Method in class com.ergotech.vib.servers.DataSource: If this datasource has a parent, then the parent's container is returned, otherwise null.
getContainer() - Method in class com.ergotech.vib.servers.SimpleDataSource
getController() - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This will find the transSecsController for the subclass and create one if this it can't find one.
getController() - Method in class TransSECS.GemIDConnection
getControllerName() - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Returns the controller name.
getControllerName() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the passive port name.
getControllerName() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the message port name.
getControllerPort() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the controller port.
getControlLogixEthernetDeviceServers() - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
getControlLogixEthernetDeviceServers() - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
getCountUp() - Method in class com.ergotech.vib.manipulators.Counter
getCPNAME() - Method in class com.ergotech.secs.CPNAMEVALPAIR
getCPVAL() - Method in class com.ergotech.secs.CPNAMEVALPAIR
getCurrentColor() - Method in class com.ergotech.vib.servers.DataSource: This will return the color that is associated with the current value of the data source.
getCurrentQualitySetting() - Method in class com.ergotech.transsecs.secs.PublishBean
getCurrentState() - Method in class com.ergotech.secs.gem.CommunicationsHandler: This will return the current state of the machine.
getCurrentState() - Method in class com.ergotech.secs.gem.OnlineHandler: This will return the current state.
getCurrentValue() - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable: Return the current value of the variable.
getCustomTimer() - Method in class com.ergotech.vib.servers.SimpleDataSource: if we need our own Timer.
getD() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for the derivative parameter
getData(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This will return the data from the message provide.
getData() - Method in class com.ergotech.secs.S0F0: Returns the message as a SecsFormat.
getData() - Method in class com.ergotech.secs.SecsDataStructure: Return the raw SecsFormat object.
getData() - Method in class com.ergotech.secs.SecsMsg: This method converts the raw, or unconverted message to SECS data structures.
getData() - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Returns the data array.
getDataBits() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the data bits.
getDataBits() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the data bits.
getDataBits() - Method in class com.ergotech.vib.ports.SerialWrapper: This is the data bits.
getDataFormats() - Method in class com.ergotech.secs.SecsMsg: This method will return the data formats from the SECS Message.
getDataFormatsRecursive() - Method in class com.ergotech.secs.SecsMsg: Returns a SecsFormat object, representing this message.
getDataId() - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the dataId.
getDataIdSecsFormat() - Method in class com.ergotech.secs.gem.GemHostModel
getDataSource(String) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Added for backward compatibility.
getDataSource(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the data source with the given Name.
getDataSourceName() - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable
getDataSourceName() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable
getDataSourceName() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemLimitVariable
getDataSourceName() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable
getDataSourceName() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable
getDataSourceName() - Method in class com.ergotech.vib.servers.DataSource: Returns the applicationName of this component.
getDataSources() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the enumeration of data sources.
getDataType() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns dataType.
getDataValuesToWrite() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
getDate() - Method in class com.ergotech.secs.STIME: Returns the value of this object as java.util.Date object.
getDate() - Method in class com.ergotech.secs.TIME: Returns the value of this object as java.util.Date object.
getDate() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the date that the value was created.
getDate() - Method in class com.ergotech.vib.valueobjects.ValueObject: This is the date and time when the value was created.
getDate() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the date that the value was created.
getDateFormatter() - Method in class com.ergotech.vib.manipulators.Emailer: This is the date formatter used (by java.text.SimpleDataFormatter) to display the date (if setDate is true).
getDateOffset() - Method in class com.ergotech.secs.gem.GemHandler: Returns the current date offset.
getDefault() - Static method in class com.ergotech.secs.MessageVerifier
getDefault() - Static method in class com.ergotech.secs.SessionManager: Returns the port manager that will be the default active port on a new thread.
getDefaultAllowDuplicateMessages() - Static method in class com.ergotech.secs.SecsIWrapper: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
getDefaultHandler() - Static method in class com.ergotech.secs.SecsEventHandler: This will return the default handler for this machine.
getDefaultLinkTestInterval() - Static method in class com.ergotech.secs.HSMSWrapper: Sets the default link test interval.
getDefaultOfflineState() - Method in class com.ergotech.secs.gem.OnlineHandler: The control state will transition to this state if an attempt online fails.
getDefaultQualityForLocation(int) - Method in class com.ergotech.vib.manipulators.Manipulator: For any location returns QUALITY_GOOD meaning that values must be good to pass.
getDefaultQualityForLocation(int) - Method in class com.ergotech.vib.manipulators.SimpleManipulator: For any location returns QUALITY_GOOD for any secondary inputs, eg triggers meaning that values must be good to pass.
getDefaultQualityForLocation(int) - Method in class com.ergotech.vib.servers.DataSource.Writable: For any location returns QUALITY_GOOD meaning that values must be good to pass.
getDefaultQualityForLocation(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: The default for all PLC server is to only accept good quality values.
getDefaultReplaceString() - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Returns the String to replace the tokens.
getDefaultReplyBit() - Method in class com.ergotech.secs.S100F11: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F1: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F11: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F13: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F3: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F5: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F7: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.S9F9: Returns false.
getDefaultReplyBit() - Method in class com.ergotech.secs.SecsMsg: Returns the default state of the reply bit.
getDefaultRetryInterval() - Static method in class com.ergotech.secs.HSMSActiveWrapper: Sets the default retry interval.
getDefaultSelectResponse() - Static method in class com.ergotech.secs.HSMSSessionManager: Sets the global select response
getDefaultString() - Method in class com.ergotech.vib.manipulators.string.CodeToString
getDefaultValue() - Method in class com.ergotech.secs.gem.GemVID: Returns the default value as a SecsFormat.
getDefaultValue() - Method in class com.ergotech.vib.manipulators.array.ArrayElementFilter: Returns the defaultValue.
getDefinedLimits() - Method in class com.ergotech.secs.gem.GemVID: Returns all the limits that are registered for this variable in order.
getDelimiter() - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Returns the delimiter String.
getDelimiter() - Method in class com.ergotech.vib.manipulators.array.StringToArray: Returns the delimiter String.
getDescription() - Method in class com.ergotech.secs.SecsEvent: This will return the description of the SecsEvent.
getDestination() - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the destination address.
getDestinationNetworkAddress() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getDestinationNodeNumber() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getDestinationUnitNumber() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getDeviceCode() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns the device code of this server.
getDeviceId() - Method in class com.ergotech.secs.HSMSWrapper: Returns the current device id.
getDeviceId() - Method in class com.ergotech.secs.SecsIWrapper: Returns the default device Id.
getDeviceId() - Method in class com.ergotech.secs.SecsMsg: Returns the Device ID.
getDeviceId() - Method in class com.ergotech.secs.SessionManager: Returns the device id.
getDeviceId() - Method in interface com.ergotech.secs.WrapperInterface: Returns the current device id.
getDeviceId() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns the device id.
getDeviceId() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the device id for this equipment.
getDeviceName() - Method in class com.ergotech.vib.servers.plc.PLCArray: Gets the id of the server.
getDeviceName() - Method in class com.ergotech.vib.servers.plc.PLCServer: Gets the id of the server.
getDeviceServer() - Method in class com.ergotech.vib.servers.plc.PLCServer: Gets the device server.
getDF1DeviceServers() - Static method in class com.ergotech.vib.servers.ab.DF1DeviceServer
getDigitalIn(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDigitalInCount() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDigitalInRange(int, int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDigitalOut(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDigitalOutCount() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDigitalOutRange(int, int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getDirty() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: This method returns the value of the dirty flag.
getDirty() - Method in class com.ergotech.vib.servers.plc.PLCServer: This method returns the value of the dirty flag.
getDisplayBytes() - Method in class com.ergotech.secs.Logger: Returns whether the logger will display message data.
getDisplayBytes() - Method in class com.ergotech.secs.NetLogger
getDisplayBytes() - Method in class com.ergotech.secs.SyslogLogger
getDisplayBytes() - Method in class com.ergotech.transsecs.secs.VIBLogger
getDisplayMessages() - Method in class com.ergotech.secs.Logger: Returns whether the logger will display message data.
getDisplayMessages() - Method in class com.ergotech.secs.NetLogger
getDisplayMessages() - Method in class com.ergotech.secs.SyslogLogger
getDisplayMessages() - Method in class com.ergotech.transsecs.secs.VIBLogger
getDisplayName() - Method in class com.ergotech.vib.servers.SimpleDataSource
getDoubleValue() - Method in class com.ergotech.secs.DSPER: Returns the format as a number of seconds.
getDoubleValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.secs.SecsDataStructure
getDoubleValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a double.
getDoubleValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getDoubleValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the double value of the current value object.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a double.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as a double.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as a float.
getDoubleValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a double.
getDoubleValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a double.
getDoubleValue(int) - Method in class TransSECS.GemIDConnection: Get the current value of the VID as a double (which can be converted to a float if needed).
getDoubleValue() - Method in class TransSECS.Value
getDoubleYColumns() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets number of double value columns to generate
getDVIDs() - Method in class com.ergotech.secs.gem.GemCEID: Returns the collection of dvids associated with this CEID.
getDVNAME(String) - Method in class com.ergotech.secs.gem.GemHandler: Returns an ID for any type (not just a DVNAME).
getDvname(String) - Method in class com.ergotech.secs.gem.GemHandler: Returns an DVNAME (an integer ID) for the name provide or null if the name is not registered.
getECIDs(EquipmentData, EditorPanel, VIDsData, SessionManager) - Static method in class com.ergotech.transsecs.secs.Characterization: This method will attempt to get as much information as possible ECIDs.
getECs(int, S2F13) - Static method in class com.ergotech.secs.Event
getEditableServers() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Returns all the servers that are in the "serverContainer".
getElement() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the element.
getElementNames() - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: Returns the element names as a CSV
getElementNames() - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Returns the element names as a CSV
getElements() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets the number of elements to be generated for the ArrayValueObject
getEnabled() - Method in class com.ergotech.secs.gem.GemALID: This is just a pass through to setALED, but the name is more user friendly.
getEnabled() - Method in class com.ergotech.secs.gem.GemCEID: Returns true if the CEID is enabled.
getEndDate() - Method in class com.ergotech.vib.valueobjects.HistoricalValueObject: This is the ending date used for finding the range of values.
getEndExpression() - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Returns the expected end of the response.
getEndingDate() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject
getEndRemove() - Method in class com.ergotech.vib.manipulators.string.StringTrimmer: Returns the end remove value.
getEndTime() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the end time for the WHERE
getEquipment() - Method in class com.ergotech.secs.gem.GemEquipment: This returns the Equipment Control.
getEquipmentHostName() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
getEquipmentHostName() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: The host name of the equipment.
getEquipmentName() - Method in class com.ergotech.secs.gem.CommunicationsHandler
getEquipmentName() - Method in class com.ergotech.secs.gem.GemHandler
getEquipmentName() - Method in class com.ergotech.secs.gem.OnlineHandler
getEquipmentName() - Method in class com.ergotech.secs.TransactionManager
getEquipmentWrapper() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the only passiveWrapper we know about, the passive (equipment) passiveWrapper.
getERRCODE() - Method in class com.ergotech.secs.ERRPAIR
getError() - Method in class com.ergotech.secs.SecsMsg: Returns the current error.
getErrorCode() - Method in exception com.ergotech.secs.SecsException: Returns the error code.
getErrorCode() - Method in exception com.ergotech.vib.servers.plc.PLCException: Returns the error code .
getErrorConnector() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Search the sources for a connector with the inport ERROR_STATUS_NAME with a source of a VIBMessageBean and the outport ERROR_STATUS_NAME
getErrorString(int) - Static method in class com.ergotech.vib.servers.ab.DF1Server: Maps error codes to error strings.
getErrorString(int) - Static method in class com.ergotech.vib.servers.fins.FinsServer: Maps error codes to error strings.
getErrorString(int) - Static method in class com.ergotech.vib.servers.melsec.MelsecServer: Maps error codes to error strings.
getErrorString(byte) - Static method in class com.ergotech.vib.servers.modbus.ModbusServer: Maps error codes to error strings.
getErrorString(int) - Static method in class com.ergotech.vib.servers.omron.HostLinkServer: Maps error codes to error strings.
getErrorString(int) - Static method in class com.ergotech.vib.servers.ppi.PPIServer: Maps error codes to error strings.
getErrorSubCode() - Method in exception com.ergotech.vib.servers.plc.PLCException: Returns the sub-error code.
GetERRTEXT() - Method in class com.ergotech.secs.ERRPAIR
getEtherNetIP() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer.EIPPort: Return the real EtherNetIP instance.
getEvent() - Method in class com.ergotech.transsecs.secs.SecsEventFilter
getEvents() - Method in class com.ergotech.transsecs.secs.VIBLogger
getEventSpooler(String) - Static method in class com.ergotech.secs.gem.EventSpooler: Return an existing or new event spooler for the given equipment name.
getException() - Method in class com.ergotech.secs.SecsMsg: This will return the conversion exception during the conversion process.
getExpectsReply(byte[]) - Method in class com.ergotech.secs.SessionManager: Returns true if the message expects a reply, otherwise false.
getExportCriteria() - Method in class com.ergotech.vib.servers.SimpleDataSource
getExpression() - Method in class com.ergotech.vib.manipulators.string.StringSplitter: Returns the delimiter list.
getFactory(String, Object) - Method in class com.ergotech.vib.ports.PortFactoryManager: Calling this methods inidicates that a component is interested in this factory and will (presumably) be calling "checkin/checkout" at some later date to get access to the underlying resource.
getFetchWriteDeviceServers() - Static method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
getFetchWriteDeviceServers() - Static method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer
getFile() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the file.
getFileExtension() - Method in class com.ergotech.transsecs.secs.FileRecipeManager: The file extension.
getFileName() - Method in class com.ergotech.transsecs.secs.FileRead: Returns the name of the file.
getFileName() - Method in class com.ergotech.vib.manipulators.UserFileReader
getFinsDeviceServers() - Static method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getFloatValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.secs.SecsDataStructure
getFloatValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat00: Add a simple type to the list
getFloatValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a float.
getFloatValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getFloatValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the float value of the current value object.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as an float.
getFloatValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a float.
getFloatValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a float.
getFloatValue() - Method in class TransSECS.Value
getFlowControl() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice
getFlowControl() - Method in class com.ergotech.vib.ports.SerialWrapper: The flow control for both input and output.
getFlowControl() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
getFlowControl() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
getFlowControl() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
getFNC() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the FNC.
getFormatInfo() - Method in class com.ergotech.vib.manipulators.datetime.DateInfo: This will set the format information that a SimpleDateFormatter will use.
getFormattedBytes() - Method in class com.ergotech.secs.SecsDataStructure: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in interface com.ergotech.secs.SecsFormat: Returns an array of bytes suitable for use in a SECS Message.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat00: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat10: Returns an array of bytes suitable for use in a SECS Message.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat11: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat20: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat22: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat30: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat31: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat32: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat34: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat40: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat44: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat50: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat51: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat52: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsFormat54: Returns the list in a manner suitable for encoding directly into a SECS message byte stream used over SECSI or HSMS transport.
getFormattedBytes() - Method in class com.ergotech.secs.SecsMsg: Converts the message to a raw byte stream.
getFormattedBytes() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getFormatter() - Method in class com.ergotech.vib.manipulators.DecimalFormatter: This will return the formatter string.
getFreqFactor() - Method in class com.ergotech.vib.servers.SineServer: Returns the frequency multiplier of the SineServer.
getFrom() - Method in class com.ergotech.vib.manipulators.Emailer: Gets the address to send we sent from.
getFunction() - Method in class com.ergotech.secs.S0F0: Returns the function of this message.
getFunction() - Method in class com.ergotech.secs.SecsMsg: Returns the SECSII Function for this message.
getFunction() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: This will return the function value.
getFunction() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the function of this message.
getGemCompliant() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the gem compliant.
getGEMConnectors() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Used when reloading in MIStudio.
getGemContainer() - Method in class com.ergotech.secs.gem.GemHandler
getGemEquipment(String) - Static method in class com.ergotech.secs.gem.GemEquipment: Return the GemEquipment for the name provided.
getGemEquipment() - Method in class com.ergotech.secs.gem.GemEquipment: This returns the GemEquipment.
getGemEquipmentFor(String) - Static method in class com.ergotech.secs.gem.GemEquipment: Return the GemEquipment for the name provided.
getGemHandler() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the gem handler, or null if we are not gem compliant.
getGoodConnector() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Search the sources for a connector with the inport GOOD_STATUS_NAME with a source of a VIBMessageBean and the outport GOOD_STATUS_NAME
getGpioPinName() - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
getGpioPinName() - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
getGpioPinName() - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
getGroupSize() - Method in class com.ergotech.vib.manipulators.spc.SPC: accesses the value of the group size
getGroupsURL() - Method in class com.ergotech.vib.manipulators.MixSecurityManager
getGUF() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The gap update factor.
getGWTLogger() - Static method in class com.ergotech.vib.servers.DataSource
getHandlerForDeviceId(int) - Static method in class com.ergotech.secs.ECControllerHandler: Give a standard way of getting a handler for a specific device id
getHandlerForPort(int) - Static method in class com.ergotech.secs.ERVoyeurHandler: Give a standard way of getting a handler for a specific device id
getHcack() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Used to determine if an autoresponse needs to be sent.
getHeader() - Method in class com.ergotech.secs.MHEAD: Returns the header (MHEAD) as an array of bytes.
getHeaderOffset() - Method in class com.ergotech.vib.servers.ppi.PPIServer
getHeaderSize() - Method in class com.ergotech.secs.HSMSSessionManager: Returns the headersize for HSMS messages.
getHeaderSize() - Method in interface com.ergotech.secs.MsgManager
getHeaderSize() - Method in class com.ergotech.secs.SecsISessionManager: Returns the headersize for HSMS messages.
getHeaderSize() - Method in class com.ergotech.secs.SessionManager: Get the header size for this port.
getHexString(byte) - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Convert the binary value to a hex string.
getHighestStationAddress() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The highest station address.
getHighValue() - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
getHost() - Method in class com.ergotech.vib.manipulators.Emailer: This is the SMTP Host name.
getHostLinkDeviceServers() - Static method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer
getHostMessageErrorLists() - Method in class com.ergotech.transsecs.secs.VIBMessageBean
getHostName() - Method in class com.ergotech.secs.HSMSActiveWrapper
getHostName() - Method in class com.ergotech.secs.HSMSSocketManager: Returns the host name.
getHostname() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Returns the hostname/ip address of the PLC.
getHostname() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Returns the hostname/ip address of the PLC.
getHostName() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getHostName() - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
getHostname() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Returns the hostname/ip address of the PLC.
getHSMSSocketListener(int) - Static method in class com.ergotech.secs.HSMSSocketListener: Returns a Socket Listener for the port provided.
getI() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for the integral parameter
getI2cAddress() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
getI2cAddress() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
getId() - Method in class com.ergotech.secs.ConnectionManager: Returns an ID for this connection.
getID() - Method in class com.ergotech.secs.gem.GemID: Returns the id of the object.
getId() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable
getId() - Method in class com.ergotech.secs.HSMSConnectionManager: Returns an ID for this connection.
getId() - Method in class com.ergotech.secs.SecsEvent: This will return the id of the events source.
getId() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns an ID for this connection.
getIgnoreAllTimeouts() - Static method in class com.ergotech.secs.SecsMsg: Returns the status of timeout handling.
getIgnoreTimeouts() - Method in class com.ergotech.secs.SecsMsg: Returns the status of timeout handling.
getImageSize() - Method in class com.ergotech.vib.servers.ab.ControlLogixAddressBlock: For this address block, the image size is just the number of servers.
getImageSize() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Returns the number of bytes in the current block.
getIncludeTimestamp() - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Returns the Include Timestamp flag
getIncomingValueObject() - Method in class com.ergotech.vib.servers.DataSource: Returns the value object from the last event or a bad quality "Not Triggered" if the component has not been triggered.
getIncrement() - Method in class com.ergotech.vib.servers.IncrementServer: Accesses the current value of increment.
getIncrementAmount() - Method in class com.ergotech.vib.manipulators.Counter: This gets the current increment value
getIndex() - Method in class com.ergotech.vib.manipulators.array.ArrayElementFilter: Returns the index.
getInetAddress() - Method in class com.ergotech.secs.HSMSSocketManager: Return the inet address of the client socket
getInitialLogger() - Static method in class com.ergotech.secs.HSMSSocketManager
getInitialQuality() - Method in class com.ergotech.vib.manipulators.Constant
getInPortNames() - Method in class com.ergotech.transsecs.secs.ConnectionConfig: For OPC we don't want to generate the "active" tags if this is a tool project.
getInPortNames() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: For OPC we don't want to generate the "active" tags if this is a tool project.
getInPortNames() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: For OPC we want to generate the "active" tags if this is a host project.
getInPortNames() - Method in class com.ergotech.vib.manipulators.Manipulator: This will return a Enumeration of Strings which are associated with an inport.
getInputRegister(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getInputRegisterCount() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getInputRegisterRange(int, int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getInputStream() - Method in class com.ergotech.vib.ports.Port: The input stream associated with this port.
getInScript() - Method in class com.ergotech.vib.servers.DataSource: Returns the local script.
getIntegerOnly() - Method in class com.ergotech.vib.servers.RandomData: Gets whether or not to generate only integer outputs
getIntegerOutput() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets whether or not to generate only non-decimal numbers in the array.
getInterCharacterTimeout() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: The inter-character timeout.
getInterCharacterTimeout() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: The inter-character timeout.
getIntValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.secs.SecsDataStructure
getIntValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getIntValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as an int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getIntValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a int.
getIntValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getIntValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the int value of the current value object.
getIntValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a int.
getIntValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as an integer.
getIntValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a int.
getIntValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a int.
getIntValue(int) - Method in class TransSECS.GemIDConnection: Get the current value of the VID as a long (which can be converted to a byte, short, or int if needed).
getIntValue() - Method in class TransSECS.Value
getIntYColumns() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets number of int value columns to generate
getIsEquipment() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns whether this instance is the equipment or the host.
getIsHost() - Method in class com.ergotech.secs.SecsIWrapper: Returns whether this connection is host or equipment.
getIsHost() - Method in class com.ergotech.secs.SessionManager: Returns true if this session manager is capable of sending host (primary) messages.
getJustification() - Method in class com.ergotech.secs.SecsFormat20: Get the justification of the formatted string.
getKey(SecsFormat3x5x, SecsFormat3x5x, String) - Static method in class com.ergotech.secs.gem.GemHandler
getKey() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
getLabel() - Method in class com.ergotech.vib.servers.MarqueeServer: This will return the current label without any characters switched.
getLastAccessTime() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
getLastConnector() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent
getLastDataFromPLC() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
getLastMessageSent() - Method in class com.ergotech.secs.gem.GemCEID: Returns the last event message that was sent with this CEID.
getLastSplitString() - Method in class com.ergotech.vib.manipulators.array.StringToArray
getLength() - Method in class com.ergotech.secs.SecsDataStructure
getLength() - Method in interface com.ergotech.secs.SecsFormat: Returns the length of the format.
getLength() - Method in class com.ergotech.secs.SecsFormat00: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat10
getLength() - Method in class com.ergotech.secs.SecsFormat11: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat20
getLength() - Method in class com.ergotech.secs.SecsFormat22
getLength() - Method in class com.ergotech.secs.SecsFormat30: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat31: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat32: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat34: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat40: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat44: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat50: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat51: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat52: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.secs.SecsFormat54: Returns the number of elements in the SecsFormat00.
getLength() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getLength() - Method in class com.ergotech.vib.servers.fins.FinsString: Returns the number of bytes that need to be read to satisfy this server.
getLength() - Method in class com.ergotech.vib.servers.melsec.MelsecString: Returns the number of bytes that need to be read to satisfy this server.
getLength() - Method in class com.ergotech.vib.servers.modbus.ModbusString: Returns the number of bytes that need to be read to satisfy this server.
getLength() - Method in class com.ergotech.vib.servers.modbus.ModbusStringArray: Returns the number of bytes that need to be read to satisfy this server.
getLength() - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Returns the length.
getLength() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the number of bytes that need to be read to satisfy this server.
getlevel() - Method in class com.ergotech.secs.SecsEvent
getLevel() - Method in class com.ergotech.vib.servers.FloatFluxServer: Returns the current level value.
getLimitAsSF(double) - Method in class com.ergotech.secs.gem.GemVID: Returns the upper limit as a SecsFormat.
getLimitId() - Method in class com.ergotech.secs.gem.GemLIMITID: Returns the limit id.
getLimitids() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot
getLimitMax() - Method in class com.ergotech.secs.gem.GemVID: Returns the Maximum acceptable value for a limit.
getLimitMaxAsSF() - Method in class com.ergotech.secs.gem.GemVID: Returns the upper limit as a SecsFormat.
getLimitMin() - Method in class com.ergotech.secs.gem.GemVID: Returns the minimum acceptable value for a limit.
getLimitMinAsSF() - Method in class com.ergotech.secs.gem.GemVID: Returns the lower limit as a SecsFormat.
getLimitName(String, long, long) - Static method in class com.ergotech.secs.gem.GemHandler
getLinkTestInterval() - Method in class com.ergotech.secs.HSMSWrapper: This value controls how often LinkTest messages are sent.
getLinkTestInterval() - Method in class com.ergotech.transsecs.secs.TransSecsController: The current link test interval for all HSMS connections
getLinkTimeout() - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns the link timeout in seconds.
getLinkTimeoutMilliseconds() - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns the link timeout in milliseconds.
getLocal() - Method in class com.ergotech.secs.gem.OnlineHandler: This will return if we consider ourselves in local state.
getLocalDebug() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the local debug level.
getLocale() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This method returns the Locale that this object was created in.
getLocale() - Method in class com.ergotech.vib.valueobjects.StringValueObject: This method returns the Locale that this object was created in.
getLocale() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This method returns the Locale that this object was created in.
getLocale() - Method in class com.ergotech.vib.valueobjects.ValueObject: This method returns the Locale that this object was created in.
getLocale() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This method returns the Locale that this object was created in.
getLog4jLogger() - Method in class com.ergotech.secs.gem.Log4JLogger
getLogger() - Method in class com.ergotech.secs.HSMSSocketListener: Returns the logger for this connection.
getLogger() - Method in class com.ergotech.secs.HSMSWrapper: Returns the current logger.
getLogger() - Method in class com.ergotech.secs.PortManager: Returns the current logger object.
getLogger() - Method in class com.ergotech.secs.SecsIWrapper: Returns the current logger.
getLogger() - Method in class com.ergotech.secs.SessionManager: Returns the current logger object.
getLogger() - Method in interface com.ergotech.secs.WrapperInterface: Returns the current logger.
getLogger() - Method in class com.ergotech.transsecs.secs.TransSecsController
getLogger(String) - Static method in class com.ergotech.transsecs.secs.VIBLogger: Returns a logger for the given equipment name.
getLoggerName() - Method in class com.ergotech.transsecs.secs.VIBLogger
getLogixEthernetDeviceServers() - Static method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer
getLogixTagName() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Returns the PLC address.
getLongValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.secs.SecsDataStructure
getLongValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getLongValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a long.
getLongValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getLongValue() - Method in class com.ergotech.vib.servers.DataSource: Returns the long value of the current value object.
getLongValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as a long.
getLongValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a long.
getLongValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a long.
getLongValue() - Method in class TransSECS.Value
getLowerDB() - Method in class com.ergotech.secs.gem.GemLIMITID: Returns the lower DB.
getLowestPrecisionValueObject(String) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Returns the lowest precision value object that the string can be converted to.
getLowValue() - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
getLSL() - Method in class com.ergotech.vib.manipulators.spc.SPC: accesses the value of the lower specification limit
getM() - Method in class com.ergotech.vib.manipulators.Scaler
getMainExpression() - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Returns the expected response.
getManualCommand() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for manual command
getMarkerChar() - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Returns the marker character.
getMatchingPrimary(SecsMsg) - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the VIBMessageBean matching the system bytes of the provided SecsMsg or null if there is no matching message.
getMatchingResponse(SecsMsg) - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns VIBMessageBean that represents the response to the SecsMsg provided or null if no response can be found.
getMax() - Method in class com.ergotech.vib.servers.RandomData: Accesses the current maximum value.
getMaxAge() - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
getMaxAmp() - Method in class com.ergotech.vib.servers.SineServer: Accesses the current maximum amplitude value.
getMaxFluctuation() - Method in class com.ergotech.vib.servers.FloatFluxServer: Returns the current maximum fluctuation level of the server.
getMaximum() - Method in class com.ergotech.vib.manipulators.Counter: This gets maximum limit
getMaximumBlockOffset() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Returns the message offset.
getMaximumBlockSize() - Method in class com.ergotech.secs.SecsISessionManager: Returns the maximum block size.
getMaximumBlockSize() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Returns the maximum allowable block size in bytes.
getMaximumCoilAddress() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Returns the maximum coil address.
getMaximumRegisterAddress() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Returns the maximum register address.
getMaximumSocketConnections() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
getMaximumSocketConnections() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
getMaximumSocketConnections() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer
getMaximumSocketConnections() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer
getMaximumSocketConnections() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer
getMaxNumValues() - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
getMaxPorts() - Method in class com.ergotech.vib.ports.PortPool: Returns the maximum number of ports that we will open to communicate with the device.
getMaxQueueSize() - Method in class com.ergotech.vib.manipulators.PassOnThread: Return the current maximum queue size.
getMaxTimebase() - Method in class com.ergotech.vib.manipulators.array.HistoricalTimebaseBridger
getMaxTimebase() - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
getMaxUnitId() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
getMaxValue() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets the maximum for the random number generator
getMaxValue() - Method in class com.ergotech.vib.servers.IncrementServer: Returns the maximum value the server can attain.
getMelsecDeviceServers() - Static method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
getMemoryAddress() - Method in class com.ergotech.vib.servers.fins.FinsServer
getMemoryAddress() - Method in class com.ergotech.vib.servers.melsec.MelsecServer
getMemoryAreaCode() - Method in class com.ergotech.vib.servers.fins.FinsServer
getMemoryAreaCode() - Method in class com.ergotech.vib.servers.ppi.PPIServer: Returns the memory area code.
getMessage() - Method in exception com.ergotech.transsecs.secs.ParseException: returns the description and the line number and character postion.
getMessage() - Method in exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Returns the message of the embedded exception if there is no message recorded in this exception.
getMessage() - Method in class com.ergotech.vib.manipulators.Emailer: This is a string thats added to each email message.
getMessage() - Method in exception com.ergotech.vib.servers.plc.PLCException: Returns the message stored with this exception or the message from the sub-exception.
getMessage(String) - Method in class TransSECS.GemIDConnection: Returns a message that can be sent from the interface.
getMessageBean(String) - Method in class com.ergotech.transsecs.secs.TransSecsController
getMessageHandlers() - Method in class com.ergotech.secs.HSMSSocketListener: Returns the Vector of message handlers.
getMessageHandlers() - Method in class com.ergotech.secs.SecsIWrapper: Return the vector of all the message handlers.
getMessageHandlers() - Method in class com.ergotech.secs.SessionManager: Returns the current message handlers.
getMessageHandlersForId(int) - Method in class com.ergotech.secs.PortManager: Get a message handler for a particular ID.
getMessageId() - Method in class com.ergotech.secs.SecsMsg: Returns the message ID.
getMessageName() - Method in class com.ergotech.transsecs.secs.MessageBean
getMin() - Method in class com.ergotech.vib.servers.RandomData: Accesses the current minimum value.
getMinimum() - Method in class com.ergotech.vib.manipulators.Counter: This gets the minimum
getMinPulseTime() - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
getMinValue() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets the minimum for the random number generator
getMinValue() - Method in class com.ergotech.vib.servers.IncrementServer: Returns the minimum value the server can attain.
getModbusDeviceServers() - Static method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase
getMode() - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
getMqttDeviceServer() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Return the device server.
getMsgId() - Method in class com.ergotech.secs.SecsMsg: This method returns a unique ID for this message.
getMultiBlockRequest() - Method in class com.ergotech.secs.S2F3: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S2F33: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S2F35: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S2F49: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S5F8: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F11: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F13: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F16: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F18: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F25: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F27: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F3: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S6F9: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.S7F3: This is the multiblock message we will send if we have auto-multiblock setup.
getMultiBlockRequest() - Method in class com.ergotech.secs.SecsMsg: This is called by send message for all messages that are multiblock.
getMultiLogger(String) - Static method in class com.ergotech.transsecs.secs.MultiLogger: Return the multi-loger for the given name, creating it if necessary .
getMultiplier() - Method in class com.ergotech.vib.manipulators.datetime.DateToLong: This allows the user to compensate for dates that do not start at Jan1 1970.
getMultiplier() - Method in class com.ergotech.vib.manipulators.datetime.LongToDate: This allows the user to compensate for dates that do not start at Jan1 1970.
getNACK() - Method in class com.ergotech.secs.SecsMsg: Returns a nack for this message (ie SxF0)
getName(int, long) - Static method in class com.ergotech.secs.gem.GemHandler: Returns a string created from the given type and id.
getName(String, String) - Static method in class com.ergotech.secs.gem.GemHandler: Returns a string created from the given type and id.
getName() - Method in class com.ergotech.secs.gem.GemID: Returns the name of the object.
getName() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable
getName() - Method in class com.ergotech.secs.SecsEvent: This will return the name of the SecsEvent.
getName() - Method in class com.ergotech.secs.SerialPortManager: Gets the name of this serial port on this computer.
getName() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: This will return the name.
getName() - Method in class com.ergotech.vib.ports.Port: Returns the name of this component.
getName() - Method in class com.ergotech.vib.ports.PortFactory
getName() - Method in interface com.ergotech.vib.ports.PortFactoryInterface: Returns the name of the factory.
getName() - Method in interface com.ergotech.vib.ports.PortInterface: This should return the name of the port (in a nice short form).
getName() - Method in class com.ergotech.vib.ports.PortPool: Returns the name of this port.
getName() - Method in interface com.ergotech.vib.ports.PortPoolInterface: This method returns the name associated with this port pool.
getName() - Method in class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool
getName() - Method in class com.ergotech.vib.servers.DataSource: Returns the data source name.
getName() - Method in class com.ergotech.vib.servers.SimpleDataSource
getNetworkNumber() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
getNewSessionManager() - Method in class com.ergotech.secs.ConnectionManager: Return a new session manager object.
getNewSessionManager() - Method in class com.ergotech.secs.HSMSConnectionManager: Return a new SessionManager object by calling the getNewSessionManager method of HSMSSessionManager.
getNewSessionManager() - Static method in class com.ergotech.secs.HSMSSessionManager: Return a new session manager object.
getNewSessionManager() - Method in class com.ergotech.secs.SecsIConnectionManager: Return a new SessionManager object by calling the getNewSessionManager method of SecsISessionManager.
getNewSessionManager() - Static method in class com.ergotech.secs.SecsISessionManager: Return a new session manager object.
getNewSessionManager() - Static method in class com.ergotech.secs.SessionManager: Return a new session manager object.
getNextDataId() - Method in class com.ergotech.secs.Event
getNodeAddress() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: The address of this node.
getNotifier(GemIDConnection, String) - Static method in class TransSECS.MessageReceiveNotifier: Return a MessageReceiveNotifier for the particular message on a given connection.
getNumberOfElements() - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: Returns the Number Of Elements.
getNumberOfGroups() - Method in class com.ergotech.vib.manipulators.spc.SPC: accesses the value of the number of containers
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsDataStructure: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in interface com.ergotech.secs.SecsFormat: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat00: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat10: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat11: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat20: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat22: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat30: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat31: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat32: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat34: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat40: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat44: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat50: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat51: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat52: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.secs.SecsFormat54: Returns the number of length bytes.
getNumberOfLengthBytes() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getNumericValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue(double, double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: This will return a random number between min and max.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value as a double.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as a double.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the double value, but will throw an exception if the object isn't convertible.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the double value, but will throw an exception if the object isn't convertable.
getNumericValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a double.
getNumericValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value as a double.
getNumericValue() - Method in class TransSECS.Value
getObjectValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as an Object.
getObjectValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value.
getObjectValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as an Object.
getOffset() - Method in class com.ergotech.vib.manipulators.datetime.DateToLong: This allows the user to compensate for dates that do not start at Jan1 1970.
getOffset() - Method in class com.ergotech.vib.manipulators.datetime.LongToDate: This allows the user to compensate for dates that do not start at Jan1 1970.
getOffset() - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Returns the offset.
getOffset() - Method in class com.ergotech.vib.servers.SineServer: Returns the amplitude offset of the server.
getOnline() - Method in class com.ergotech.secs.gem.OnlineHandler: Returns true if the state is one of the two online states.
getOnlineHandler() - Method in class com.ergotech.secs.gem.GemEquipment: This returns the Online Handler.
getOnlineHandler() - Method in class com.ergotech.secs.gem.GemHandler: Returns the gem handler.
getOnlineMode() - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This will return the current online mode.
getOnlineMode() - Method in class com.ergotech.secs.gem.GemHandler: This will return the current online mode.
getOnlyLetters() - Method in class com.ergotech.vib.servers.RandomStringServer: Gets whether or not to start the output with a Letter.
getOPCContainer() - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient: Returns the opcContainer creating it if necessary.
getOPCHostName() - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
getOPCServerName() - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
getOPCTimebase() - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
getOptimizeReads() - Method in class com.ergotech.vib.servers.plc.PLCServer: Optimize the reading of registers.
getOptionalLimit() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the optional limit.
getOrderBy() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the ORDER BY part of the SQL statement
getOriginalException() - Method in exception com.ergotech.vib.exceptions.VIBUpdateFailedException
getOutMax() - Method in class com.ergotech.vib.manipulators.spc.PidControl
getOutMin() - Method in class com.ergotech.vib.manipulators.spc.PidControl
getOutPortNames() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns a list of all the available outports.
getOutputStream() - Method in class com.ergotech.vib.ports.Port: The output stream associated with this port.
getP() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for the proprtional parameter
getPad() - Method in class com.ergotech.vib.manipulators.ConvertToHex: gets the flag whether or not to pad small numbers (numbers less than 0x10) with a zero.
getParent() - Method in class com.ergotech.vib.servers.DataSource
getParity() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the parity.
getParity() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the parity.
getParity() - Method in class com.ergotech.vib.ports.SerialWrapper: This is the parity.
getParity() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
getParity() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
getParity() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
getPassiveT1() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns the T1 for the passive connection.
getPassiveT1() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT2() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T2 for the passive connection.
getPassiveT2() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT3() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T3 for the passive connection.
getPassiveT3() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT4() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T4 for the passive connection.
getPassiveT4() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT5() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T5 for the passive connection.
getPassiveT5() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT6() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T6 for the passive connection.
getPassiveT6() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT7() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T7 for the passive connection.
getPassiveT7() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveT8() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns T8 for the passive connection.
getPassiveT8() - Method in class com.ergotech.transsecs.secs.TransSecsController
getPassiveToolTarget() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the tool that will be the target.
getPassword() - Method in class com.ergotech.vib.manipulators.Emailer
getPCAddress() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Returns the PC Address.
getPcNumber() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
getPDURef() - Method in class com.ergotech.vib.servers.ppi.PPIServer: The synchronized accessor for the PDF REF.
getPeepOnly() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: To take a look at the data in a message and then pass it on to the host without handling it set snoop only.
getPersistenceFileName() - Method in class com.ergotech.secs.gem.GemEquipment
getPersistenceFileName() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns the filename to used for persistence.
getPersistenceFileName() - Method in class com.ergotech.transsecs.secs.TransSecsController: Return the file name for GEM persistance.
getPersistenceInterface() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Return the persistance config.
getPersistentConfig(String) - Static method in class com.ergotech.transsecs.secs.MqttPersistentConfig
getPersistentConfig(String) - Static method in class com.ergotech.transsecs.secs.RestPersistentConfig
getPersistentServers() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Return servers that should be edited in a tree.
getPLCAddressBlock() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the address block for this server.
getPLCPrivateAddress() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: The PLC private IP address or hostname.
getPLCPrivateAddress() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: The PLC private IP address or hostname.
getPLCPrivateAddress() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: The PLC private IP address or hostname.
getPlcStationNumber() - Method in class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Return the station number.
getPLCStationNumber() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns theplcStationNumber.
getPopupLogger() - Static method in class com.ergotech.vib.servers.DataSource
getPort() - Method in class com.ergotech.secs.HSMSSocketListener: Returns the port that we are listening on.
getPort() - Method in class com.ergotech.secs.HSMSSocketManager: Gets the port for the server to listen on.
getPort() - Method in class com.ergotech.secs.HSMSWrapper: Returns the current TCP/IP port.
getPort() - Method in class com.ergotech.secs.PortManager: Returns the port.
getPort() - Method in class com.ergotech.secs.SecsIWrapper
getPort() - Method in class com.ergotech.secs.SerialPortManager: Gets the port value of the server.
getPort() - Method in interface com.ergotech.secs.WrapperInterface: Returns the current TCP/IP port.
getPort() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Returns the passive port.
getPort() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns the port that this object will use to listen for active connections.
getPort() - Method in class com.ergotech.vib.manipulators.Emailer: Returns the SMTP port;
getPort() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the port number.
getPort() - Method in class com.ergotech.vib.ports.Port: This is the port number.
getPort() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the port number.
getPort() - Method in class com.ergotech.vib.ports.SerialWrapper: This is the port number.
getPort() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Returns the current port.
getPort() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer: Returns the serial port number.
getPortManager() - Method in class com.ergotech.secs.ConnectionManager: returns the port manager
getPortManager() - Method in class com.ergotech.secs.HSMSWrapper: Returns the port manager for the wrapper.
getPortManager() - Method in class com.ergotech.secs.SecsIWrapper: Returns the port manager for the wrapper.
getPortManager(boolean) - Method in class com.ergotech.secs.SecsIWrapper: Returns the port manager for the wrapper.
getPortManager() - Method in class com.ergotech.secs.SessionManager: This will return the port manager for this session
getPortManager() - Method in interface com.ergotech.secs.WrapperInterface: Returns the port manager for the wrapper.
getPortManager() - Static method in class com.ergotech.vib.ports.PortFactoryManager: This will return the singleton port manager.
getPortManagerForId(int, String) - Static method in class com.ergotech.secs.PortManager: Returns a connection manager for the provided ID.
getPortManagers() - Static method in class com.ergotech.secs.PortManager: Returns the current vector of port managers.
getPortNumber() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Returns the PLC port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Returns the serial port number.
getPortNumber() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Returns the PLC port number.
getPortPool() - Method in class com.ergotech.vib.ports.Port: Returns the port pool that this port was served from.
getPortPool(String, Object) - Method in class com.ergotech.vib.ports.PortFactory: Calling this methods indicates that a component is interested in this factory and will (presumably) be calling "checkin/checkout" at some later date to get access to the underlying resource.
getPortPool(String, Object) - Method in interface com.ergotech.vib.ports.PortFactoryInterface: Returns a pool for a particular port.
getPortPool() - Method in interface com.ergotech.vib.ports.PortInterface: Returns the port pool that this port was served from.
getPostString() - Method in class com.ergotech.vib.manipulators.string.CodeToString: Returns that string that is postpended to all output.
getPPIDeviceServers() - Static method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase
getPPIDList() - Method in class com.ergotech.transsecs.secs.FileRecipeManager: This will return a list of PPIDs as a SecsFormt00.
getPrefix() - Method in class com.ergotech.vib.manipulators.ConvertToHex: gets the String to display before the hex conversion.
getPreString() - Method in class com.ergotech.vib.manipulators.string.CodeToString: Returns that string that is prepended to all output.
getPrimaryMessage() - Method in class com.ergotech.secs.SecsMsg: This method will returns the original message.
getPrivateField(Class, String) - Static method in class com.ergotech.transsecs.secs.PublishBean
getProperties() - Method in class com.ergotech.vib.valueobjects.ValueObject: Return a copy of the properties map.
getProperty(String) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is additional information that is sent with the property.
getProperty(String) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is additional information that is sent with the property.
getPublishedAccessorContainer() - Method in class com.ergotech.transsecs.secs.PublishBean: Create the container with the name
getPublishedAccessorContainer() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the container with the name of our controller.
getPullFromServers() - Method in class com.ergotech.vib.servers.SimpleDataSource
getPushData() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the name of the server we will push to.
getPushName() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the name of the server we will push to.
getPushToServers() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the name of the server we will push to.
getPwmType() - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
getQuality() - Method in class com.ergotech.vib.manipulators.PropertyFilter: Get the quality value for out-going valueObjects.
getQuality() - Method in exception com.ergotech.vib.servers.plc.PLCException: Returns the quality of the data.
getQuality() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the quality of the reading.
getQuality() - Method in class com.ergotech.vib.valueobjects.ValueObject: This is the quality of the reading.
getQuality() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the quality of the reading.
getQuality() - Method in class TransSECS.Value
getQualityString(int) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Returns a descriptive string for the given quality.
getRandomX() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets whether or not to use random or seqencial X values.
getRate() - Method in class com.ergotech.vib.servers.FloatFluxServer: Returns the Rate of change value.
getRawPacket() - Method in class com.ergotech.vib.ports.UDPPassiveSocket: Returns the raw datagram packet.
getRawSessionManager(int) - Method in class com.ergotech.secs.HSMSWrapper: Get a session manager for the provided deviceID.
getRawSessionManager(int) - Method in class com.ergotech.secs.SecsIWrapper: Get a session manager for the provided deviceID.
getRawSessionManager(int) - Method in class com.ergotech.secs.TerminalServerWrapper: Get a session manager for the provided deviceID.
getRawSocket() - Method in class com.ergotech.vib.ports.UDPPassiveSocket: Returns the raw socket.
getRCPPARNM() - Method in class com.ergotech.secs.RCPPAIR
getRCPPARVAL() - Method in class com.ergotech.secs.RCPPAIR
getReadResponse(PPIDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget: Returns a PPIDataBlock that can be used to form the read response.
getReceiveBufferSize() - Method in class com.ergotech.vib.ports.UDPSocket: Returns the receiveBufferSize for the current socket.
getReceivedBytes() - Method in class com.ergotech.transsecs.secs.VIBLogger
getReceivedMsg() - Method in class com.ergotech.transsecs.secs.VIBLogger
getReg() - Method in class com.ergotech.vib.servers.modbus.Modbus0XServer: Gets the registerNumber of the server.
getReg() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Gets the registerNumber of the server.
getReg() - Method in class com.ergotech.vib.servers.plc.PLCArray: Returns the starting register.
getReg() - Method in class com.ergotech.vib.servers.ppi.PPIServer: Returns the register address in the PLC.
getRegister(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getRegister() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
getRegister() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
getRegisterBlock(String, int, int) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method returns a register block (byte[]) that is the correct type and at least large enough to read or write the simulated registers.
getRegisterBlockLocal(String, int, int) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method returns a register block (byte[]) that is the correct type and at least large enough to read or write the simulated registers.
getRegisterBlockShared(String, int, int) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method returns a register block (byte[]) that is the correct type and at least large enough to read or write the simulated registers.
getRegisterCount() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getRegisterCount() - Method in class com.ergotech.vib.servers.plc.PLCArray: Returns the register count.
getRegisterRange(int, int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getRegisterType() - Method in class com.ergotech.vib.servers.modbus.ModbusArray: Returns the type of this register.
getRegisterType() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Returns the register type for this server.
getRegNotifyMax() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getRegNotifyMax() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
getRegNotifyMin() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getRegNotifyMin() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
getReplaceString() - Method in class com.ergotech.vib.manipulators.string.TokenReplace: Returns the String to replace the tokens.
getReplyBit() - Method in class com.ergotech.secs.SecsMsg: Returns the value of replyBit.
getReplyTimeout() - Method in class com.ergotech.secs.SessionManager: Returns the T3 timeout.
getReportGroupSize() - Method in class com.ergotech.secs.gem.TraceServer: The number of samples to take before a report is sent.
getReportValues(GemRPTID, ValueObjectInterface, boolean) - Method in class com.ergotech.secs.gem.GemHandler: Creates the list of values for the report given.
getResourceBundle(Object, String) - Static method in class com.ergotech.vib.utils.Utils: Returns a resource bundle using the owners class loader.
getResourceBundle(Class, String) - Static method in class com.ergotech.vib.utils.Utils: Returns a resource bundle using the owners class loader.
getResourceBundle(ClassLoader, String) - Static method in class com.ergotech.vib.utils.Utils: Returns a resource bundle using the owners class loader.
getResourceName() - Method in class com.ergotech.vib.manipulators.string.CodeToString: Returns the resource file applicationName
getResponse(SecsMsg) - Method in class com.ergotech.transsecs.secs.FileRecipeManager: This method handles S7F3 (Process Program Send), S7F5 (Process Program Request), S7F17 (Process Program Delete), and S7F19 (Current EPPD Request).
getResponse() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Returns the response message.
getResponse(String) - Static method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the response message by string
getResponse() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the response message by string
getResponse() - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the response.
getResponseConnector() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Search the sources for a connector with the inport RESPONSE_RECEIVED with a source of a VIBMessageBean and the outport RESPONSE_STATUS_NAME
getResponseLength() - Method in class com.ergotech.vib.servers.modbus.ModbusDataBlock: Returns the length of the response or the offset of the length byte.
getResponseMessage() - Method in class com.ergotech.secs.SecsMsg: This method will returns the original message.
getResponseMessage() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the response message by string.
getResponseMessageName() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the response message by string.
getResponseTimeout() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: The response timeout.
getResponseTimeout() - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns the response timeout for this connection .
getResponseTimeout() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: The response timeout.
getRestContainer() - Method in class com.ergotech.vib.servers.rest.RestWrapper
getRestReadContainer() - Method in class com.ergotech.vib.servers.rest.RestWrapper
getRestServiceManager() - Method in class com.ergotech.vib.servers.rest.RestWrapper: Return the device server.
getRestWriteContainer() - Method in class com.ergotech.vib.servers.rest.RestWrapper
getRetryCount() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getRetryCount() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
getRetryCount() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getRetryCount() - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
getRetryCount() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: The retry count.
getRetryInterval() - Method in class com.ergotech.secs.HSMSActiveWrapper: The time, in seconds, between attempts to establish a connection.
getRetryLimit() - Method in class com.ergotech.secs.SecsIConnectionManager
getRetryLimit() - Method in class com.ergotech.secs.SecsIWrapper: Returns the retry limit.
getRow(int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return a Vector of values for the given row.
getRowCount() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the number of rows.
getRows() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the number of rows to be generated
getRPTID(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Return a variable associated with the provided rptid, or null if the rptid is unknown.
getRptids() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot
getRptidSecsFormat() - Method in class com.ergotech.secs.gem.GemHostModel
getRuntimeResource(Object, String) - Static method in class com.ergotech.vib.utils.Utils
getScript() - Method in class com.ergotech.vib.servers.DataSource: Returns the local script.
getSecsFormat(Object) - Static method in class com.ergotech.secs.gem.GemHandler: This utility method will find the best container (SecsFormatxx) for a given value.
getSecsFormat(double, int) - Static method in class com.ergotech.secs.gem.GemHandler: This utility method will find the best container (SecsFormatxx) for a given value.
getSecsFormat() - Method in class com.ergotech.secs.gem.GemVID: Returns the current value of this object as a SecsFormat.
getSecsFormat() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: This will return the SecsFormat.
getSecsFormattedData() - Method in class com.ergotech.secs.CarrierSlotData: Provides Data in SecsFormat form.
getSecsFormattedData() - Method in class com.ergotech.secs.CPNAMEVALPAIR
getSecsFormattedData() - Method in class com.ergotech.secs.ERRPAIR
getSecsFormattedData() - Method in class com.ergotech.secs.RCPPAIR
GetSecsFormattedData() - Method in class com.ergotech.secs.VidVPair
getSecsMsg() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Returns the Secs Message.
getSecsMsg() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: returns the raw secs message associated with this object.
getSelectColumnList() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the comma separated column list for the SELECT.
getSelectResponse() - Method in class com.ergotech.secs.HSMSSessionManager: returns the select response.
getSendColors() - Method in class com.ergotech.vib.servers.DataSource: This will tell the system whether or not to send the color with a value change if the new value is in a hihi, hi, lo, or lolo state.
getSendDate() - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the date.
getSendOnPropertyChange() - Method in class com.ergotech.vib.manipulators.PropertyFilter: Get whether or not to send a new ValueObject every time the quality, color, or timestamp of the data is changed.
getSendProperties() - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the values properties.
getSendTag() - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the tag name.
getSendValue() - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the values.
getSentBytes() - Method in class com.ergotech.transsecs.secs.VIBLogger
getSentMsg() - Method in class com.ergotech.transsecs.secs.VIBLogger
getServer() - Static method in class com.ergotech.vib.servers.rest.RestWrapper: Return the REST server.
getServerContainer() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator
getServerFor(int, long) - Method in class com.ergotech.secs.gem.GemHandler: Returns a GemID server associated with the given id and type.
getServerForName(String) - Method in class com.ergotech.secs.gem.GemHandler: This method will return a sever that is managed by GEM and which matches the name provided.
getServerListData() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the name of the server we will push to.
getServers() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Return the list of servers that need to be persisted.
getServersInternal() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Return a list of all servers.
getSessionHandle() - Method in class com.ergotech.vib.servers.ab.PCCCRegisteredSocket: Returns the session handle for this connection.
getSessionId() - Method in class com.ergotech.secs.HSMSSessionManager: Returns the session ID.
getSessionId(byte[]) - Static method in class com.ergotech.secs.HSMSSessionManager: Returns the session ID from the byte stream provide.
getSessionId(byte[]) - Static method in class com.ergotech.secs.SecsISessionManager: Returns the session ID from the byte stream provide.
getSessionManager(int) - Method in class com.ergotech.secs.ConnectionManager: This will return the SessionManager object for a specific sessionId or it will return the general session SessionManager if on exists.
getSessionManager(int) - Method in class com.ergotech.secs.HSMSPassiveWrapper: Get a session manager for the provided deviceID.
getSessionManager(int, String, int, int, boolean) - Static method in class com.ergotech.secs.HSMSSessionManager: Returns the session for the given port host and string.
getSessionManager(int, String, int, int, boolean, LoggerInterface) - Static method in class com.ergotech.secs.HSMSSessionManager: Returns the session for the given port host and string.
getSessionManager(int) - Method in class com.ergotech.secs.HSMSSocketListener: This will return a session manager for the give id, if we spawned it.
getSessionManager() - Method in class com.ergotech.secs.HSMSWrapper: This will return the SessionManager if one exists.
getSessionManager(int) - Method in class com.ergotech.secs.HSMSWrapper: Get a session manager for the provided deviceID.
getSessionManager(int, int, int, boolean) - Static method in class com.ergotech.secs.SecsISessionManager: Returns the session for the given port host and string.
getSessionManager(int, String, int, int, boolean, LoggerInterface) - Static method in class com.ergotech.secs.SecsISessionManager: Returns the session for the given port host and string.
getSessionManager() - Method in class com.ergotech.secs.SecsIWrapper: This will return the current SessionManager if one exists.
getSessionManager(int) - Method in class com.ergotech.secs.SecsIWrapper: Get a session manager for the provided deviceID.
getSessionManager() - Method in class com.ergotech.secs.SecsMsg: Returns the current session manager.
getSessionManager(int, String, int, int, boolean, Class) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given port host and string.
getSessionManager(int, String, int, int, boolean, Class, LoggerInterface) - Static method in class com.ergotech.secs.SessionManager: Returns the session for the given port host and string.
getSessionManager() - Method in class com.ergotech.secs.TerminalServerWrapper: This will return the current SessionManager if one exists.
getSessionManager(int) - Method in interface com.ergotech.secs.WrapperInterface: return the session manager for the provided device id.
getSessionManager() - Method in interface com.ergotech.secs.WrapperInterface: This will return the session manager if one exists.
getSessionManagers() - Method in class com.ergotech.secs.ConnectionManager: This will return the all the session managers.
getSessionManagers() - Method in interface com.ergotech.secs.ConnectionManagerInterface
getSetCEID() - Method in class com.ergotech.secs.gem.GemALID: Returns the CEID to send when the alarm is set.
getSetValue() - Method in class com.ergotech.vib.manipulators.SetValue: This will return the value that we are sending to the listeners when we receive a valuechangedevent.
getShortValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.secs.SecsDataStructure
getShortValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getShortValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the first element of array as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a long.
getShortValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data converted to a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data converted to a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat30: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat31: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat32: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat34: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat40: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat44: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat50: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat51: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat52: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.secs.SecsFormat54: Returns the value of the data as a short.
getShortValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getShortValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as a short.
getShortValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a short.
getShortValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a short.
getShortValue() - Method in class TransSECS.Value
getShouldSendMultiBlockRequests() - Static method in class com.ergotech.secs.SecsMsg: Returns the shouldSendMultiBlockRequests variable.
getSigned() - Method in class com.ergotech.vib.servers.plc.PLCServer: Values will be signed if this is true.
getSize() - Method in class com.ergotech.vib.servers.ab.ControlLogixArrayServer
getSLOTIDArray() - Method in class com.ergotech.secs.CarrierSlotData
getSocket() - Method in class com.ergotech.vib.ports.TCPPassiveSocket
getSocketManager() - Method in class com.ergotech.secs.HSMSPassiveWrapper: Returns the socket manager for the current parameters.
getSoundFile() - Method in class com.ergotech.vib.manipulators.SoundClipPlayer
getSource() - Method in class com.ergotech.secs.SecsEvent: This will return the TagAgent of the events source.
getSourceNetworkAddress() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getSourceNodeNumber() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getSourcePort() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
getSources() - Method in class com.ergotech.vib.servers.DataSource
getSP() - Method in class com.ergotech.vib.manipulators.spc.PidControl: accesses the value for the set point
getSpacing() - Method in class com.ergotech.secs.LinkTest: Returns the current spacing between messages in seconds.
getSpeed() - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
getSpoolHandler(String) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: Returns the persistent instance of the spool handler or null if one has not been created for the provided equipment name.
getSpoolHandler(String, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: Returns the persistent instance of the spool handler.
getSpoolHandler(String, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x, boolean) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: Returns the persistent instance of the spool handler.
getStartDate() - Method in class com.ergotech.vib.valueobjects.HistoricalValueObject: This is the starting date used for finding the range of values.
getStartExpression() - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Returns the expected start of the response.
getStartingDate() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject
getStartLevel() - Method in class com.ergotech.vib.servers.FloatFluxServer: Returns the default starting level of this server, which defaults to 0.
getStartReg() - Method in class com.ergotech.vib.servers.plc.PLCArray: Returns the starting register (an integer, or -1 if it has not been set).
getStartRemove() - Method in class com.ergotech.vib.manipulators.string.StringTrimmer: Returns the start remove value.
getStartTime() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the start time for the WHERE
getStartValue() - Method in class com.ergotech.vib.manipulators.Counter: This gets the value that is set when the Counter starts
getStartWithLetter() - Method in class com.ergotech.vib.servers.RandomStringServer: Gets whether or not to start the output with a Letter.
getStaticLocationFor(String) - Method in class com.ergotech.secs.gem.GemCEID: Add the "Trigger" input.
getStaticLocationFor(String) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This is used by the staticMethodEvent.
getStaticLocationFor(String) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.array.ArrayBuilder: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Check for "ArrayInput" otherwise pass through to super.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.ByteBuilder: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.Counter: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.DataValve: This is used by the StaticMethodEvent.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.Divide: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is used for StaticMethodListener interface.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.Manipulator: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.MasterCalculator: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.MasterComparer: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.MixSecurityManager: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.SetValue: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.SoundClipPlayer: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.string.CombineStrings: This is used by the staticMethodEvent.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.Subtract: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.URLReader: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.manipulators.UserFileReader: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Returns 3 for hostname and 4 for portnumber.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Returns 3 for hostname and 4 for portnumber.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Returns 3 for hostname and 4 for portnumber.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.DataSource.Writable: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.modbus.ModbusPresetSingleRegisterServer: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Returns 3 for hostname and 4 for portnumber.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Returns 3 for hostname and 4 for portnumber.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.plc.PLCArray: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.plc.PLCServer: This is used by the StaticMethodEvent to determine which valueChanged method to call.
getStaticLocationFor(String) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: This is the default getStaticLocationFor with a location used by the staticmethodevent to find a specific entry value object.
getStationAddress() - Method in class com.ergotech.vib.servers.plc.PLCArray: Returns the station address.
getStationAddress() - Method in class com.ergotech.vib.servers.plc.PLCServer: The destination address for this server.
getStatus() - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the status.
getStopBits() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the stop bits.
getStopBits() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the stop bits.
getStopBits() - Method in class com.ergotech.vib.ports.SerialWrapper: This is the stop bits.
getStopBits() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
getStopBits() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
getStopBits() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
getStream() - Method in class com.ergotech.secs.S0F0: Returns the stream number of this message.
getStream() - Method in class com.ergotech.secs.SecsMsg: Returns the SECSII Stream for this message.
getStream() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: This will return the stream value.
getStream() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Returns the stream of this message.
getStringLength() - Method in class com.ergotech.vib.servers.RandomStringServer: gets the number of characters in the output String
getStringValue() - Method in class com.ergotech.secs.gem.SecsFormatValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.secs.SecsDataStructure
getStringValue() - Method in interface com.ergotech.secs.SecsFormat: Returns the value of the format as a string.
getStringValue() - Method in class com.ergotech.secs.SecsFormat00: This method is required by the interface and has no meaning to the list.
getStringValue() - Method in class com.ergotech.secs.SecsFormat10: Returns the string representation of the object.
getStringValue() - Method in class com.ergotech.secs.SecsFormat11: Returns the current value as a string.
getStringValue() - Method in class com.ergotech.secs.SecsFormat20: Returns the data as a string.
getStringValue() - Method in class com.ergotech.secs.SecsFormat22: Returns the data as a string.
getStringValue() - Method in class com.ergotech.secs.SecsFormat30: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat31: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat32: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat34: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat40: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat44: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat50: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat51: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat52: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.secs.SecsFormat54: Returns a string representation of the value.
getStringValue() - Method in class com.ergotech.transsecs.secs.SecsFormat99
getStringValue() - Method in class com.ergotech.vib.servers.DataSource: Sets the string value of the current value object.
getStringValue(DataSource) - Method in class com.ergotech.vib.servers.MarqueeDeviceServer: This method will find the string associated with a dataSource, rotate it one character and return the value.
getStringValue() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource
getStringValue() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This will return the current value of the ValueObject as a String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.GenericValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.LongValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.StringValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the current value represented as an String.
getStringValue() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value as a String.
getStringValue() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the current value of the ValueObject as a String.
getStringValue(int) - Method in class TransSECS.GemIDConnection: Get the current value of the VID as a String.
getStringValue() - Method in class TransSECS.Value
getStringYColumns() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets number of int value columns to generate
getStructure() - Method in class com.ergotech.secs.S100F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F105: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F31: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F32: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S100F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S10F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F12: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F19: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F20: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F21: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F22: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F23: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F24: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F25: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F26: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F27: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F28: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F29: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F30: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F31: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F32: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F33: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F34: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F35: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F36: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F37: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F38: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F39: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F40: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F41: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F42: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F43: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F44: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F45: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F46: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F47: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F48: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S15F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F12: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F19: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F20: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F6
getStructure() - Method in class com.ergotech.secs.S1F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S1F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F12: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F19: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F20: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F21: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F22: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F23: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F24: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F25: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F26: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F27: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F28: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F29: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F30: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F31: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F32: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F33: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F34: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F35: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F36: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F37: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F38: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F39: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F40: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F41: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F42: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F43: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F44: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F45: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F46: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F47: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F48: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F49: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F50: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S2F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S5F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F12: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F19: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F20: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F21: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F22: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F23: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F24: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F25: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F26: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F27: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F28: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F29: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F30: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S6F99: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F10: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F12: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F14: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F15: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F16: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F17: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F18: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F19: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F2: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F20: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F4: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F6: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F8: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S7F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S99F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F0: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F1: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F11: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F13: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F3: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F5: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F7: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.S9F9: Returns the required data types for this message.
getStructure() - Method in class com.ergotech.secs.SecsMsg: Returns an array of objects representing the required structure for the message.
getStyle() - Method in class com.ergotech.vib.servers.TimeServer: returns the data formatter
getSubElement() - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the element.
getSubId() - Method in class com.ergotech.secs.SecsEvent: This is the subId.
getSubject() - Method in class com.ergotech.vib.manipulators.Emailer: This is the subject line to send.
getSupervisors() - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
getSVIDs(EquipmentData, EditorPanel, VIDsData, SessionManager) - Static method in class com.ergotech.transsecs.secs.Characterization: This method will attempt to get as much information as possible about a tool.
getSVName() - Method in class com.ergotech.secs.gem.GemVID: This is used for S1F12 only.
getSVs(S1F3) - Method in class com.ergotech.secs.Event
getSwapStyle() - Method in class com.ergotech.vib.servers.modbus.ModbusArray: This returns the 32 bit swap style.
getSwapStyle() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: This returns the 32 bit swap style.
getSwapStyle() - Method in class com.ergotech.vib.servers.plc.PLCServer: This returns the 32 bit swap style.
getSyncWriteTimeout() - Method in class com.ergotech.vib.servers.DataSource: gets the syncWriteTimeout
getSystemBytes() - Method in class com.ergotech.secs.SecsMsg: Returns the system bytes.
getT1() - Method in class com.ergotech.secs.SecsIConnectionManager
getT1() - Method in class com.ergotech.secs.SecsIWrapper: Returns the T1 timeout value.
getT1_IntercharacterTimeout() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns the Intercharacter Timeout as defined by the Semi SECSI specification.
getT2() - Method in class com.ergotech.secs.SecsIConnectionManager
getT2() - Method in class com.ergotech.secs.SecsIWrapper: Returns the T2 timeout value.
getT2_ProtocolTimeout() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns the Protocol Timeout as defined by the Semi SECSI specification.
getT3() - Method in class com.ergotech.secs.HSMSWrapper
getT3() - Method in class com.ergotech.secs.SecsIWrapper: Returns the T3 timeout value.
getT3() - Method in interface com.ergotech.secs.WrapperInterface: Returns the reply timeout.
getT4() - Method in class com.ergotech.secs.SecsIConnectionManager
getT4() - Method in class com.ergotech.secs.SecsIWrapper: Returns the T4 timeout value.
getT4_InterblockTimeout() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns the Interblock Timeout as defined by the Semi SECSI specification.
getT5() - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T5 timeout.
getT5() - Method in class com.ergotech.secs.HSMSWrapper
getT6() - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T6 timeout.
getT6() - Method in class com.ergotech.secs.HSMSWrapper
getT7() - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T7 timeout.
getT7() - Method in class com.ergotech.secs.HSMSWrapper
getT8() - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T8 timeout.
getT8() - Method in class com.ergotech.secs.HSMSWrapper
getTableName() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the table name.
getTags() - Method in class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Return the list of tags that are to be read.
getTarget(String) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Returns a valid target for the given source address creating one if necessary.
getTemplate() - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Returns the template.
getThreadingModel() - Static method in class com.ergotech.secs.SessionManager: Retur the current threading model.
getTime() - Method in class com.ergotech.vib.valueobjects.ValueObject: this will return the date as a double ((double)date.getTime())/1000
getTime() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the time the value was created.
getTimebase() - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: Returns the number of milliseconds between timeout checks.
getTimebase() - Method in class com.ergotech.vib.manipulators.Blinker: This is subclassed to make sure we use we don't use a normal timer...
getTimebase() - Method in class com.ergotech.vib.servers.SimpleDataSource: Accesses the timebase of the server.
getTimeColumnName() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Returns the "HAS_TIME" property of the value object.
getTimeDelay() - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: Returns the current timeDelay factor
getTimedPopupLogger() - Static method in class com.ergotech.vib.servers.DataSource
getTimeInterval() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the time interval for the X column.
getTimeMillis() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the number of milliseconds since Jan 1st 1970.
getTimeMillis() - Method in class com.ergotech.vib.valueobjects.ValueObject: This will return the number of milliseconds since Jan 1st 1970.
getTimeMillis() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will return the number of milliseconds since Jan 1st 1970.
getTimeMillis() - Method in class TransSECS.Value
getTimeOffset() - Method in class com.ergotech.vib.manipulators.PropertyFilter: Get the timeOffset to be applied to the timestamp of the out-going ValueObject.
getTimeOffset() - Method in class com.ergotech.vib.servers.SineServer: Returns the time offset of the SineServer (in seconds).
getTimeout() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
getTimer() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock
getTimeSpacing() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets the time interval for the timestamp of the data generated.
getTimeStamp() - Method in class com.ergotech.secs.SecsMsg: Returns the time stamp of the current message.
getTimestamp() - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the timestamp.
getTimestampColumn() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Returns the name of the timestamp column in the table.
getTimestampDateFormat() - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder
getTimestampedValues() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: This will return a generated timestamped TwoDimensionalValueObject.
getTimestampFormat() - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Returns the timestamp format.
getTimestampKey() - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder
getTimeZone() - Method in class com.ergotech.vib.servers.TimeServer: Current time zone as a string.
getTo() - Method in class com.ergotech.vib.manipulators.Emailer: This is the address to send to.
getToken() - Method in class com.ergotech.vib.manipulators.string.TokenReplace: Returns the token.
getToolName() - Method in class com.ergotech.transsecs.secs.MessageBean
getTotalLength() - Method in class com.ergotech.secs.SecsMsg: This will return the total length of the message when it sent.
getTotalSamples() - Method in class com.ergotech.secs.gem.TraceServer: The total number of samples to take.
getTrace() - Method in class com.ergotech.vib.servers.SimpleDataSource: Returns the trace flag.
getTraceLogger() - Static method in class com.ergotech.vib.servers.DataSource
getTransactionNumber() - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Returns a unique transaction number.
getTransactionNumber() - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Returns a unique transaction number.
getTransactionNumber() - Static method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Returns a unique transaction number.
getTransSecsController() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig
getTransSecsVoyeur() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Returns a TransSecsVoyeur object.
getTriggerEdge() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: The edge that will trigger the message to be sent.
getTrueString() - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This returns a comma separated list of all the possible strings that represent true.
getTsapDst() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getTsapDstRef() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getTsapSourceReference() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getTsapSrc() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getTsapSrcRef() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
getTTL() - Method in class com.ergotech.vib.valueobjects.ValueObject
getTTL() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface
getType(SecsFormat) - Static method in class com.ergotech.secs.gem.GemHandler: This will only work with the standard SecsFormat20, SecsFormat30, ect (the ones in the com.ergotech.secs package).
getType() - Method in class com.ergotech.vib.manipulators.Constant
getType() - Method in class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Returns the type of the datapoint.
getType() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the type of data that the current value was last set by.
getType() - Method in class com.ergotech.vib.valueobjects.ValueObject: Returns a 'C','Z', 'B', 'I', 'F', 'J', 'S', 'D', 'L', or 's' depending on if the currentValue was set as a char, boolean, byte, int, float, long, short, double, serializable object, or a string.
getType() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Returns the type that the was used to create the valueObject.
getType() - Method in class TransSECS.Value
getUnconvertedMsg() - Method in class com.ergotech.secs.SecsMsg: Returns the the raw, unconverted msg.
getUnhandledPrimaries() - Method in class com.ergotech.transsecs.secs.TransSecsController
getUnicodeOffset() - Method in class com.ergotech.vib.manipulators.string.StringSplitter: Returns the unicode offset.
getUnitId() - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
getUnits() - Method in class com.ergotech.secs.gem.GemVID: Returns the name of the units.
getUnrecoverableErrorHandler() - Static method in class com.ergotech.secs.SecsMsg: Returns the current unrecoverable error handler.
getUpperDB() - Method in class com.ergotech.secs.gem.GemLIMITID: Returns the upper DB.
getUrl() - Method in class com.ergotech.vib.manipulators.URLReader
getUserName() - Method in class com.ergotech.vib.manipulators.Emailer
getUserObject() - Method in class com.ergotech.secs.SecsEvent: This is a object passed in by the creator of the event.
getUsers() - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
getUsersURL() - Method in class com.ergotech.vib.manipulators.MixSecurityManager
getUseTimestamps() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: gets whether or not we are using a timestamped 2DVO
getUseTransactionIds() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase: Returns true if we are using transaction ids.
getUSL() - Method in class com.ergotech.vib.manipulators.spc.SPC: accesses the value of the upper specification limit
getV(int, VID) - Method in class com.ergotech.secs.Event
GetV() - Method in class com.ergotech.secs.VidVPair
getValidator() - Method in class com.ergotech.secs.gem.GemECID: Returns the validator.
getValue(SecsFormat) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This allows the equipment to poll the value of any VID.
getValue(SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to poll the value of any VID.
getValue(int) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to poll the value of any VID.
getValue(String) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to poll the value of any VID.
getValue() - Method in class com.ergotech.secs.gem.Monitor: Returns the condition comparison value.
getValue() - Method in class com.ergotech.vib.servers.ab.ControlLogixDataBlock: Returns the value to be written, or null if reading.
getValue() - Method in class com.ergotech.vib.servers.ArrayDataSource: This will return a random number between min and max.
getValue(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This returns the ValueObject at the requested index
getValueAt(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Returns the value at a particular register offset.
getValueAt(int, int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the value at a specific location.
getValueFlash1() - Method in class com.ergotech.vib.manipulators.Blinker
getValueFlash2() - Method in class com.ergotech.vib.manipulators.Blinker
getValueHi() - Method in class com.ergotech.vib.servers.DataSource: Returns the value of the server which will trigger the Hi color change.
getValueHiHi() - Method in class com.ergotech.vib.servers.DataSource: Returns the value of the server which will trigger the HiHi color change.
getValueLo() - Method in class com.ergotech.vib.servers.DataSource: Returns the value of the server which will trigger the Lo color change.
getValueLoLo() - Method in class com.ergotech.vib.servers.DataSource: Returns the value of the server which will trigger the LoLo color change.
getValueObject() - Method in class com.ergotech.secs.gem.GemAlarmsEnabled
getValueObject() - Method in class com.ergotech.secs.gem.GemAlarmsSet
getValueObject() - Method in class com.ergotech.secs.gem.GemCLOCK
getValueObject() - Method in class com.ergotech.secs.gem.GemControlState
getValueObject() - Method in class com.ergotech.secs.gem.GemEventsEnabled
getValueObject() - Method in class com.ergotech.secs.gem.GemMDLN: Set the value to any listeners whenever it is requested.
getValueObject() - Method in class com.ergotech.secs.gem.GemSOFTREV: Set the value to any listeners whenever it is requested.
getValueObject() - Method in class com.ergotech.vib.servers.DataSource: This will return the current value of the server as a ValueObjectInterface.
getValueObject() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: This will return the current value.
getValueObject(Object) - Static method in class com.ergotech.vib.valueobjects.ValueObject
getValueObject(boolean) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(byte) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(char) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(short) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(int) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(long) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a LongValueObject generated from the newValue.
getValueObject(float) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a DoubleValueObject generated from the newValue.
getValueObject(double) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a DoubleValueObject generated from the newValue.
getValueObject(String) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a StringValueObject generated from the newValue.
getValueObject(Color) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Static method that will return a GenericValueObject generated from the Color.
getValueOff() - Method in class com.ergotech.vib.manipulators.Blinker
getValues() - Method in class com.ergotech.secs.gem.GemRPTID: This returns a listing of all VIDs (GemIDs) as a Vector.
getValues() - Method in class com.ergotech.vib.servers.ab.ControlLogixResponseDataBlock: Return the list of values from the PLC.
getValues() - Method in class com.ergotech.vib.servers.ArrayDataSource: This will return a generated ArrayValueObject.
getValues() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Returns the vector of the array.
getValueType() - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable
getValueType() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Returns the value type for this server.
getValueType() - Method in class com.ergotech.vib.servers.fins.FinsServer: Returns the value type for this server.
getValueType() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns the value type for this server.
getValueType() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Returns the value type for this server.
getValueUpdateResponseListener() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: Returns the update response listener.
getVariableName() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Get the variable name
getVersion() - Static method in class TransSECS.MessageReceiveNotifier: Returns a "version" number.
getVID(long) - Method in class com.ergotech.secs.gem.GemHostModel: Return a variable associated with the provided vid, or null if the vid is unknown.
getVID(String) - Method in class com.ergotech.secs.gem.GemHostModel: Return a variable associated with the provided vid public String toString() { String retString = "GEM Host Model VIDs:" + getVids().size() + " CEIDs:"+ getCeids().size() + " RPTIDs:" + getRptids().size() + " ALIDs:" + getAlids().size(); return retString; } Name, or null if the vid is unknown.
getVID() - Method in class com.ergotech.secs.gem.GemLIMITID: Returns the VID that this limit is associated with.
GetVID() - Method in class com.ergotech.secs.VidVPair
getVids() - Method in class com.ergotech.secs.gem.GemHostModel
getVids() - Method in class com.ergotech.transsecs.secs.TransSecsController
getVidSecsFormat() - Method in class com.ergotech.secs.gem.GemHostModel
getVidType() - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable
getViewServers() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Return view-only servers.
getWaitingMessages() - Method in class com.ergotech.secs.SessionManager: Returns a Hashtable of messages waiting for an acknowledgment or a response.
getWordSize() - Method in class com.ergotech.vib.manipulators.ByteBuilder
getWrapper() - Method in class com.ergotech.secs.gem.GemEquipment: This returns the wrapper.
getWrapper(int) - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns a passiveWrapper for the give defined constant.
getWrapper(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Returns a wrapper for the give defined constant.
getWrapper() - Static method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Return the wrapper creating as necessary.
getWrapper(PersistenceInterface) - Static method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Return the wrapper creating as necessary.
getWrapper() - Static method in class com.ergotech.vib.servers.rest.RestWrapper: Return the wrapper creating as necessary.
getWrapper(PersistenceInterface) - Static method in class com.ergotech.vib.servers.rest.RestWrapper: Return the wrapper creating as necessary.
getWrapperDescription(WrapperInterface) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Get the wrapper description.
getXColumnDataType() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Returns the data type for the x column.
getXMax() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the maximum for for the X column data
getXMin() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the minimum for for the X column data
getXYValues() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: This will return a non-timestamped single X, multiple Y TwoDimensionalValueObject
getY() - Method in class com.ergotech.vib.manipulators.Scaler
getYMax() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the maximum for for the Y column data
getYMin() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Gets the minimum for for the Y column data
getZeroBasedTime() - Method in class com.ergotech.vib.servers.ArrayDataSource: Gets whether or not to start at time=0.
globalDebugLevel - Static variable in class com.ergotech.vib.ports.PortDeviceServer: The debug level for all PLCs.
globalSimulation - Static variable in class com.ergotech.secs.HSMSSocketListener: This variable will be true if we are simulating.
globalSimulation - Static variable in class com.ergotech.secs.SessionManager: This variable will be true if we are simulating.
globalSimulation - Static variable in class com.ergotech.vib.ports.PortDeviceServer: This variable will be true if we are simulating PLC read/writes.
globalUniqueID - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
GOOD_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.LocalMessageReference: This datasource will be triggered if a good response is recieved to a message.
GOOD_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: This datasource will be triggered if a good response is recieved to a message.
goodStatusReceived(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Called after sending the message when the result of sending, up to and including seeing a response, is known.
GRANT - Class in com.ergotech.secs: Grant (GRANT) Data Decoder, used in S2F2, F40, S4F26, S13F12, S16F2.
GRANT(byte[]) - Constructor for class com.ergotech.secs.GRANT: Create a new message with binary (format 10) data.
GRANT(int) - Constructor for class com.ergotech.secs.GRANT: Create a new message with binary (format 10) data.
GRANT(SecsFormat) - Constructor for class com.ergotech.secs.GRANT: Create a new message with data contained in a SecsFormat object.
GRANT6 - Class in com.ergotech.secs: Grant6 Permission to send, 1 byte.
GRANT6(byte[]) - Constructor for class com.ergotech.secs.GRANT6: Create a new message with binary (format 10) data.
GRANT6(int) - Constructor for class com.ergotech.secs.GRANT6: Create a new message with binary (format 10) data.
GRANT6(SecsFormat) - Constructor for class com.ergotech.secs.GRANT6: Create a new message with data contained in a SecsFormat object.
GREATER - Static variable in class com.ergotech.secs.MessageVerifierOneItem
GREATEREQUAL - Static variable in class com.ergotech.secs.MessageVerifierOneItem
GreaterThan - Class in com.ergotech.vib.manipulators: Evaluates leftside > rightside and returns 1 if true, 0 otherwise.
GreaterThan() - Constructor for class com.ergotech.vib.manipulators.GreaterThan: Generic Constructor.
GreaterThanOrEqual - Class in com.ergotech.vib.manipulators: Evaluates leftside >= rightside and returns 1 if true, 0 otherwise.
GreaterThanOrEqual() - Constructor for class com.ergotech.vib.manipulators.GreaterThanOrEqual: Generic Constructor.
GREATERTHEN - Variable in class com.ergotech.secs.gem.Monitor: Constant for GREATERTHEN (4).
GREATERTHENEQUAL - Variable in class com.ergotech.secs.gem.Monitor: Constant for GREATERTHENEQUAL (3).
GS_CONNECTION_IN_SS_MODE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a General Session message is received in Single Session Mode.
guf - Variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The Gap Update Factor.
gwtLog - Static variable in class com.ergotech.vib.servers.DataSource: special logger for GWT debugging
GZIP - Static variable in class com.ergotech.transsecs.secs.Base64: Specify that data should be gzip-compressed.

H

handleHandCraftedMessage(SecsMsg) - Method in class com.ergotech.transsecs.secs.TransSecsController
handleResponseMessage(int, SecsMsg) - Method in class com.ergotech.secs.SecsMsg: This message will be called if the message receives an expected reply.
hardSuspended - Variable in class com.ergotech.vib.servers.DataSource: A boolean indicating whether or not the data source has been requested by the user to be suspended The autosuspend flag will not suspend/resume the component if it is hard suspended.
hasError() - Method in class com.ergotech.vib.ports.Port: Returns true if an error has been detected on the port.
hasError() - Method in interface com.ergotech.vib.ports.PortInterface: Returns true if an error has been detected on the port.
hashCode() - Method in class com.ergotech.secs.SecsDataStructure
hashCode() - Method in class com.ergotech.secs.SecsFormat11
hashCode() - Method in class com.ergotech.secs.SecsFormat20
hashCode() - Method in class com.ergotech.secs.SecsFormat22
hashCode() - Method in class com.ergotech.transsecs.secs.SecsFormat99
hashCode() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: The hashcode uses the name of the controller and the name of the bean.
hashCode() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.BooleanObjectValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.GenericValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.LongValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.NumberObjectValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.PropertyValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.StringValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject
hashCode() - Method in class com.ergotech.vib.valueobjects.ValueObject
hasServers() - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns true if this device has servers associated with it.
hasServers() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: Returns true.
hasServers() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Returns true if there are any servers associated with this device.
hasTimeColumn() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Return whether the TwoDimensionalValueObject has a time column
hasTimedOut() - Method in class com.ergotech.secs.HSMSHeaderMsg: Returns true if the message has timedout waiting for a response.
hasTimedOut() - Method in class com.ergotech.secs.SecsMsg: Returns true if the message has timedout waiting for a response.
haveShownNoPortsWarning - Static variable in class com.ergotech.vib.ports.SerialWrapper: This will be set to true once the message about no enumerated ports is shown.
HCACK - Class in com.ergotech.secs: Host Command Parameter Acknoowledge Code, 1 Byte - Used in S2F42, F50 This is a one byte binary (Format 10) data structure that has the following values:
HCACK(byte) - Constructor for class com.ergotech.secs.HCACK: Create a new message from a byte data type.
HCACK(SecsFormat) - Constructor for class com.ergotech.secs.HCACK
headerOffset - Variable in class com.ergotech.vib.servers.ppi.PPIServer: The header offset in and SD2 message (7).
HEX_REG_0x - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as hex or decimal.
HEX_REG_OTHER - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as hex or decimal.
hexDigits - Static variable in class com.ergotech.vib.servers.modbus.ModbusASCIIDeviceServer
HIGHER - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
HINTEG - Class in com.ergotech.secs: High Integrity mode.
HINTEG(byte) - Constructor for class com.ergotech.secs.HINTEG: Create a new message with an 1-Byte integer (SecsFormat51).
HINTEG(SecsFormat) - Constructor for class com.ergotech.secs.HINTEG: Create a new message with the data contained in a SecsFormat object.
HistoricalTimebaseBridger - Class in com.ergotech.vib.manipulators.array
HistoricalTimebaseBridger() - Constructor for class com.ergotech.vib.manipulators.array.HistoricalTimebaseBridger
HistoricalValueObject - Class in com.ergotech.vib.valueobjects: This will store an array of values that where found with the two dates given.
HistoricalValueObject(Date, Date, Vector) - Constructor for class com.ergotech.vib.valueobjects.HistoricalValueObject: This is the starting and ending date used for finding the range of values.
HOST_INITIATED_CONNECT - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant HOST_INITIATED_CONNECT.
HOST_OFFLINE - Static variable in class com.ergotech.secs.gem.OnlineHandler: HOST_OFFLINE value is 3 matching E5 definition.
HostLinkDeviceServer - Class in com.ergotech.vib.servers.omron: This class provides the interface to the PLC.
HostLinkDeviceServer() - Constructor for class com.ergotech.vib.servers.omron.HostLinkDeviceServer: The default constructor.
hostLinkDeviceServer - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: We maintain a list of all instances of HostLinkDeviceServers which can be readily accessed when creating a list for the editor.
HostLinkServer - Class in com.ergotech.vib.servers.omron: This is the implementation of the HostLink protocol.
HostLinkServer() - Constructor for class com.ergotech.vib.servers.omron.HostLinkServer: Default constructor.
hostMessageError(String, int, int, String) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Indicate that an error has occured in processing a host message and create the error list if appropriate.
hostMessageParameterMatchError(SecsMsg, Set<String>, SecsFormat00, List<String>) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Indicate that an error has occured in processing a host message and create the error list if appropriate.
hour - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
hour(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the hour of the day.
hsa - Variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The highest station address.
HSMS_ERROR_INVALID_PROTOCOL - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS request with an unknown ptype is received.
HSMS_GS_INFO_VALID_SELECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS select request is received.
HSMS_GS_INVALID_DESLECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS deselect request is received.
HSMS_GS_INVALID_DESLECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS deselect response is received.
HSMS_GS_INVALID_REJECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS reject request is received.
HSMS_GS_INVALID_SELECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS select request is received.
HSMS_GS_INVALID_SELECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS select response is received.
HSMS_GS_INVALID_STYPE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS request with an unknown stype is received.
HSMS_GS_LINK_TEST_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS linktest request is received.
HSMS_GS_LINK_TEST_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS linktest response is received.
HSMS_GS_LINK_TEST_RESPONSE_TRANSACTION_NOT_OPEN - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS linktest response is received and there is no open transaction.
HSMS_GS_SELECT_TRANSACTION_NOT_OPEN - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS select response is received and there is no open transaction.
HSMS_GS_VALID_DESLECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS deselect request is received.
HSMS_GS_VALID_DESLECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS deselect response is received.
HSMS_GS_VALID_REJECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS reject request is received.
HSMS_GS_VALID_SELECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS select response is received.
HSMS_GS_VALID_SEPARATE_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS separate request is received.
HSMS_MSG_FORMAT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS request is invalid.
HSMS_SESSION_NOT_SELECTED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS request on an unselected session.
HSMS_SS_DESLECT - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS deselect response is received.
HSMS_SS_INFO_VALID_SELECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS select request is received.
HSMS_SS_INVALID_DESLECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS deselect request is received.
HSMS_SS_INVALID_SELECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS select request is received.
HSMS_SS_INVALID_SELECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever invalid HSMS select response is received.
HSMS_SS_INVALID_STYPE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS request with an unknown stype is received.
HSMS_SS_LINK_TEST_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS linktest request is received.
HSMS_SS_LINK_TEST_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS linktest response is received.
HSMS_SS_LINK_TEST_RESPONSE_TRANSACTION_NOT_OPEN - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS linktest response is received and there is no open transaction.
HSMS_SS_REJECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS reject request is received.
HSMS_SS_SELECT_TRANSACTION_NOT_OPEN - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever an HSMS select response is received and there is no open transaction.
HSMS_SS_VALID_DESLECT_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS deselect request is received.
HSMS_SS_VALID_DESLECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS deselect response is received.
HSMS_SS_VALID_SELECT_RESPONSE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS select response is received.
HSMS_SS_VALID_SEPARATE_REQUEST - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever valid HSMS separate request is received.
HSMSActiveWrapper - Class in com.ergotech.secs
HSMSActiveWrapper(int, int, String) - Constructor for class com.ergotech.secs.HSMSActiveWrapper: Create the passive wrapper for the particular TCP/IP port.
HSMSConnectionManager - Class in com.ergotech.secs
HSMSConnectionManager(PortManager) - Constructor for class com.ergotech.secs.HSMSConnectionManager: The constructor for the portManager.
HSMSConnectionManager(String, int) - Constructor for class com.ergotech.secs.HSMSConnectionManager: Create a connection manager to connect to a specific port on a remote machine.
HSMSHeaderMsg - Class in com.ergotech.secs: This object is just for Sending HSMSHeaderMessages.
HSMSPassiveWrapper - Class in com.ergotech.secs
HSMSPassiveWrapper(int) - Constructor for class com.ergotech.secs.HSMSPassiveWrapper: Create the passive wrapper for the particular TCP/IP port.
HSMSPassiveWrapper(int, int) - Constructor for class com.ergotech.secs.HSMSPassiveWrapper
HSMSSessionManager - Class in com.ergotech.secs: This object provides the transport layer for HSMS.
HSMSSocketListener - Class in com.ergotech.secs: This object listens for connections on a socket.
HSMSSocketManager - Class in com.ergotech.secs
HSMSSocketManager(int) - Constructor for class com.ergotech.secs.HSMSSocketManager: Create an HSMSSocketManger to listen on a particular port.
HSMSSocketManager(int, String) - Constructor for class com.ergotech.secs.HSMSSocketManager: Create an HSMSSocketManger to listen on a particular port.
HSMSWrapper - Class in com.ergotech.secs
HSMSWrapper(int, int) - Constructor for class com.ergotech.secs.HSMSWrapper: Create the passive wrapper for the particular TCP/IP port.

I

I - Variable in class com.ergotech.vib.manipulators.spc.PidControl
ICL_STYLE - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as % (ICLinks Style).
id - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable: That actual GEM id.
idType - Static variable in class com.ergotech.secs.DATAID: This is the default ID type.
idTypeFromFormat(SecsFormat) - Static method in class com.ergotech.transsecs.secs.PublishBean: Return the type of the ID (30,31,32,34, 50, 51,52,54, etc.
ignoreT6 - Static variable in class com.ergotech.secs.HSMSHeaderMsg: Set to true to ignore T6 errors.
imageSize - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The number of bytes to read/write.
inByteSwap(int, int) - Static method in class com.ergotech.vib.servers.plc.PLCServer: This method will swap the bytes in the value according to the swap format.
incrementErrorCount() - Method in class com.ergotech.vib.ports.PortDeviceServer: This routine increments the error count.
incrementErrorCount() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: This routine will limit retry attempts.
IncrementServer - Class in com.ergotech.vib.servers: This is a data source for testing components with integer values.
IncrementServer() - Constructor for class com.ergotech.vib.servers.IncrementServer: The default constructor.
indentCharacters - Static variable in class com.ergotech.secs.SecsFormat00: sets the indent charaters for SML formatting.
indexOf(Object) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
info(String) - Method in class com.ergotech.transsecs.secs.Log4JLogger: write an information string to the log
INFORMATION - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when some indication of something interesting.
init(boolean) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: Initialize the disk.
init() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Calls through to the TransSecsController method.
init() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Calls through to the TransSecsController method.
init() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Initialize the component.
init() - Method in class com.ergotech.transsecs.secs.TransSecsController: Subclasses will fill in the data needed to make a connection.
init() - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: Initialize referenced devices
init() - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Remove the "sendMessage" inport for incoming messages.
init() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Add the event messages as CEIDs.
init() - Method in class com.ergotech.vib.ports.PortDeviceServer: Initialize the Ports.
init() - Method in class com.ergotech.vib.servers.DataSource: By default this method does nothing.
init() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Init all the servers.
init() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Create the server.
init() - Method in class com.ergotech.vib.servers.rest.RestWrapper: Create the server.
initializeConnection() - Method in class com.ergotech.secs.HSMSActiveWrapper: Create the connection to the equipment.
initializeConnection() - Method in class com.ergotech.secs.HSMSPassiveWrapper
initializeConnection() - Method in class com.ergotech.secs.SecsIWrapper: Connect the connection.
initializeConnection() - Method in interface com.ergotech.secs.WrapperInterface: Connected the session.
initializeLogger() - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Initialize all the loggers
initializePortPool() - Method in class com.ergotech.vib.ports.PortDeviceServer: Creates the factory for this object.
initializePortPool() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Overridden to set the maximum number of connections.
initializePortPool() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Overridden to set the maximum number of connections.
initializePortPool() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Sets the SerialPort parameters after creating the port.
initializePortPool() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Overridden to set the maximum number of connections.
initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: Sets the SerialPort parameters after creating the port.
initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Overridden to set the maximum number of connections to one.
initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Overridden to set the maximum number of connections.
initializePortPool() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: Creates the factory for this object.
initializePortPool() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Sets the SerialPort parameters after creating the port.
initializePortPool() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Sets the SerialPort parameters after creating the port.
initializePortPool() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Overridden to set the maximum number of connections.
initialState - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: The initial state NOT_COMMUNICATING.
INITIALVALUE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used with the clientRequest when a client has a value that should be stored in the datasource.
initMessage() - Method in class com.ergotech.transsecs.secs.MessageBean: Finds the controller and specific message and creates connectors from the message.
InputStream(InputStream) - Constructor for class com.ergotech.transsecs.secs.Base64.InputStream: Constructs a Base64#InputStream in DECODE mode.
InputStream(InputStream, int) - Constructor for class com.ergotech.transsecs.secs.Base64.InputStream: Constructs a Base64#InputStream in either ENCODE or DECODE mode.
installTimeoutSocketFactory() - Static method in class com.ergotech.vib.ports.TimeoutSocketFactory: Installs this SocketImplFactory.
INT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
INT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
INTTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
INVALID - Static variable in class com.ergotech.secs.MessageVerifierOneItem
INVALID_DEVICE_ID_WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a message with an invalid Device ID is received.
invalidDataFormat(Object, SecsMsg) - Method in interface com.ergotech.secs.UnrecoverableErrorInterface: This method is called if the system detects an invalid data format.
invalidDeviceId(ConnectionManager, byte[]) - Method in interface com.ergotech.secs.UnrecoverableErrorInterface: This method is called when a message is received on an invalid device ID.
InvalidECIDChangeException - Exception in com.ergotech.secs.gem
InvalidECIDChangeException(String, int) - Constructor for exception com.ergotech.secs.gem.InvalidECIDChangeException: This exception is thrown by an instance of the ECIDValidationInterface when there is some error updating the ECID.
invalidStreamOrFunction(Object, SecsMsg) - Method in interface com.ergotech.secs.UnrecoverableErrorInterface: This method is called when a message is not understood.
invertHostOrEquipmentConnection - Static variable in class com.ergotech.transsecs.secs.TransSecsController: Set to true if want to simulate the equipment from files generated for the host or the host if generated for the equipment.
Invoke(MessageNotifierEventArgs) - Method in class TransSECS.MessageDelegate
Invoke(MessageNotifierEventArgs) - Method in interface TransSECS.MessageDelegate.Method
IOTArrayBuilder - Class in com.ergotech.vib.manipulators.array: This will take value objects from a dynamic set of inputs and create an array value object and a JSON string whenever the main input is triggered.
IOTArrayBuilder() - Constructor for class com.ergotech.vib.manipulators.array.IOTArrayBuilder: Generic Constructor.
IOTArraySplitter - Class in com.ergotech.vib.manipulators.array: Input a JSON packet and output the values to multiple outputs.
IOTArraySplitter() - Constructor for class com.ergotech.vib.manipulators.array.IOTArraySplitter: Create and initialize the manipulator.
IOTArraySplitter.SplitterDataSource - Class in com.ergotech.vib.manipulators.array: This data source allows for an initialization of the value object interface and so provides the ability for a subclass (eg PopupInitializer) to implement different behavior whent he value is first set vs.
IPAddressServer - Class in com.ergotech.vib.manipulators: This server will output the ip addresses of the host whenever it is triggered.
IPAddressServer() - Constructor for class com.ergotech.vib.manipulators.IPAddressServer: constructor
isActive() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Returns true if spooling is active
isActive() - Method in class com.ergotech.vib.servers.SimpleDataSource: This method will return true if the server is active.
isAllowDuplicateSECSIMessages() - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns true if the system bytes of the message do not need to be unique (mis-implemented SECSI messages).
isAppropriateAddress(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Determines if this address points to the same type of address in the same PLC as the rest of the block.
isAuthorized(String, String, String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
isAuthorized(String, String, String) - Method in class com.ergotech.vib.manipulators.MixSecurityManager
isBCD() - Method in class com.ergotech.vib.servers.plc.PLCServer
isBlockReads() - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Returns true if we are blocking reads.
isBumplessControl() - Method in class com.ergotech.vib.manipulators.spc.PidControl
isCellEditable(int, int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return false.
isConfigured() - Method in class com.ergotech.vib.servers.ab.DF1Server
isConfigured() - Method in class com.ergotech.vib.servers.fins.FinsServer
isConfigured() - Method in class com.ergotech.vib.servers.melsec.MelsecServer
isConfigured() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Checks the address to make sure that this server is configured.
isConfigured() - Method in class com.ergotech.vib.servers.omron.HostLinkServer
isConfigured() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns true if the configuration of this server is complete.
isConfigured() - Method in class com.ergotech.vib.servers.ppi.PPIServer
isConsideredMultiblock() - Method in class com.ergotech.secs.SecsMsg: Returns whether this message is considered multiblock.
isDefault() - Method in class com.ergotech.secs.SessionManager: Returns true if this port manager is the default active port manager.
isDirty() - Method in class com.ergotech.vib.servers.plc.DirtyVector: Returns the dirty flag.
isDirty() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: This method returns true if the block has been marked as dirty.
isDirty() - Method in class com.ergotech.vib.servers.plc.PLCServer: This method returns true if the block has been marked as dirty.
isEmpty() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
isEnableAllEvents() - Method in class com.ergotech.secs.gem.GemHostModel
isEnabled() - Method in class com.ergotech.secs.gem.CommunicationsHandler: This will return true if we are enabled.
isEnabled() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Returns true if spooling is enabled.
isEnabled() - Method in class com.ergotech.vib.manipulators.Emailer
isEnabledFor(Level) - Method in class com.ergotech.transsecs.secs.Log4JLogger: access method for logger, returns this log4jLogger access level (set by log4j.xml)
isFireLate() - Method in class com.ergotech.vib.manipulators.Constant
isFlowOn() - Method in class com.ergotech.vib.manipulators.DataValve: Returns the current state.
isForceReload() - Method in class com.ergotech.vib.manipulators.UserFileReader: Returns false, part of the reload mechanism.
isGemCompliant() - Static method in class com.ergotech.transsecs.secs.VIBMessageBean
isHandleAsHostMessage() - Method in class com.ergotech.transsecs.secs.VIBMessageBean
isHandleHostMessageErrors() - Method in class com.ergotech.transsecs.secs.VIBMessageBean
isHardSuspended() - Method in class com.ergotech.vib.servers.DataSource: This will return true if the server is user has set the component to be hard suspended.
isJanIsOne() - Method in class com.ergotech.vib.manipulators.datetime.DateCreator
isLastBlock() - Method in class com.ergotech.secs.SecsMsg
isLinked() - Method in class com.ergotech.secs.gem.GemCEID: Returns true if any reports are linked to this CEID.
isListening() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: This method will return true if the server is running.
isMailAsAttachment() - Method in class com.ergotech.vib.manipulators.Emailer
isMultiBlock() - Method in class com.ergotech.secs.S10F5
isMultiBlock() - Method in class com.ergotech.secs.S1F6
isMultiBlock() - Method in class com.ergotech.secs.S1F8
isMultiBlock() - Method in class com.ergotech.secs.S2F10
isMultiBlock() - Method in class com.ergotech.secs.S7F20
isMultiBlock() - Method in class com.ergotech.secs.S7F4
isMultiBlock() - Method in class com.ergotech.secs.S7F6
isMultiBlock() - Method in class com.ergotech.secs.SecsMsg: Returns true if this message is multi-block.
isNullTerminated() - Method in class com.ergotech.vib.servers.ppi.S7: For Siemens string the first two bytes of the string indicate respectively: - First Byte: Max Length of the string (In our case 48) - Second Byte: Actual length of the string (In our case 5) Set this variable to true to use Null Terminated strings rather than Siemens Strings.
isOffset() - Method in class com.ergotech.vib.servers.modbus.ModbusDataBlock: Returns true if the response length is an offset into the message, or false if the length is an absolute length.
isPinPullUp() - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
isPlainText() - Method in class com.ergotech.vib.manipulators.MixSecurityManager
isReadAsBinary() - Method in class com.ergotech.vib.manipulators.URLReader: Set to true to read data from the URL as binary.
isReply() - Method in class com.ergotech.secs.SecsMsg: Returns true if this message is a reply.
isRunning() - Method in class com.ergotech.vib.ports.PortPool: Returns the running status of this port pool.
isRunning() - Method in class com.ergotech.vib.servers.DataSource: Returns true if the server is running.
isS1F3ReturnsValues() - Static method in class com.ergotech.secs.gem.GemHandler: The return will be true if the S1F3 method should return the values rather than the IDs.
isS1F3ReturnsValues() - Static method in class com.ergotech.transsecs.secs.TransSecsController: The return will be true if the S1F3 method should return the values rather than the IDs.
isScreenLocal() - Method in class com.ergotech.vib.servers.SimpleDataSource: This flag hints that this bean should be generated such that it is connected only to the particular screen and that changes made to it will remain local to that screen.
isSelected() - Method in class com.ergotech.secs.HSMSSessionManager: Returns true if the session is selected, otherwise false.
isSendOnlyChangedValuesDefault() - Method in class com.ergotech.vib.servers.DataSource
isSet() - Method in class com.ergotech.secs.gem.GemALID: Returns the status of the alarm.
isSimilar(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCServer: This will be called by the PLCAddressBlock to determine if the server is "similar" to this server.
isSimulating() - Method in class com.ergotech.secs.HSMSSocketListener
isSimulating() - Method in class com.ergotech.secs.SessionManager
isSimulating() - Method in class com.ergotech.vib.ports.PortDeviceServer
isSimulating() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
isSimulationFlag() - Method in class com.ergotech.secs.HSMSSocketListener
isSimulationFlag() - Method in class com.ergotech.secs.SessionManager
isSimulationFlag() - Method in class com.ergotech.vib.ports.PortDeviceServer
isSingleSession() - Method in interface com.ergotech.secs.ConnectionManagerInterface
isSingleSession() - Method in class com.ergotech.secs.HSMSConnectionManager: Returns true if the current session is a single session.
isStarted() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock
isStarttls() - Method in class com.ergotech.vib.manipulators.Emailer
isStartUpHigh() - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
isStartUpHigh() - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
isSuspended() - Method in class com.ergotech.vib.servers.DataSource: This will return true if the server is currently suspended.
isTriggerOnThread() - Method in class com.ergotech.vib.servers.plc.PLCServer
isUseDefault() - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Returns whether or not to use the defaultReplaceString
isValid() - Method in class com.ergotech.secs.SessionManager
isValidHostCommandMessage(SecsMsg) - Method in class com.ergotech.secs.SessionManager: host command - must have at least this structure.
isVersion2OrHigher() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
iterator() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject

J

JSON - Static variable in class com.ergotech.secs.SecsFormat00: Set to true to output the "toString" as JSON.
JSONEncodeDecode - Class in com.ergotech.secs
JSONEncodeDecode() - Constructor for class com.ergotech.secs.JSONEncodeDecode
justification - Variable in class com.ergotech.secs.SecsFormat20: The jusfication (left or right) of this item.

L

label - Variable in class com.ergotech.vib.servers.MarqueeServer
las - Variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The array of active addresses.
lastIndexOf(Object) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
lastProcessed - Variable in class com.ergotech.transsecs.secs.TransSecsController: The last message that was processed.
LEFT_JUSTIFY - Static variable in class com.ergotech.secs.SecsFormat20: Jusfication constant.
leftSideValue - Variable in class com.ergotech.vib.manipulators.MasterComparer: This is the input value received at the leftSideValueInput.
leftSideValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterComparer: This is the primary input for the comparison to the second input.
LENGTH - Class in com.ergotech.secs: Process Program Length (LENGTH) Data Decoder, used in S2F1, S7F1 and S7F29.
LENGTH(byte) - Constructor for class com.ergotech.secs.LENGTH: Create a new message with 1 byte integer.
LENGTH(short) - Constructor for class com.ergotech.secs.LENGTH: Create a new message with 2 byte integer.
LENGTH(int) - Constructor for class com.ergotech.secs.LENGTH: Create a new message with 4 byte integer.
LENGTH(long) - Constructor for class com.ergotech.secs.LENGTH: Create a new message with 8 byte integer.
LENGTH(SecsFormat) - Constructor for class com.ergotech.secs.LENGTH: Create a new message with data contained in a SecsFormat object.
length - Variable in class com.ergotech.secs.SecsFormat11: The length of this data, defaults to one.
length - Variable in class com.ergotech.secs.SecsFormat22: The length of the format.
length - Variable in class com.ergotech.secs.SecsFormat30: The length of this data, defaults to eight.
length - Variable in class com.ergotech.secs.SecsFormat31: The length of this data, defaults to one.
length - Variable in class com.ergotech.secs.SecsFormat32: The length of this data, defaults to two.
length - Variable in class com.ergotech.secs.SecsFormat34: The length of this data, defaults to four.
length - Variable in class com.ergotech.secs.SecsFormat40: The length of this data, defaults to eight.
length - Variable in class com.ergotech.secs.SecsFormat44: The length of this data, defaults to four.
length - Variable in class com.ergotech.secs.SecsFormat50: The length of this data, defaults to eight.
length - Variable in class com.ergotech.secs.SecsFormat51: The length of this data, defaults to one.
length - Variable in class com.ergotech.secs.SecsFormat52: The length of this data, defaults to two.
length - Variable in class com.ergotech.secs.SecsFormat54: The length of this data, defaults to four.
LESS - Static variable in class com.ergotech.secs.MessageVerifierOneItem
LESSEQUAL - Static variable in class com.ergotech.secs.MessageVerifierOneItem
LessThan - Class in com.ergotech.vib.manipulators: Evaluates leftside < rightside and returns 1 if true, 0 otherwise.
LessThan() - Constructor for class com.ergotech.vib.manipulators.LessThan: Generic Constructor.
LessThanOrEqual - Class in com.ergotech.vib.manipulators: Evaluates leftside <= rightside and returns 1 if true, 0 otherwise.
LessThanOrEqual() - Constructor for class com.ergotech.vib.manipulators.LessThanOrEqual: Generic Constructor.
LESSTHEN - Variable in class com.ergotech.secs.gem.Monitor: Constant for LESSTHEN (1).
LESSTHENEQUAL - Variable in class com.ergotech.secs.gem.Monitor: Constant for LESSTHENEQUAL (2).
level - Variable in class com.ergotech.vib.servers.FloatFluxServer: The target level.
LIMIT_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an limit is registered.
LIMIT_TRIGGERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an limit is triggered.
LIMIT_UNREGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when a limit is unregistered.
LIMITACK - Class in com.ergotech.secs: Acknowledgment code for variable limit attribute set, 1 byte.
LIMITACK(byte) - Constructor for class com.ergotech.secs.LIMITACK: Create a new message from a byte data type.
LIMITACK(SecsFormat) - Constructor for class com.ergotech.secs.LIMITACK
LIMITID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a LIMITID.
LIMITID - Class in com.ergotech.secs: LIMITID Data Decoder.
LIMITID(byte[]) - Constructor for class com.ergotech.secs.LIMITID: Create a new message with binary (format 10) data.
LIMITID(int) - Constructor for class com.ergotech.secs.LIMITID: Create a new message with integer data.
LIMITID(SecsFormat) - Constructor for class com.ergotech.secs.LIMITID: Create a new message with data contained in a SecsFormat object.
LIMITID - Static variable in class TransSECS.GemIDConnection: Used to identify a LIMITID.
LIMITMAX - Class in com.ergotech.secs: LIMITMAX data decode.
LIMITMAX(String) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with ASCII (format 20) data.
LIMITMAX(boolean) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with Boolean (SecsFormat11) data.
LIMITMAX(float) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 4-Byte floating point number (SecsFormat44).
LIMITMAX(double) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 8-Byte floating point number (SecsFormat40).
LIMITMAX(long) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 8-Byte integer (SecsFormat30).
LIMITMAX(byte) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 1-Byte integer (SecsFormat31).
LIMITMAX(short) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 2-Byte integer (SecsFormat32).
LIMITMAX(int) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with an 4-Byte integer (SecsFormat34).
LIMITMAX(SecsFormat) - Constructor for class com.ergotech.secs.LIMITMAX: Create a new message with data contained in a SecsFormat object.
LIMITMIN - Class in com.ergotech.secs: LIMITMIN data decode.
LIMITMIN(String) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with ASCII (format 20) data.
LIMITMIN(boolean) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with Boolean (SecsFormat11) data.
LIMITMIN(float) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 4-Byte floating point number (SecsFormat44).
LIMITMIN(double) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 8-Byte floating point number (SecsFormat40).
LIMITMIN(long) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 8-Byte integer (SecsFormat30).
LIMITMIN(byte) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 1-Byte integer (SecsFormat31).
LIMITMIN(short) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 2-Byte integer (SecsFormat32).
LIMITMIN(int) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with an 4-Byte integer (SecsFormat34).
LIMITMIN(SecsFormat) - Constructor for class com.ergotech.secs.LIMITMIN: Create a new message with data contained in a SecsFormat object.
linkEvent(CEID, RPTID) - Method in class com.ergotech.secs.Event
linkEvent(S2F35) - Method in class com.ergotech.secs.Event: This is expecting a SecsFormat00 with a DATAID and a SecsFormat of SecsFormat00's that containing two elements, the first element is a CEID and the second is is another SecsFormat00 full of only RPTID's.
LINKID - Class in com.ergotech.secs: LINKID.
LINKID(int) - Constructor for class com.ergotech.secs.LINKID: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
LINKID(SecsFormat) - Constructor for class com.ergotech.secs.LINKID: Create a new message with the data contained in a SecsFormat object.
linkReport(SecsFormat3x5x, SecsFormat3x5x, boolean) - Method in class com.ergotech.secs.gem.ECHandler: Link a report to a CEID.
linkReport(SecsFormat3x5x, SecsFormat3x5x, boolean) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Link a report to a CEID.
linkReport(GemRPTID) - Method in class com.ergotech.secs.gem.GemCEID: Links the report to this CEID if it is not already linked.
LinkTest - Class in com.ergotech.secs: This object will send HSMS Link Tests periodically.
LinkTest() - Constructor for class com.ergotech.secs.LinkTest: The constructor.
LinkTest(HSMSSessionManager) - Constructor for class com.ergotech.secs.LinkTest: The constructor.
linkTestIntervalValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Sets all device ids to be valid or not.
LINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
LINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
listenForConnections() - Method in class com.ergotech.secs.HSMSPassiveWrapper
listenForMessages(TCPPassiveSocket) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Listens on the socket and handles incoming messages.
listIterator() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
listIterator(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
listPortNames() - Static method in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
loadFromDisk(String, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: Returns the persistent instance of the spool handler.
loadFromXML(String, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x) - Static method in class com.ergotech.secs.gem.GemSpoolHandler: This will load the last saved persistence file.
loadMappingFile() - Static method in class com.ergotech.vib.ports.SerialWrapper
LOC - Class in com.ergotech.secs: Machine material location code, 1 byte.
LOC(byte) - Constructor for class com.ergotech.secs.LOC: Create a new message from a byte data type.
LOC(SecsFormat) - Constructor for class com.ergotech.secs.LOC: Create a new message from a SecsFormat data type.
LOCAL_ONLINE - Static variable in class com.ergotech.secs.gem.OnlineHandler: LOCAL_ONLINE value is 4 matching E5 definition.
localAddress - Static variable in class com.ergotech.vib.ports.UDPActiveSocket: If this is set it will be used as the address to bind the local socket.
locale - Variable in class com.ergotech.vib.valueobjects.ValueObject: The Locale that this object was created in.
LocalEquipmentConfig - Class in com.ergotech.transsecs.secs: This object can be placed on an MIStudio screen and used to configure a SECS connection.
LocalEquipmentConfig() - Constructor for class com.ergotech.transsecs.secs.LocalEquipmentConfig: The default constructor.
LocalEquipmentConfig(PersistenceInterface) - Constructor for class com.ergotech.transsecs.secs.LocalEquipmentConfig
LocalHostConfig - Class in com.ergotech.transsecs.secs: This object can be placed on an MIStudio screen and used to configure a SECS connection.
LocalHostConfig() - Constructor for class com.ergotech.transsecs.secs.LocalHostConfig: The name of the getTransSecsVoyeur() we are configuring.
LocalHostConfig(PersistenceInterface) - Constructor for class com.ergotech.transsecs.secs.LocalHostConfig
LocalMessageReference - Class in com.ergotech.transsecs.secs: This bean acts as a "wrapper" or reference for a TransSECS generated VIBMessageBean subclass deployed locally.
LocalMessageReference() - Constructor for class com.ergotech.transsecs.secs.LocalMessageReference: This sets the inports based on the Vector provided by getInports.
localPort - Static variable in class com.ergotech.vib.ports.UDPActiveSocket: If this is > 0 it will be used as the local port for binding.
localRemoteStateValueInput(ValueChangedEvent) - Method in class com.ergotech.secs.gem.OnlineHandler: This is an input that can be used to control the current local/remote substate.
LocalSecurityManager - Class in com.ergotech.vib.manipulators: A fairly insecure, security component.
LocalSecurityManager() - Constructor for class com.ergotech.vib.manipulators.LocalSecurityManager
log(String) - Method in class com.ergotech.secs.NetLogger: Send the given string to the listening ports.
log(String, String) - Static method in class com.ergotech.secs.SyslogLogger: Send the give string to the syslog.
Log4JLogger - Class in com.ergotech.secs.gem: This sends logging information to the log4j logging system.
Log4JLogger() - Constructor for class com.ergotech.secs.gem.Log4JLogger: The default constructor.
Log4JLogger - Class in com.ergotech.transsecs.secs: This sends logging information to the log4j logging system.
Log4JLogger() - Constructor for class com.ergotech.transsecs.secs.Log4JLogger: The default constructor.
Log4JLogger(String, String) - Constructor for class com.ergotech.transsecs.secs.Log4JLogger: The default constructor.
LOG_MESSAGE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The property name for the message to be logged with the value.
logBase10(double) - Static method in class com.ergotech.vib.utils.Utils
logException(Throwable) - Static method in class com.ergotech.vib.servers.DataSource: Logs exceptions.
Logger - Class in com.ergotech.secs
Logger(String, String) - Constructor for class com.ergotech.secs.Logger: Construct the logger with the strings that will be displayed for sent and received data.
logger - Variable in class com.ergotech.secs.SessionManager: The logger used for this session manager.
LoggerInterface - Interface in com.ergotech.secs: This is the interface used by the SECS subsystem to log useful and interesting(?) information about what is happening within the SECS system.
logGWT(Object, int) - Static method in class com.ergotech.vib.servers.DataSource: log an object message (which allows log4j to print the stack trace, if the logger inteface is using log4j)
logGWT(Object) - Static method in class com.ergotech.vib.servers.DataSource: log all non-designated gwtLog levels as info
logInfo(String) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Log4J log information about this component.
logInfo(String) - Static method in class com.ergotech.transsecs.secs.VIBMessageBean: Log information about the reception of messages.
logixDeviceServers - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: We maintain a list of all instances of Device Servers which can be readily accessed when creating a list for the editor.
logixDeviceServers - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: We maintain a list of all instances of Device Servers which can be readily accessed when creating a list for the editor.
logixDeviceServers - Static variable in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: We maintain a list of all instances of Device Servers which can be readily accessed when creating a list for the editor.
LogixEthernetDeviceServer - Class in com.ergotech.vib.servers.ab: This class provides the interface to the PLC.
LogixEthernetDeviceServer() - Constructor for class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: This sets the factory name.
logMessage(String) - Static method in class com.ergotech.vib.servers.DataSource: Logs informational/debug messages.
logTrace(String) - Static method in class com.ergotech.vib.servers.DataSource: Logs informational/debug messages.
longName() - Method in class com.ergotech.secs.S100F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F105: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F31: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F32: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S100F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S10F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F12: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F19: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F20: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F21: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F22: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F23: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F24: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F25: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F26: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F27: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F28: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F29: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F30: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F31: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F32: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F33: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F34: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F35: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F36: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F37: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F38: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F39: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F40: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F41: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F42: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F43: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F44: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F45: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F46: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F47: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F48: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S15F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F12: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F19: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F20: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F3: This will return true if we have a null public boolean getAllRows() { return allRows; } /** Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F6
longName() - Method in class com.ergotech.secs.S1F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S1F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F12: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F19: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F20: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F21: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F22: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F23: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F24: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F25: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F26: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F27: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F28: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F29: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F30: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F31: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F32: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F33: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F34: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F35: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F36: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F37: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F38: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F39: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F40: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F41: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F42: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F43: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F44: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F45: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F46: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F47: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F48: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F49: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F50: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S2F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S5F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F12: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F19: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F20: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F21: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F22: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F23: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F24: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F25: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F26: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F27: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F28: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F29: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F30: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S6F99: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F10: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F12: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F14: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F15: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F16: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F17: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F18: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F19: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F2: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F20: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F4: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F6: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F8: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S7F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S99F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F0: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F1: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F11: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F13: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F3: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F5: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F7: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.S9F9: Returns the long name for this object.
longName() - Method in class com.ergotech.secs.SecsMsg: Returns the long name for this message.
longName() - Method in class com.ergotech.secs.SecsTrigger
LongToDate - Class in com.ergotech.vib.manipulators.datetime: This will take an input (convert to a long) and convert it to a Date value object.
LongToDate() - Constructor for class com.ergotech.vib.manipulators.datetime.LongToDate: Generic Constructor.
LONGTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
LongValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
LongValueObject() - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: The default constructor.
LongValueObject(long, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(long) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(int, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(int) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(short, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(short) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(byte, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(byte) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(char, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(char) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(boolean, Color) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LongValueObject(boolean) - Constructor for class com.ergotech.vib.valueobjects.LongValueObject: Creates a value object with the current integer value.
LOWER - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
LOWERDB - Class in com.ergotech.secs: LOWERDB data decode.
LOWERDB(String) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with ASCII (format 20) data.
LOWERDB(boolean) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with Boolean (SecsFormat11) data.
LOWERDB(float) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 4-Byte floating point number (SecsFormat44).
LOWERDB(double) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 8-Byte floating point number (SecsFormat40).
LOWERDB(long) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 8-Byte integer (SecsFormat30).
LOWERDB(byte) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 1-Byte integer (SecsFormat31).
LOWERDB(short) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 2-Byte integer (SecsFormat32).
LOWERDB(int) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with an 4-Byte integer (SecsFormat34).
LOWERDB(SecsFormat) - Constructor for class com.ergotech.secs.LOWERDB: Create a new message with data contained in a SecsFormat object.
LOWERZONE - Static variable in class com.ergotech.secs.gem.GemLIMITID
LRACK - Class in com.ergotech.secs: Link Report Acknowledge code.
LRACK(byte) - Constructor for class com.ergotech.secs.LRACK: Create a new message from a byte data type.
LRACK(SecsFormat) - Constructor for class com.ergotech.secs.LRACK
LVACK - Class in com.ergotech.secs: Variable limit definition acknowledge Code, 1 byte.
LVACK(byte) - Constructor for class com.ergotech.secs.LVACK: Create a new message from a byte data type.
LVACK(SecsFormat) - Constructor for class com.ergotech.secs.LVACK

M

main(String[]) - Static method in class com.ergotech.secs.NetLogger: Used for debugging only.
main(String[]) - Static method in class com.ergotech.secs.SyslogLogger
main(String[]) - Static method in class com.ergotech.transsecs.secs.Characterization
main(String[]) - Static method in class com.ergotech.vib.servers.fins.FinsPLC: Run the test cases by hand.
main(String[]) - Static method in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave: The Modbus Slave.
makeMatching() - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Makes a regular expression matching the entire response using the instance values.
makeMatching(String, String, String) - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Makes a regular expression matching the entire response.
Manipulator - Class in com.ergotech.vib.manipulators: This is the superclass of servers and components that generated data and can be written to.
Manipulator() - Constructor for class com.ergotech.vib.manipulators.Manipulator: Generic constructor.
manualCommand - Variable in class com.ergotech.vib.manipulators.spc.PidControl
MarqueeDeviceServer - Class in com.ergotech.vib.servers: This object is designed to work with the MarqueeServer.
MarqueeDeviceServer() - Constructor for class com.ergotech.vib.servers.MarqueeDeviceServer
MarqueeServer - Class in com.ergotech.vib.servers: This is an example of server for a device that can only have one controller server object for all intances of the data sources (which each has different parameters set).
MarqueeServer() - Constructor for class com.ergotech.vib.servers.MarqueeServer: The constructor will make sure there is a MarqueeDeviceServer created then set the default label and timebase.
MASTER_STATION_AREADY_IN_RING - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
MASTER_STATION_NOT_READY - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
MASTER_STATION_READY - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
MasterBooleanCalculator - Class in com.ergotech.vib.manipulators: This is a superclass for AND, OR, NOT,and XOR.
MasterBooleanCalculator() - Constructor for class com.ergotech.vib.manipulators.MasterBooleanCalculator: Generic Constructor.
MasterCalculator - Class in com.ergotech.vib.manipulators: This is a superclass for Add,Subtract, Multiply, and Divide, as well as the Bitwise Operations: AND, OR, XOR.
MasterCalculator() - Constructor for class com.ergotech.vib.manipulators.MasterCalculator: Generic Constructor.
MasterComparer - Class in com.ergotech.vib.manipulators: This is a superclass for Equal, NotEqual, GreaterThan, LessThan, LessThanOrEqual, and GreaterThanOrEqual.
MasterComparer() - Constructor for class com.ergotech.vib.manipulators.MasterComparer: Generic Constructor.
MasterMathConversions - Class in com.ergotech.vib.manipulators: This is a superclass for Abs, ReverseSign, Ceiling, Floor, and Round.
MasterMathConversions() - Constructor for class com.ergotech.vib.manipulators.MasterMathConversions: Generic Constructor.
MAX - Static variable in class com.ergotech.secs.MessageVerifierOneItem
max - Variable in class com.ergotech.vib.servers.ArrayDataSource: the maximum value of the random numbers
MAX31586Manipulator - Class in com.ergotech.vib.servers.raspi
MAX31586Manipulator() - Constructor for class com.ergotech.vib.servers.raspi.MAX31586Manipulator
MAX_CHAR_INPUT - Static variable in class com.ergotech.vib.ports.serial.SerialPortDevice
MAX_ERROR_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the maximum value for error events.
MAX_INFORMATION_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the maximum value for information events.
MAX_POLL_STATUS - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU needs poll.
MAX_STATE - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant MAX_STATE (COMMUNICATING).
MAX_STATE - Static variable in class com.ergotech.secs.gem.OnlineHandler: MAX_STATE value is REMOTE_ONLINE
MAX_WARNING_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the maximum value for warning events.
maxBlockSize - Static variable in class com.ergotech.vib.servers.fins.FinsServer: The maximum allowable block size for an address block.
maxCoils - Static variable in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
maxFluctuation - Variable in class com.ergotech.vib.servers.FloatFluxServer: The maximum (small) fluctuation when at the target level.
maxLength - Static variable in class com.ergotech.secs.ALTX
maxLength - Static variable in class com.ergotech.secs.SOFTREV
maxMessageLength - Static variable in class com.ergotech.secs.HSMSConnectionManager: The maximum length of messsage that we will accept.
maxRegisters - Static variable in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
maxRetryAttempts - Variable in class com.ergotech.secs.SecsMsg: If a SECS message timesout then it can be retried this number of times before being declared unsendable.
MDLN - Static variable in class com.ergotech.secs.gem.GemHandler
MDLN - Class in com.ergotech.secs: Equipment Model Type, 6 Bytes.
MDLN(String) - Constructor for class com.ergotech.secs.MDLN: Create a new message with ASCII (format 20) data.
MDLN(SecsFormat) - Constructor for class com.ergotech.secs.MDLN: Create a new message with data contained in a SecsFormat object.
MelsecDeviceServer - Class in com.ergotech.vib.servers.melsec: The device server for the Mitsubishi Q-Series (and A series?) PLC over Ethernet.
MelsecDeviceServer() - Constructor for class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Default constructor.
melsecDeviceServers - Static variable in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: We maintain a list of all instances of melsecDeviceServers which can be readily accessed when creating a list for the editor.
MelsecDInt - Class in com.ergotech.vib.servers.melsec
MelsecDInt() - Constructor for class com.ergotech.vib.servers.melsec.MelsecDInt: Create the Melsec Server.
MelsecFloat - Class in com.ergotech.vib.servers.melsec
MelsecFloat() - Constructor for class com.ergotech.vib.servers.melsec.MelsecFloat: Create the MelsecFloat.
MelsecServer - Class in com.ergotech.vib.servers.melsec: Server for Melsec
MelsecServer() - Constructor for class com.ergotech.vib.servers.melsec.MelsecServer: Default constructor.
MelsecString - Class in com.ergotech.vib.servers.melsec
MelsecString() - Constructor for class com.ergotech.vib.servers.melsec.MelsecString: Create the Melsec Server.
Message - Variable in class TransSECS.MessageNotifierEventArgs: The primary message.
MESSAGE_SEND_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a message cannot be sent.
MESSAGE_TIMEOUT_WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a message fails, but the system will automatically retry the message.
MessageBean - Class in com.ergotech.transsecs.secs: This component will send a message.
MessageBean() - Constructor for class com.ergotech.transsecs.secs.MessageBean: constructor
MessageDelegate - Class in TransSECS
MessageDelegate(MessageDelegate.Method) - Constructor for class TransSECS.MessageDelegate
MessageDelegate.Method - Interface in TransSECS
messageLog(String, int) - Method in class com.ergotech.vib.ports.PortDeviceServer: Logs informational/debug messages.
messageLog(String, int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: Logs informational/debug messages.
messageLog(String, int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: Logs informational/debug messages.
MessageNotifier - Interface in com.ergotech.transsecs.secs: This interface can be registered with the TransSECSController to receive notification of incoming messages.
MessageNotifierEventArgs - Class in TransSECS
MessageNotifierEventArgs() - Constructor for class TransSECS.MessageNotifierEventArgs
messageReceived(int, VIBMessageBean) - Method in interface com.ergotech.transsecs.secs.MessageNotifier: Called on a recieved message.
messageReceived(int, VIBMessageBean) - Method in class TransSECS.MessageReceiveNotifier: MessageNotifier interface
messageReceivedEvent(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.MessageBean: The "MessageReceived" event.
MessageReceiveNotifier - Class in TransSECS: Example of handing an unsolicited incoming message (Host Command)
MessageResponseInterface - Interface in com.ergotech.secs: This interface allows for the registration of an object to receive the response to a primary message.
MessageSpooledException - Exception in com.ergotech.secs
MessageSpooledException() - Constructor for exception com.ergotech.secs.MessageSpooledException
MessageSpooledException(String) - Constructor for exception com.ergotech.secs.MessageSpooledException
MessageSpooledException(String, int) - Constructor for exception com.ergotech.secs.MessageSpooledException
messageString(String) - Method in class com.ergotech.vib.manipulators.Emailer: Logs informational/debug messages.
messageTimeout(SecsMsg) - Method in interface com.ergotech.secs.UnrecoverableErrorInterface: This method is called on a T3 timeout.
MessageVerifier - Class in com.ergotech.secs: This class will store what it takes to verify a message to see if it's ok to be sent/received when the state of the equipment is online-local.
MessageVerifier() - Constructor for class com.ergotech.secs.MessageVerifier
MessageVerifierOneItem - Class in com.ergotech.secs: This object will verify that a message is allowed when the OnlineHandler is in ONLINE/LOCAL mode.
MessageVerifierOneItem(int, String, String) - Constructor for class com.ergotech.secs.MessageVerifierOneItem
MessageVerifierOneItem(int, int, String) - Constructor for class com.ergotech.secs.MessageVerifierOneItem
MEXP - Class in com.ergotech.secs: Message expected in the form SxxFyy where x is stream and y is function - Used in S9F13 This is a one string (Format 20) data structure
MEXP(String) - Constructor for class com.ergotech.secs.MEXP: Create a new message with ASCII (format 20) data.
MEXP(SecsFormat) - Constructor for class com.ergotech.secs.MEXP: Create a new message from a SecsFormat data type.
MF - Class in com.ergotech.secs: Material Format code, 1 Byte - Used in S3F2, F4, F5, F7, S16F11, 13, 15.
MF(byte) - Constructor for class com.ergotech.secs.MF: Create a new message from a byte data type.
MF(SecsFormat) - Constructor for class com.ergotech.secs.MF
MHEAD - Class in com.ergotech.secs: SECS message block header associated with message block in error - Used in S2F25, F26 This is a one byte binary (Format 10) data structure
MHEAD(byte[]) - Constructor for class com.ergotech.secs.MHEAD: Create a new message from an array of bytes.
MHEAD(SecsMsg) - Constructor for class com.ergotech.secs.MHEAD: Create a new message from a SecsMsg
MHEAD(SecsFormat) - Constructor for class com.ergotech.secs.MHEAD: Create a new message from a SecsFormat data type.
MicroLogixServer - Class in com.ergotech.vib.servers.ab: This is the abstract superclass of the Logix Ethernet protocol.
MicroLogixServer() - Constructor for class com.ergotech.vib.servers.ab.MicroLogixServer: Default constructor.
MID - Class in com.ergotech.secs: Material ID, 16 Bytes Max.
MID(String) - Constructor for class com.ergotech.secs.MID: Create a new message with ASCII (format 20) data.
MID(byte[]) - Constructor for class com.ergotech.secs.MID: Create a new message with ASCII (format 20) data.
MID(SecsFormat) - Constructor for class com.ergotech.secs.MID: Create a new message with data contained in a SecsFormat object.
min - Variable in class com.ergotech.vib.servers.ArrayDataSource: the minimum value of the random numbers
MIN_ERROR_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the minimum value for error events.
MIN_GEM_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the lowest GEM event.
MIN_INFORMATION_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the minimum value for information events.
MIN_OTHER_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the minimum value for user defined or other events.
MIN_WARNING_EVENT - Static variable in class com.ergotech.secs.SecsEvent: This is the minimum value for warning events.
minute - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
minute(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the minute of the hour.
MISSING_PARAMETER - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Some parameter is not yet set.
MixSecurityManager - Class in com.ergotech.vib.manipulators: This extension of a local security manager uses files stored on the MIX server to find the users and groups.
MixSecurityManager() - Constructor for class com.ergotech.vib.manipulators.MixSecurityManager
MMODE - Class in com.ergotech.secs: Matrix mode select, 1 Byte - Used in S7F15.
MMODE(byte) - Constructor for class com.ergotech.secs.MMODE: Create a new message from a byte data type.
MMODE(SecsFormat) - Constructor for class com.ergotech.secs.MMODE
Modbus0XServer - Class in com.ergotech.vib.servers.modbus: This is the implementation of the Modbus protocol.
Modbus0XServer() - Constructor for class com.ergotech.vib.servers.modbus.Modbus0XServer: Create the Modbus0XServer.
Modbus1XServer - Class in com.ergotech.vib.servers.modbus: This is the implementation of the Modbus protocol.
Modbus1XServer() - Constructor for class com.ergotech.vib.servers.modbus.Modbus1XServer: Create the Modbus1XServer.
ModbusArray - Class in com.ergotech.vib.servers.modbus
ModbusArray() - Constructor for class com.ergotech.vib.servers.modbus.ModbusArray: Create the Modbus Servers.
ModbusASCIIDeviceServer - Class in com.ergotech.vib.servers.modbus: This is the base for the ModbusASCIIDeviceServer.
ModbusASCIIDeviceServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusASCIIDeviceServer: The default constructor.
ModbusDataBlock - Class in com.ergotech.vib.servers.modbus: This subclass adds the destination address to the data block.
ModbusDataBlock(byte[], int, boolean) - Constructor for class com.ergotech.vib.servers.modbus.ModbusDataBlock: Create the block with the data and the destination address.
ModbusDeviceServerBase - Class in com.ergotech.vib.servers.modbus: This is the base for the ModbusTCPDeviceServer.
ModbusDeviceServerBase() - Constructor for class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase
modbusDeviceServers - Static variable in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: We maintain a list of all instances of ModbusDeviceServers which can be readily accessed when creating a list for the editor.
ModbusDInt - Class in com.ergotech.vib.servers.modbus
ModbusDInt() - Constructor for class com.ergotech.vib.servers.modbus.ModbusDInt: Create the Modbus Server.
ModbusFloat - Class in com.ergotech.vib.servers.modbus
ModbusFloat() - Constructor for class com.ergotech.vib.servers.modbus.ModbusFloat: Create the ModbusFloat.
ModbusInt - Class in com.ergotech.vib.servers.modbus
ModbusInt() - Constructor for class com.ergotech.vib.servers.modbus.ModbusInt: Create the Modbus Server.
ModbusPresetSingleRegisterServer - Class in com.ergotech.vib.servers.modbus: This is the implementation of the Modbus protocol.
ModbusPresetSingleRegisterServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusPresetSingleRegisterServer: Create the ModbusPresetSingleRegisterServer.
ModbusRTUDeviceServer - Class in com.ergotech.vib.servers.modbus: This component extends the ModbusRTUDeviceServerBase to add a Serial port to the object.
ModbusRTUDeviceServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: This sets the factory name.
ModbusRTUDeviceServerBase - Class in com.ergotech.vib.servers.modbus: This is the base for the ModbusTCPDeviceServer.
ModbusRTUDeviceServerBase() - Constructor for class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServerBase: The default constructor.
ModbusRTUOverBlueToothDeviceServer - Class in com.ergotech.vib.servers.modbus: This component extends the ModbusRTUDeviceServerBase to add a BlueTooth port to the object.
ModbusRTUOverBlueToothDeviceServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer: This sets the factory name.
ModbusRTUOverTCPDeviceServer - Class in com.ergotech.vib.servers.modbus: This component extends the ModbusRTUDeviceServerBase to add the ability to communicate with ModbusRTU over a TCP connection.
ModbusRTUOverTCPDeviceServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: This sets the factory name.
ModbusRTUSlave - Class in com.ergotech.vib.servers.modbus.slave: This beans implements the slave side of a Modbus RTU connection.
ModbusRTUSlave() - Constructor for class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: The default constructor.
ModbusServer - Class in com.ergotech.vib.servers.modbus: This is the implementation of the Modbus protocol.
ModbusServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusServer: Create the ModbusServer.
ModbusSlave - Class in com.ergotech.vib.servers.modbus.slave: This beans implements the slave side of a Modbus TCP connection.
ModbusSlave() - Constructor for class com.ergotech.vib.servers.modbus.slave.ModbusSlave
ModbusSlaveBase - Class in com.ergotech.vib.servers.modbus.slave: This beans implements the slave side of a Modbus connection.
ModbusSlaveBase() - Constructor for class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
ModbusString - Class in com.ergotech.vib.servers.modbus
ModbusString() - Constructor for class com.ergotech.vib.servers.modbus.ModbusString: Create the Modbus Server.
ModbusStringArray - Class in com.ergotech.vib.servers.modbus
ModbusStringArray() - Constructor for class com.ergotech.vib.servers.modbus.ModbusStringArray: Create the Modbus Server.
ModbusTCPDeviceServer - Class in com.ergotech.vib.servers.modbus: This component extends the ModbusTCPDeviceServerBase to add an Active TCP port to the object.
ModbusTCPDeviceServer() - Constructor for class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: This sets the factory name.
ModbusTCPDeviceServerBase - Class in com.ergotech.vib.servers.modbus: This is the base for the ModbusTCPDeviceServer.
ModbusTCPDeviceServerBase() - Constructor for class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase: The default constructor.
modifiedCoils(BlockProcessImage) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
modifiedRegisters(BlockProcessImage) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
Monitor - Class in com.ergotech.secs.gem: This will describe a monitor for a VID.
Monitor() - Constructor for class com.ergotech.secs.gem.Monitor: Creates the Monitor.
MONITOR_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an monitor is reregistered or changed.
MONITOR_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an monitor is triggered The source will be the Monitor object.
MONITOR_TRIGGERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an limit is monitor.
monitors - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of all the condition monitors.
month - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
month(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the month.
MqttPersistentConfig - Class in com.ergotech.transsecs.secs
MqttWrapper - Class in com.ergotech.vib.servers.mqttwrapper
MqttWrapper() - Constructor for class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Default constructor.
MqttWrapper.SecsFormat00PayloadDecoder - Class in com.ergotech.vib.servers.mqttwrapper: Decode a JSON SecsFormat00 input.
MqttWrapper.TriggerPayloadDecoder - Class in com.ergotech.vib.servers.mqttwrapper: Decode a (potentially) JSON trigger input.
MsgManager - Interface in com.ergotech.secs
MUCH_HIGHER - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
MUCH_LOWER - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
MULTI_BLOCK_REJECT - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a multi-block request is rejected.
MULTI_THREADED - Static variable in class com.ergotech.secs.SessionManager
MultiBlockRequest - Class in com.ergotech.secs
MultiBlockRequest() - Constructor for class com.ergotech.secs.MultiBlockRequest
MultiLogger - Class in com.ergotech.transsecs.secs: This is a logger for SECS that can contain other loggers.
Multiply - Class in com.ergotech.vib.manipulators: Calculates the multiplication product of two numbers.
Multiply() - Constructor for class com.ergotech.vib.manipulators.Multiply: Constructor.

N

n2sort(ComparableInterface, Object[]) - Static method in class com.ergotech.vib.utils.Utils: This is used for easy subclassing if we want to sort.
n2sort(ComparableInterface, Vector) - Static method in class com.ergotech.vib.utils.Utils: This is used for easy subclassing if we want to sort.
n2sortConnectors() - Method in class com.ergotech.vib.servers.DataSource: Sort the Connectors according to their priority ordering.
NAK - Static variable in class com.ergotech.secs.SecsIConnectionManager
NAK - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: NAK - 0xF
NAK - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: NAK - 0x15
NAK_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a NAK is received (SECSI only).
NAK_RR - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU NAK Error - No resources.
NAK_RR - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
NAK_RS - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU NAK Error - No service activated.
NAK_RS - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
NAK_WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a NAK is received (SECSI only).
name - Variable in class com.ergotech.secs.CPNAMEVALPAIR
name - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable: the name associated with this ID.
name - Variable in class com.ergotech.secs.VidVPair
NAME - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The property name for the name (presumably of the source).
nameData - Variable in class com.ergotech.vib.servers.SimpleDataSource.NameEditorData
NameEditorData(String, List<String>) - Constructor for class com.ergotech.vib.servers.SimpleDataSource.NameEditorData
NameEditorData(String) - Constructor for class com.ergotech.vib.servers.SimpleDataSource.NameEditorData
NEEDS_POLL - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU needs poll.
needsHostConnection - Variable in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: Whether we should continue to accept messages from the "hostWrapper" even if the "equipmentWrapper" has closed.
NetLogger - Class in com.ergotech.secs: A logger object that logs to the syslog.
NetLogger(String, String, int) - Constructor for class com.ergotech.secs.NetLogger
newInstance(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Returns a new instance of a class with the given name in the class package of this controller.
NO_ERROR - Static variable in class com.ergotech.secs.SecsMsg: Indicates that the transaction completed successfully and that both the request and response message are valid.
NO_ERROR - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: Indicates that the transaction completed successfully and that both the request and response message are valid.
NO_ERROR - Static variable in class com.ergotech.vib.ports.PortDeviceServer: No Error.
NO_EXPORT - Static variable in class com.ergotech.vib.servers.SimpleDataSource: Don't export this instance to, for example, OPC.
NO_OPTIONS - Static variable in class com.ergotech.transsecs.secs.Base64: No options specified.
NO_PORT - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Port does not exist.
NO_RESOURCES - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Out of resources.
NONE - Variable in class com.ergotech.secs.gem.Monitor: Constant for NONE (0).
NONE - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
NOSWAP - Static variable in class com.ergotech.vib.servers.plc.PLCServer: Definition for point swap style.
Not - Class in com.ergotech.vib.manipulators: Returns the boolean NOT of the input.
Not() - Constructor for class com.ergotech.vib.manipulators.Not: Generic Constructor.
NOT_APPROPRIATE - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
NOT_COMMUNICATING - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant NOT_COMMUNICATING.
NOT_COMMUNICATION_MESSAGE_BLOCKED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the state is non-communicating and a message that isn't allowed is attempted to be sent.
NOTEQUAL - Variable in class com.ergotech.secs.gem.Monitor: Constant for NOTEQUAL (5).
NOTEQUAL - Static variable in class com.ergotech.secs.MessageVerifierOneItem
NotEqual - Class in com.ergotech.vib.manipulators: Compares the two inputs as not equal.
NotEqual() - Constructor for class com.ergotech.vib.manipulators.NotEqual: Generic Constructor.
notifyReceive() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Update all listeners to indicate that the message has been received.
NUMBER_OF_PARAMETERS - Static variable in class com.ergotech.vib.manipulators.array.ArrayBuilder
NumberObjectValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
NumberObjectValueObject() - Constructor for class com.ergotech.vib.valueobjects.NumberObjectValueObject: The default constructor.
NumberObjectValueObject(Number, int, Date, Color) - Constructor for class com.ergotech.vib.valueobjects.NumberObjectValueObject: Creates a value object with the current Number value, the color associated with that value (newColor) and the quality.
NumberObjectValueObject(Number, int, Date) - Constructor for class com.ergotech.vib.valueobjects.NumberObjectValueObject: Creates a value object with the current Number value, the color associated with that value (newColor) and QUALITY_GOOD.
NumberObjectValueObject(Number, int) - Constructor for class com.ergotech.vib.valueobjects.NumberObjectValueObject: Creates a value object with the current Number value, the color associated with that value (newColor) and QUALITY_GOOD.
NumberObjectValueObject(Number) - Constructor for class com.ergotech.vib.valueobjects.NumberObjectValueObject: Creates a value object with the current value, a null color and QUALITY_GOOD.

O

OBJECTTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
OBJID - Class in com.ergotech.secs
OBJID(String) - Constructor for class com.ergotech.secs.OBJID: Create a new message with ASCII (format 20) data.
OBJID(long) - Constructor for class com.ergotech.secs.OBJID: Create a new message with an 8-Byte integer (SecsFormat50).
OBJID(byte) - Constructor for class com.ergotech.secs.OBJID: Create a new message with an 1-Byte integer (SecsFormat51).
OBJID(short) - Constructor for class com.ergotech.secs.OBJID: Create a new message with an 2-Byte integer (SecsFormat52).
OBJID(int) - Constructor for class com.ergotech.secs.OBJID: Create a new message with an 4-Byte integer (SecsFormat54).
OBJID(SecsFormat) - Constructor for class com.ergotech.secs.OBJID: Create a new message with the data contained in a SecsFormat object.
OBJSPEC - Class in com.ergotech.secs: OBJSPEC.
OBJSPEC(String) - Constructor for class com.ergotech.secs.OBJSPEC: Create a new message with ASCII (format 20) data.
OBJSPEC(SecsFormat) - Constructor for class com.ergotech.secs.OBJSPEC: Create a new message with the data contained in a SecsFormat object.
OBJTOKEN - Class in com.ergotech.secs: OBJTOKEN.
OBJTOKEN(int) - Constructor for class com.ergotech.secs.OBJTOKEN: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
OBJTOKEN(SecsFormat) - Constructor for class com.ergotech.secs.OBJTOKEN: Create a new message with the data contained in a SecsFormat object.
OBJTYPE - Class in com.ergotech.secs
OBJTYPE(String) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with ASCII (format 20) data.
OBJTYPE(long) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with an 8-Byte integer (SecsFormat50).
OBJTYPE(byte) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with an 1-Byte integer (SecsFormat51).
OBJTYPE(short) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with an 2-Byte integer (SecsFormat52).
OBJTYPE(int) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with an 4-Byte integer (SecsFormat54).
OBJTYPE(SecsFormat) - Constructor for class com.ergotech.secs.OBJTYPE: Create a new message with the data contained in a SecsFormat object.
OCTAL_REG - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as hex or decimal.
OFLACK - Class in com.ergotech.secs
OFLACK(int) - Constructor for class com.ergotech.secs.OFLACK
OFLACK(SecsFormat) - Constructor for class com.ergotech.secs.OFLACK
oldError - Variable in class com.ergotech.vib.manipulators.spc.PidControl
oldSP - Variable in class com.ergotech.vib.manipulators.spc.PidControl
ONLACK - Class in com.ergotech.secs
ONLACK(int) - Constructor for class com.ergotech.secs.ONLACK
ONLACK(SecsFormat) - Constructor for class com.ergotech.secs.ONLACK
onlineHandler - Variable in class com.ergotech.secs.gem.GemHandler: The online handler.
OnlineHandler - Class in com.ergotech.secs.gem: This will control the online/offline state of the machine.
OnlineHandler() - Constructor for class com.ergotech.secs.gem.OnlineHandler: The default constructor.
OnlineHandler(String, int) - Constructor for class com.ergotech.secs.gem.OnlineHandler: Creates the handler with the specified initial state.
onlineOfflineStateValueInput(ValueChangedEvent) - Method in class com.ergotech.secs.gem.OnlineHandler: This is an input that can be used to control the current online/offline state.
OPEN_PORT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted whenever a error occurs opening a port that cannot be described more precisely.
operation - Variable in class com.ergotech.vib.manipulators.MasterBooleanCalculator: The integer value for the requested operation.
operation - Variable in class com.ergotech.vib.manipulators.MasterCalculator: The integer value for the requested operation.
operation - Variable in class com.ergotech.vib.manipulators.MasterComparer: The integer value for the requested operation.
operation - Variable in class com.ergotech.vib.manipulators.MasterMathConversions: The integer value for the requested operation.
OPID - Class in com.ergotech.secs: Operation ID.
OPID(long) - Constructor for class com.ergotech.secs.OPID: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
OPID(byte) - Constructor for class com.ergotech.secs.OPID: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
OPID(short) - Constructor for class com.ergotech.secs.OPID: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
OPID(int) - Constructor for class com.ergotech.secs.OPID: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
OPID(SecsFormat) - Constructor for class com.ergotech.secs.OPID: Create a new message with the data contained in a SecsFormat object.
Or - Class in com.ergotech.vib.manipulators: Calculates the boolean OR of two inputs.
Or() - Constructor for class com.ergotech.vib.manipulators.Or: Generic Constructor.
ORDER - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used by the Connection Manager to add an order to the values for the client.
outByteSwap(int, int, byte[], int) - Static method in class com.ergotech.vib.servers.melsec.MelsecServer: This method will swap the bytes in the value according to the swap format.
outByteSwap(int, int, byte[], int) - Static method in class com.ergotech.vib.servers.plc.PLCServer: This method will swap the bytes in the value according to the swap format.
OutputStream(OutputStream) - Constructor for class com.ergotech.transsecs.secs.Base64.OutputStream: Constructs a Base64#OutputStream in ENCODE mode.
OutputStream(OutputStream, int) - Constructor for class com.ergotech.transsecs.secs.Base64.OutputStream: Constructs a Base64#OutputStream in either ENCODE or DECODE mode.

P

P - Variable in class com.ergotech.vib.manipulators.spc.PidControl
packetCount - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The number of packets that have been read or written, or a useful unique packet ID, depends on how you look at it.
padFlag - Variable in class com.ergotech.vib.manipulators.ConvertToHex
PARAMS - Static variable in class com.ergotech.vib.manipulators.array.ArrayBuilder: Name of the inputs.
parseCarrierSlotData(SecsFormat00) - Method in class com.ergotech.secs.CarrierSlotData
ParseException - Exception in com.ergotech.transsecs.secs: This exception is thrown when parse errors are encountered.
ParseException(String, int, int) - Constructor for exception com.ergotech.transsecs.secs.ParseException: Constructor.
parseMAX31856(byte[]) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
parseMIDArray(SecsFormat00) - Static method in class com.ergotech.secs.CarrierSlotData: Provides Constructor to parse from Secs Format returns null for an empty list.
parseString(String) - Method in class com.ergotech.vib.manipulators.PropertyFilter: This will parse a string.
PASSIVE_ID - Static variable in class com.ergotech.secs.HSMSSocketManager: The id we use for passive connections.
PASSIVE_PORT - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The equipment port.
PASSIVE_SOCKET - Static variable in class com.ergotech.vib.ports.TCPPassiveSocket: The string used to identify a port.
PASSIVE_SOCKET - Static variable in class com.ergotech.vib.ports.UDPPassiveSocket: The string used to identify a port.
PassivePortPool(String, TCPPassivePortFactory) - Constructor for class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool: Create the pool for the given factory and port name.
passivePortValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the port value.
passiveT1ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t1 value.
passiveT2ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t2 value.
passiveT3ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t3 value.
passiveT4ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t4 value.
passiveT5ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t5 value.
passiveT6ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t6 value.
passiveT7ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t7 value.
passiveT8ValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set the t8 value.
PassOnThread - Class in com.ergotech.vib.manipulators: This, like a broadcast server will take a value and send it to any connectors.
PassOnThread() - Constructor for class com.ergotech.vib.manipulators.PassOnThread
PassThroughMessageHandler - Class in com.ergotech.secs
PassThroughMessageHandler(WrapperInterface, WrapperInterface, int) - Constructor for class com.ergotech.secs.PassThroughMessageHandler: This constructor creates the message handler with sufficient information to make the pass through.
PASSWORD_DIGEST - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The property name for the current password digest.
PCCCRegisteredPortFactory - Class in com.ergotech.vib.servers.ab: This will wrap a serial port and allow us to read and write to it as a port interface.
PCCCRegisteredPortFactory(String) - Constructor for class com.ergotech.vib.servers.ab.PCCCRegisteredPortFactory: Create the port factory with a specific name.
PCCCRegisteredSocket - Class in com.ergotech.vib.servers.ab: This will wrap a socket.
PCCCRegisteredSocket(String) - Constructor for class com.ergotech.vib.servers.ab.PCCCRegisteredSocket: Create the socket.
PDU_HEADER_OFFSET - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The header offset in a PDU response message.
PERCENT_STYLE - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: Used to determine if the register was set as %MW (Premium style).
permissiveLocalOnlineMessageVerification - Variable in class com.ergotech.secs.gem.OnlineHandler: if this flag is true, then all messages are permitted in local-online unless specifically excluded.
persistenceValueChanged(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Set to true to persist the GEM model
PFCD - Class in com.ergotech.secs: Prefdefined form code, 1 byte - Used in S6F9 This is a one byte binary (Format 10) data structure
PFCD(byte[]) - Constructor for class com.ergotech.secs.PFCD: Create a new message from an array of bytes.
PFCD(SecsFormat) - Constructor for class com.ergotech.secs.PFCD: Create a new message from a SecsFormat data type.
PidControl - Class in com.ergotech.vib.manipulators.spc: Maintains the process in which the process input is manipulated in such a way that the process output value is being moved toward the given set point.
PidControl() - Constructor for class com.ergotech.vib.manipulators.spc.PidControl
PIDExecution - Variable in class com.ergotech.vib.manipulators.spc.PidControl
playSound(String) - Method in class com.ergotech.vib.manipulators.SoundClipPlayer: Plays the sound.
PLCAddressBlock - Class in com.ergotech.vib.servers.plc: This is the address block for the PLC protocol.
PLCAddressBlock(PLCServer) - Constructor for class com.ergotech.vib.servers.plc.PLCAddressBlock: Constructor.
PLCArray - Class in com.ergotech.vib.servers.plc
PLCArray() - Constructor for class com.ergotech.vib.servers.plc.PLCArray: Create the Servers.
PLCDataBlock - Class in com.ergotech.vib.servers.plc
PLCDataBlock() - Constructor for class com.ergotech.vib.servers.plc.PLCDataBlock: This will create an empty data block with an offset and length of zero and null data.
PLCDataBlock(byte[]) - Constructor for class com.ergotech.vib.servers.plc.PLCDataBlock: This will create a data block with an offset of zero and a length of the total length of the data.
PLCDataBlock(byte[], int, int) - Constructor for class com.ergotech.vib.servers.plc.PLCDataBlock: This will create a data block with the specified offset and a length.
PLCDeviceServer - Class in com.ergotech.vib.servers.plc: The PLC Device Server provides the actual communication to the PLC device.
PLCDeviceServer() - Constructor for class com.ergotech.vib.servers.plc.PLCDeviceServer: The default constructor.
PLCException - Exception in com.ergotech.vib.servers.plc: This exception can be used to encapsulate all possible exceptions that might occur in dealing with a PLC.
PLCException(Exception) - Constructor for exception com.ergotech.vib.servers.plc.PLCException: Create this exception with its encapsulated exception.
PLCException(String) - Constructor for exception com.ergotech.vib.servers.plc.PLCException: Create this exception with a simple message.
PLCException(String, int, int) - Constructor for exception com.ergotech.vib.servers.plc.PLCException: Create this exception with a message code and subcode.
PLCServer - Class in com.ergotech.vib.servers.plc: This is the abstract superclass of the PLC protocol.
PLCServer() - Constructor for class com.ergotech.vib.servers.plc.PLCServer: Create the PLCServer.
PODEVENT - Class in com.ergotech.secs: PODEVENT.
PODEVENT(byte) - Constructor for class com.ergotech.secs.PODEVENT: Create a new message with an 1-Byte integer (SecsFormat51).
PODEVENT(SecsFormat) - Constructor for class com.ergotech.secs.PODEVENT: Create a new message with the data contained in a SecsFormat object.
POLL_COMPLETE - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU needs poll.
populateServer() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Add all existing tags to the wrapper.
populateServer(Object) - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Recursively add all existing tags in the given container to the wrapper.
populateServer(Object, String) - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Iterate through the instance in the container and sub-containers and fill the OPC Server.
populateServer() - Method in class com.ergotech.vib.servers.rest.RestWrapper: Add all existing tags to the wrapper.
populateServer(Object) - Method in class com.ergotech.vib.servers.rest.RestWrapper: Recursively add all existing tags in the given container to the wrapper.
PopupInitializer - Class in com.ergotech.vib.manipulators: This component is used to initialize a popup.
PopupInitializer() - Constructor for class com.ergotech.vib.manipulators.PopupInitializer: Creates the string to array.
PopupInitializer.ConnectableDataSource - Class in com.ergotech.vib.manipulators
popupLogger - Static variable in class com.ergotech.vib.servers.DataSource: This is the logger for this component.
popupMessage(String) - Static method in class com.ergotech.vib.servers.DataSource: Logs error messages.
Port - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
Port() - Constructor for class com.ergotech.vib.ports.Port
port - Static variable in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
PORT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when there is a critical error with the port.
PORT_ERROR - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Some error with the open port.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.ports.serial.SerialPortDevice: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The name of the port factory.
PORT_FACTORY_NAME - Static variable in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: The name of the port factory.
PORT_IN_USE_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when an attempt is made to open a port that is already in use.
PORT_INFO - Static variable in class com.ergotech.secs.SecsEvent: This event provides some information about changing port status.
PORT_WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a non-critical error occurs on a port.
PortDeviceServer - Class in com.ergotech.vib.ports: The PLC Device Server provides the actual communication to the PLC device.
PortDeviceServer() - Constructor for class com.ergotech.vib.ports.PortDeviceServer: The default constructor.
PortFactory - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
PortFactory(String) - Constructor for class com.ergotech.vib.ports.PortFactory
PortFactoryInterface - Interface in com.ergotech.vib.ports: This object will keep track of pools of ports.
PortFactoryManager - Class in com.ergotech.vib.ports: This object will keep track of port factories.
PortFactoryManager() - Constructor for class com.ergotech.vib.ports.PortFactoryManager
PortInputStream - Class in com.ergotech.vib.ports
PortInputStream(PortInterface) - Constructor for class com.ergotech.vib.ports.PortInputStream
PortInterface - Interface in com.ergotech.vib.ports: This interface can wrap any type of port.
PortManager - Class in com.ergotech.secs
portManagerFactoryClass - Static variable in class com.ergotech.secs.SecsIWrapper: The port manager factory class.
PortOutputStream - Class in com.ergotech.vib.ports
PortOutputStream(PortInterface) - Constructor for class com.ergotech.vib.ports.PortOutputStream
PortPool - Class in com.ergotech.vib.ports: The port pool keeps track of a pool of ports.
PortPoolInterface - Interface in com.ergotech.vib.ports: The port pool keeps track of a pool of ports.
ports - Variable in class com.ergotech.vib.servers.SimpleDataSource.NameEditorData
post(Object, int, int, String, int) - Static method in class com.ergotech.secs.SecsEvent: This will create a new SecsEvent and post it.
post(Object, int, int, String, Object, int) - Static method in class com.ergotech.secs.SecsEvent: This will create a new SecsEvent and post it.
post(Object, int, String, int) - Static method in class com.ergotech.secs.SecsEvent: This will create a new SecsEvent and post it.
post(Object, int, String, Object, int) - Static method in class com.ergotech.secs.SecsEvent: This will create a new SecsEvent and post it.
post() - Method in class com.ergotech.secs.SecsEvent: This will post this event to the default event handler.
post(SecsEventHandler) - Method in class com.ergotech.secs.SecsEvent: This will post this event to the default event handler.
post(SecsEvent) - Method in class com.ergotech.secs.SecsEventHandler: This will take a new event, and notify all listeners before returning.
post(VIBEvent) - Method in class com.ergotech.vib.servers.DataSource: The "post" method will call VIBEvent on all relevant objects, that is, our connectors.
PPBODY - Class in com.ergotech.secs: Process Program Grant (PPBODY) Data Decoder, used in S7F3, S7F6 and S7F36.
PPBODY(String) - Constructor for class com.ergotech.secs.PPBODY
PPBODY(byte[]) - Constructor for class com.ergotech.secs.PPBODY: Create a new message with binary (format 10) data.
PPBODY(SecsFormat) - Constructor for class com.ergotech.secs.PPBODY: Create a new message with data contained in a SecsFormat object.
PPGNT - Class in com.ergotech.secs: Process Program Grant (PPGNT) Data Decoder, used in S7F2, and S7F30.
PPGNT(byte[]) - Constructor for class com.ergotech.secs.PPGNT: Create a new message with binary (format 10) data.
PPGNT(SecsFormat) - Constructor for class com.ergotech.secs.PPGNT: Create a new message with data contained in a SecsFormat object.
PPID - Class in com.ergotech.secs: Process Program ID (PPID) Data Decoder, used in S2F27, most of S7 and S9F13.
PPID(byte[]) - Constructor for class com.ergotech.secs.PPID: Create a new message with binary (format 10) data.
PPID(String) - Constructor for class com.ergotech.secs.PPID: Create a new message with ASCII (format 20) data.
PPID(SecsFormat) - Constructor for class com.ergotech.secs.PPID: Create a new message with data contained in a SecsFormat object.
PPIDataBlock - Class in com.ergotech.vib.servers.ppi: This subclass adds the destination address to the data block.
PPIDataBlock(byte[], byte) - Constructor for class com.ergotech.vib.servers.ppi.PPIDataBlock: Create the block with the data and the destination address.
PPIDeviceServer - Class in com.ergotech.vib.servers.ppi
PPIDeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.PPIDeviceServer: Default constructor.
PPIDeviceServerBase - Class in com.ergotech.vib.servers.ppi
PPIDeviceServerBase() - Constructor for class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: Default constructor.
ppiDeviceServers - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: We maintain a list of all instances of ppiDeviceServers which can be readily accessed when creating a list for the editor.
PPIServer - Class in com.ergotech.vib.servers.ppi: This is the abstract superclass of the PPI protocol.
PPIServer() - Constructor for class com.ergotech.vib.servers.ppi.PPIServer: Default constructor.
PRCMDNAME - Class in com.ergotech.secs: PRCMDNAME.
PRCMDNAME(String) - Constructor for class com.ergotech.secs.PRCMDNAME: Create a new message with a String (SecsFormat20).
PRCMDNAME(char[]) - Constructor for class com.ergotech.secs.PRCMDNAME
PRCMDNAME(SecsFormat20) - Constructor for class com.ergotech.secs.PRCMDNAME
PRCMDNAME(SecsFormat) - Constructor for class com.ergotech.secs.PRCMDNAME: Create a new message with the data contained in a SecsFormat object.
prefixString - Variable in class com.ergotech.vib.manipulators.ConvertToHex
preparingServer(SimpleDataSource) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: An opportunity for a subclass to configure a server that is being prepared.
prependString(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.CombineStrings: This method will be called to set the pre-pended string.
PREVENTID - Class in com.ergotech.secs: PREVENTID.
PREVENTID(long) - Constructor for class com.ergotech.secs.PREVENTID: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
PREVENTID(byte) - Constructor for class com.ergotech.secs.PREVENTID: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
PREVENTID(short) - Constructor for class com.ergotech.secs.PREVENTID: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
PREVENTID(int) - Constructor for class com.ergotech.secs.PREVENTID: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
PREVENTID(SecsFormat) - Constructor for class com.ergotech.secs.PREVENTID: Create a new message with the data contained in a SecsFormat object.
PRIMARYOUTPORTNAME - Static variable in class com.ergotech.vib.servers.DataSource: The default name for the primary outport.
printArray(String, byte[]) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: Prints the array passed in.
printException(Throwable) - Method in class com.ergotech.vib.ports.PortDeviceServer: Print the exceptions.
printException(Throwable) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Print the exceptions.
println(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Prints out the provided string.
println(String) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Prints out the provided string.
printStackTrace(PrintStream) - Method in exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Prints the stream for the embedded exception if there is one.
PRJOBID - Class in com.ergotech.secs: PRJOBID.
PRJOBID(String) - Constructor for class com.ergotech.secs.PRJOBID: Create a new message with a String (SecsFormat20).
PRJOBID(char[]) - Constructor for class com.ergotech.secs.PRJOBID
PRJOBID(SecsFormat20) - Constructor for class com.ergotech.secs.PRJOBID
PRJOBID(SecsFormat) - Constructor for class com.ergotech.secs.PRJOBID: Create a new message with the data contained in a SecsFormat object.
PRJOBMILESTONE - Class in com.ergotech.secs: PRJOBMILESTONE.
PRJOBMILESTONE(long) - Constructor for class com.ergotech.secs.PRJOBMILESTONE: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
PRJOBMILESTONE(byte) - Constructor for class com.ergotech.secs.PRJOBMILESTONE: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
PRJOBMILESTONE(short) - Constructor for class com.ergotech.secs.PRJOBMILESTONE: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
PRJOBMILESTONE(int) - Constructor for class com.ergotech.secs.PRJOBMILESTONE: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
PRJOBMILESTONE(SecsFormat) - Constructor for class com.ergotech.secs.PRJOBMILESTONE: Create a new message with the data contained in a SecsFormat object.
PRJOBSPACE - Class in com.ergotech.secs: PRJOBSPACE.
PRJOBSPACE(short) - Constructor for class com.ergotech.secs.PRJOBSPACE: Create a new message with a short (SecsFormat51).
PRJOBSPACE(int) - Constructor for class com.ergotech.secs.PRJOBSPACE
PRJOBSPACE(byte) - Constructor for class com.ergotech.secs.PRJOBSPACE
PRJOBSPACE(SecsFormat) - Constructor for class com.ergotech.secs.PRJOBSPACE: Create a new message with the data contained in a SecsFormat object.
PRMTRLORDER - Class in com.ergotech.secs: PRMTRLORDER.
PRMTRLORDER(short) - Constructor for class com.ergotech.secs.PRMTRLORDER: Create a new message with a short (SecsFormat51).
PRMTRLORDER(int) - Constructor for class com.ergotech.secs.PRMTRLORDER
PRMTRLORDER(byte) - Constructor for class com.ergotech.secs.PRMTRLORDER
PRMTRLORDER(SecsFormat) - Constructor for class com.ergotech.secs.PRMTRLORDER: Create a new message with the data contained in a SecsFormat object.
processMessage(SecsTrigger) - Method in class com.ergotech.secs.gem.CommunicationsHandler: this method will make sure that we will not forward any messages if we are DISABLEDS or NOT_COMMUNICATING.
processMessage(SecsTrigger) - Method in class com.ergotech.secs.gem.EventOutSpooler: This method will find the response message and halt it's processing.
processMessage(SecsTrigger) - Method in class com.ergotech.secs.gem.EventSpooler: Check all incoming messages for primaries that require a response.
processMessage(SecsTrigger) - Method in class com.ergotech.secs.gem.OnlineHandler: All messages will go through here.
processMessage(SecsTrigger) - Method in class com.ergotech.secs.PassThroughMessageHandler: All messages will come through this method
processMessage(SecsTrigger) - Method in class com.ergotech.secs.TransactionManager: Check all incoming messages for primaries that require a response.
processMessage(SecsMsg) - Method in class com.ergotech.transsecs.secs.FileRecipeManager: This method handles S7F3 (Process Program Send), S7F5 (Process Program Request), S7F17 (Process Program Delete), and S7F19 (Current EPPD Request).
processMessage(SecsMsg) - Method in interface com.ergotech.transsecs.secs.RecipeManagerInterface: This method should return true if the message is handled, otherwise false.
processMessage(SecsMsg) - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Process the response to the sent message - if any.
processMessage(SecsTrigger) - Method in class com.ergotech.transsecs.secs.TransSecsController: Process the message.
processMessage(SecsMsg, int) - Method in class com.ergotech.transsecs.secs.TransSecsController: Iterate through the messages.
processMessage(SecsMsg, SessionManager) - Method in class com.ergotech.transsecs.secs.TransSecsController: Process the message and send it to the appropriate wrapper.
processMessage(SecsTrigger) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Calls the super-classes processMessage and returns true.
processMessage(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Process the response to the sent message - if any.
processMessage(SecsTrigger) - Method in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: All messages will come through this method
processMessage(SecsMsg, WrapperInterface) - Method in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: Process the message and send it to the appropriate wrapper.
processMessageFromEquipment(SecsMsg) - Method in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: Process the message and send it to the appropriate wrapper.
processMessageFromHost(SecsMsg) - Method in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: Process the message and send it to the appropriate wrapper.
processSelf(Object) - Method in class com.ergotech.secs.S1F13: This method overrides the SecsMsg method.
processSelf(Object) - Method in class com.ergotech.secs.S1F14: This method overrides the SecsMsg method.
processSelf(Object) - Method in class com.ergotech.secs.SecsMsg: Calls the message handle object.
processSelf(Object) - Method in class com.ergotech.secs.SecsTrigger: Calls the message handle object.
propertyChange(PropertyChangeEvent) - Method in class com.ergotech.vib.servers.plc.PLCServer: This will be called whenever the name of the device server that we are attached to changes.
PropertyFilter - Class in com.ergotech.vib.manipulators: The PropertyFilter changes one or more properties of the input ValueObject.
PropertyFilter() - Constructor for class com.ergotech.vib.manipulators.PropertyFilter: Generic Constructor, Color set to null in currentValue.
PROPERTYTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
PropertyValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is designed to send property info to a bean, but without sending a new value.
PropertyValueObject() - Constructor for class com.ergotech.vib.valueobjects.PropertyValueObject: The default constructor.
PROTO_ID - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The protocol ID.
PRPAUSEEVENT - Class in com.ergotech.secs: PRPAUSEEVENT.
PRPAUSEEVENT(int[]) - Constructor for class com.ergotech.secs.PRPAUSEEVENT: Create a new message with a String (SecsFormat20).
PRPAUSEEVENT(ATTRDATA[]) - Constructor for class com.ergotech.secs.PRPAUSEEVENT
PRPAUSEEVENT(SecsFormat) - Constructor for class com.ergotech.secs.PRPAUSEEVENT
PRPROCESSSTART - Class in com.ergotech.secs: Data value.
PRPROCESSSTART(byte) - Constructor for class com.ergotech.secs.PRPROCESSSTART: Create the object from a binary data type (format 11).
PRPROCESSSTART(boolean) - Constructor for class com.ergotech.secs.PRPROCESSSTART: Create a new message with Boolean (SecsFormat11) data.
PRPROCESSSTART(SecsFormat) - Constructor for class com.ergotech.secs.PRPROCESSSTART: Create a new message with the data contained in a SecsFormat object.
PRRECIPEMETHOD - Class in com.ergotech.secs: PRRECIPEMETHOD, indicates the recipe specification type, whether tuning is used and which method is used.
PRRECIPEMETHOD(int) - Constructor for class com.ergotech.secs.PRRECIPEMETHOD: Create a new message with a String (SecsFormat20).
PRRECIPEMETHOD(SecsFormat) - Constructor for class com.ergotech.secs.PRRECIPEMETHOD: Create a new message with the data contained in a SecsFormat object.
PRSTATE - Class in com.ergotech.secs: PRSTATE.
PRSTATE(short) - Constructor for class com.ergotech.secs.PRSTATE: Create a new message with a short (SecsFormat51).
PRSTATE(int) - Constructor for class com.ergotech.secs.PRSTATE
PRSTATE(byte) - Constructor for class com.ergotech.secs.PRSTATE
PRSTATE(SecsFormat) - Constructor for class com.ergotech.secs.PRSTATE: Create a new message with the data contained in a SecsFormat object.
publish(String, SecsFormat) - Method in class com.ergotech.transsecs.secs.PublishBean: Pass through to publish ( tagName, value, true).
publish(String, SecsFormat, boolean) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish a SecsFormat.
publish(String, String) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, byte[]) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, byte) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, short) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, int) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, long) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, float) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, double) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish the data from received messages.
publish(String, boolean) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish a VIB value object.
publish(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.PublishBean: Publish a VIB value object.
publish(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.TransSecsController: Publish a VIB value object.
publish(String, String, ValueObjectInterface) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Publish a VIB value object.
publish(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Publish a VIB value object.
publish(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.VIBInOutMessageBean: Publish a VIB value object.
publish(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.VIBOutMessageBean: Publish should not be called on an out object.
PUBLISH_ONLY_TAG_NAMES - Static variable in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: The array of classes that need to be published but not subscribed.
PUBLISH_ONLY_TAG_NAMES - Static variable in class com.ergotech.vib.servers.rest.RestWrapper: The array of classes that need to be published but not subscribed.
PublishBean - Class in com.ergotech.transsecs.secs
PublishBean() - Constructor for class com.ergotech.transsecs.secs.PublishBean: Default constructor.
publishData(SecsMsg) - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Publishes the data from unsolicted messages is they match an incoming message.
publishData(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Publishs the data from unsolicted messages is they match an incoming message.
publishData(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBOutMessageBean: Publishs the data from unsolicted messages is they match an incoming message.
publishReport(SecsMsg) - Method in class com.ergotech.transsecs.secs.TransSecsController: This will be called by a recieved report to publish all the VIDs.
purge() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Purge the spool queue.
PV - Variable in class com.ergotech.vib.manipulators.spc.PidControl
PWMManipulator - Class in com.ergotech.vib.servers.raspi
PWMManipulator() - Constructor for class com.ergotech.vib.servers.raspi.PWMManipulator

Q

QUALITY_BAD - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used for any control or data source that has a problem, or when a server just starts up and the data value has not yet been initialized.
QUALITY_COMM_FAILURE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This may be used for servers that connect to devices and the connection is lost.
QUALITY_DEVICE_FAILURE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_EGU_EXCEEDED - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_EVALUATION_EXPIRED - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_GOOD - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The best data quality.
QUALITY_IMPOSSIBLE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Impossible quality caused by a connector loop (connector will be disabled)
QUALITY_INITIAL - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Widely used.
QUALITY_LAST_USABLE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This value is sent as the server is removing a listener.
QUALITY_OUT_OF_SERVICE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_PROPERTYONLY - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_REMOTE_PROXY_INIT - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_SIMULATED - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Indicate the that data is not real data, but simulated.
QUALITY_SOURCE_REMOVED - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: When a Connector is removed from a graphic, or some fundamental change occurs that causes the existing value to be invalid then the quality is changed to SOURCE_REMOVED.
QUALITY_TRANSITIONAL - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used when an active control has not "settled" on a value
QUALITY_UNKNOWN - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is a quality that is between good and bad, but still defined as unknown.
QUALITY_WARNING - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
QUALITY_WORST - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The worst (highest number) quality.
QUALITY_WRITE_IN_PROGRESS - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: When writing to some servers (notably PLCs) the value will be returned with this quality.
queueTimeout - Static variable in class com.ergotech.secs.TransactionManager: The amount of time (in seconds) the messages can sit in the queue before being timed-out.

R

RAC - Class in com.ergotech.secs: Reset Acknowledge.
RAC(byte) - Constructor for class com.ergotech.secs.RAC
RAC(SecsFormat) - Constructor for class com.ergotech.secs.RAC
RandomBoolean - Class in com.ergotech.vib.servers: This sample data source produces a random boolean true or false every timebase tick
RandomBoolean() - Constructor for class com.ergotech.vib.servers.RandomBoolean: Create the data source.
RandomData - Class in com.ergotech.vib.servers: This sample data source produces a random number within a range of integers, max and min.
RandomData() - Constructor for class com.ergotech.vib.servers.RandomData: Create the data source.
RandomStringServer - Class in com.ergotech.vib.servers: A simple data source that provides a String as the output data.
RandomStringServer() - Constructor for class com.ergotech.vib.servers.RandomStringServer: Zero argument constructor
randomX - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: This is the whether or not to use random (true) or sequential x values.
randStr1() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource
randStr2() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource
randStr3() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource
RaspiI2CDataSource - Class in com.ergotech.vib.servers.raspi
RaspiI2CDataSource() - Constructor for class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
RaspiI2CManipulator - Class in com.ergotech.vib.servers.raspi
RaspiI2CManipulator() - Constructor for class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
RaspiPinDataSource - Class in com.ergotech.vib.servers.raspi
RaspiPinDataSource() - Constructor for class com.ergotech.vib.servers.raspi.RaspiPinDataSource
RaspiPinManipulator - Class in com.ergotech.vib.servers.raspi
RaspiPinManipulator() - Constructor for class com.ergotech.vib.servers.raspi.RaspiPinManipulator
RaspiPwmManipulator - Class in com.ergotech.vib.servers.raspi
RaspiPwmManipulator() - Constructor for class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
RaspiSPIManipulator - Class in com.ergotech.vib.servers.raspi
RaspiSPIManipulator() - Constructor for class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
rate - Variable in class com.ergotech.vib.servers.FloatFluxServer: The maximum change at each timebase tick to change the value when approaching the level.
RateCalculator - Class in com.ergotech.vib.manipulators: This manipulator takes current and previous input values and calculates the current rate (per second) of change between the current and last value based on the time difference in the timestamps betweeen these values.
RateCalculator() - Constructor for class com.ergotech.vib.manipulators.RateCalculator: The default conctructor.
rb - Static variable in class com.ergotech.vib.utils.Utils
RCMD - Class in com.ergotech.secs: Remote command code or string.
RCMD(byte) - Constructor for class com.ergotech.secs.RCMD: Create a new message with format 31 data.
RCMD(String) - Constructor for class com.ergotech.secs.RCMD: Create a new message with ASCII (format 20) data.
RCMD(SecsFormat) - Constructor for class com.ergotech.secs.RCMD
RCPATTRDATA - Class in com.ergotech.secs: RCPATTRDATA.
RCPATTRDATA(SecsFormat) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with LIST (format 00) data.
RCPATTRDATA(String) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with ASCII (format 20) data.
RCPATTRDATA(boolean) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with Boolean (SecsFormat11) data.
RCPATTRDATA(float) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 4-Byte floating point number (SecsFormat44).
RCPATTRDATA(double) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 8-Byte floating point number (SecsFormat40).
RCPATTRDATA(long) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 8-Byte integer (SecsFormat30).
RCPATTRDATA(byte) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 1-Byte integer (SecsFormat31).
RCPATTRDATA(short) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 2-Byte integer (SecsFormat32).
RCPATTRDATA(int) - Constructor for class com.ergotech.secs.RCPATTRDATA: Create a new message with an 4-Byte integer (SecsFormat34).
RCPATTRID - Class in com.ergotech.secs: RCPATTRID Data Decoder.
RCPATTRID(String) - Constructor for class com.ergotech.secs.RCPATTRID: Create a new message with ASCII (format 20) data.
RCPATTRID(SecsFormat) - Constructor for class com.ergotech.secs.RCPATTRID: Create a new message with the data contained in a SecsFormat object.
RCPBODY - Class in com.ergotech.secs: Recipe body.
RCPBODY(byte[]) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with binary (format 10) data.
RCPBODY(String) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with ASCII (format 20) data.
RCPBODY(long) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with an 8-Byte integer (SecsFormat30).
RCPBODY(byte) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with an 1-Byte integer (SecsFormat31).
RCPBODY(short) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with an 2-Byte integer (SecsFormat32).
RCPBODY(int) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with an 4-Byte integer (SecsFormat34).
RCPBODY(SecsFormat) - Constructor for class com.ergotech.secs.RCPBODY: Create a new message with the data contained in a SecsFormat object.
RCPCLASS - Class in com.ergotech.secs: RCPCLASS Recipe class Used in S15F11
RCPCLASS(String) - Constructor for class com.ergotech.secs.RCPCLASS: Create a new message with ASCII (format 20) data.
RCPCLASS(SecsFormat) - Constructor for class com.ergotech.secs.RCPCLASS: Create a new message with the data contained in a SecsFormat object.
RCPCMD - Class in com.ergotech.secs: RCPCMD Indicates an action to be performed on a recipe Used in S15F21, F22
RCPCMD(int) - Constructor for class com.ergotech.secs.RCPCMD: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RCPCMD(SecsFormat) - Constructor for class com.ergotech.secs.RCPCMD
RCPDEL - Class in com.ergotech.secs: RCPDEL - Used in S15F35
RCPDEL(int) - Constructor for class com.ergotech.secs.RCPDEL: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RCPDEL(SecsFormat) - Constructor for class com.ergotech.secs.RCPDEL
RCPDESCLTH - Class in com.ergotech.secs
RCPDESCLTH(long) - Constructor for class com.ergotech.secs.RCPDESCLTH: Create a new message with an 8-Byte integer (SecsFormat50).
RCPDESCLTH(byte) - Constructor for class com.ergotech.secs.RCPDESCLTH: Create a new message with an 1-Byte integer (SecsFormat51).
RCPDESCLTH(short) - Constructor for class com.ergotech.secs.RCPDESCLTH: Create a new message with an 2-Byte integer (SecsFormat52).
RCPDESCLTH(int) - Constructor for class com.ergotech.secs.RCPDESCLTH: Create a new message with an 4-Byte integer (SecsFormat54).
RCPDESCLTH(SecsFormat) - Constructor for class com.ergotech.secs.RCPDESCLTH: Create a new message with the data contained in a SecsFormat object.
RCPDESCNM - Class in com.ergotech.secs: SECS/GEM RCPDESCNM Identifies a type of a recipe: "ASDesc", "BodyDesc", "GenDesc" Used in S15F24
RCPDESCNM(String) - Constructor for class com.ergotech.secs.RCPDESCNM: Create a new message with ASCII (format 20) data.
RCPDESCNM(SecsFormat) - Constructor for class com.ergotech.secs.RCPDESCNM: Create a new message with the data contained in a SecsFormat object.
RCPDESCTIME - Class in com.ergotech.secs: RCPDESCTIME The timestamp of a recipe section, in the format "YYYYMMDDhhmmsscc" The name (identifier) of a non-identifier recipe attribute.
RCPDESCTIME(String) - Constructor for class com.ergotech.secs.RCPDESCTIME: Create a new message with ASCII (format 20) data.
RCPDESCTIME(SecsFormat) - Constructor for class com.ergotech.secs.RCPDESCTIME: Create a new message with the data contained in a SecsFormat object.
RCPID - Class in com.ergotech.secs: RCPID Recipe identifier.
RCPID(String) - Constructor for class com.ergotech.secs.RCPID: Create a new message with ASCII (format 20) data.
RCPID(SecsFormat) - Constructor for class com.ergotech.secs.RCPID: Create a new message with the data contained in a SecsFormat object.
RCPNAME - Class in com.ergotech.secs: RCPNAME Recipe name Used in S15F11
RCPNAME(String) - Constructor for class com.ergotech.secs.RCPNAME: Create a new message with ASCII (format 20) data.
RCPNAME(SecsFormat) - Constructor for class com.ergotech.secs.RCPNAME: Create a new message with the data contained in a SecsFormat object.
RCPNEWID - Class in com.ergotech.secs: SECS/GEM RCPNEWID The new recipe identifier assigned as the result of a copy or rename operation.
RCPNEWID(String) - Constructor for class com.ergotech.secs.RCPNEWID: Create a new message with ASCII (format 20) data.
RCPNEWID(SecsFormat) - Constructor for class com.ergotech.secs.RCPNEWID: Create a new message with the data contained in a SecsFormat object.
RCPOWCODE - Class in com.ergotech.secs: Indicates whether any pre-existing recipe is to be overwritten (=TRUE) or not (=FALSE) on download Used in S15F27
RCPOWCODE(boolean) - Constructor for class com.ergotech.secs.RCPOWCODE: Create a new message with Boolean (SecsFormat11) data.
RCPOWCODE(SecsFormat) - Constructor for class com.ergotech.secs.RCPOWCODE: Create the object from a SecsFormat data type.
RCPPAIR - Class in com.ergotech.secs: RCPPAIR Used in Stream 16 consists of data elements RCPPARNM RCPPARVAL
RCPPAIR() - Constructor for class com.ergotech.secs.RCPPAIR
RCPPAIR(RCPPARNM, RCPPARVAL) - Constructor for class com.ergotech.secs.RCPPAIR
RCPPAIR(SecsFormat00) - Constructor for class com.ergotech.secs.RCPPAIR
rcpparnm - Variable in class com.ergotech.secs.RCPPAIR
RCPPARNM - Class in com.ergotech.secs: RCPPARNM The name of a recipe variable parameter setting.
RCPPARNM(String) - Constructor for class com.ergotech.secs.RCPPARNM: Create a new message with ASCII (format 20) data.
RCPPARNM(SecsFormat) - Constructor for class com.ergotech.secs.RCPPARNM: Create a new message with the data contained in a SecsFormat object.
RCPPARRULE - Class in com.ergotech.secs: RCPPARRULE The restrictions applied to a recipe variable parameter setting.
RCPPARRULE(String) - Constructor for class com.ergotech.secs.RCPPARRULE: Create a new message with ASCII (format 20) data.
RCPPARRULE(SecsFormat) - Constructor for class com.ergotech.secs.RCPPARRULE: Create a new message with the data contained in a SecsFormat object.
rcpparval - Variable in class com.ergotech.secs.RCPPAIR
RCPPARVAL - Class in com.ergotech.secs: The initial setting assigned to a recipe valriable parameter.
RCPPARVAL(boolean) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with boolean (format 11) data.
RCPPARVAL(byte[]) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with binary (format 10) data.
RCPPARVAL(String) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with ASCII (format 20) data.
RCPPARVAL(long) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with an 8-Byte integer (SecsFormat30).
RCPPARVAL(byte) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with an 1-Byte integer (SecsFormat31).
RCPPARVAL(short) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with an 2-Byte integer (SecsFormat32).
RCPPARVAL(int) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with an 4-Byte integer (SecsFormat34).
RCPPARVAL(SecsFormat) - Constructor for class com.ergotech.secs.RCPPARVAL: Create a new message with the data contained in a SecsFormat object.
RCPRENAME - Class in com.ergotech.secs: Indicates whether a recipe is to be renamed (=TRUE) or copied (=FALSE) Used in S15F19
RCPRENAME(boolean) - Constructor for class com.ergotech.secs.RCPRENAME: Create a new message with Boolean (SecsFormat11) data.
RCPRENAME(SecsFormat) - Constructor for class com.ergotech.secs.RCPRENAME: Create the object from a SecsFormat data type.
RCPSECCODE - Class in com.ergotech.secs: Indicates the sections of a recipe requested for trasfer or being transferred Used in S15F15, F16, F17
RCPSECCODE(byte) - Constructor for class com.ergotech.secs.RCPSECCODE: Create a new message from a byte data type.
RCPSECCODE(SecsFormat) - Constructor for class com.ergotech.secs.RCPSECCODE
RCPSECNM - Class in com.ergotech.secs: RCPSECNM Recipe section name: "Generic", "Body", or "ASDS" Used in S15F15, F18
RCPSECNM(String) - Constructor for class com.ergotech.secs.RCPSECNM: Create a new message with ASCII (format 20) data.
RCPSECNM(SecsFormat) - Constructor for class com.ergotech.secs.RCPSECNM: Create a new message with the data contained in a SecsFormat object.
RCPSPEC - Class in com.ergotech.secs: Recipe specifier.
RCPSPEC(String) - Constructor for class com.ergotech.secs.RCPSPEC: Create a new message with ASCII (format 20) data.
RCPSPEC(SecsFormat) - Constructor for class com.ergotech.secs.RCPSPEC: Create a new message from a SecsFormat data type.
RCPSTAT - Class in com.ergotech.secs: RCPSTAT - The status of a managed recipe Used - S15F10
RCPSTAT(int) - Constructor for class com.ergotech.secs.RCPSTAT: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RCPSTAT(SecsFormat) - Constructor for class com.ergotech.secs.RCPSTAT
RCPUPDT - Class in com.ergotech.secs: Indicates if an existing recipe is to be updated (=TRUE) or a new recipe is to be created (=FALSE Used in S15F13
RCPUPDT(boolean) - Constructor for class com.ergotech.secs.RCPUPDT: Create a new message with Boolean (SecsFormat11) data.
RCPUPDT(SecsFormat) - Constructor for class com.ergotech.secs.RCPUPDT: Create the object from a SecsFormat data type.
RCPVERS - Class in com.ergotech.secs: RCPVERS Recipe version Used in S15F10, F12
RCPVERS(String) - Constructor for class com.ergotech.secs.RCPVERS: Create a new message with ASCII (format 20) data.
RCPVERS(SecsFormat) - Constructor for class com.ergotech.secs.RCPVERS: Create a new message with the data contained in a SecsFormat object.
read(byte[], int, int) - Method in class com.ergotech.secs.HSMSSocketManager: Read the socket.
read() - Method in class com.ergotech.secs.PortManager: Read the port.
read(byte[], int, int) - Method in class com.ergotech.secs.PortManager: Read the port.
read(byte[], int, int) - Method in class com.ergotech.secs.SecsISocketManager: Read the socket.
read(byte[], int, int) - Method in class com.ergotech.secs.SerialPortManager: Read the socket.
read(byte[], int, int) - Method in class com.ergotech.secs.TerminalServerPortManager: Read the socket.
read() - Method in class com.ergotech.transsecs.secs.Base64.InputStream: Reads enough of the input stream to convert to/from Base64 and returns the next byte.
read(byte[], int, int) - Method in class com.ergotech.transsecs.secs.Base64.InputStream: Calls Base64.InputStream.read() repeatedly until the end of stream is reached or len bytes are read.
read() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will read a single byte.
read(byte[]) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will read an array of bytes and place them into the given array.
read(byte[], int, int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will read an array of bytes and place them into the array of bytes at a given offset (up to the length).
read() - Method in class com.ergotech.vib.ports.Port: This will read a single byte.
read(byte[]) - Method in class com.ergotech.vib.ports.Port: This will read an array of bytes and place them into the given array.
read(byte[], int, int) - Method in class com.ergotech.vib.ports.Port: This will read an array of bytes and place them into the array of bytes at a given offset (up to the length).
read() - Method in class com.ergotech.vib.ports.PortInputStream: Reads a single byte from the port.
read(byte[], int, int) - Method in class com.ergotech.vib.ports.PortInputStream: Read a byte array from the port.
read(byte[]) - Method in class com.ergotech.vib.ports.PortInputStream: Read a byte array from the port.
read() - Method in interface com.ergotech.vib.ports.PortInterface: This will read a single byte.
read(byte[]) - Method in interface com.ergotech.vib.ports.PortInterface: This will read an array of bytes and place them into the given array.
read(byte[], int, int) - Method in interface com.ergotech.vib.ports.PortInterface: This will read an array of bytes and place them into the array of bytes at a given offset (up to the length).
read() - Method in class com.ergotech.vib.ports.UDPSocket: Forces a packet read with available() and then calls the superclass.
read(byte[], int, int) - Method in class com.ergotech.vib.ports.UDPSocket: Forces a packet read with available() and then calls the superclass.
read(byte[]) - Method in class com.ergotech.vib.ports.UDPSocket: Forces a packet read with available() and then calls the superclass.
READ_CONTAINER_NAME - Static variable in class com.ergotech.vib.servers.rest.RestWrapper: The name of the container holding the variables that will be read.
READ_ERROR - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Some error reading the PLC.
readAllLongTimebaseServers() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Read all the values for this device that have timebase of < 2 seconds.
readAndWait(int, int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will wait until we have received what the port thinks is everything.
readAndWait(int, int, int) - Method in class com.ergotech.vib.ports.Port: This will wait until we have received data until either the timeout or the interCharacterTimeout expire or length characters are read.
readAndWait(int, int, int) - Method in interface com.ergotech.vib.ports.PortInterface: This will wait until we have received what the port thinks is everything.
readAndWait(int, int, int) - Method in class com.ergotech.vib.ports.UDPSocket: This method returns a copy of the byte array from the socket.
readCurrent() - Method in class com.ergotech.vib.ports.Port: This will create a byte array of the current size of the buffer (filled).
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Read from the device.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Read from the device.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Read the packet from the PLC.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: A PLC transaction.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer: Read from the device.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer: Read from the device.
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Read from the device.
readServers - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The tables of read and write servers.
readToStringBuffer(InputStream, StringBuffer) - Method in class com.ergotech.vib.manipulators.CommandExecutor: Read the input from the stream and append it to the string buffer.
REAL - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
REAL - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
received(SecsMsg) - Method in class com.ergotech.secs.gem.Log4JLogger: Called when a message is received.
received(byte[]) - Method in class com.ergotech.secs.gem.Log4JLogger: Called when a message is received.
received(SecsMsg) - Method in class com.ergotech.secs.Logger: Called whenever a message is received.
received(byte[]) - Method in class com.ergotech.secs.Logger: This will display received bytes.
received(SecsMsg) - Method in interface com.ergotech.secs.LoggerInterface: Called whenever a message is received.
received(byte[]) - Method in interface com.ergotech.secs.LoggerInterface: This will be called wheneever raw bytes of data are read from the port.
received(SecsMsg) - Method in class com.ergotech.secs.NetLogger
received(byte[]) - Method in class com.ergotech.secs.NetLogger
received(SecsMsg) - Method in class com.ergotech.secs.SyslogLogger
received(byte[]) - Method in class com.ergotech.secs.SyslogLogger
received(SecsMsg) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Called when a message is received.
received(byte[]) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Called when a message is received.
received(SecsMsg) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
received(byte[]) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
received(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBLogger: Called to display the SML of the messages received.
received(byte[]) - Method in class com.ergotech.transsecs.secs.VIBLogger: Called to display the byte stream received.
receiveMessage(SecsMsg, boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Process the response to the sent message.
receiveMessage(SecsMsg, boolean, boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Process the response to the sent message.
receiveMessage(SecsMsg, boolean, boolean) - Method in class com.ergotech.transsecs.secs.VIBOutMessageBean: Process the incoming message.
recipeBaseDir - Variable in class com.ergotech.transsecs.secs.TransSecsController: This server is used by a FileRecipeManager to set the base directory of the file.
recipeFileExtension - Variable in class com.ergotech.transsecs.secs.TransSecsController: This server is used by a FileRecipeManager to set the extension of the file.
recipeManager - Variable in class com.ergotech.transsecs.secs.TransSecsController: This is the recipe manager for this controller.
RecipeManagerInterface - Interface in com.ergotech.transsecs.secs: This is the interface for recipe manager objects.
recipeManagerType - Static variable in class com.ergotech.transsecs.secs.TransSecsController: This is the recipe manager type.
RED_ID - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The redundancy ID.
refreshCurrentValue() - Method in class com.ergotech.secs.gem.GemCLOCK: Inverses the bool value and sets this as the current value.
refreshCurrentValue() - Method in class com.ergotech.secs.gem.TraceServer: This will take the samples and send the report if necessary.
refreshCurrentValue() - Method in class com.ergotech.vib.manipulators.Blinker: This is really called by our own timer.
refreshCurrentValue() - Method in class com.ergotech.vib.manipulators.Constant: Called on the timebase and sends the current value.
refreshCurrentValue() - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: Poll the port for an unsolicited value.
refreshCurrentValue() - Method in class com.ergotech.vib.manipulators.spc.PidControl: This method is called automatically by the timer in SimpleDataSource every timebase interval.
refreshCurrentValue() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: Poll the port for an unsolicited value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.ArrayDataSource: This is called every timebase tick to create a new ArrayValueObject and update connectors.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.CPULoad: Increment the value according to the formula: Fill output with cpu load values
refreshCurrentValue() - Method in class com.ergotech.vib.servers.ExtremeServer: Inverses the bool value and sets this as the current value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.FloatFluxServer: Sets the new calculated value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.IncrementServer: Increment the value according to the formula:
refreshCurrentValue() - Method in class com.ergotech.vib.servers.MarqueeServer: This method will be called on the timebase.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.RandomBoolean: Sets the new value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.RandomData: Sets the new value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.RandomStringServer: Sets the current data as a string value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.SimpleDataSource: This method is overridden by subclasses to provide the data values.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.SineServer: Sets the new value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.StringServer: Sets the current data as a string value.
refreshCurrentValue(long) - Method in class com.ergotech.vib.servers.SynchronizedClockTick: Inverses the bool value and sets this as the current value.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.TimeServer: This will send a new update if the timebase has changed.
refreshCurrentValue() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: This is called every timebase tick to create a new ValueObject and update connectors.
refreshImage() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Refresh the data in the block.
refreshInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MixSecurityManager: Called to refresh the files.
register(int, int) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Register to spool the particular stream/function.
register(int) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Spool all messages in the stream.
register() - Method in class com.ergotech.secs.Logger: Register for all events with the default event handler.
register(SecsEventHandler) - Method in class com.ergotech.secs.Logger: Register for all events with the specified event handler.
register() - Method in class com.ergotech.secs.NetLogger
register(SecsEventHandler) - Method in class com.ergotech.secs.NetLogger
register() - Method in class com.ergotech.secs.SyslogLogger
register(SecsEventHandler) - Method in class com.ergotech.secs.SyslogLogger
register() - Method in class com.ergotech.transsecs.secs.TransSecsController: This will attempt to register this EquipmentController as the EquipmentController for its name.
register(String, SecsFormat) - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Register the data source name.
register(String, SecsFormat, String, String, String) - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Register the data source name.
register(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.VIBInMessageBean: Register the data source name.
register(String, Object) - Method in class com.ergotech.transsecs.secs.VIBInOutMessageBean: Register the data source name.
register(String, SecsFormat) - Method in class com.ergotech.transsecs.secs.VIBInOutMessageBean: Register the data source name.
register(String, SecsFormat, String, String, String) - Method in class com.ergotech.transsecs.secs.VIBInOutMessageBean: Register the data source name.
register(String, ValueObjectInterface) - Method in class com.ergotech.transsecs.secs.VIBInOutMessageBean: Register the data source name.
register() - Method in class com.ergotech.transsecs.secs.VIBLogger
register(SecsEventHandler) - Method in class com.ergotech.transsecs.secs.VIBLogger
register(String, Object, String, String, String) - Method in class com.ergotech.transsecs.secs.VIBOutMessageBean: Register the data source name.
register(String, Object) - Method in class com.ergotech.transsecs.secs.VIBOutMessageBean: Register the data source name.
REGISTER_0X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The register type 0x
REGISTER_1X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The register type 1x
REGISTER_3X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The register type 3x
REGISTER_4X - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The register type 4x
registerAlarm(SecsFormat, GemALID) - Method in class com.ergotech.secs.gem.GemHandler: Registers an alarm server with the given alid
registerALID(SecsFormat3x5x, String, String, byte, SecsFormat3x5x, SecsFormat3x5x) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Alarm handling.
registerALID(SecsFormat, String, byte, int, int) - Method in class com.ergotech.secs.gem.GemHandler: Alarm handling.
registerALID(SecsFormat3x5x, String, String, byte, SecsFormat3x5x, SecsFormat3x5x) - Method in class com.ergotech.secs.gem.GemHandler: Alarm handling.
registerCEID(String) - Method in class com.ergotech.secs.Event
registerCEID(CEID) - Method in class com.ergotech.secs.Event
registerCEID(SecsFormat3x5x, String, List<SecsFormat>) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: CEID registration.
registerCEID(SecsFormat3x5x) - Method in class com.ergotech.secs.gem.GemHandler: ceid registration.
registerCEID(SecsFormat3x5x, String, List<SecsFormat>) - Method in class com.ergotech.secs.gem.GemHandler: CEID registration.
registerCEID(SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x, SecsFormat3x5x) - Method in class com.ergotech.secs.gem.OnlineHandler: Sets the four CEIDs, that are associated with the state transitions.
registerCEIDs() - Method in class com.ergotech.secs.gem.OnlineHandler: Attempts to identify the CEIDs.
registerECID(ECID, ECV) - Method in class com.ergotech.secs.ECControllerHandler: New Equipment Constant Send public boolean S2F15 (SecsMsg msg) { S2F16 reply = new S2F16(new EAC(setECs((S2F15)msg))); reply.setPrimaryMessage(msg); reply.sendMessage(); return true; }
registerECID(int, ECID, ECV) - Static method in class com.ergotech.secs.Event
registerECIDValidator(SecsFormat, ECIDValidationInterface) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This method allows the equipment to validate an ECID before it is changed.
registerECIDValidator(SecsFormat, ECIDValidationInterface) - Method in class com.ergotech.secs.gem.GemHandler: This method allows the equipment to validate an ECID before it is changed.
registerECIDValidator(int, ECIDValidationInterface) - Method in class com.ergotech.secs.gem.GemHandler: This method allows the equipment to validate an ECID before it is changed.
registerEncoding(int, String) - Method in class com.ergotech.secs.SecsFormat22: Register the encoding for the code.
registerEventComponents(VIBMessageBean) - Method in class com.ergotech.transsecs.secs.TransSecsController: This will register all the RPTIDs and VID associated with a report message.
registerFactory(String, PortFactoryInterface) - Method in class com.ergotech.vib.ports.PortFactoryManager: This will add a factory for a given name.
registerForId(int) - Method in class com.ergotech.secs.Logger: Register for a specific event with the default event handler.
registerForId(SecsEventHandler, int) - Method in class com.ergotech.secs.Logger: Register for a specific event with the specified event handler.
registerForId(int) - Method in class com.ergotech.secs.NetLogger
registerForId(SecsEventHandler, int) - Method in class com.ergotech.secs.NetLogger
registerForId(int) - Method in class com.ergotech.secs.SyslogLogger
registerForId(SecsEventHandler, int) - Method in class com.ergotech.secs.SyslogLogger
registerForId(int) - Method in class com.ergotech.transsecs.secs.VIBLogger
registerForId(SecsEventHandler, int) - Method in class com.ergotech.transsecs.secs.VIBLogger
registerForReceiveNotification(String, MessageNotifier) - Method in class com.ergotech.transsecs.secs.TransSecsController: Register to be notified of the receipt of a specific message by name.
registerForReceiveNotification(String, MessageNotifier) - Method in class TransSECS.GemIDConnection
registerForUpdate(SecsFormat, int, Object, String) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: this allows the equpiment to watch a vid.
registerForUpdate(SecsFormat, int, Object, String) - Method in class com.ergotech.secs.gem.GemHandler: this allows the equpiment to watch a vid.
registerForUpdate(int, int, Object, String) - Method in class com.ergotech.secs.gem.GemHandler: this allows the equpiment to watch a vid.
registerForValueNotification(int, int, ValueNotifier) - Method in class TransSECS.GemIDConnection
registerIncomingMsg(int, String, MessageVerifier) - Method in class com.ergotech.secs.gem.OnlineHandler: All messages registered will be halted when the machine is in the state provided.
registerIncomingOnlineLocalMsg(String, MessageVerifier) - Method in class com.ergotech.secs.gem.OnlineHandler: All messages registered will be halted when the machine is in online-local mode.
registerInstance(VIBMessageBean) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Register an instance of a VIBMessageBean.
registerLimitDefaults(SecsFormat3x5x, SecsFormat3x5x, String) - Method in class com.ergotech.secs.gem.ECHandler: Register a limit ceid for a specific VID.
registerLimitDefaults(SecsFormat3x5x, SecsFormat3x5x, String) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: Register default parameters for limits monitoring for a particular VID.
registerMessageSpecificOutgoingVerifier(int, int, SystemHandlerInterface) - Static method in class com.ergotech.secs.SecsMsg: This handler will be called only for the stream/function specified.
registerOutgoingMsg(int, String, MessageVerifier) - Method in class com.ergotech.secs.gem.OnlineHandler: All messages registered will be halted when the machine is in the state provided.
registerOutgoingOnlineLocalMsg(String, MessageVerifier) - Method in class com.ergotech.secs.gem.OnlineHandler: All messages registered will be halted when the machine is in online-local mode.
registerString(String, DataSource) - Method in class com.ergotech.vib.servers.MarqueeDeviceServer: This method is called by a MarqueeServer to initially store the string.
registerSVID(SVID, SV) - Method in class com.ergotech.secs.Event: This will register a SV with a SVID.
registerTrace(TRID, TOTSMP, REPGSZ, SecsFormat00) - Method in class com.ergotech.secs.gem.GemHandler: /** Trace registration.
registerTypeNames - Static variable in class com.ergotech.vib.servers.modbus.ModbusServer: The names of the various register types.
registerVID(int, VID, V) - Method in class com.ergotech.secs.Event: This will register a V with a VID.
registerVID(SecsFormat3x5x, String, int, String, double, double, SecsFormat, double) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: VID registration.
registerVID(SecsFormat3x5x, String, int, String, SecsFormat) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: VID registration.
registerVID(SecsFormat3x5x, String, int, String, double, double, SecsFormat, double) - Method in class com.ergotech.secs.gem.GemHandler: VID registration.
registerVID(SecsFormat3x5x, String, int, String, SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: VID registration.
registerVIDMonitor(int, int, String, SecsFormat) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Register a monitor for a vid.
registerVIDMonitor(int, int, String, SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: Register a monitor for a vid.
registerWrapperForEquipmentControl(WrapperInterface) - Method in class com.ergotech.secs.gem.GemEquipment: If you register with this method, the you will have access to the GemEquipment or the equipment control (both the same object).
RegularExpression - Class in com.ergotech.vib.manipulators.string: This manipulator breaks an input String into three parts: a start, a main part, and an end part.
RegularExpression() - Constructor for class com.ergotech.vib.manipulators.string.RegularExpression
releaseFactory(String, Object) - Method in class com.ergotech.vib.ports.PortFactoryManager: Once a factory is no longer required, that is, checkin/checkout will no longer be called on this factory, the reference to the factory should be removed allowing the factory and any underlying resources to be freed.
releasePortPool() - Method in class com.ergotech.vib.ports.PortDeviceServer: Frees all port/factory related resources for this component.
releasePortPool(PortPoolInterface, Object) - Method in class com.ergotech.vib.ports.PortFactory: Once a factory is no longer required, that is, checkin/checkout will no longer be called on this factory, the reference to the factory should be removed allowing the factory and any underlying resources to be freed.
releasePortPool(PortPoolInterface, Object) - Method in interface com.ergotech.vib.ports.PortFactoryInterface: Removes a reference to a particular port name.
releasePortPool() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: Frees all port/factory related resources for this component.
releasePortPool() - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
REMOTE_ONLINE - Static variable in class com.ergotech.secs.gem.OnlineHandler: REMOTE_ONLINE value is 5 matching E5 definition.
remove(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Remove the server from the read servers array.
remove(Object) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
remove(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
removeAlarm(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Remove the given ceid.
removeAll(Collection<?>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
removeCEID(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Remove the given ceid.
removeConnectionFromDevice(DataSource.Writable, String, String, String) - Method in class com.ergotech.transsecs.secs.PublishBean: Removes the connection from this server to the device and server.
removeConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemDevicesSVID: Removes the connection from this server to the device and server.
removeConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemECID: Removes the connection from this server to the device and server.
removeConnectionToDevice(String, String, String) - Method in class com.ergotech.secs.gem.GemID: Removes the connection from this server to the device and server.
removeConnector(Connector) - Method in class com.ergotech.vib.servers.DataSource: Removes the given connector.
removeConnector(String, Connector) - Method in class com.ergotech.vib.servers.SimpleDataSource: Removes a listener, typically a bean or other data source, from a data source.
removeDataSource(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: Removes the data source with the given Name.
removeDelegate(Delegate) - Method in class TransSECS.MessageReceiveNotifier: Remove a raw delegate.
removeDependentEInterface(LifeCycle) - Method in class com.ergotech.transsecs.secs.TransSecsController: Remove a dependent interface
removeDigitalIn(DigitalIn) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
removeDigitalOut(DigitalOut) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
removeGemEquipment(String) - Static method in class com.ergotech.secs.gem.GemEquipment: Remove the named equipment from the available equipment list.
removeIdReference(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable: Remove the reference to the provide id from the associated id list.
removeInputRegister(InputRegister) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
removeLimit() - Method in class com.ergotech.secs.gem.GemLIMITID: Remove this limit.
removeListener(SecsEventListener) - Method in class com.ergotech.secs.SecsEventHandler: This will remove all range of events that this listener was receiving.
removeListenerForId(SecsEventListener, int) - Method in class com.ergotech.secs.SecsEventHandler: This will remove a eventID that this listener was receiving.
removeLogger(LoggerInterface) - Method in class com.ergotech.transsecs.secs.MultiLogger: Removes a logger.
removeLogger(String) - Static method in class com.ergotech.transsecs.secs.VIBLogger: Remove the named logger.
removeMessageDelegate(MessageDelegate) - Method in class TransSECS.MessageReceiveNotifier: Remove a message delegate.
removeMessageHandler(int, Object) - Method in class com.ergotech.secs.HSMSSocketListener: Remove a message handler from this connection.
removeMessageHandler(Object) - Method in class com.ergotech.secs.SessionManager: Removes a new message handle object.
removeObjectAsDelegate(Object) - Method in class TransSECS.MessageReceiveNotifier: Remove a raw delegate.
removePortManager(PortManager) - Static method in class com.ergotech.secs.PortManager: Remove a port manager.
removePropertyChangeListener(PropertyChangeListener) - Method in class com.ergotech.vib.servers.SimpleDataSource: Remove this PropertyChangeListener from the internal list.
removeRegister(Register) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
removeResponseHandler(MessageResponseInterface) - Method in class com.ergotech.secs.SecsMsg: Removes a response listener.
removeRPTID(long) - Method in class com.ergotech.secs.gem.GemToolModelSnapshot: Remove the given ceid.
removeServer(S) - Method in class com.ergotech.vib.servers.plc.DirtyVector: This calls the superclass's method after setting the dirty flag.
removeServer(PLCServer) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Removes a PLCServer, typically a bean or other data source, from this object.
removeSessionId(int) - Method in class com.ergotech.secs.PortManager: Remove a message handler for a specified session id.
removeStateChangeNotifier(StateChangeNotification) - Method in class com.ergotech.secs.gem.CommunicationsHandler: Removes an object that was recieving notification of state changes.
removeStateChangeNotifier(StateChangeNotification) - Method in class com.ergotech.secs.gem.OnlineHandler: Removes an object that was recieving notification of state changes.
removeValueChangedListener(Object) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Creates a connector from the default outport of this server to the method called "valueInput" of the provided object.
removeValueChangedListener(Object) - Method in class com.ergotech.vib.servers.SimpleDataSource: Removes the object as a listener to this component.
removeVetoableChangeListener(VetoableChangeListener) - Method in class com.ergotech.vib.servers.SimpleDataSource: Remove this VetoableChangeListener from the internal list.
removeVIBEventListener(VIBEventListener) - Method in class com.ergotech.vib.servers.DataSource: Remove a vib event listener.
removeVID(long) - Method in class com.ergotech.secs.gem.GemHostModel: Remove the given vid.
REPGSZ - Class in com.ergotech.secs: Total Samples to be made.
REPGSZ(String) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with ASCII (format 20) data.
REPGSZ(long) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with an 8-Byte integer (SecsFormat30).
REPGSZ(byte) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with an 1-Byte integer (SecsFormat31).
REPGSZ(short) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with an 2-Byte integer (SecsFormat32).
REPGSZ(int) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with an 4-Byte integer (SecsFormat34).
REPGSZ(SecsFormat) - Constructor for class com.ergotech.secs.REPGSZ: Create a new message with the data contained in a SecsFormat object.
replaceConnectors(Vector<Connector>) - Method in class com.ergotech.vib.servers.DataSource: NOTE: This is NOT to be used unless you replace ALL the EXISTING connectors.
replaceDataWith(SecsFormat) - Method in class com.ergotech.secs.SecsMsg: Replaces the outgoing message with the new outgoing message.
replaces(ValueObjectInterface, double) - Method in class com.ergotech.vib.valueobjects.ValueObject: this is used to determine if we should send this valueobject to replace oldValue.
replaces(ValueObjectInterface, double) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will determine if this ValueObject should be sent out to replace another ValueObject.
reply() - Method in class com.ergotech.secs.S1F3: We are expecting a S1F4
replyBit - Variable in class com.ergotech.secs.SecsMsg: Set to true to indicate that the message will be sent with the W-bit set.
REPORT_LINKED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an event is registered.
REPORT_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an report is registered.
REPORT_SENT - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an report is triggered.
REPORT_UNLINKED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an report is linked.
REPORT_UNREGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an report is unregistered.
reportToJSON(ReportValues, String) - Static method in class com.ergotech.secs.JSONEncodeDecode: Encode a report to a JSON Object.
ReportWriter - Interface in com.ergotech.secs.gem
reprocessMessage(SecsMsg) - Method in class com.ergotech.secs.SessionManager: This allows for a messages to be processed as though it had been received.
REQUESTCURRENTVALUE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will be called by active controls to ask a server for their in current value.
REQUESTHISTORICAL - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is used with the clientRequest when a client is requesting historical data.
requestOnline(boolean) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This method allows the equipment to request online, or set offline.
requestOnline(boolean) - Method in class com.ergotech.secs.gem.GemHandler: This method allows the equipment to request online, or set offline.
requestRefresh() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Force an untimely refresh of the address block.
requestSpool(SecsMsg) - Method in interface com.ergotech.secs.SpoolHandler
requestSyncWrite(String) - Static method in class com.ergotech.vib.servers.SimpleDataSource
requiresPoll() - Method in class com.ergotech.secs.ConnectionManager: Returns true if we need to poll for messages.
requiresPoll() - Method in class com.ergotech.secs.HSMSConnectionManager: Returns true if we need to poll for messages.
requiresPoll() - Method in class com.ergotech.secs.SecsIConnectionManager: Returns true if we need to poll for messages.
requiresSyncWrite - Static variable in class com.ergotech.vib.servers.SimpleDataSource: When this is true, and we are using auth and containers, then only one person can update a server at a time.
resetAutoResponseTable() - Static method in class com.ergotech.transsecs.secs.VIBMessageBean
resetDirty() - Method in class com.ergotech.vib.servers.plc.DirtyVector: Reset the dirty flag.
RESETENA - Class in com.ergotech.secs: Reset enabled.
RESETENA(byte) - Constructor for class com.ergotech.secs.RESETENA: Create a new message with an 1-Byte integer (SecsFormat51).
RESETENA(SecsFormat) - Constructor for class com.ergotech.secs.RESETENA: Create a new message with the data contained in a SecsFormat object.
resetErrorCount() - Method in class com.ergotech.vib.ports.PortDeviceServer: This routine resets the current error count.
RESPEC - Class in com.ergotech.secs: RESPEC Object specifier for the recipe executor Used in S15F29, F33, F35
RESPEC(String) - Constructor for class com.ergotech.secs.RESPEC: Create a new message with ASCII (format 20) data.
RESPEC(SecsFormat) - Constructor for class com.ergotech.secs.RESPEC: Create a new message with the data contained in a SecsFormat object.
RESPONSE_RECEIVED - Static variable in class com.ergotech.transsecs.secs.LocalMessageReference: The name of the "responseReceived" inport.
RESPONSE_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.LocalMessageReference: This is the name that we publish use to publish the received response.
RESPONSE_STATUS_NAME - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: This is the name that we publish use to publish the received response.
responseError - Variable in class com.ergotech.secs.SecsMsg: The response error.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This method receives the response to the S1F13 sent out in "Not Communicating" and will change the state to "Wait Delay" if appropriate.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.gem.EventOutSpooler: The MsgResponseInterface.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.gem.EventSpooler: The MsgResponseInterface.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.gem.GemSpoolHandler: The MsgResponseInterface.
responseReceived(int, SecsMsg, SecsMsg) - Method in interface com.ergotech.secs.MessageResponseInterface: This method will be called when a response to the message is received.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.MultiBlockRequest: The MsgResponseInterface.
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.secs.TransactionManager: The MsgResponseInterface.
responseReceived(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Called after sending the message when the result of sending, up to and including seeing a response, is known.
responseReceived(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.TransSecsController.ResponseWrapper
responseReceived(int, SecsMsg, SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: The MsgResponseInterface.
responseTimedout(boolean) - Method in class com.ergotech.secs.HSMSHeaderMsg: sent by the port manager to indicate that the message has timedout waiting for a response.
responseTimedout(boolean) - Method in class com.ergotech.secs.SecsMsg: sent by the port manager to indicate that the message has timedout waiting for a response.
restore(ECHandler) - Static method in class com.ergotech.secs.gem.GemToolPersistentModelSnapshot: Restore the GEM model from the Persistence File.
restoreModel() - Method in class com.ergotech.secs.gem.GemEquipment: Restore the GEM model from the Persistence File.
restorePersistedValues(TransSecsController) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This method will set the parameter to the transSecsController
restorePersistedValues(Object) - Method in class com.ergotech.transsecs.secs.MqttPersistentConfig: This method will set the parameter to the MqttDeviceServer
restorePersistedValues(Object) - Method in class com.ergotech.transsecs.secs.RestPersistentConfig: This method will set the parameter to the RESTServiceManager
RestPersistentConfig - Class in com.ergotech.transsecs.secs
RestWrapper - Class in com.ergotech.vib.servers.rest
RestWrapper() - Constructor for class com.ergotech.vib.servers.rest.RestWrapper: Default constructor.
resumeEncoding() - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Resumes encoding of the stream.
retainAll(Collection<?>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
retryLimit - Variable in class com.ergotech.secs.SecsIConnectionManager: How many times to attempt a resend when a NAK is received.
ReverseSign - Class in com.ergotech.vib.manipulators: Returns the same value with an opposite sign of the input.
ReverseSign() - Constructor for class com.ergotech.vib.manipulators.ReverseSign: Generic Constructor.
RFC1006DeviceServer - Class in com.ergotech.vib.servers.ppi: This is the PPI RFC1006DeviceServer.
RFC1006DeviceServer() - Constructor for class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: The default constructor.
RIC - Class in com.ergotech.secs: Reset Code.
RIC(byte) - Constructor for class com.ergotech.secs.RIC
RIC(SecsFormat) - Constructor for class com.ergotech.secs.RIC
RIGHT_JUSTIFY - Static variable in class com.ergotech.secs.SecsFormat20: Jusfication constant.
rightSideValue - Variable in class com.ergotech.vib.manipulators.MasterComparer: This is the input value received at the rightSideValueInput.
rightSideValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterComparer: This is the input method for the other value, used as the second input for the comparison.
RISING_EDGE - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: Only send the message on the RISING edge.
RMACK - Class in com.ergotech.secs: RMACK - Conveys whether a requested action was successfully completed, dnied, completed with errors, or will be completeed with notification to the requestor.
RMACK(int) - Constructor for class com.ergotech.secs.RMACK: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RMACK(SecsFormat) - Constructor for class com.ergotech.secs.RMACK
RMCHGSTAT - Class in com.ergotech.secs: Indicates the change that occurred for an object.
RMCHGSTAT(long) - Constructor for class com.ergotech.secs.RMCHGSTAT: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
RMCHGSTAT(byte) - Constructor for class com.ergotech.secs.RMCHGSTAT: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RMCHGSTAT(short) - Constructor for class com.ergotech.secs.RMCHGSTAT: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
RMCHGSTAT(int) - Constructor for class com.ergotech.secs.RMCHGSTAT: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
RMCHGSTAT(SecsFormat) - Constructor for class com.ergotech.secs.RMCHGSTAT: Create a new message with the data contained in a SecsFormat object.
RMCHGTYPE - Class in com.ergotech.secs
RMCHGTYPE(long) - Constructor for class com.ergotech.secs.RMCHGTYPE: Create a new message with an 8-Byte integer (SecsFormat50).
RMCHGTYPE(byte) - Constructor for class com.ergotech.secs.RMCHGTYPE: Create a new message with an 1-Byte integer (SecsFormat51).
RMCHGTYPE(short) - Constructor for class com.ergotech.secs.RMCHGTYPE: Create a new message with an 2-Byte integer (SecsFormat52).
RMCHGTYPE(int) - Constructor for class com.ergotech.secs.RMCHGTYPE: Create a new message with an 4-Byte integer (SecsFormat54).
RMCHGTYPE(SecsFormat) - Constructor for class com.ergotech.secs.RMCHGTYPE: Create a new message with the data contained in a SecsFormat object.
RMDATASIZE - Class in com.ergotech.secs: Indicates the change that occurred for an object.
RMDATASIZE(long) - Constructor for class com.ergotech.secs.RMDATASIZE: Create a new message with an 8-Byte integer unsigned(SecsFormat50).
RMDATASIZE(byte) - Constructor for class com.ergotech.secs.RMDATASIZE: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RMDATASIZE(short) - Constructor for class com.ergotech.secs.RMDATASIZE: Create a new message with an 2-Byte integer unsigned (SecsFormat52).
RMDATASIZE(int) - Constructor for class com.ergotech.secs.RMDATASIZE: Create a new message with an 4-Byte integer unsigned(SecsFormat54).
RMDATASIZE(SecsFormat) - Constructor for class com.ergotech.secs.RMDATASIZE: Create a new message with the data contained in a SecsFormat object.
RMGRNT - Class in com.ergotech.secs: RMGRNT Permission to send, 1 byte.
RMGRNT(byte[]) - Constructor for class com.ergotech.secs.RMGRNT: Create a new message with binary (format 10) data.
RMGRNT(int) - Constructor for class com.ergotech.secs.RMGRNT: Create a new message with binary (format 10) data.
RMGRNT(SecsFormat) - Constructor for class com.ergotech.secs.RMGRNT: Create a new message with data contained in a SecsFormat object.
RMNEWNS - Class in com.ergotech.secs: RMNEWNS New name(identifier) assigned to a recipe namespace.
RMNEWNS(String) - Constructor for class com.ergotech.secs.RMNEWNS: Create a new message with ASCII (format 20) data.
RMNEWNS(SecsFormat) - Constructor for class com.ergotech.secs.RMNEWNS: Create a new message with the data contained in a SecsFormat object.
RMNSCMD - Class in com.ergotech.secs: Action to be performed on a recipe namespace .
RMNSCMD(int) - Constructor for class com.ergotech.secs.RMNSCMD: Create a new message with an 1-Byte integer (SecsFormat51).
RMNSCMD(SecsFormat) - Constructor for class com.ergotech.secs.RMNSCMD
RMNSSPEC - Class in com.ergotech.secs: RMNSSPEC The object specifier of a recipe namespace.
RMNSSPEC(String) - Constructor for class com.ergotech.secs.RMNSSPEC: Create a new message with ASCII (format 20) data.
RMNSSPEC(SecsFormat) - Constructor for class com.ergotech.secs.RMNSSPEC: Create a new message with the data contained in a SecsFormat object.
RMRECSPEC - Class in com.ergotech.secs: RMRECSPEC The object specifier of a distributed recipe namespace recorder Used in S15F39, F41, F43
RMRECSPEC(String) - Constructor for class com.ergotech.secs.RMRECSPEC: Create a new message with ASCII (format 20) data.
RMRECSPEC(SecsFormat) - Constructor for class com.ergotech.secs.RMRECSPEC: Create a new message with the data contained in a SecsFormat object.
RMREQUESTOR - Class in com.ergotech.secs: Set to TRUE if initiator of change request was an attached segment.
RMREQUESTOR(boolean) - Constructor for class com.ergotech.secs.RMREQUESTOR: Create a new message with Boolean (SecsFormat11) data.
RMREQUESTOR(SecsFormat) - Constructor for class com.ergotech.secs.RMREQUESTOR: Create the object from a SecsFormat data type.
RMSEGSPEC - Class in com.ergotech.secs: RMSEGSPEC The object specifier of a distributed recipe namespace segment.
RMSEGSPEC(String) - Constructor for class com.ergotech.secs.RMSEGSPEC: Create a new message with ASCII (format 20) data.
RMSEGSPEC(SecsFormat) - Constructor for class com.ergotech.secs.RMSEGSPEC: Create a new message with the data contained in a SecsFormat object.
RMSPACE - Class in com.ergotech.secs
RMSPACE(long) - Constructor for class com.ergotech.secs.RMSPACE: Create a new message with an 8-Byte integer (SecsFormat50).
RMSPACE(byte) - Constructor for class com.ergotech.secs.RMSPACE: Create a new message with an 1-Byte integer (SecsFormat51).
RMSPACE(short) - Constructor for class com.ergotech.secs.RMSPACE: Create a new message with an 2-Byte integer (SecsFormat52).
RMSPACE(int) - Constructor for class com.ergotech.secs.RMSPACE: Create a new message with an 4-Byte integer (SecsFormat54).
RMSPACE(SecsFormat) - Constructor for class com.ergotech.secs.RMSPACE: Create a new message with the data contained in a SecsFormat object.
RollingArrayBuilder - Class in com.ergotech.vib.manipulators.array
RollingArrayBuilder() - Constructor for class com.ergotech.vib.manipulators.array.RollingArrayBuilder
ROSCTR_ACK - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The Remote Operating Services Control (ROSCTR) - Acknowledge Request.
ROSCTR_ACKNOWLEDGEMENT_EMPTY - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The Remote Operating Services Control (ROSCTR) - Acknowledgement without the parameter and data fields.
ROSCTR_ACKNOWLEDGEMENT_EXTRA - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The Remote Operating Services Control (ROSCTR) - Acknowledgement with extended header information in the parameter fields.
ROSCTR_ACKNOWLEDGEMENT_FULL - Static variable in class com.ergotech.vib.servers.ppi.PPIServer: The Remote Operating Services Control (ROSCTR) - Acknowledgement with either or both the parameter and data fields.
Round - Class in com.ergotech.vib.manipulators: Returns the rounded value of the input.
Round() - Constructor for class com.ergotech.vib.manipulators.Round: Generic Constructor.
rows - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: The number of rows
RPTID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a RPTID.
RPTID - Class in com.ergotech.secs
RPTID(String) - Constructor for class com.ergotech.secs.RPTID
RPTID(long) - Constructor for class com.ergotech.secs.RPTID
RPTID(byte) - Constructor for class com.ergotech.secs.RPTID
RPTID(short) - Constructor for class com.ergotech.secs.RPTID
RPTID(int) - Constructor for class com.ergotech.secs.RPTID
RPTID(SecsFormat) - Constructor for class com.ergotech.secs.RPTID
RPTID - Static variable in class TransSECS.GemIDConnection: Used to identify a RPTID.
rptids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of Report Servers.
rptidSecsFormat - Variable in class com.ergotech.secs.gem.GemHostModel: The format and so the byte-length of the integer RPTID.
RSDA - Class in com.ergotech.secs: Request Spool Data Acknoowledge.
RSDA(byte) - Constructor for class com.ergotech.secs.RSDA: Create a new message with binary (format 10) data.
RSDA(SecsFormat) - Constructor for class com.ergotech.secs.RSDA
RSDC - Class in com.ergotech.secs: Request Spool Data Code - Used in S6F23 The data structure is format 51, that has the following values:
RSDC(int) - Constructor for class com.ergotech.secs.RSDC: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
RSDC(SecsFormat) - Constructor for class com.ergotech.secs.RSDC
RSPACK - Class in com.ergotech.secs: Reset Spooling Acknoowledge.
RSPACK(byte) - Constructor for class com.ergotech.secs.RSPACK: Create a new message with binary (format 10) data.
RSPACK(SecsFormat) - Constructor for class com.ergotech.secs.RSPACK
rtuport - Static variable in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
run() - Method in class com.ergotech.secs.gem.CommunicationsHandler: Send S1F13 until we are no long in "ATTEMPT_ONLINE" state.
run() - Method in class com.ergotech.secs.HSMSActiveWrapper: Run waiting for a connection to be established.
run() - Method in class com.ergotech.secs.HSMSConnectionManager: Runs the port manager waiting for input on the socket that we were created for.
run() - Method in class com.ergotech.secs.HSMSSocketListener: runs the server and waits for input on the selected port.
run() - Method in class com.ergotech.secs.LinkTest: This will run until there is an error or the spacing is set to zero or less.
run() - Method in class com.ergotech.secs.NetLogger: runs the server and waits for input on the selected port.
run() - Method in class com.ergotech.secs.SecsIConnectionManager: Runs the port manager waiting for input on the socket that we were created for.
run() - Method in class com.ergotech.secs.SecsISocketManager: runs the server and waits for input on the selected port.
run() - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: The run method will sleep for a specified amount of time.
run() - Method in class com.ergotech.secs.TransactionManager: The watchdog code.
run() - Method in class com.ergotech.vib.manipulators.PassOnThread
run() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Listens on the port.
run() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Watch the serial port for incoming packets.
rwByte(int, byte) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
rwByte(byte, byte) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
rwBytes(int, byte[]) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
rwBytes(byte, byte[]) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator

S

S0F0 - Class in com.ergotech.secs: A general purpose method.
S0F0(SecsFormat) - Constructor for class com.ergotech.secs.S0F0: The data is assumed to be correct format and is not checked.
S0F0() - Constructor for class com.ergotech.secs.S0F0: The required default constructor.
S0F0(int, int, boolean, SecsFormat) - Constructor for class com.ergotech.secs.S0F0: Create the object with some useful parameters.
S100F1 - Class in com.ergotech.secs: Are You There Request.
S100F1() - Constructor for class com.ergotech.secs.S100F1: Required empty constructor.
S100F1(SecsFormat) - Constructor for class com.ergotech.secs.S100F1: The data is assumed to be correct format and is not checked.
S100F10 - Class in com.ergotech.secs
S100F10() - Constructor for class com.ergotech.secs.S100F10: Creates an empty message.
S100F10(SecsFormat) - Constructor for class com.ergotech.secs.S100F10: The data is assumed to be correct format and is not checked.
S100F10(SARM, ACKC5, TAGSN, V) - Constructor for class com.ergotech.secs.S100F10: Creates a new S100F10 message taking the data from the passed parameters.
S100F10(SecsFormat00) - Constructor for class com.ergotech.secs.S100F10: Creates this message from a list (Format00) of constants containing SARM, ACK5, TAGSN, V.
S100F105 - Class in com.ergotech.secs: Tag File Directory Read (FDR).
S100F105() - Constructor for class com.ergotech.secs.S100F105: Creates a new empty S100F105 message.
S100F105(SecsFormat) - Constructor for class com.ergotech.secs.S100F105: The data is assumed to be correct format and is not checked.
S100F105(TAGSER) - Constructor for class com.ergotech.secs.S100F105: Creates a new S100F105 message taking the data from the passed parameters.
S100F11 - Class in com.ergotech.secs
S100F11() - Constructor for class com.ergotech.secs.S100F11: Creates an empty message.
S100F11(SecsFormat) - Constructor for class com.ergotech.secs.S100F11: The data is assumed to be correct format and is not checked.
S100F11(SARM, MID) - Constructor for class com.ergotech.secs.S100F11: Creates a new S100F11 message taking the data from the passed parameters.
S100F11(SARM, SecsFormat00) - Constructor for class com.ergotech.secs.S100F11: Creates a new S100F11 message taking the data from the passed parameters.
S100F11(SecsFormat00) - Constructor for class com.ergotech.secs.S100F11: Creates this message from a list (Format00) of constants containing SARM, ACK5, TAGSN, V.
S100F13 - Class in com.ergotech.secs: Equipment Constant Request.
S100F13() - Constructor for class com.ergotech.secs.S100F13: Creates an empty message.
S100F13(ECID) - Constructor for class com.ergotech.secs.S100F13: Creates this message from one ECID.
S100F13(SecsFormat00) - Constructor for class com.ergotech.secs.S100F13: Creates this message from a list of ECIDs.
S100F13(SecsFormat) - Constructor for class com.ergotech.secs.S100F13: The data is assumed to be correct format and is not checked.
S100F14 - Class in com.ergotech.secs: New Equipment Constant Send (ECS).
S100F14() - Constructor for class com.ergotech.secs.S100F14: Creates an empty message.
S100F14(SecsFormat) - Constructor for class com.ergotech.secs.S100F14: The data is assumed to be correct format and is not checked.
S100F14(SecsFormat00) - Constructor for class com.ergotech.secs.S100F14: Creates this message from a list of ECVs.
S100F15 - Class in com.ergotech.secs: New Equipment Constant Send.
S100F15() - Constructor for class com.ergotech.secs.S100F15
S100F15(SecsFormat) - Constructor for class com.ergotech.secs.S100F15: The data is assumed to be correct format and is not checked.
S100F15(TAGSER, TIMEFORMAT, HINTEG, AREYOUTHERE, RESETENA) - Constructor for class com.ergotech.secs.S100F15: Creates a new S100F15 message taking the data from the passed parameters.
S100F15(SecsFormat00) - Constructor for class com.ergotech.secs.S100F15: Creates this message from a list (Format00) of constants containing TAGSER , TIMEFORMAT ,HINTEG ,AREYOUTHERE ,RESETENA .
S100F16 - Class in com.ergotech.secs: New Equipment Constant Acknowledge.
S100F16() - Constructor for class com.ergotech.secs.S100F16: Creates a new empty S2F16 message.
S100F16(EAC) - Constructor for class com.ergotech.secs.S100F16: Creates a new S2F16 message taking the data from the passed parameters.
S100F16(SecsFormat) - Constructor for class com.ergotech.secs.S100F16: The data is assumed to be correct format and is not checked.
S100F17 - Class in com.ergotech.secs: Date And Time Request.
S100F17() - Constructor for class com.ergotech.secs.S100F17: Creates a new empty S2F17 message.
S100F17(SecsFormat) - Constructor for class com.ergotech.secs.S100F17: The data is assumed to be correct format and is not checked.
S100F18 - Class in com.ergotech.secs: Data And Time Data.
S100F18() - Constructor for class com.ergotech.secs.S100F18: Creates a new empty S2F18 message.
S100F18(TIME) - Constructor for class com.ergotech.secs.S100F18: Creates a new S2F18 message taking the data from the passed parameters.
S100F18(SecsFormat) - Constructor for class com.ergotech.secs.S100F18: The data is assumed to be correct format and is not checked.
S100F2 - Class in com.ergotech.secs: On Line Data.
S100F2() - Constructor for class com.ergotech.secs.S100F2: Required empty constructor.
S100F2(SecsFormat) - Constructor for class com.ergotech.secs.S100F2: The data is assumed to be correct format and is not checked.
S100F2(MDLN, SOFTREV) - Constructor for class com.ergotech.secs.S100F2: Creates this message from and MDLN and a SOFTREV object.
S100F2(SecsFormat00) - Constructor for class com.ergotech.secs.S100F2: Creates this message from a SecsFormat.
S100F31 - Class in com.ergotech.secs: Date And Time Set Request.
S100F31() - Constructor for class com.ergotech.secs.S100F31: Creates a new empty S100F31 message.
S100F31(SecsFormat) - Constructor for class com.ergotech.secs.S100F31: The data is assumed to be correct format and is not checked.
S100F31(TIME) - Constructor for class com.ergotech.secs.S100F31: Creates a new S100F31 message taking the data from the passed parameters.
S100F32 - Class in com.ergotech.secs: Date And Time Set Acknowledge.
S100F32() - Constructor for class com.ergotech.secs.S100F32: Creates a new empty S100F32 message.
S100F32(TIACK) - Constructor for class com.ergotech.secs.S100F32: Creates a new S100F32 message taking the data from the passed parameters.
S100F32(SecsFormat) - Constructor for class com.ergotech.secs.S100F32: The data is assumed to be correct format and is not checked.
S100F7 - Class in com.ergotech.secs
S100F7() - Constructor for class com.ergotech.secs.S100F7: Creates an empty message.
S100F7(SecsFormat) - Constructor for class com.ergotech.secs.S100F7: The data is assumed to be correct format and is not checked.
S100F7(SARM, PODEVENT, ACKC5, TAGSN, V) - Constructor for class com.ergotech.secs.S100F7: Creates a new S100F7 message taking the data from the passed parameters.
S100F7(SecsFormat00) - Constructor for class com.ergotech.secs.S100F7: Creates this message from a list (Format00) of constants containing SARM, PODEVENT, ACKC5, TAGSN, V.
S100F8 - Class in com.ergotech.secs: S100F8
S100F8() - Constructor for class com.ergotech.secs.S100F8: Creates a new empty S100F8 message.
S100F8(SecsFormat) - Constructor for class com.ergotech.secs.S100F8: The data is assumed to be correct format and is not checked.
S100F9 - Class in com.ergotech.secs: New Equipment Constant Acknowledge.
S100F9() - Constructor for class com.ergotech.secs.S100F9: Creates a new empty S100F9 message.
S100F9(EAC) - Constructor for class com.ergotech.secs.S100F9: Creates a new S100F9 message taking the data from the passed parameters.
S100F9(SecsFormat) - Constructor for class com.ergotech.secs.S100F9: The data is assumed to be correct format and is not checked.
S10F0 - Class in com.ergotech.secs: Abort Transaction.
S10F0() - Constructor for class com.ergotech.secs.S10F0: Required empty constructor.
S10F0(SecsFormat) - Constructor for class com.ergotech.secs.S10F0: Dummy SecsFormat constructor.
S10F1 - Class in com.ergotech.secs: Terminal Request (TRN).
S10F1() - Constructor for class com.ergotech.secs.S10F1: Required empty constructor.
S10F1(SecsFormat) - Constructor for class com.ergotech.secs.S10F1: The data is assumed to be correct format and is not checked.
S10F1(TID, TEXT) - Constructor for class com.ergotech.secs.S10F1: Creates this message from and TID,TEXT object.
S10F1(SecsFormat00) - Constructor for class com.ergotech.secs.S10F1: Creates this message from a SecsFormat.
S10F2 - Class in com.ergotech.secs: Terminal Request Acknowledge (TRA).
S10F2() - Constructor for class com.ergotech.secs.S10F2: Creates a new empty S10F6 message.
S10F2(SecsFormat) - Constructor for class com.ergotech.secs.S10F2: The data is assumed to be correct format and is not checked.
S10F2(ACKC10) - Constructor for class com.ergotech.secs.S10F2: Creates a new S10F2 message taking the data from the passed parameters.
S10F3 - Class in com.ergotech.secs: Terminal Display Single (VTN).
S10F3() - Constructor for class com.ergotech.secs.S10F3: Required empty constructor.
S10F3(SecsFormat) - Constructor for class com.ergotech.secs.S10F3: The data is assumed to be correct format and is not checked.
S10F3(TID, TEXT) - Constructor for class com.ergotech.secs.S10F3: Creates this message from and TID,TEXT object.
S10F3(SecsFormat00) - Constructor for class com.ergotech.secs.S10F3: Creates this message from a SecsFormat.
S10F4 - Class in com.ergotech.secs: Terminal Display, Single Acknowledge (VTA).
S10F4() - Constructor for class com.ergotech.secs.S10F4: Creates a new empty S10F6 message.
S10F4(SecsFormat) - Constructor for class com.ergotech.secs.S10F4: The data is assumed to be correct format and is not checked.
S10F4(ACKC10) - Constructor for class com.ergotech.secs.S10F4: Creates a new S10F4 message taking the data from the passed parameters.
S10F5 - Class in com.ergotech.secs: Terminal Display, Multi-Block (VTN).
S10F5() - Constructor for class com.ergotech.secs.S10F5: Required empty constructor.
S10F5(SecsFormat) - Constructor for class com.ergotech.secs.S10F5: The data is assumed to be correct format and is not checked.
S10F5(TID, TEXT) - Constructor for class com.ergotech.secs.S10F5: Creates this message from and TID,TEXT object.
S10F5(SecsFormat00) - Constructor for class com.ergotech.secs.S10F5: Creates this message from a SecsFormat.
S10F6 - Class in com.ergotech.secs: Terminal Display, Multi-Block Acknowledge (VMA).
S10F6() - Constructor for class com.ergotech.secs.S10F6: Creates a new empty S10F6 message.
S10F6(SecsFormat) - Constructor for class com.ergotech.secs.S10F6: The data is assumed to be correct format and is not checked.
S10F6(ACKC10) - Constructor for class com.ergotech.secs.S10F6: Creates a new S10F6 message taking the data from the passed parameters.
S15F0 - Class in com.ergotech.secs: Abort Transaction.
S15F0() - Constructor for class com.ergotech.secs.S15F0: Required empty constructor.
S15F0(SecsFormat) - Constructor for class com.ergotech.secs.S15F0: Dummy SecsFormat constructor.
S15F1 - Class in com.ergotech.secs: On Line Data.
S15F1() - Constructor for class com.ergotech.secs.S15F1: Required empty constructor.
S15F1(SecsFormat) - Constructor for class com.ergotech.secs.S15F1: The data is assumed to be correct format and is not checked.
S15F1(DATAID, RCPSPEC, RMDATASIZE) - Constructor for class com.ergotech.secs.S15F1: Creates this message from and MDLN and a SOFTREV object.
S15F10 - Class in com.ergotech.secs: On Line Data.
S15F10() - Constructor for class com.ergotech.secs.S15F10: Required empty constructor.
S15F10(SecsFormat) - Constructor for class com.ergotech.secs.S15F10: The data is assumed to be correct format and is not checked.
S15F10(RCPSTAT, RCPVERS, RMACK) - Constructor for class com.ergotech.secs.S15F10: Creates this message from and RMACK and no errors.
S15F11 - Class in com.ergotech.secs: On Line Data.
S15F11() - Constructor for class com.ergotech.secs.S15F11: Required empty constructor.
S15F11(SecsFormat) - Constructor for class com.ergotech.secs.S15F11: The data is assumed to be correct format and is not checked.
S15F11(RMNSSPEC, RCPCLASS, RCPNAME, AGENT) - Constructor for class com.ergotech.secs.S15F11: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F12 - Class in com.ergotech.secs: Recipe Version Data
S15F12() - Constructor for class com.ergotech.secs.S15F12: Required empty constructor.
S15F12(SecsFormat) - Constructor for class com.ergotech.secs.S15F12: The data is assumed to be correct format and is not checked.
S15F12(AGENT, RCPVERS, RMACK) - Constructor for class com.ergotech.secs.S15F12: Creates this message from and RMACK and no errors.
S15F13 - Class in com.ergotech.secs: Recipe Create Request
S15F13() - Constructor for class com.ergotech.secs.S15F13: Required empty constructor.
S15F13(SecsFormat) - Constructor for class com.ergotech.secs.S15F13: The data is assumed to be correct format and is not checked.
S15F14 - Class in com.ergotech.secs: On Line Data.
S15F14() - Constructor for class com.ergotech.secs.S15F14: Required empty constructor.
S15F14(SecsFormat) - Constructor for class com.ergotech.secs.S15F14: The data is assumed to be correct format and is not checked.
S15F14(RMACK) - Constructor for class com.ergotech.secs.S15F14: Creates this message from and RMNSSPEC and no errors.
S15F15 - Class in com.ergotech.secs: Recipe Store Request.
S15F15() - Constructor for class com.ergotech.secs.S15F15: Required empty constructor.
S15F15(SecsFormat) - Constructor for class com.ergotech.secs.S15F15: The data is assumed to be correct format and is not checked.
S15F16 - Class in com.ergotech.secs: On Line Data.
S15F16() - Constructor for class com.ergotech.secs.S15F16: Required empty constructor.
S15F16(SecsFormat) - Constructor for class com.ergotech.secs.S15F16: The data is assumed to be correct format and is not checked.
S15F16(RMSPACE, RMACK) - Constructor for class com.ergotech.secs.S15F16: Creates this message from and RMACK and no errors.
S15F17 - Class in com.ergotech.secs: On Line Data.
S15F17() - Constructor for class com.ergotech.secs.S15F17: Required empty constructor.
S15F17(SecsFormat) - Constructor for class com.ergotech.secs.S15F17: The data is assumed to be correct format and is not checked.
S15F17(RCPSPEC, RCPSECCODE) - Constructor for class com.ergotech.secs.S15F17: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F18 - Class in com.ergotech.secs: Recipe Store Request.
S15F18() - Constructor for class com.ergotech.secs.S15F18: Required empty constructor.
S15F18(SecsFormat) - Constructor for class com.ergotech.secs.S15F18: The data is assumed to be correct format and is not checked.
S15F19 - Class in com.ergotech.secs: On Line Data.
S15F19() - Constructor for class com.ergotech.secs.S15F19: Required empty constructor.
S15F19(SecsFormat) - Constructor for class com.ergotech.secs.S15F19: The data is assumed to be correct format and is not checked.
S15F19(RCPSPEC, RCPRENAME, RCPNEWID) - Constructor for class com.ergotech.secs.S15F19: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F2 - Class in com.ergotech.secs: Recipe Managerment Multi-block Grant.
S15F2() - Constructor for class com.ergotech.secs.S15F2: Required empty constructor.
S15F2(SecsFormat) - Constructor for class com.ergotech.secs.S15F2: The data is assumed to be correct format and is not checked.
S15F2(RMGRNT) - Constructor for class com.ergotech.secs.S15F2: Creates this message from one GRANT6.
S15F20 - Class in com.ergotech.secs: On Line Data.
S15F20() - Constructor for class com.ergotech.secs.S15F20: Required empty constructor.
S15F20(SecsFormat) - Constructor for class com.ergotech.secs.S15F20: The data is assumed to be correct format and is not checked.
S15F20(RMACK) - Constructor for class com.ergotech.secs.S15F20: Creates this message from and RMNSSPEC and no errors.
S15F21 - Class in com.ergotech.secs: On Line Data.
S15F21() - Constructor for class com.ergotech.secs.S15F21: Required empty constructor.
S15F21(SecsFormat) - Constructor for class com.ergotech.secs.S15F21: The data is assumed to be correct format and is not checked.
S15F21(DATAID, RCPCMD, RMNSSPEC, OPID, AGENT, RCPID) - Constructor for class com.ergotech.secs.S15F21: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F21(DATAID, RCPCMD, RMNSSPEC, OPID, AGENT, SecsFormat00) - Constructor for class com.ergotech.secs.S15F21: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F22 - Class in com.ergotech.secs: On Line Data.
S15F22() - Constructor for class com.ergotech.secs.S15F22: Required empty constructor.
S15F22(SecsFormat) - Constructor for class com.ergotech.secs.S15F22: The data is assumed to be correct format and is not checked.
S15F22(AGENT, LINKID, RCPCMD, RMACK) - Constructor for class com.ergotech.secs.S15F22: Creates this message from and RMACK and no errors.
S15F23 - Class in com.ergotech.secs: On Line Data.
S15F23() - Constructor for class com.ergotech.secs.S15F23: Required empty constructor.
S15F23(SecsFormat) - Constructor for class com.ergotech.secs.S15F23: The data is assumed to be correct format and is not checked.
S15F23(DATAID, OBJSPEC, RCPID) - Constructor for class com.ergotech.secs.S15F23: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F23(DATAID, OBJSPEC, SecsFormat00) - Constructor for class com.ergotech.secs.S15F23: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F24 - Class in com.ergotech.secs: Recipe Store Request.
S15F24() - Constructor for class com.ergotech.secs.S15F24: Required empty constructor.
S15F24(SecsFormat) - Constructor for class com.ergotech.secs.S15F24: The data is assumed to be correct format and is not checked.
S15F25 - Class in com.ergotech.secs: On Line Data.
S15F25() - Constructor for class com.ergotech.secs.S15F25: Required empty constructor.
S15F25(SecsFormat) - Constructor for class com.ergotech.secs.S15F25: The data is assumed to be correct format and is not checked.
S15F26 - Class in com.ergotech.secs: On Line Data.
S15F26() - Constructor for class com.ergotech.secs.S15F26: Required empty constructor.
S15F26(SecsFormat) - Constructor for class com.ergotech.secs.S15F26: The data is assumed to be correct format and is not checked.
S15F26(RMACK) - Constructor for class com.ergotech.secs.S15F26: Creates this message from and RMNSSPEC and no errors.
S15F27 - Class in com.ergotech.secs: On Line Data.
S15F27() - Constructor for class com.ergotech.secs.S15F27: Required empty constructor.
S15F27(SecsFormat) - Constructor for class com.ergotech.secs.S15F27: The data is assumed to be correct format and is not checked.
S15F28 - Class in com.ergotech.secs: Recipe Store Request.
S15F28() - Constructor for class com.ergotech.secs.S15F28: Required empty constructor.
S15F28(SecsFormat) - Constructor for class com.ergotech.secs.S15F28: The data is assumed to be correct format and is not checked.
S15F29 - Class in com.ergotech.secs: On Line Data.
S15F29() - Constructor for class com.ergotech.secs.S15F29: Required empty constructor.
S15F29(SecsFormat) - Constructor for class com.ergotech.secs.S15F29: The data is assumed to be correct format and is not checked.
S15F29(DATAID, OPID, RESPEC, RCPID) - Constructor for class com.ergotech.secs.S15F29: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F29(DATAID, OPID, RESPEC, SecsFormat00) - Constructor for class com.ergotech.secs.S15F29: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F3 - Class in com.ergotech.secs: On Line Data.
S15F3() - Constructor for class com.ergotech.secs.S15F3: Required empty constructor.
S15F3(SecsFormat) - Constructor for class com.ergotech.secs.S15F3: The data is assumed to be correct format and is not checked.
S15F3(RMNSSPEC, RMNSCMD) - Constructor for class com.ergotech.secs.S15F3: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F30 - Class in com.ergotech.secs: Recipe Store Request.
S15F30() - Constructor for class com.ergotech.secs.S15F30: Required empty constructor.
S15F30(SecsFormat) - Constructor for class com.ergotech.secs.S15F30: The data is assumed to be correct format and is not checked.
S15F31 - Class in com.ergotech.secs: On Line Data.
S15F31() - Constructor for class com.ergotech.secs.S15F31: Required empty constructor.
S15F31(SecsFormat) - Constructor for class com.ergotech.secs.S15F31: The data is assumed to be correct format and is not checked.
S15F31(RCPSPEC) - Constructor for class com.ergotech.secs.S15F31: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F32 - Class in com.ergotech.secs: Recipe Store Request.
S15F32() - Constructor for class com.ergotech.secs.S15F32: Required empty constructor.
S15F32(SecsFormat) - Constructor for class com.ergotech.secs.S15F32: The data is assumed to be correct format and is not checked.
S15F33 - Class in com.ergotech.secs: Recipe Store Request.
S15F33() - Constructor for class com.ergotech.secs.S15F33: Required empty constructor.
S15F33(SecsFormat) - Constructor for class com.ergotech.secs.S15F33: The data is assumed to be correct format and is not checked.
S15F34 - Class in com.ergotech.secs: On Line Data.
S15F34() - Constructor for class com.ergotech.secs.S15F34: Required empty constructor.
S15F34(SecsFormat) - Constructor for class com.ergotech.secs.S15F34: The data is assumed to be correct format and is not checked.
S15F34(RMACK) - Constructor for class com.ergotech.secs.S15F34: Creates this message from and RMNSSPEC and no errors.
S15F35 - Class in com.ergotech.secs: On Line Data.
S15F35() - Constructor for class com.ergotech.secs.S15F35: Required empty constructor.
S15F35(SecsFormat) - Constructor for class com.ergotech.secs.S15F35: The data is assumed to be correct format and is not checked.
S15F35(DATAID, RESPEC, RCPDEL, RCPID) - Constructor for class com.ergotech.secs.S15F35: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F35(DATAID, RESPEC, RCPDEL, SecsFormat00) - Constructor for class com.ergotech.secs.S15F35: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F36 - Class in com.ergotech.secs: On Line Data.
S15F36() - Constructor for class com.ergotech.secs.S15F36: Required empty constructor.
S15F36(SecsFormat) - Constructor for class com.ergotech.secs.S15F36: The data is assumed to be correct format and is not checked.
S15F36(RMACK) - Constructor for class com.ergotech.secs.S15F36: Creates this message from and RMNSSPEC and no errors.
S15F37 - Class in com.ergotech.secs: On Line Data.
S15F37() - Constructor for class com.ergotech.secs.S15F37: Required empty constructor.
S15F37(SecsFormat) - Constructor for class com.ergotech.secs.S15F37: The data is assumed to be correct format and is not checked.
S15F37(RMSEGSPEC, OBJTOKEN, RMGRNT, OPID, RCPID, RMCHGTYPE) - Constructor for class com.ergotech.secs.S15F37: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F38 - Class in com.ergotech.secs: On Line Data.
S15F38() - Constructor for class com.ergotech.secs.S15F38: Required empty constructor.
S15F38(SecsFormat) - Constructor for class com.ergotech.secs.S15F38: The data is assumed to be correct format and is not checked.
S15F38(RMACK) - Constructor for class com.ergotech.secs.S15F38: Creates this message from and RMNSSPEC and no errors.
S15F39 - Class in com.ergotech.secs: On Line Data.
S15F39() - Constructor for class com.ergotech.secs.S15F39: Required empty constructor.
S15F39(SecsFormat) - Constructor for class com.ergotech.secs.S15F39: The data is assumed to be correct format and is not checked.
S15F39(DATAID, RMNSCMD, RMRECSPEC, RMSEGSPEC, OBJTOKEN) - Constructor for class com.ergotech.secs.S15F39: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F4 - Class in com.ergotech.secs: On Line Data.
S15F4() - Constructor for class com.ergotech.secs.S15F4: Required empty constructor.
S15F4(SecsFormat) - Constructor for class com.ergotech.secs.S15F4: The data is assumed to be correct format and is not checked.
S15F4(RMNSSPEC) - Constructor for class com.ergotech.secs.S15F4: Creates this message from and RMNSSPEC and no errors.
S15F40 - Class in com.ergotech.secs: On Line Data.
S15F40() - Constructor for class com.ergotech.secs.S15F40: Required empty constructor.
S15F40(SecsFormat) - Constructor for class com.ergotech.secs.S15F40: The data is assumed to be correct format and is not checked.
S15F40(RMACK) - Constructor for class com.ergotech.secs.S15F40: Creates this message from and RMNSSPEC and no errors.
S15F41 - Class in com.ergotech.secs: On Line Data.
S15F41() - Constructor for class com.ergotech.secs.S15F41: Required empty constructor.
S15F41(SecsFormat) - Constructor for class com.ergotech.secs.S15F41: The data is assumed to be correct format and is not checked.
S15F41(DATAID, RMRECSPEC, OBJTOKEN, RMNSCMD, RCPID) - Constructor for class com.ergotech.secs.S15F41: Creates this message.
S15F41(DATAID, RMRECSPEC, OBJTOKEN, RMNSCMD, RCPID, RCPNEWID, RMSEGSPEC, RMCHGTYPE, OPID, TIMESTAMP, RMREQUESTOR) - Constructor for class com.ergotech.secs.S15F41: Creates this message.
S15F42 - Class in com.ergotech.secs: On Line Data.
S15F42() - Constructor for class com.ergotech.secs.S15F42: Required empty constructor.
S15F42(SecsFormat) - Constructor for class com.ergotech.secs.S15F42: The data is assumed to be correct format and is not checked.
S15F42(RMACK) - Constructor for class com.ergotech.secs.S15F42: Creates this message from and RMNSSPEC and no errors.
S15F43 - Class in com.ergotech.secs: On Line Data.
S15F43() - Constructor for class com.ergotech.secs.S15F43: Required empty constructor.
S15F43(SecsFormat) - Constructor for class com.ergotech.secs.S15F43: The data is assumed to be correct format and is not checked.
S15F43(DATAID, OBJSPEC) - Constructor for class com.ergotech.secs.S15F43: Creates this message.
S15F43(DATAID, OBJSPEC, TARGETSPEC) - Constructor for class com.ergotech.secs.S15F43: Creates this message.
S15F44 - Class in com.ergotech.secs: DRNS Get Change Request Data
S15F44() - Constructor for class com.ergotech.secs.S15F44: Required empty constructor.
S15F44(SecsFormat) - Constructor for class com.ergotech.secs.S15F44: The data is assumed to be correct format and is not checked.
S15F45 - Class in com.ergotech.secs: DRNS Manager Segment Change Approval Request.
S15F45() - Constructor for class com.ergotech.secs.S15F45: Required empty constructor.
S15F45(SecsFormat) - Constructor for class com.ergotech.secs.S15F45: The data is assumed to be correct format and is not checked.
S15F45(DATAID, RCPSPEC, RCPNEWID, RMCHGTYPE) - Constructor for class com.ergotech.secs.S15F45: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F46 - Class in com.ergotech.secs: DRNS Manger Segment Approval Acknowledge
S15F46() - Constructor for class com.ergotech.secs.S15F46: Required empty constructor.
S15F46(SecsFormat) - Constructor for class com.ergotech.secs.S15F46: The data is assumed to be correct format and is not checked.
S15F46(RMCHGTYPE, RMGRNT, OPID) - Constructor for class com.ergotech.secs.S15F46: Creates this message.
S15F47 - Class in com.ergotech.secs: DRNS Manager Rebuild Request
S15F47() - Constructor for class com.ergotech.secs.S15F47: Required empty constructor.
S15F47(SecsFormat) - Constructor for class com.ergotech.secs.S15F47: The data is assumed to be correct format and is not checked.
S15F47(DATAID, OBJSPEC, RMNSSPEC, RMRECSPEC, RCPID) - Constructor for class com.ergotech.secs.S15F47: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F47(DATAID, OBJSPEC, RMNSSPEC, RMRECSPEC, SecsFormat00) - Constructor for class com.ergotech.secs.S15F47: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F48 - Class in com.ergotech.secs: On Line Data.
S15F48() - Constructor for class com.ergotech.secs.S15F48: Required empty constructor.
S15F48(SecsFormat) - Constructor for class com.ergotech.secs.S15F48: The data is assumed to be correct format and is not checked.
S15F48(RMACK) - Constructor for class com.ergotech.secs.S15F48: Creates this message from and RMNSSPEC and no errors.
S15F5 - Class in com.ergotech.secs: On Line Data.
S15F5() - Constructor for class com.ergotech.secs.S15F5: Required empty constructor.
S15F5(SecsFormat) - Constructor for class com.ergotech.secs.S15F5: The data is assumed to be correct format and is not checked.
S15F5(RMNSSPEC, RMNEWNS) - Constructor for class com.ergotech.secs.S15F5: Creates this message from and RMNSSPEC and a RMNSCMD object.
S15F6 - Class in com.ergotech.secs: On Line Data.
S15F6() - Constructor for class com.ergotech.secs.S15F6: Required empty constructor.
S15F6(SecsFormat) - Constructor for class com.ergotech.secs.S15F6: The data is assumed to be correct format and is not checked.
S15F6(RMACK) - Constructor for class com.ergotech.secs.S15F6: Creates this message from and RMACK and no errors.
S15F7 - Class in com.ergotech.secs: On Line Data.
S15F7() - Constructor for class com.ergotech.secs.S15F7: Required empty constructor.
S15F7(SecsFormat) - Constructor for class com.ergotech.secs.S15F7: The data is assumed to be correct format and is not checked.
S15F7(OBJSPEC) - Constructor for class com.ergotech.secs.S15F7: Creates this message from and OBJSPEC.
S15F8 - Class in com.ergotech.secs: On Line Data.
S15F8() - Constructor for class com.ergotech.secs.S15F8: Required empty constructor.
S15F8(SecsFormat) - Constructor for class com.ergotech.secs.S15F8: The data is assumed to be correct format and is not checked.
S15F8(RMSPACE, RMACK) - Constructor for class com.ergotech.secs.S15F8: Creates this message from and RMACK and no errors.
S15F9 - Class in com.ergotech.secs: On Line Data.
S15F9() - Constructor for class com.ergotech.secs.S15F9: Required empty constructor.
S15F9(SecsFormat) - Constructor for class com.ergotech.secs.S15F9: The data is assumed to be correct format and is not checked.
S15F9(RCPSPEC) - Constructor for class com.ergotech.secs.S15F9: Creates this message from and OBJSPEC.
S1F0 - Class in com.ergotech.secs: Abort Transaction.
S1F0() - Constructor for class com.ergotech.secs.S1F0: Required empty constructor.
S1F0(SecsFormat) - Constructor for class com.ergotech.secs.S1F0: Dummy SecsFormat constructor.
S1F1(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Respond to an S1F1.
S1F1 - Class in com.ergotech.secs: Are You There Request.
S1F1() - Constructor for class com.ergotech.secs.S1F1: Required empty constructor.
S1F1(SecsFormat) - Constructor for class com.ergotech.secs.S1F1: Dummy SecsFormat constructor.
S1F10 - Class in com.ergotech.secs: Material Transfer Status Data (TSD).
S1F10() - Constructor for class com.ergotech.secs.S1F10: Required empty constructor.
S1F10(SecsFormat) - Constructor for class com.ergotech.secs.S1F10: The data is assumed to be correct format and is not checked.
S1F10(TSIP, TSOP) - Constructor for class com.ergotech.secs.S1F10: Creates a new S1F10 message taking the data from the passed parameters.
S1F11(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S1F11 and sends an S1F12.
S1F11 - Class in com.ergotech.secs: Status Variable Namelist Request(SVNR).
S1F11() - Constructor for class com.ergotech.secs.S1F11: Required empty constructor.
S1F11(SecsFormat) - Constructor for class com.ergotech.secs.S1F11: The data is assumed to be correct format and is not checked.
S1F11(SVID) - Constructor for class com.ergotech.secs.S1F11: Creates a new S1F11 message taking the data from the passed parameters.
S1F12 - Class in com.ergotech.secs: Status Variable Namelist Reply (SVNRR).
S1F12() - Constructor for class com.ergotech.secs.S1F12: Required empty constructor.
S1F12(SecsFormat) - Constructor for class com.ergotech.secs.S1F12: The data is assumed to be correct format and is not checked.
S1F12(SVID, SVNAME, UNITS) - Constructor for class com.ergotech.secs.S1F12: Creates a new S1F12 message taking the data from the passed parameters.
S1F12(SecsFormat00) - Constructor for class com.ergotech.secs.S1F12: Creates this message from a list (Format00) of constants containing a SVID, SVNAME, UNITS.
S1F13(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S21F13 and sends an S2F14.
S1F13(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: This will allow S1F13's to go through if offline.
S1F13 - Class in com.ergotech.secs: Establish Communications Request.
S1F13() - Constructor for class com.ergotech.secs.S1F13: Required empty constructor.
S1F13(SecsFormat) - Constructor for class com.ergotech.secs.S1F13: The data is assumed to be correct format and is not checked.
S1F13(MDLN, SOFTREV) - Constructor for class com.ergotech.secs.S1F13: Creates a new message taking the data from the passed parameters.
S1F13(SecsFormat00) - Constructor for class com.ergotech.secs.S1F13: Creates this message from a list.
S1F14(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: This will allow the replys to a S1F14 to go through.
S1F14 - Class in com.ergotech.secs: Establish Communications Request Acknowledge.
S1F14() - Constructor for class com.ergotech.secs.S1F14: Required empty constructor.
S1F14(SecsFormat) - Constructor for class com.ergotech.secs.S1F14: The data is assumed to be correct format and is not checked.
S1F14(byte, SecsFormat) - Constructor for class com.ergotech.secs.S1F14: Creates a new message taking the data from the passed parameters.
S1F14(COMMACK, MDLN, SOFTREV) - Constructor for class com.ergotech.secs.S1F14: Creates a new message taking the data from the passed parameters.
S1F14(SecsFormat00) - Constructor for class com.ergotech.secs.S1F14: Creates this message from a list.
S1F15(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: Request OFF-LINE.
S1F15 - Class in com.ergotech.secs: Request On-Line.
S1F15() - Constructor for class com.ergotech.secs.S1F15: Required empty constructor.
S1F15(SecsFormat) - Constructor for class com.ergotech.secs.S1F15: Dummy SecsFormat constructor.
S1F16 - Class in com.ergotech.secs: On-Line Acknowledge.
S1F16() - Constructor for class com.ergotech.secs.S1F16: Required empty constructor.
S1F16(SecsFormat) - Constructor for class com.ergotech.secs.S1F16: The data is assumed to be correct format and is not checked.
S1F16(OFLACK) - Constructor for class com.ergotech.secs.S1F16: Creates this message from one OFLACK.
S1F17(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: Request ON-LINE.
S1F17 - Class in com.ergotech.secs: Request On-Line.
S1F17() - Constructor for class com.ergotech.secs.S1F17: Required empty constructor.
S1F17(SecsFormat) - Constructor for class com.ergotech.secs.S1F17: Dummy SecsFormat constructor.
S1F18 - Class in com.ergotech.secs: On-Line Acknowledge.
S1F18() - Constructor for class com.ergotech.secs.S1F18: Required empty constructor.
S1F18(SecsFormat) - Constructor for class com.ergotech.secs.S1F18: The data is assumed to be correct format and is not checked.
S1F18(ONLACK) - Constructor for class com.ergotech.secs.S1F18: Creates this message from one ONLACK.
S1F19 - Class in com.ergotech.secs: S1F19 Get Attribute.
S1F19() - Constructor for class com.ergotech.secs.S1F19: Required empty constructor.
S1F19(SecsFormat00) - Constructor for class com.ergotech.secs.S1F19: Creates this message from one SecsFormat00.
S1F19(SecsFormat) - Constructor for class com.ergotech.secs.S1F19: The data is assumed to be correct format and is not checked.
S1F19(OBJTYPE, OBJID, ATTRID) - Constructor for class com.ergotech.secs.S1F19: Creates a new S1F19 message taking the data from the passed parameters.
S1F2 - Class in com.ergotech.secs: On Line Data.
S1F2() - Constructor for class com.ergotech.secs.S1F2: Required empty constructor.
S1F2(SecsFormat) - Constructor for class com.ergotech.secs.S1F2: The data is assumed to be correct format and is not checked.
S1F2(MDLN, SOFTREV) - Constructor for class com.ergotech.secs.S1F2: Creates this message from and MDLN and a SOFTREV object.
S1F2(SecsFormat00) - Constructor for class com.ergotech.secs.S1F2: Creates this message from a SecsFormat.
S1F20 - Class in com.ergotech.secs: S1F20 Attribute Data.
S1F20() - Constructor for class com.ergotech.secs.S1F20: Required empty constructor.
S1F20(SecsFormat00) - Constructor for class com.ergotech.secs.S1F20: Creates this message from one SecsFormat00.
S1F20(SecsFormat) - Constructor for class com.ergotech.secs.S1F20: The data is assumed to be correct format and is not checked.
S1F20(ATTRDATA, ERRCODE, ERRTEXT) - Constructor for class com.ergotech.secs.S1F20: Creates a new S1F20 message taking the data from the passed parameters.
S1F21(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S1F21 and sends an S1F22.
S1F23(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S1F23 (CEID list request) and sends an S1F24 reply.
S1F3(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S1F3 and sends an S1F4.
S1F3 - Class in com.ergotech.secs: Selected Equipment Status Request.
S1F3() - Constructor for class com.ergotech.secs.S1F3: Required empty constructor.
S1F3(SVID) - Constructor for class com.ergotech.secs.S1F3: Creates this message from one SVID.
S1F3(SecsFormat) - Constructor for class com.ergotech.secs.S1F3: The data is assumed to be correct format and is not checked.
S1F3(SecsFormat00) - Constructor for class com.ergotech.secs.S1F3: Creates this message from a list of SVIDs.
S1F4 - Class in com.ergotech.secs: Selected Equipment Status Data.
S1F4() - Constructor for class com.ergotech.secs.S1F4: Required empty constructor.
S1F4(SecsFormat) - Constructor for class com.ergotech.secs.S1F4: The data is assumed to be correct format and is not checked.
S1F4(SV) - Constructor for class com.ergotech.secs.S1F4: Creates this message from one SV.
S1F4(SecsFormat00) - Constructor for class com.ergotech.secs.S1F4: Creates this message from a SecsFormat00.
S1F5 - Class in com.ergotech.secs: Formatted Status Request.
S1F5() - Constructor for class com.ergotech.secs.S1F5: Required empty constructor.
S1F5(SFCD) - Constructor for class com.ergotech.secs.S1F5: Creates this message from one SFCD.
S1F5(SecsFormat) - Constructor for class com.ergotech.secs.S1F5: The data is assumed to be correct format and is not checked.
S1F6 - Class in com.ergotech.secs
S1F6() - Constructor for class com.ergotech.secs.S1F6
S1F6(SecsFormat) - Constructor for class com.ergotech.secs.S1F6: The data is assumed to be correct format and is not checked.
S1F7 - Class in com.ergotech.secs: Fixed Form Request (FFR).
S1F7() - Constructor for class com.ergotech.secs.S1F7: Required empty constructor.
S1F7(SecsFormat) - Constructor for class com.ergotech.secs.S1F7: The data is assumed to be correct format and is not checked.
S1F7(SFCD) - Constructor for class com.ergotech.secs.S1F7: Creates this message from one SFCD.
S1F8 - Class in com.ergotech.secs
S1F8() - Constructor for class com.ergotech.secs.S1F8: Required empty constructor.
S1F8(SecsFormat) - Constructor for class com.ergotech.secs.S1F8: Creates this message .
S1F9 - Class in com.ergotech.secs: Material Transfer Status Request (TSR).
S1F9() - Constructor for class com.ergotech.secs.S1F9: Required empty constructor.
S1F9(SecsFormat) - Constructor for class com.ergotech.secs.S1F9: Dummy SecsFormat constructor.
S2F0 - Class in com.ergotech.secs: Abort Transaction.
S2F0() - Constructor for class com.ergotech.secs.S2F0: Required empty constructor.
S2F0(SecsFormat) - Constructor for class com.ergotech.secs.S2F0: Dummy SecsFormat constructor.
S2F1 - Class in com.ergotech.secs: This message is used to initiate the transfer of a process program or to select from stored programs.
S2F1() - Constructor for class com.ergotech.secs.S2F1: Required empty constructor.
S2F1(SPID, LENGTH) - Constructor for class com.ergotech.secs.S2F1: Creates a new S2F1 message taking the data from the passed parameters.
S2F1(SecsFormat) - Constructor for class com.ergotech.secs.S2F1: The data is assumed to be correct format and is not checked.
S2F10 - Class in com.ergotech.secs: This message transfers a Service program.
S2F10() - Constructor for class com.ergotech.secs.S2F10: Creates a new empty S2F10 message.
S2F10(SecsFormat) - Constructor for class com.ergotech.secs.S2F10: The data is assumed to be correct format and is not checked.
S2F10(SPR) - Constructor for class com.ergotech.secs.S2F10: Creates a new S2F10 message taking the data from the passed parameters.
S2F11 - Class in com.ergotech.secs: Service Program Directory Request.
S2F11() - Constructor for class com.ergotech.secs.S2F11: Creates a new empty S2F11 message.
S2F11(SecsFormat) - Constructor for class com.ergotech.secs.S2F11: The data is assumed to be correct format and is not checked.
S2F12 - Class in com.ergotech.secs: Service Program Directory Data.
S2F12() - Constructor for class com.ergotech.secs.S2F12: Creates an empty message.
S2F12(SecsFormat) - Constructor for class com.ergotech.secs.S2F12: The data is assumed to be correct format and is not checked.
S2F12(SPID) - Constructor for class com.ergotech.secs.S2F12: Creates this message from one SPID.
S2F12(SecsFormat00) - Constructor for class com.ergotech.secs.S2F12: Creates this message from a list of SPIDs.
S2F13(SecsMsg) - Method in class com.ergotech.secs.ECVoyeurHandler
S2F13(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S21F13 and sends an S2F14.
S2F13 - Class in com.ergotech.secs: Equipment Constant Request.
S2F13() - Constructor for class com.ergotech.secs.S2F13: Creates an empty message.
S2F13(SecsFormat) - Constructor for class com.ergotech.secs.S2F13: The data is assumed to be correct format and is not checked.
S2F13(ECID) - Constructor for class com.ergotech.secs.S2F13: Creates this message from one ECID.
S2F13(SecsFormat00) - Constructor for class com.ergotech.secs.S2F13: Creates this message from a list of ECIDs.
S2F14(SecsMsg) - Method in class com.ergotech.secs.ECControllerHandler: Captures the reply messages for the controller asking for the latest EC
S2F14 - Class in com.ergotech.secs: Equipment Constant Data.
S2F14() - Constructor for class com.ergotech.secs.S2F14: Creates an empty message.
S2F14(SecsFormat) - Constructor for class com.ergotech.secs.S2F14: The data is assumed to be correct format and is not checked.
S2F14(ECV) - Constructor for class com.ergotech.secs.S2F14: Creates this message from one ECV.
S2F14(SecsFormat00) - Constructor for class com.ergotech.secs.S2F14: Creates this message from a list of ECVs.
S2F15(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S21F15 and sends an S2F16.
S2F15 - Class in com.ergotech.secs: New Equipment Constant Send.
S2F15() - Constructor for class com.ergotech.secs.S2F15
S2F15(SecsFormat) - Constructor for class com.ergotech.secs.S2F15: The data is assumed to be correct format and is not checked.
S2F15(ECID, ECV) - Constructor for class com.ergotech.secs.S2F15: Creates a new S2F15 message taking the data from the passed parameters.
S2F15(SecsFormat00) - Constructor for class com.ergotech.secs.S2F15: Creates this message from a list (Format00) of constants containing an ECID and an ECV.
S2F16(SecsMsg) - Method in class com.ergotech.secs.ECControllerHandler: Captures the reply messages for the controller asking for the latest EC
S2F16 - Class in com.ergotech.secs: New Equipment Constant Acknowledge.
S2F16() - Constructor for class com.ergotech.secs.S2F16: Creates a new empty S2F16 message.
S2F16(EAC) - Constructor for class com.ergotech.secs.S2F16: Creates a new S2F16 message taking the data from the passed parameters.
S2F16(SecsFormat) - Constructor for class com.ergotech.secs.S2F16: The data is assumed to be correct format and is not checked.
S2F17(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method recieves an S2F17.
S2F17 - Class in com.ergotech.secs: Date And Time Request.
S2F17() - Constructor for class com.ergotech.secs.S2F17: Creates a new empty S2F17 message.
S2F17(SecsFormat) - Constructor for class com.ergotech.secs.S2F17: The data is assumed to be correct format and is not checked.
S2F18 - Class in com.ergotech.secs: Data And Time Data.
S2F18() - Constructor for class com.ergotech.secs.S2F18: Creates a new empty S2F18 message.
S2F18(TIME) - Constructor for class com.ergotech.secs.S2F18: Creates a new S2F18 message taking the data from the passed parameters.
S2F18(SecsFormat) - Constructor for class com.ergotech.secs.S2F18: The data is assumed to be correct format and is not checked.
S2F19 - Class in com.ergotech.secs: Reset/Initialize Send.
S2F19() - Constructor for class com.ergotech.secs.S2F19: Creates a new empty S2F19 message.
S2F19(SecsFormat) - Constructor for class com.ergotech.secs.S2F19: The data is assumed to be correct format and is not checked.
S2F19(RIC) - Constructor for class com.ergotech.secs.S2F19: Creates a new S2F19 message taking the data from the passed parameters.
S2F2 - Class in com.ergotech.secs: This message gives permission for a Service program to be loaded.
S2F2() - Constructor for class com.ergotech.secs.S2F2: Creates a new empty S2F2 message.
S2F2(SecsFormat) - Constructor for class com.ergotech.secs.S2F2: The data is assumed to be correct format and is not checked.
S2F2(GRANT) - Constructor for class com.ergotech.secs.S2F2: Creates a new S2F2 message taking the data from the passed parameters.
S2F20 - Class in com.ergotech.secs: Reset Acknowledge (RIA).
S2F20() - Constructor for class com.ergotech.secs.S2F20: Creates a new empty S2F20 message.
S2F20(SecsFormat) - Constructor for class com.ergotech.secs.S2F20: The data is assumed to be correct format and is not checked.
S2F20(RAC) - Constructor for class com.ergotech.secs.S2F20: Creates a new S2F20 message taking the data from the passed parameters.
S2F21 - Class in com.ergotech.secs: Remote Command Send.
S2F21() - Constructor for class com.ergotech.secs.S2F21: Creates a new empty S2F21 message.
S2F21(SecsFormat) - Constructor for class com.ergotech.secs.S2F21: Creates a new S2F21 message taking the data from the passed parameters.
S2F21(RCMD) - Constructor for class com.ergotech.secs.S2F21: Creates a new S2F21 message taking the data from the passed parameters.
S2F22 - Class in com.ergotech.secs: Remote Command Acknowledge (RCA).
S2F22() - Constructor for class com.ergotech.secs.S2F22: Creates a new empty S2F22 message.
S2F22(SecsFormat) - Constructor for class com.ergotech.secs.S2F22: Creates a new S2F22 message taking the data from the passed parameters.
S2F22(CMDA) - Constructor for class com.ergotech.secs.S2F22: Creates a new S2F22 message taking the data from the passed parameters.
S2F23(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method recieves an S2F23.
S2F23 - Class in com.ergotech.secs: Trace Initialize Send.
S2F23() - Constructor for class com.ergotech.secs.S2F23
S2F23(SecsFormat) - Constructor for class com.ergotech.secs.S2F23: The data is assumed to be correct format and is not checked.
S2F23(TRID, DSPER, TOTSMP, REPGSZ, SVID) - Constructor for class com.ergotech.secs.S2F23: Creates a new S2F23 message taking the data from the passed parameters.
S2F23(TRID, DSPER, TOTSMP, REPGSZ, SecsFormat00) - Constructor for class com.ergotech.secs.S2F23: Creates a new S2F23 message taking the data from the passed parameters.
S2F23(SecsFormat00) - Constructor for class com.ergotech.secs.S2F23: Creates this message from a list (Format00) of constants containing a TRID, DSPER, TOTSMP,REPGSZ and a list of SVIDs.
S2F24 - Class in com.ergotech.secs: Trace Initialize Acknowledge.
S2F24() - Constructor for class com.ergotech.secs.S2F24: Creates a new empty S2F24 message.
S2F24(SecsFormat) - Constructor for class com.ergotech.secs.S2F24: The data is assumed to be correct format and is not checked.
S2F24(TIAACK) - Constructor for class com.ergotech.secs.S2F24: Creates a new S2F24 message taking the data from the passed parameters.
S2F25 - Class in com.ergotech.secs: Loopback Disgnostic Request.
S2F25() - Constructor for class com.ergotech.secs.S2F25: Creates a new empty S2F25 message.
S2F25(SecsFormat) - Constructor for class com.ergotech.secs.S2F25: The data is assumed to be correct format and is not checked.
S2F25(ABS) - Constructor for class com.ergotech.secs.S2F25: Creates a new S2F25 message taking the data from the passed parameters.
S2F26 - Class in com.ergotech.secs: Loopback Disgnostic Data.
S2F26() - Constructor for class com.ergotech.secs.S2F26: Creates a new empty S2F26 message.
S2F26(SecsFormat) - Constructor for class com.ergotech.secs.S2F26: The data is assumed to be correct format and is not checked.
S2F26(ABS) - Constructor for class com.ergotech.secs.S2F26: Creates a new S2F26 message taking the data from the passed parameters.
S2F27 - Class in com.ergotech.secs: Initiate Processing Request.
S2F27() - Constructor for class com.ergotech.secs.S2F27
S2F27(SecsFormat) - Constructor for class com.ergotech.secs.S2F27: The data is assumed to be correct format and is not checked.
S2F27(LOC, PPID, MID) - Constructor for class com.ergotech.secs.S2F27: Creates a new S2F27 message taking the data from the passed parameters.
S2F27(LOC, PPID, SecsFormat00) - Constructor for class com.ergotech.secs.S2F27: Creates a new S2F27 message taking the data from the passed parameters.
S2F27(SecsFormat00) - Constructor for class com.ergotech.secs.S2F27: Creates this message from a list (Format00) of constants containing an LOC, PPID, and a list of MIDs.
S2F28 - Class in com.ergotech.secs: Initiate Processing Acknowldege.
S2F28() - Constructor for class com.ergotech.secs.S2F28: Creates a new empty S2F28 message.
S2F28(SecsFormat) - Constructor for class com.ergotech.secs.S2F28: The data is assumed to be correct format and is not checked.
S2F28(CMDA) - Constructor for class com.ergotech.secs.S2F28: Creates a new S2F28 message taking the data from the passed parameters.
S2F29(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S2F29 and sends an S2F30.
S2F29 - Class in com.ergotech.secs: Equipment Constant Namelist Request.
S2F29() - Constructor for class com.ergotech.secs.S2F29: Creates an empty message.
S2F29(SecsFormat) - Constructor for class com.ergotech.secs.S2F29: The data is assumed to be correct format and is not checked.
S2F29(ECID) - Constructor for class com.ergotech.secs.S2F29: Creates this message from one ECID.
S2F29(SecsFormat00) - Constructor for class com.ergotech.secs.S2F29: Creates this message from a list of ECIDs.
S2F3 - Class in com.ergotech.secs: This message transfers a Service program.
S2F3() - Constructor for class com.ergotech.secs.S2F3: Creates a new empty S2F3 message.
S2F3(SecsFormat) - Constructor for class com.ergotech.secs.S2F3: The data is assumed to be correct format and is not checked.
S2F3(SPD) - Constructor for class com.ergotech.secs.S2F3: Creates a new S2F3 message taking the data from the passed parameters.
S2F30 - Class in com.ergotech.secs: Equipment Constant Namelist.
S2F30() - Constructor for class com.ergotech.secs.S2F30
S2F30(SecsFormat) - Constructor for class com.ergotech.secs.S2F30: The data is assumed to be correct format and is not checked.
S2F30(ECID, ECNAME, ECMIN, ECMAX, ECDEF, UNITS) - Constructor for class com.ergotech.secs.S2F30: Creates a new S2F30 message taking the data from the passed parameters.
S2F30(SecsFormat00) - Constructor for class com.ergotech.secs.S2F30: Creates this message from a list (Format00) of constants containing an ECID, ECNAME, ECMIN, ECMAX, ECDEF, UNITS.
S2F31(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S2F31 and sends an S2F32.
S2F31 - Class in com.ergotech.secs: Date And Time Set Request.
S2F31() - Constructor for class com.ergotech.secs.S2F31: Creates a new empty S2F31 message.
S2F31(SecsFormat) - Constructor for class com.ergotech.secs.S2F31: The data is assumed to be correct format and is not checked.
S2F31(TIME) - Constructor for class com.ergotech.secs.S2F31: Creates a new S2F31 message taking the data from the passed parameters.
S2F32 - Class in com.ergotech.secs: Date And Time Set Acknowledge.
S2F32() - Constructor for class com.ergotech.secs.S2F32: Creates a new empty S2F32 message.
S2F32(SecsFormat) - Constructor for class com.ergotech.secs.S2F32: The data is assumed to be correct format and is not checked.
S2F32(TIACK) - Constructor for class com.ergotech.secs.S2F32: Creates a new S2F32 message taking the data from the passed parameters.
S2F33(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler
S2F33 - Class in com.ergotech.secs: Define Report.
S2F33() - Constructor for class com.ergotech.secs.S2F33
S2F33(SecsFormat) - Constructor for class com.ergotech.secs.S2F33: The data is assumed to be correct format and is not checked.
S2F33(SecsFormat00) - Constructor for class com.ergotech.secs.S2F33: Creates this message from a list (Format00) of constants containing an DATAID, then a list containing a list of RPTID and a list of VIDs
S2F34 - Class in com.ergotech.secs: On-Line Acknowledge.
S2F34() - Constructor for class com.ergotech.secs.S2F34: Required empty constructor.
S2F34(SecsFormat) - Constructor for class com.ergotech.secs.S2F34: Creates a new S2F34 message from a SecsFormat
S2F34(int) - Constructor for class com.ergotech.secs.S2F34: Creates this message from one int.
S2F34(DRACK) - Constructor for class com.ergotech.secs.S2F34: Creates this message from one DRACK.
S2F35(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S2F35 and sends an S2F36.
S2F35 - Class in com.ergotech.secs: Link Event Report (LER).
S2F35() - Constructor for class com.ergotech.secs.S2F35
S2F35(SecsFormat) - Constructor for class com.ergotech.secs.S2F35: The data is assumed to be correct format and is not checked.
S2F35(DATAID, CEID, RPTID) - Constructor for class com.ergotech.secs.S2F35: Creates a new S2F35 message taking the data from the passed parameters.
S2F35(DATAID, CEID, SecsFormat00) - Constructor for class com.ergotech.secs.S2F35: Creates a new S2F35 message taking the data from the passed parameters.
S2F35(SecsFormat00) - Constructor for class com.ergotech.secs.S2F35: Creates this message from a list (Format00) of constants containing an LOC, PPID, and a list of MIDs.
S2F36 - Class in com.ergotech.secs: Link Event Report Acknowledge.
S2F36() - Constructor for class com.ergotech.secs.S2F36: Required empty constructor.
S2F36(byte) - Constructor for class com.ergotech.secs.S2F36: Creates a new S2F36 message taking a boolean.
S2F36(SecsFormat) - Constructor for class com.ergotech.secs.S2F36: Creates a new S2F36 message from a SecsFormat
S2F36(LRACK) - Constructor for class com.ergotech.secs.S2F36: Creates a new S2F36 message taking the data from the passed parameters.
S2F37(SecsMsg) - Method in class com.ergotech.secs.ERVoyeurHandler: Enable/Disable Event Report (EDER) This will register this connection to get updated for the given CEID's
S2F37(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S2F37 and sends an S2F38.
S2F37 - Class in com.ergotech.secs: Enable/Disable Event Report.
S2F37() - Constructor for class com.ergotech.secs.S2F37: Required empty constructor.
S2F37(SecsFormat) - Constructor for class com.ergotech.secs.S2F37: The data is assumed to be correct format and is not checked.
S2F37(CEED, CEID) - Constructor for class com.ergotech.secs.S2F37: Creates a new S2F37 message taking the data from the passed parameters.
S2F37(CEED, SecsFormat00) - Constructor for class com.ergotech.secs.S2F37: Creates a new S2F37 message taking the data from the passed parameters.
S2F37(SecsFormat00) - Constructor for class com.ergotech.secs.S2F37: Creates this message from a list (Format00) of constants containing an CEED, and a list of CEIDs.
S2F38 - Class in com.ergotech.secs: Acknowledge or error.
S2F38() - Constructor for class com.ergotech.secs.S2F38: Required empty constructor.
S2F38(SecsFormat) - Constructor for class com.ergotech.secs.S2F38: Creates a new S2F38 message from a SecsFormat
S2F38(ERACK) - Constructor for class com.ergotech.secs.S2F38: Creates a new S2F38 message taking the data from the passed parameters.
S2F38(byte) - Constructor for class com.ergotech.secs.S2F38: Creates a new S2F38 message taking a boolean (true = 0, false = 1)
S2F39(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Stream 2 multi-block Request.
S2F39 - Class in com.ergotech.secs: If a S2F33, S2F35, S2F45, OR S2F49 message is more than one block, this transaction must procede the message.
S2F39() - Constructor for class com.ergotech.secs.S2F39: Required empty constructor.
S2F39(SecsFormat) - Constructor for class com.ergotech.secs.S2F39: The data is assumed to be correct format and is not checked.
S2F39(DATAID, DATALENGTH) - Constructor for class com.ergotech.secs.S2F39: Creates a new message taking the data from the passed parameters.
S2F39(SecsFormat00) - Constructor for class com.ergotech.secs.S2F39: Creates this message from a list.
S2F4 - Class in com.ergotech.secs: This message transfers a Service program.
S2F4() - Constructor for class com.ergotech.secs.S2F4: Creates a new empty S2F4 message.
S2F4(SecsFormat) - Constructor for class com.ergotech.secs.S2F4: The data is assumed to be correct format and is not checked.
S2F4(SPAACK) - Constructor for class com.ergotech.secs.S2F4: Creates a new S2F4 message taking the data from the passed parameters.
S2F40 - Class in com.ergotech.secs: Multi-block Grant.
S2F40() - Constructor for class com.ergotech.secs.S2F40: Required empty constructor.
S2F40(SecsFormat) - Constructor for class com.ergotech.secs.S2F40: The data is assumed to be correct format and is not checked.
S2F40(GRANT) - Constructor for class com.ergotech.secs.S2F40: Creates a new S2F40 message taking the data from the passed parameters.
S2F41 - Class in com.ergotech.secs: Host Command Send (HCS).
S2F41() - Constructor for class com.ergotech.secs.S2F41: Required empty constructor.
S2F41(SecsFormat) - Constructor for class com.ergotech.secs.S2F41: The data is assumed to be correct format and is not checked.
S2F41(RCMD, CPNAME, CPVAL) - Constructor for class com.ergotech.secs.S2F41: Creates a new S2F41 message taking the data from the passed parameters.
S2F41(RCMD, SecsFormat00) - Constructor for class com.ergotech.secs.S2F41: Creates a new S2F41 message taking the data from the passed parameters.
S2F41(SecsFormat00) - Constructor for class com.ergotech.secs.S2F41: Creates this message from a list (Format00) of constants containing an RCMD, CPNAME, and CPVAL.
S2F42 - Class in com.ergotech.secs: Host Command Acknowledge (HCA).
S2F42() - Constructor for class com.ergotech.secs.S2F42: Required empty constructor.
S2F42(SecsFormat) - Constructor for class com.ergotech.secs.S2F42: The data is assumed to be correct format and is not checked.
S2F42(HCACK, CPNAME, CPACK) - Constructor for class com.ergotech.secs.S2F42: Creates a new S2F41 message taking the data from the passed parameters.
S2F42(HCACK, CPNAME, SecsFormat00) - Constructor for class com.ergotech.secs.S2F42: Creates a new S2F42 message taking the data from the passed parameters.
S2F42(SecsFormat00) - Constructor for class com.ergotech.secs.S2F42: Creates this message from a list (Format00) of constants containing an RCMD, CPNAME, and CPVALUE.
S2F43(SecsMsg) - Method in class com.ergotech.secs.gem.GemSpoolHandler: This method receives an S2F43 and sends an S2F44.
S2F43 - Class in com.ergotech.secs: Reset Spooling Streams and Function (RSSF).
S2F43() - Constructor for class com.ergotech.secs.S2F43: Required empty constructor.
S2F43(SecsFormat) - Constructor for class com.ergotech.secs.S2F43: The data is assumed to be correct format and is not checked.
S2F43(STRID, FCNID) - Constructor for class com.ergotech.secs.S2F43: Creates a new S2F43 message taking the data from the passed parameters.
S2F43(STRID, SecsFormat00) - Constructor for class com.ergotech.secs.S2F43: Creates a new S2F43 message taking the data from the passed parameters.
S2F43(SecsFormat00) - Constructor for class com.ergotech.secs.S2F43: Creates this message from a list (Format00) of constants containing an STRID, FCNID.
S2F44 - Class in com.ergotech.secs: Reset Spooling Acknowledge (RSA).
S2F44() - Constructor for class com.ergotech.secs.S2F44: Required empty constructor.
S2F44(SecsFormat) - Constructor for class com.ergotech.secs.S2F44: The data is assumed to be correct format and is not checked.
S2F44(RSPACK, STRID, STRACK, FCNID) - Constructor for class com.ergotech.secs.S2F44: Creates a new S2F44 message taking the data from the passed parameters.
S2F44(RSPACK, STRID, STRACK, SecsFormat00) - Constructor for class com.ergotech.secs.S2F44: Creates a new S2F44 message taking the data from the passed parameters.
S2F44(SecsFormat00) - Constructor for class com.ergotech.secs.S2F44: Creates this message from a list (Format00) of constants containing an RSPACK, STRID, STRACK, and FCNID.
S2F45(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This will receive a S2F44 secs msg.
S2F45 - Class in com.ergotech.secs: Defined Variable Limit Attributes (DVLA).
S2F45() - Constructor for class com.ergotech.secs.S2F45: Required empty constructor.
S2F45(SecsFormat) - Constructor for class com.ergotech.secs.S2F45: The data is assumed to be correct format and is not checked.
S2F45(DATAID, VID, LIMITID, UPPERDB, LOWERDB) - Constructor for class com.ergotech.secs.S2F45: Creates a new S2F45 message taking the data from the passed parameters.
S2F45(SecsFormat00) - Constructor for class com.ergotech.secs.S2F45: Creates this message from a list (Format00) of constants containing an DATAID,VID,LIMITID,UPPERDB,LOWERDB.
S2F46 - Class in com.ergotech.secs: Variable Limit Attribute Acknowledge (VLAA).
S2F46() - Constructor for class com.ergotech.secs.S2F46: Required empty constructor.
S2F46(VLAACK, VID, LVACK, LIMITID, LIMITACK) - Constructor for class com.ergotech.secs.S2F46: Creates a new S2F46 message taking the data from the passed parameters.
S2F46(SecsFormat) - Constructor for class com.ergotech.secs.S2F46: The data is assumed to be correct format and is not checked.
S2F46(SecsFormat00) - Constructor for class com.ergotech.secs.S2F46: Creates this message from a list (Format00) of constants containing VLAACK, VID, LVACK, LIMITID, LIMITACK.
S2F47(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: This method receives an S2F47 and sends an S2F48.
S2F47 - Class in com.ergotech.secs: Variable Limit Attributes Request (VLAR).
S2F47() - Constructor for class com.ergotech.secs.S2F47: Required empty constructor.
S2F47(SecsFormat) - Constructor for class com.ergotech.secs.S2F47: The data is assumed to be correct format and is not checked.
S2F47(VID) - Constructor for class com.ergotech.secs.S2F47: Creates a new S2F47 message taking the data from the passed parameters.
S2F47(SecsFormat00) - Constructor for class com.ergotech.secs.S2F47: Creates this message from a list (Format00) of constants containing VIDs.
S2F48 - Class in com.ergotech.secs: Variable Limit Attributes Send (VLAS).
S2F48() - Constructor for class com.ergotech.secs.S2F48: Required empty constructor.
S2F48(SecsFormat) - Constructor for class com.ergotech.secs.S2F48: The data is assumed to be correct format and is not checked.
S2F48(VID, UNITS, LIMITMIN, LIMITMAX, LIMITID, UPPERDB, LOWERDB) - Constructor for class com.ergotech.secs.S2F48: Creates a new S2F48 message taking the data from the passed parameters.
S2F48(SecsFormat00) - Constructor for class com.ergotech.secs.S2F48: Creates this message from a list (Format00) of constants containing VID, UNITS, LIMITMIN, LIMITMAX, LIMITID, UPPERDB, LOWERDB
S2F49 - Class in com.ergotech.secs: Enhanced Remote Command ( ).
S2F49() - Constructor for class com.ergotech.secs.S2F49: Required empty constructor.
S2F49(SecsFormat) - Constructor for class com.ergotech.secs.S2F49: The data is assumed to be correct format and is not checked.
S2F49(DATAID, OBJSPEC, RCMD, CPNAME, CEPVAL) - Constructor for class com.ergotech.secs.S2F49: Creates a new S2F49 message taking the data from the passed parameters.
S2F49(SecsFormat00) - Constructor for class com.ergotech.secs.S2F49: Creates this message from a list (Format00) of constants containing DATAID, OBJSPEC, RCMD, CPNAME, CEPVAL
S2F5 - Class in com.ergotech.secs: This message transfers a Service program.
S2F5() - Constructor for class com.ergotech.secs.S2F5: Creates a new empty S2F5 message.
S2F5(SPID) - Constructor for class com.ergotech.secs.S2F5: Creates a new S2F5 message taking the data from the passed parameters.
S2F5(SecsFormat) - Constructor for class com.ergotech.secs.S2F5: The data is assumed to be correct format and is not checked.
S2F50 - Class in com.ergotech.secs: Enhanced Remote Command Acknowledge ( ).
S2F50() - Constructor for class com.ergotech.secs.S2F50: Required empty constructor.
S2F50(HCACK, CPNAME, CEPACK) - Constructor for class com.ergotech.secs.S2F50: Creates a new S2F50 message taking the data from the passed parameters.
S2F50(SecsFormat00) - Constructor for class com.ergotech.secs.S2F50: Creates this message from a list (Format00) of constants containing HCACK, CPNAME, CEPACK
S2F50(SecsFormat) - Constructor for class com.ergotech.secs.S2F50: The data is assumed to be correct format and is not checked.
S2F6 - Class in com.ergotech.secs: This message transfers a Service program.
S2F6() - Constructor for class com.ergotech.secs.S2F6: Creates a new empty S2F6 message.
S2F6(SecsFormat) - Constructor for class com.ergotech.secs.S2F6: The data is assumed to be correct format and is not checked.
S2F6(SPD) - Constructor for class com.ergotech.secs.S2F6: Creates a new S2F6 message taking the data from the passed parameters.
S2F7 - Class in com.ergotech.secs: This message transfers a Service program.
S2F7() - Constructor for class com.ergotech.secs.S2F7: Creates a new empty S2F7 message.
S2F7(SecsFormat) - Constructor for class com.ergotech.secs.S2F7: The data is assumed to be correct format and is not checked.
S2F7(SPID) - Constructor for class com.ergotech.secs.S2F7: Creates a new S2F7 message taking the data from the passed parameters.
S2F8 - Class in com.ergotech.secs: This message transfers a Service program.
S2F8() - Constructor for class com.ergotech.secs.S2F8: Creates a new empty S2F8 message.
S2F8(SecsFormat) - Constructor for class com.ergotech.secs.S2F8: The data is assumed to be correct format and is not checked.
S2F8(CSAACK) - Constructor for class com.ergotech.secs.S2F8: Creates a new S2F8 message taking the data from the passed parameters.
S2F9 - Class in com.ergotech.secs: This message transfers a Service program.
S2F9() - Constructor for class com.ergotech.secs.S2F9: Creates a new empty S2F9 message.
S2F9(SPID) - Constructor for class com.ergotech.secs.S2F9: Creates a new S2F9 message taking the data from the passed parameters.
S2F9(SecsFormat) - Constructor for class com.ergotech.secs.S2F9: The data is assumed to be correct format and is not checked.
S5F0 - Class in com.ergotech.secs: Abort Transaction.
S5F0() - Constructor for class com.ergotech.secs.S5F0: Required empty constructor.
S5F0(SecsFormat) - Constructor for class com.ergotech.secs.S5F0: Dummy SecsFormat constructor.
S5F1 - Class in com.ergotech.secs: Alarm Report Send (ARS).
S5F1() - Constructor for class com.ergotech.secs.S5F1: Required empty constructor.
S5F1(SecsFormat) - Constructor for class com.ergotech.secs.S5F1: The data is assumed to be correct format and is not checked.
S5F1(ALCD, ALID, ALTX) - Constructor for class com.ergotech.secs.S5F1: Creates this message from and ALCD,ALID, ALTX object.
S5F1(SecsFormat00) - Constructor for class com.ergotech.secs.S5F1: Creates this message from a SecsFormat.
S5F2 - Class in com.ergotech.secs: Alarm Report Acknowledge (ARA).
S5F2() - Constructor for class com.ergotech.secs.S5F2: Creates a new empty S5F2 message.
S5F2(ACKC5) - Constructor for class com.ergotech.secs.S5F2: Creates a new S5F2 message taking the data from the passed parameters.
S5F2(SecsFormat) - Constructor for class com.ergotech.secs.S5F2: Creates a new S5F2 message taking the data from the passed parameters.
S5F3(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Enable/Disable alarm send (EAS).
S5F3 - Class in com.ergotech.secs: Enable/Disable Alarm Send (EAS).
S5F3() - Constructor for class com.ergotech.secs.S5F3: Required empty constructor.
S5F3(SecsFormat) - Constructor for class com.ergotech.secs.S5F3: The data is assumed to be correct format and is not checked.
S5F3(ALED, ALID) - Constructor for class com.ergotech.secs.S5F3: Creates this message from and ALED, ALID object.
S5F3(SecsFormat00) - Constructor for class com.ergotech.secs.S5F3: Creates this message from a SecsFormat.
S5F4 - Class in com.ergotech.secs: Enable/Disable Alarm Acknowledge (EAA).
S5F4() - Constructor for class com.ergotech.secs.S5F4: Creates a new empty S5F4 message.
S5F4(ACKC5) - Constructor for class com.ergotech.secs.S5F4: Creates a new S5F4 message taking the data from the passed parameters.
S5F4(SecsFormat) - Constructor for class com.ergotech.secs.S5F4: The data is assumed to be correct format and is not checked.
S5F5(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: List alarm request.
S5F5 - Class in com.ergotech.secs: List Alarm Request (LAR).
S5F5() - Constructor for class com.ergotech.secs.S5F5: Required empty constructor.
S5F5(SecsFormat) - Constructor for class com.ergotech.secs.S5F5: The data is assumed to be correct format and is not checked.
S5F5(ALID) - Constructor for class com.ergotech.secs.S5F5: Creates this message from and ALED, ALID object.
S5F5(SecsFormat00) - Constructor for class com.ergotech.secs.S5F5: Creates this message from a SecsFormat.
S5F6 - Class in com.ergotech.secs: List Alarm Data (LAD).
S5F6() - Constructor for class com.ergotech.secs.S5F6: Required empty constructor.
S5F6(SecsFormat) - Constructor for class com.ergotech.secs.S5F6: The data is assumed to be correct format and is not checked.
S5F6(ALCD, ALID, ALTX) - Constructor for class com.ergotech.secs.S5F6: Creates this message from and ALCD, ALID, ALTX object.
S5F6(SecsFormat00) - Constructor for class com.ergotech.secs.S5F6: Creates this message from a SecsFormat.
S5F7(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: List Enabled Alarm Request.
S5F7 - Class in com.ergotech.secs: List alarms which are enabled (LEAR).
S5F7() - Constructor for class com.ergotech.secs.S5F7: Required empty constructor.
S5F7(SecsFormat) - Constructor for class com.ergotech.secs.S5F7: Dummy SecsFormat constructor.
S5F8 - Class in com.ergotech.secs: List Enable Alarm Data (LEAD).
S5F8() - Constructor for class com.ergotech.secs.S5F8: Required empty constructor.
S5F8(ALCD, ALID, ALTX) - Constructor for class com.ergotech.secs.S5F8: Creates this message from and ALCD, ALID, ALTX object.
S5F8(SecsFormat00) - Constructor for class com.ergotech.secs.S5F8: Creates this message from a SecsFormat.
S5F8(SecsFormat) - Constructor for class com.ergotech.secs.S5F8: The data is assumed to be correct format and is not checked.
S6F0 - Class in com.ergotech.secs: Abort Transaction.
S6F0() - Constructor for class com.ergotech.secs.S6F0: Required empty constructor.
S6F0(SecsFormat) - Constructor for class com.ergotech.secs.S6F0: Dummy SecsFormat constructor.
S6F1 - Class in com.ergotech.secs: Trace Data Send(TDS).
S6F1() - Constructor for class com.ergotech.secs.S6F1: Required empty constructor.
S6F1(SecsFormat) - Constructor for class com.ergotech.secs.S6F1: The data is assumed to be correct format and is not checked.
S6F1(TRID, SMPLN, STIME, SV) - Constructor for class com.ergotech.secs.S6F1: Creates a new S6F1 message taking the data from the passed parameters.
S6F1(SecsFormat00) - Constructor for class com.ergotech.secs.S6F1: Creates this message from a list (Format00) of constants containing an TRID, SMPLN,STIME, and a list of SVs.
S6F10 - Class in com.ergotech.secs: Formatted Variable Acknowledge (FVA).
S6F10() - Constructor for class com.ergotech.secs.S6F10: Required empty constructor.
S6F10(SecsFormat) - Constructor for class com.ergotech.secs.S6F10: The data is assumed to be correct format and is not checked.
S6F10(ACKC6) - Constructor for class com.ergotech.secs.S6F10: Creates this message from one ACKC6.
S6F11(SecsMsg) - Method in class com.ergotech.secs.ERControllerHandler: Captures the reply messages for the controller asking for the latest EC
S6F11 - Class in com.ergotech.secs: Event Report Send (ERS).
S6F11() - Constructor for class com.ergotech.secs.S6F11: Required empty constructor.
S6F11(SecsFormat00) - Constructor for class com.ergotech.secs.S6F11: Creates this message from one SecsFormat00.
S6F11(SecsFormat) - Constructor for class com.ergotech.secs.S6F11: The data is assumed to be correct format and is not checked.
S6F11(DATAID, CEID, RPTID, V) - Constructor for class com.ergotech.secs.S6F11: Creates a new S6F25 message taking the data from the passed parameters.
S6F12 - Class in com.ergotech.secs: Equipment Report Acknowledge.
S6F12() - Constructor for class com.ergotech.secs.S6F12: Required empty constructor.
S6F12(SecsFormat) - Constructor for class com.ergotech.secs.S6F12: create the opbject form a secsofrmat
S6F12(byte) - Constructor for class com.ergotech.secs.S6F12
S6F12(ACKC6) - Constructor for class com.ergotech.secs.S6F12: Creates this message from one ACKC6.
S6F13 - Class in com.ergotech.secs: Annotated Event Report Send (AERS).
S6F13() - Constructor for class com.ergotech.secs.S6F13: Required empty constructor.
S6F13(SecsFormat00) - Constructor for class com.ergotech.secs.S6F13: Creates this message from one SecsFormat00.
S6F13(SecsFormat) - Constructor for class com.ergotech.secs.S6F13: The data is assumed to be correct format and is not checked.
S6F13(DATAID, CEID, RPTID, VID, V) - Constructor for class com.ergotech.secs.S6F13: Creates a new S6F13 message taking the data from the passed parameters.
S6F14 - Class in com.ergotech.secs: Annotated Event Report Acknowledge (AERA).
S6F14() - Constructor for class com.ergotech.secs.S6F14: Required empty constructor.
S6F14(SecsFormat) - Constructor for class com.ergotech.secs.S6F14: The data is assumed to be correct format and is not checked.
S6F14(byte) - Constructor for class com.ergotech.secs.S6F14: Creates this message from one ACKC6.
S6F14(ACKC6) - Constructor for class com.ergotech.secs.S6F14: Creates this message from one ACKC6.
S6F15(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Respond to the S6F15 message.
S6F15 - Class in com.ergotech.secs: Event Report Request (ERR).
S6F15() - Constructor for class com.ergotech.secs.S6F15: Required empty constructor.
S6F15(SecsFormat) - Constructor for class com.ergotech.secs.S6F15: The data is assumed to be correct format and is not checked.
S6F15(byte) - Constructor for class com.ergotech.secs.S6F15: Creates this message from one CEID.
S6F15(CEID) - Constructor for class com.ergotech.secs.S6F15: Creates this message from one CEID.
S6F16 - Class in com.ergotech.secs: Event Report Data (ERD).
S6F16() - Constructor for class com.ergotech.secs.S6F16: Required empty constructor.
S6F16(DATAID, CEID, RPTID, V) - Constructor for class com.ergotech.secs.S6F16
S6F16(SecsFormat) - Constructor for class com.ergotech.secs.S6F16: The data is assumed to be correct format and is not checked.
S6F16(SecsFormat00) - Constructor for class com.ergotech.secs.S6F16: Creates this message from one SecsFormat00.
S6F17(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Respond to the S6F17 message.
S6F17 - Class in com.ergotech.secs: Annotated Event Report Request (AERR).
S6F17() - Constructor for class com.ergotech.secs.S6F17: Required empty constructor.
S6F17(SecsFormat) - Constructor for class com.ergotech.secs.S6F17: The data is assumed to be correct format and is not checked.
S6F17(byte) - Constructor for class com.ergotech.secs.S6F17: Creates this message from one CEID.
S6F17(CEID) - Constructor for class com.ergotech.secs.S6F17: Creates this message from one CEID.
S6F18 - Class in com.ergotech.secs: Annotated Event Report Data (AERD).
S6F18() - Constructor for class com.ergotech.secs.S6F18: Required empty constructor.
S6F18(SecsFormat00) - Constructor for class com.ergotech.secs.S6F18: Creates this message from one SecsFormat00.
S6F18(SecsFormat) - Constructor for class com.ergotech.secs.S6F18: The data is assumed to be correct format and is not checked.
S6F18(DATAID, CEID, RPTID, VID, V) - Constructor for class com.ergotech.secs.S6F18: Creates a new S6F13 message taking the data from the passed parameters.
S6F19(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: S6F19 - Report Request.
S6F19 - Class in com.ergotech.secs: Individual Report Request (IRR).
S6F19() - Constructor for class com.ergotech.secs.S6F19: Required empty constructor.
S6F19(SecsFormat) - Constructor for class com.ergotech.secs.S6F19: The data is assumed to be correct format and is not checked.
S6F19(RPTID) - Constructor for class com.ergotech.secs.S6F19: Creates this message from one RPTID.
S6F2 - Class in com.ergotech.secs: Trace Data Acknowledge.
S6F2() - Constructor for class com.ergotech.secs.S6F2: Required empty constructor.
S6F2(SecsFormat) - Constructor for class com.ergotech.secs.S6F2: The data is assumed to be correct format and is not checked.
S6F2(ACKC6) - Constructor for class com.ergotech.secs.S6F2: Creates this message from one ACKC6.
S6F20 - Class in com.ergotech.secs: Individual Report Data (IRD).
S6F20() - Constructor for class com.ergotech.secs.S6F20: Required empty constructor.
S6F20(SecsFormat) - Constructor for class com.ergotech.secs.S6F20: The data is assumed to be correct format and is not checked.
S6F20(V) - Constructor for class com.ergotech.secs.S6F20: Creates this message from one V.
S6F20(SecsFormat00) - Constructor for class com.ergotech.secs.S6F20: Creates this message from a list of Vs.
S6F21(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: S6F21 - Annotated Report Request.
S6F21 - Class in com.ergotech.secs: Annotated Individual Report Request (AIRR).
S6F21() - Constructor for class com.ergotech.secs.S6F21: Required empty constructor.
S6F21(SecsFormat) - Constructor for class com.ergotech.secs.S6F21: The data is assumed to be correct format and is not checked.
S6F21(byte) - Constructor for class com.ergotech.secs.S6F21: Creates this message from one RPTID.
S6F21(RPTID) - Constructor for class com.ergotech.secs.S6F21: Creates this message from one RPTID.
S6F22 - Class in com.ergotech.secs: Annotated Individual Report Data (AIRD).
S6F22() - Constructor for class com.ergotech.secs.S6F22: Required empty constructor.
S6F22(SecsFormat) - Constructor for class com.ergotech.secs.S6F22: The data is assumed to be correct format and is not checked.
S6F22(SecsFormat00) - Constructor for class com.ergotech.secs.S6F22: Creates this message from one SecsFormat00.
S6F22(VID, V) - Constructor for class com.ergotech.secs.S6F22
S6F23(SecsMsg) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Process the S6F23 message.
S6F23 - Class in com.ergotech.secs: Request Spooled Data (RSD).
S6F23() - Constructor for class com.ergotech.secs.S6F23: Required empty constructor.
S6F23(SecsFormat) - Constructor for class com.ergotech.secs.S6F23: The data is assumed to be correct format and is not checked.
S6F23(byte) - Constructor for class com.ergotech.secs.S6F23: Creates this message from one RSDC.
S6F23(RSDC) - Constructor for class com.ergotech.secs.S6F23: Creates this message from one RSDC.
S6F24 - Class in com.ergotech.secs: Request Spooled Data Acknowledgement Send(RSDAS).
S6F24() - Constructor for class com.ergotech.secs.S6F24: Required empty constructor.
S6F24(SecsFormat) - Constructor for class com.ergotech.secs.S6F24: The data is assumed to be correct format and is not checked.
S6F24(byte) - Constructor for class com.ergotech.secs.S6F24: Creates this message from one RSDA.
S6F24(RSDA) - Constructor for class com.ergotech.secs.S6F24: Creates this message from one RSDA.
S6F25 - Class in com.ergotech.secs: Notification Report Send ( ).
S6F25() - Constructor for class com.ergotech.secs.S6F25: Required empty constructor.
S6F25(SecsFormat) - Constructor for class com.ergotech.secs.S6F25: The data is assumed to be correct format and is not checked.
S6F25(DATAID, OPID, LINKID, RCPSPEC, RMCHGSTAT, RCPATTRID, RCPATTRDATA, RMACK, ERRCODE, ERRTEXT) - Constructor for class com.ergotech.secs.S6F25: Creates a new S6F25 message taking the data from the passed parameters.
S6F25(SecsFormat00) - Constructor for class com.ergotech.secs.S6F25: Creates this message from a list (Format00) of constants containing DATAID, OPID, LINKID, RCPSPEC, RMCHGSTAT, RCPATTRID, RCPATTRDATA, RMACK,ERRCODE, ERRTEXT .
S6F26 - Class in com.ergotech.secs: Notification Report Send Acknowledge ( ).
S6F26() - Constructor for class com.ergotech.secs.S6F26: Required empty constructor.
S6F26(SecsFormat) - Constructor for class com.ergotech.secs.S6F26: The data is assumed to be correct format and is not checked.
S6F26(byte) - Constructor for class com.ergotech.secs.S6F26: Creates this message from one ACKC6.
S6F26(ACKC6) - Constructor for class com.ergotech.secs.S6F26: Creates this message from one ACKC6.
S6F27 - Class in com.ergotech.secs: Trace Report Send (TRS).
S6F27() - Constructor for class com.ergotech.secs.S6F27: Required empty constructor.
S6F27(SecsFormat) - Constructor for class com.ergotech.secs.S6F27: The data is assumed to be correct format and is not checked.
S6F27(DATAID, TRID, RPTID, V) - Constructor for class com.ergotech.secs.S6F27: Creates a new S6F25 message taking the data from the passed parameters.
S6F27(SecsFormat00) - Constructor for class com.ergotech.secs.S6F27: Creates this message from a list (Format00) of constants containing DATAID, TRID, RPTID, V.
S6F28 - Class in com.ergotech.secs: Trace Report Send Acknowledge ( ).
S6F28() - Constructor for class com.ergotech.secs.S6F28: Required empty constructor.
S6F28(SecsFormat) - Constructor for class com.ergotech.secs.S6F28: The data is assumed to be correct format and is not checked.
S6F28(byte) - Constructor for class com.ergotech.secs.S6F28: Creates this message from one TRID.
S6F28(TRID) - Constructor for class com.ergotech.secs.S6F28: Creates this message from one TRID.
S6F29 - Class in com.ergotech.secs: Trace Report Request (TRR).
S6F29() - Constructor for class com.ergotech.secs.S6F29: Required empty constructor.
S6F29(SecsFormat) - Constructor for class com.ergotech.secs.S6F29: The data is assumed to be correct format and is not checked.
S6F29(byte) - Constructor for class com.ergotech.secs.S6F29: Creates this message from one TRID.
S6F29(TRID) - Constructor for class com.ergotech.secs.S6F29: Creates this message from one TRID.
S6F3 - Class in com.ergotech.secs: Discrete Variable Data Send(DVS).
S6F3() - Constructor for class com.ergotech.secs.S6F3: Required empty constructor.
S6F3(DATAID, CEID, DSID, DVNAME, DVVAL) - Constructor for class com.ergotech.secs.S6F3: Creates a new S6F3 message taking the data from the passed parameters.
S6F3(SecsFormat) - Constructor for class com.ergotech.secs.S6F3: The data is assumed to be correct format and is not checked.
S6F3(SecsFormat00) - Constructor for class com.ergotech.secs.S6F3: Creates this message from a list (Format00) of constants containing DATAID, CEID, DSID, DVNAME, DVVAL.
S6F30 - Class in com.ergotech.secs: Trace Report Data (TRD).
S6F30() - Constructor for class com.ergotech.secs.S6F30: Required empty constructor.
S6F30(TRID, RPTID, V, ERRCODE) - Constructor for class com.ergotech.secs.S6F30: Creates a new S6F30 message taking the data from the passed parameters.
S6F30(SecsFormat00) - Constructor for class com.ergotech.secs.S6F30: Creates this message from a list (Format00) of constants containing TRID, RPTID, V, ERRCODE.
S6F30(SecsFormat) - Constructor for class com.ergotech.secs.S6F30: The data is assumed to be correct format and is not checked.
S6F4 - Class in com.ergotech.secs: Discrete Variable Data Acknowledge (DVA).
S6F4() - Constructor for class com.ergotech.secs.S6F4: Required empty constructor.
S6F4(ACKC6) - Constructor for class com.ergotech.secs.S6F4: Creates this message from one ACKC6.
S6F4(SecsFormat) - Constructor for class com.ergotech.secs.S6F4: The data is assumed to be correct format and is not checked.
S6F5(SecsMsg) - Method in class com.ergotech.secs.gem.GemHandler: Stream 6 multi-block Request.
S6F5 - Class in com.ergotech.secs: Multi-block Data Send Inquire(MBI).
S6F5() - Constructor for class com.ergotech.secs.S6F5: Required empty constructor.
S6F5(SecsFormat) - Constructor for class com.ergotech.secs.S6F5: The data is assumed to be correct format and is not checked.
S6F5(DATAID, DATALENGTH) - Constructor for class com.ergotech.secs.S6F5: Creates a new S6F5 message taking the data from the passed parameters.
S6F5(SecsFormat00) - Constructor for class com.ergotech.secs.S6F5: Creates this message from a list (Format00) of constants containing DATAID, DATALENGTH.
S6F6 - Class in com.ergotech.secs: Multi-block Grant (MBG).
S6F6() - Constructor for class com.ergotech.secs.S6F6: Required empty constructor.
S6F6(SecsFormat) - Constructor for class com.ergotech.secs.S6F6: The data is assumed to be correct format and is not checked.
S6F6(GRANT6) - Constructor for class com.ergotech.secs.S6F6: Creates this message from one GRANT6.
S6F7 - Class in com.ergotech.secs: Data Transfer Request (DDR).
S6F7() - Constructor for class com.ergotech.secs.S6F7: Required empty constructor.
S6F7(SecsFormat) - Constructor for class com.ergotech.secs.S6F7: The data is assumed to be correct format and is not checked.
S6F7(DATAID) - Constructor for class com.ergotech.secs.S6F7: Creates this message from one DATAID.
S6F8 - Class in com.ergotech.secs: Data Transfer Data(DDD).
S6F8() - Constructor for class com.ergotech.secs.S6F8: Required empty constructor.
S6F8(DATAID, CEID, DSID, DVNAME, DVVAL) - Constructor for class com.ergotech.secs.S6F8: Creates a new S6F3 message taking the data from the passed parameters.
S6F8(SecsFormat) - Constructor for class com.ergotech.secs.S6F8: The data is assumed to be correct format and is not checked.
S6F8(SecsFormat00) - Constructor for class com.ergotech.secs.S6F8: Creates this message from a list (Format00) of constants containing DATAID, CEID, DSID, DVNAME, DVVAL.
S6F9 - Class in com.ergotech.secs: Formatted variable Send (FVS).
S6F9() - Constructor for class com.ergotech.secs.S6F9: Required empty constructor.
S6F9(SecsFormat00) - Constructor for class com.ergotech.secs.S6F9: Creates this message from a list (Format00) of constants containing PFCD, DATAID, CEID, DSID, DVVAL.
S6F9(SecsFormat) - Constructor for class com.ergotech.secs.S6F9: The data is assumed to be correct format and is not checked.
S6F99 - Class in com.ergotech.secs: Bad Function Number ( ).
S6F99() - Constructor for class com.ergotech.secs.S6F99: Required empty constructor.
S6F99(SecsFormat) - Constructor for class com.ergotech.secs.S6F99: The data is assumed to be correct format and is not checked.
S6F99(MHEAD) - Constructor for class com.ergotech.secs.S6F99: Creates this message from one MHEAD.
S7 - Class in com.ergotech.vib.servers.ppi: This is part of the implementation of the PPI protocol.
S7() - Constructor for class com.ergotech.vib.servers.ppi.S7: Default constructor.
S7Array - Class in com.ergotech.vib.servers.ppi
S7Array() - Constructor for class com.ergotech.vib.servers.ppi.S7Array: Create the S7 Servers.
S7F0 - Class in com.ergotech.secs: Abort Transaction.
S7F0() - Constructor for class com.ergotech.secs.S7F0: Required empty constructor.
S7F0(SecsFormat) - Constructor for class com.ergotech.secs.S7F0: Dummy SecsFormat constructor.
S7F1 - Class in com.ergotech.secs: This message is used to initiate the transfer of a process program or to select from stored programs.
S7F1() - Constructor for class com.ergotech.secs.S7F1
S7F1(SecsFormat) - Constructor for class com.ergotech.secs.S7F1: The data is assumed to be correct format and is not checked.
S7F1(PPID, LENGTH) - Constructor for class com.ergotech.secs.S7F1: Creates a new S7F1 message taking the data from the passed parameters.
S7F1(SecsFormat00) - Constructor for class com.ergotech.secs.S7F1: Creates this message from a SecsFormat00.
S7F10 - Class in com.ergotech.secs: M/P M Data (MMD).
S7F10() - Constructor for class com.ergotech.secs.S7F10: Required empty constructor.
S7F10(SecsFormat) - Constructor for class com.ergotech.secs.S7F10: The data is assumed to be correct format and is not checked.
S7F10(SecsFormat00) - Constructor for class com.ergotech.secs.S7F10: Creates this message from one SecsFormat00.
S7F10(PPID, MID) - Constructor for class com.ergotech.secs.S7F10: Creates a new S7F10 message taking the data from the passed parameters.
S7F11 - Class in com.ergotech.secs: M/P M Update Send (UMS).
S7F11() - Constructor for class com.ergotech.secs.S7F11: Required empty constructor.
S7F11(SecsFormat00) - Constructor for class com.ergotech.secs.S7F11: Creates this message from one SecsFormat00.
S7F11(SecsFormat) - Constructor for class com.ergotech.secs.S7F11: The data is assumed to be correct format and is not checked.
S7F11(PPID, MID) - Constructor for class com.ergotech.secs.S7F11: Creates a new S7F11 message taking the data from the passed parameters.
S7F12 - Class in com.ergotech.secs: This message is used to acknowledge or error.
S7F12() - Constructor for class com.ergotech.secs.S7F12: Creates a new empty S7F12 message.
S7F12(SecsFormat) - Constructor for class com.ergotech.secs.S7F12: The data is assumed to be correct format and is not checked.
S7F12(ACKC7) - Constructor for class com.ergotech.secs.S7F12: Creates a new S7F12 message taking the data from the passed parameters.
S7F13 - Class in com.ergotech.secs: Delete M/P M Entry Send (DES).
S7F13() - Constructor for class com.ergotech.secs.S7F13: Required empty constructor.
S7F13(SecsFormat00) - Constructor for class com.ergotech.secs.S7F13: Creates this message from one SecsFormat00.
S7F13(PPID, MID) - Constructor for class com.ergotech.secs.S7F13: Creates a new S7F13 message taking the data from the passed parameters.
S7F13(SecsFormat) - Constructor for class com.ergotech.secs.S7F13: The data is assumed to be correct format and is not checked.
S7F14 - Class in com.ergotech.secs: This message is used to acknowledge or error.
S7F14() - Constructor for class com.ergotech.secs.S7F14: Creates a new empty S7F14 message.
S7F14(SecsFormat) - Constructor for class com.ergotech.secs.S7F14: The data is assumed to be correct format and is not checked.
S7F14(ACKC7) - Constructor for class com.ergotech.secs.S7F14: Creates a new S7F14 message taking the data from the passed parameters.
S7F15 - Class in com.ergotech.secs: This message is used by the host to chsnge the method of process program.
S7F15() - Constructor for class com.ergotech.secs.S7F15: Creates a new empty S7F15 message.
S7F15(SecsFormat) - Constructor for class com.ergotech.secs.S7F15: The data is assumed to be correct format and is not checked.
S7F15(MMODE) - Constructor for class com.ergotech.secs.S7F15: Creates a new S7F15 message taking the data from the passed parameters.
S7F16 - Class in com.ergotech.secs: This message is used to acknowledge or error.
S7F16() - Constructor for class com.ergotech.secs.S7F16: Creates a new empty S7F16 message.
S7F16(SecsFormat) - Constructor for class com.ergotech.secs.S7F16: The data is assumed to be correct format and is not checked.
S7F16(ACKC7) - Constructor for class com.ergotech.secs.S7F16: Creates a new S7F16 message taking the data from the passed parameters.
S7F17 - Class in com.ergotech.secs: Delete Process Program Send (DPS).
S7F17() - Constructor for class com.ergotech.secs.S7F17: Creates an empty message.
S7F17(SecsFormat) - Constructor for class com.ergotech.secs.S7F17: The data is assumed to be correct format and is not checked.
S7F17(PPID) - Constructor for class com.ergotech.secs.S7F17: Creates this message from one PPID.
S7F17(SecsFormat00) - Constructor for class com.ergotech.secs.S7F17: Creates this message from a list of ECIDs.
S7F18 - Class in com.ergotech.secs: This message is used to acknowledge or error.
S7F18() - Constructor for class com.ergotech.secs.S7F18: Creates a new empty S7F18 message.
S7F18(SecsFormat) - Constructor for class com.ergotech.secs.S7F18: The data is assumed to be correct format and is not checked.
S7F18(ACKC7) - Constructor for class com.ergotech.secs.S7F18: Creates a new S7F18 message taking the data from the passed parameters.
S7F19 - Class in com.ergotech.secs: Current EPPD Request (RER).
S7F19() - Constructor for class com.ergotech.secs.S7F19: Creates a new empty S7F19 message.
S7F19(SecsFormat) - Constructor for class com.ergotech.secs.S7F19: Dummy SecsFormat constructor.
S7F2 - Class in com.ergotech.secs: This message gives permission for a process program to be loaded.
S7F2() - Constructor for class com.ergotech.secs.S7F2: Creates a new empty S7F2 message.
S7F2(PPGNT) - Constructor for class com.ergotech.secs.S7F2: Creates a new S7F2 message taking the data from the passed parameters.
S7F2(SecsFormat) - Constructor for class com.ergotech.secs.S7F2: The data is assumed to be correct format and is not checked.
S7F20 - Class in com.ergotech.secs: Current EPPD Data (RED).
S7F20() - Constructor for class com.ergotech.secs.S7F20: Creates an empty message.
S7F20(SecsFormat) - Constructor for class com.ergotech.secs.S7F20: The data is assumed to be correct format and is not checked.
S7F20(PPID) - Constructor for class com.ergotech.secs.S7F20: Creates this message from one PPID.
S7F20(SecsFormat00) - Constructor for class com.ergotech.secs.S7F20: Creates this message from a list of ECIDs.
S7F3 - Class in com.ergotech.secs: This message is used to send a process program.
S7F3() - Constructor for class com.ergotech.secs.S7F3: Creates a new empty S7F3 message.
S7F3(PPID, PPBODY) - Constructor for class com.ergotech.secs.S7F3: Creates a new S7F3 messa ge taking the data from the passed parameters.
S7F3(SecsFormat) - Constructor for class com.ergotech.secs.S7F3: The data is assumed to be correct format and is not checked.
S7F3(SecsFormat00) - Constructor for class com.ergotech.secs.S7F3: Creates this message from a SecsFormat00.
S7F4 - Class in com.ergotech.secs: This message is used to acknowledge a process program.
S7F4() - Constructor for class com.ergotech.secs.S7F4: Creates a new empty S7F4 message.
S7F4(SecsFormat) - Constructor for class com.ergotech.secs.S7F4: Creates a new S7F4 message taking the data from the passed parameters.
S7F4(ACKC7) - Constructor for class com.ergotech.secs.S7F4: Creates a new S7F4 message taking the data from the passed parameters.
S7F5 - Class in com.ergotech.secs: This message is used to Request a process program.
S7F5() - Constructor for class com.ergotech.secs.S7F5: Creates a new empty S7F5 message.
S7F5(SecsFormat) - Constructor for class com.ergotech.secs.S7F5: Creates a new S7F5 message taking the data from the passed parameters.
S7F5(PPID) - Constructor for class com.ergotech.secs.S7F5: Creates a new S7F5 message taking the data from the passed parameters.
S7F6 - Class in com.ergotech.secs: This message is used to Data a process program.
S7F6() - Constructor for class com.ergotech.secs.S7F6: Creates a new empty S7F6 message.
S7F6(SecsFormat) - Constructor for class com.ergotech.secs.S7F6: The data is assumed to be correct format and is not checked.
S7F6(PPID, PPBODY) - Constructor for class com.ergotech.secs.S7F6: Creates a new S7F6 message taking the data from the passed parameters.
S7F6(SecsFormat00) - Constructor for class com.ergotech.secs.S7F6: Creates this message from a SecsFormat00.
S7F7 - Class in com.ergotech.secs: This message is used to request the PPID for use on the material identified.
S7F7() - Constructor for class com.ergotech.secs.S7F7: Creates a new empty S7F7 message.
S7F7(SecsFormat) - Constructor for class com.ergotech.secs.S7F7: The data is assumed to be correct format and is not checked.
S7F7(MID) - Constructor for class com.ergotech.secs.S7F7: Creates a new S7F7 message taking the data from the passed parameters.
S7F8 - Class in com.ergotech.secs: This message is used to transmit a single matrix entry in response to F7 The format of this message is a list containing a PPID and a MID of the message to be sent.
S7F8() - Constructor for class com.ergotech.secs.S7F8: Creates a new empty S7F8 message.
S7F8(SecsFormat) - Constructor for class com.ergotech.secs.S7F8: The data is assumed to be correct format and is not checked.
S7F8(PPID, MID) - Constructor for class com.ergotech.secs.S7F8: Creates a new S7F8 message taking the data from the passed parameters.
S7F8(SecsFormat00) - Constructor for class com.ergotech.secs.S7F8: Creates this message from a SecsFormat00.
S7F9 - Class in com.ergotech.secs: M/P M Request.
S7F9() - Constructor for class com.ergotech.secs.S7F9: Required empty constructor.
S7F9(SecsFormat) - Constructor for class com.ergotech.secs.S7F9: Dummy SecsFormat constructor.
S99F3 - Class in com.ergotech.secs: Unrecognized Stream Type (USN).
S99F3() - Constructor for class com.ergotech.secs.S99F3: Required empty constructor.
S99F3(SecsFormat) - Constructor for class com.ergotech.secs.S99F3: The data is assumed to be correct format and is not checked.
S99F3(MHEAD) - Constructor for class com.ergotech.secs.S99F3: Creates this message from one MHEAD.
S9_ERROR - Static variable in class com.ergotech.secs.SecsMsg: Indicates that the transaction completed with a Stream 9 message.
S9_ERROR - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: Indicates that the transaction completed with a Stream 9 message.
S9F0 - Class in com.ergotech.secs: Abort Transaction.
S9F0() - Constructor for class com.ergotech.secs.S9F0: Required empty constructor.
S9F0(SecsFormat) - Constructor for class com.ergotech.secs.S9F0: Dummy SecsFormat constructor.
S9F1 - Class in com.ergotech.secs: Unrecognized Device ID (UDN).
S9F1() - Constructor for class com.ergotech.secs.S9F1: Required empty constructor.
S9F1(SecsFormat) - Constructor for class com.ergotech.secs.S9F1: The data is assumed to be correct format and is not checked.
S9F1(MHEAD) - Constructor for class com.ergotech.secs.S9F1: Creates this message from one MHEAD.
S9F1(SecsMsg) - Constructor for class com.ergotech.secs.S9F1: Creates this message from the message that caused the error.
S9F11 - Class in com.ergotech.secs: Data Too Long (DLN).
S9F11() - Constructor for class com.ergotech.secs.S9F11: Required empty constructor.
S9F11(SecsFormat) - Constructor for class com.ergotech.secs.S9F11: The data is assumed to be correct format and is not checked.
S9F11(MHEAD) - Constructor for class com.ergotech.secs.S9F11: Creates this message from one MHEAD.
S9F11(SecsMsg) - Constructor for class com.ergotech.secs.S9F11: Creates this message from the message that caused the error.
S9F13 - Class in com.ergotech.secs: Conversation Timeout(CTN).
S9F13() - Constructor for class com.ergotech.secs.S9F13: Required empty constructor.
S9F13(SecsFormat) - Constructor for class com.ergotech.secs.S9F13: The data is assumed to be correct format and is not checked.
S9F13(MEXP, EDID) - Constructor for class com.ergotech.secs.S9F13: Creates this message from and MEXP and a EDID object.
S9F13(SecsFormat00) - Constructor for class com.ergotech.secs.S9F13: Creates this message from a SecsFormat.
S9F3 - Class in com.ergotech.secs: Unrecognized Stream Type (USN).
S9F3() - Constructor for class com.ergotech.secs.S9F3: Required empty constructor.
S9F3(SecsFormat) - Constructor for class com.ergotech.secs.S9F3: The data is assumed to be correct format and is not checked.
S9F3(MHEAD) - Constructor for class com.ergotech.secs.S9F3: Creates this message from one MHEAD.
S9F3(SecsMsg) - Constructor for class com.ergotech.secs.S9F3: Creates this message from the message that caused the error.
S9F5 - Class in com.ergotech.secs: Unrecognized Function Type (UFN).
S9F5() - Constructor for class com.ergotech.secs.S9F5: Required empty constructor.
S9F5(SecsFormat) - Constructor for class com.ergotech.secs.S9F5: The data is assumed to be correct format and is not checked.
S9F5(MHEAD) - Constructor for class com.ergotech.secs.S9F5: Creates this message from one MHEAD.
S9F5(SecsMsg) - Constructor for class com.ergotech.secs.S9F5: Creates this message from the message that caused the error.
S9F7 - Class in com.ergotech.secs: Illegal Data (IDN).
S9F7() - Constructor for class com.ergotech.secs.S9F7: Required empty constructor.
S9F7(SecsFormat) - Constructor for class com.ergotech.secs.S9F7: The data is assumed to be correct format and is not checked.
S9F7(MHEAD) - Constructor for class com.ergotech.secs.S9F7: Creates this message from one MHEAD.
S9F7(SecsMsg) - Constructor for class com.ergotech.secs.S9F7: Creates this message from the message that caused the error.
S9F9 - Class in com.ergotech.secs: Transaction Timer Timeout (TTN).
S9F9() - Constructor for class com.ergotech.secs.S9F9: Required empty constructor.
S9F9(SecsFormat) - Constructor for class com.ergotech.secs.S9F9: The data is assumed to be correct format and is not checked.
S9F9(SHEAD) - Constructor for class com.ergotech.secs.S9F9: Creates this message from one SHEAD.
S9F9(SecsMsg) - Constructor for class com.ergotech.secs.S9F9: Creates this message from the message that caused the error.
SARM - Class in com.ergotech.secs: SARM.
SARM(byte) - Constructor for class com.ergotech.secs.SARM: Create a new message with an 1-Byte integer (SecsFormat51).
SARM(SecsFormat) - Constructor for class com.ergotech.secs.SARM: Create a new message with the data contained in a SecsFormat object.
save(ECHandler) - Static method in class com.ergotech.secs.gem.GemToolPersistentModelSnapshot: Save the gem variable states.
save() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Persist a property.
saveModel() - Method in class com.ergotech.secs.gem.GemEquipment: Save the GEM model to the Persistence File.
saveModel() - Method in class com.ergotech.secs.gem.GemHandler: Save the model.
SC - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Header for an SC PDU.
Scaler - Class in com.ergotech.vib.manipulators: This manipulator adjusts an input value with a simple formula: mx + y where x is the input value.
Scaler() - Constructor for class com.ergotech.vib.manipulators.Scaler: Default constructor.
scriptExtensionSubstition(String) - Static method in class com.ergotech.vib.servers.DataSource: Extension to standard scripts.
SD1 - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Header for an SD1 PDU.
SD2 - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Header for an SD2 PDU.
SD4 - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Header for an SD4 PDU.
secondBooleanInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.And: This is the input method for the second input value, just a pass-through to the secondBooleanInput in the superclass.
secondBooleanInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Or: This is the input method for the second input value, just a pass-through to the secondBooleanInput in the superclass.
secondBooleanInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Xor: This is the input method for the second input value, just a pass-through to the secondBooleanInput in the superclass.
seconds - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
seconds(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the seconds of the minute.
secondValue - Variable in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This is the input value received at the secondValueChanged input.
secondValue - Variable in class com.ergotech.vib.manipulators.MasterCalculator: This is the input value received at the secondValueInput.
secondValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Add: This is the input method for the second value.
secondValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.BitwiseAnd: This is the input method for the second value.
secondValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.BitwiseOr: This is the input method for the second value.
secondValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.BitwiseXor: This is the input method for the second value.
secondValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Multiply: This is the input method for the second value.
SECS1_244BLOCK - Static variable in class com.ergotech.secs.SecsMsg: Send multiblock messages when the connection is SECSI and the message data is larger than 244 bytes.
SECS1_MULTIBLOCK - Static variable in class com.ergotech.secs.SecsMsg: Send multiblock messages when the connection is SECSI and the message is multiblock.
SecsCommunicationsFailureException - Exception in com.ergotech.secs: Thrown when the HSMS layer has a communications failure.
SecsCommunicationsFailureException() - Constructor for exception com.ergotech.secs.SecsCommunicationsFailureException
SecsCommunicationsFailureException(String) - Constructor for exception com.ergotech.secs.SecsCommunicationsFailureException
SecsDataStructure - Class in com.ergotech.secs: This is the abstract superclass of all secs data structures (SVID, VID, SV, ect) Each subclass must implement the following to work with the rest of the system...
SecsDataStructure() - Constructor for class com.ergotech.secs.SecsDataStructure
SecsDefinedMessage - Interface in com.ergotech.transsecs.secs: Remote interface for the Message superclass
secsEvent(SecsEvent) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This will receive a PORT_ERROR.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.gem.GemHandler: This method will be called when a SecsEvent accurs.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.gem.Log4JLogger: Passed through to the log4j logger.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.HSMSActiveWrapper: Catches incoming PORT_ERROR and re-starts the connection thread if it has been configured.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.HSMSWrapper: Catches incoming PORT_ERROR and SESSION_CREATED events and removes the portManager.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.Logger: The implementation of the SecsEventListener interface.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.NetLogger
secsEvent(SecsEvent) - Method in class com.ergotech.secs.PassThroughMessageHandler: Catch the secs events.
SecsEvent - Class in com.ergotech.secs: This event is he superclass for all SECS events.
SecsEvent(Object) - Constructor for class com.ergotech.secs.SecsEvent: This is the generic constructor.
SecsEvent(Object, int) - Constructor for class com.ergotech.secs.SecsEvent: This constructor is here if you want to post an event with only the event number.
SecsEvent(Object, int, int) - Constructor for class com.ergotech.secs.SecsEvent: This constructor is here if you want to post an event with only the event number.
SecsEvent(Object, int, String) - Constructor for class com.ergotech.secs.SecsEvent: This constructor is here if you want to post an event with only the event number.
SecsEvent(Object, int, int, String) - Constructor for class com.ergotech.secs.SecsEvent: This constructor if you only want to post the id and the name of the event.
SecsEvent(Object, int, int, String, Object) - Constructor for class com.ergotech.secs.SecsEvent: This constructor is used when you have all the information for a normal event (normal lvl).
SecsEvent(Object, int, int, String, int, Object) - Constructor for class com.ergotech.secs.SecsEvent: This is the most common constructor for SecsEvents that are created from a server.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.SecsEventHandler: This is usually called by another SecsEventHandler.
secsEvent(SecsEvent) - Method in interface com.ergotech.secs.SecsEventListener: This method will be called when a SecsEvent accurs.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.SecsIWrapper: Catches incoming PORT_ERROR events and removes the portManager.
secsEvent(SecsEvent) - Method in class com.ergotech.secs.SyslogLogger
secsEvent(SecsEvent) - Method in class com.ergotech.secs.TransactionManager: Catch the secs events.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Updates the status of the connection on any event.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Passed through to the log4j logger.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.SecsEventFilter: Receive the event and update the output.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur.ConnectionEventListener
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.VIBLogger: Called to display the SECS events.
secsEvent(SecsEvent) - Method in class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: Catch the secs events.
SecsEventFilter - Class in com.ergotech.transsecs.secs: This component has no input, but just listens for SecsEvents.
SecsEventFilter() - Constructor for class com.ergotech.transsecs.secs.SecsEventFilter: The default constructor.
SecsEventHandler - Class in com.ergotech.secs: This object will handle all events posted to it.
SecsEventHandler() - Constructor for class com.ergotech.secs.SecsEventHandler
SecsEventListener - Interface in com.ergotech.secs: This interface is used by any object that wants to receive SecsEvents.
SecsException - Exception in com.ergotech.secs
SecsException() - Constructor for exception com.ergotech.secs.SecsException
SecsException(String) - Constructor for exception com.ergotech.secs.SecsException
SecsException(String, int) - Constructor for exception com.ergotech.secs.SecsException
SecsFormat - Interface in com.ergotech.secs: This is the interface for all SecsFormat objects.
SecsFormat00 - Class in com.ergotech.secs: This class is a representation of a Format00 or "List".
SecsFormat00() - Constructor for class com.ergotech.secs.SecsFormat00: Required default constructor
SecsFormat00(SecsFormat[]) - Constructor for class com.ergotech.secs.SecsFormat00: Create the list from an array of SecsFormat objects.
SecsFormat00(int) - Constructor for class com.ergotech.secs.SecsFormat00: Creates an empty list of the provided length.
SecsFormat00(SecsFormat) - Constructor for class com.ergotech.secs.SecsFormat00: Creates a list of length one containing only the object provided.
SecsFormat00PayloadDecoder() - Constructor for class com.ergotech.vib.servers.mqttwrapper.MqttWrapper.SecsFormat00PayloadDecoder
secsFormat00ToJSON(SecsFormat00) - Static method in class com.ergotech.secs.JSONEncodeDecode: Encode a SecsFormat00 to a JSON Object.
SecsFormat10 - Class in com.ergotech.secs: This class holds binary data.
SecsFormat10() - Constructor for class com.ergotech.secs.SecsFormat10: Required empty constructor.
SecsFormat10(boolean) - Constructor for class com.ergotech.secs.SecsFormat10: Construct a SecsFormat10 that has a single byte representing the value of the binary data.
SecsFormat10(boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class com.ergotech.secs.SecsFormat10: Construct a SecsFormat10 that has a single byte representing the bits passed.
SecsFormat10(String) - Constructor for class com.ergotech.secs.SecsFormat10: This constructor will take either a unsigned byte (value between 0 - 255) or a hex value (0xAA).
SecsFormat10(byte) - Constructor for class com.ergotech.secs.SecsFormat10: Construct a SecsFormat10 that has a single byte representing the byte passed.
SecsFormat10(byte[]) - Constructor for class com.ergotech.secs.SecsFormat10: Construct a SecsFormat10 from the byte array passed.
SecsFormat10(int) - Constructor for class com.ergotech.secs.SecsFormat10: Construct a SecsFormat10 that has a single byte representing the int passed.
SecsFormat11 - Class in com.ergotech.secs: A representation of of the SECS Format11 (Boolean)
SecsFormat11() - Constructor for class com.ergotech.secs.SecsFormat11: Creates a new object with the value "false".
SecsFormat11(boolean) - Constructor for class com.ergotech.secs.SecsFormat11: Creates a new object with the value provided.
SecsFormat11(int) - Constructor for class com.ergotech.secs.SecsFormat11: Creates a new object.
SecsFormat20 - Class in com.ergotech.secs
SecsFormat20() - Constructor for class com.ergotech.secs.SecsFormat20
SecsFormat20(String) - Constructor for class com.ergotech.secs.SecsFormat20
SecsFormat20(char[]) - Constructor for class com.ergotech.secs.SecsFormat20
SecsFormat22 - Class in com.ergotech.secs: Unicode Secs Format.
SecsFormat22() - Constructor for class com.ergotech.secs.SecsFormat22: Creates an empty string using the default encoding.
SecsFormat22(String, String, int) - Constructor for class com.ergotech.secs.SecsFormat22: Create a new object with a value, encoding and code.
SecsFormat22(String, int) - Constructor for class com.ergotech.secs.SecsFormat22: Create a new object with a value, encoding and code.
SecsFormat22(char[], int) - Constructor for class com.ergotech.secs.SecsFormat22
SecsFormat22(byte[], int) - Constructor for class com.ergotech.secs.SecsFormat22
SecsFormat30 - Class in com.ergotech.secs
SecsFormat30() - Constructor for class com.ergotech.secs.SecsFormat30: Creates a new object with the value 0.
SecsFormat30(long) - Constructor for class com.ergotech.secs.SecsFormat30: Creates a new object with the value provided.
SecsFormat30(int) - Constructor for class com.ergotech.secs.SecsFormat30: Creates a new object with the value provided.
SecsFormat31 - Class in com.ergotech.secs
SecsFormat31() - Constructor for class com.ergotech.secs.SecsFormat31: Creates a new object with an initial value of zero.
SecsFormat31(int) - Constructor for class com.ergotech.secs.SecsFormat31: Create a SecsFormat31 from an int value.
SecsFormat31(long) - Constructor for class com.ergotech.secs.SecsFormat31: Create a SecsFormat31 from a long value.
SecsFormat31(byte) - Constructor for class com.ergotech.secs.SecsFormat31: Create a SecsFormat31 from a byte value.
SecsFormat32 - Class in com.ergotech.secs
SecsFormat32() - Constructor for class com.ergotech.secs.SecsFormat32: Creates a new object with the initial value of zero.
SecsFormat32(short) - Constructor for class com.ergotech.secs.SecsFormat32: Create a SecsFormat32 from an short value.
SecsFormat32(int) - Constructor for class com.ergotech.secs.SecsFormat32: Create a SecsFormat34 from an int value.
SecsFormat32(long) - Constructor for class com.ergotech.secs.SecsFormat32: Create a SecsFormat34 from an long value.
SecsFormat34 - Class in com.ergotech.secs
SecsFormat34() - Constructor for class com.ergotech.secs.SecsFormat34: Creates a new object with the initial value of zero.
SecsFormat34(long) - Constructor for class com.ergotech.secs.SecsFormat34: Create a SecsFormat34 from a long value.
SecsFormat34(int) - Constructor for class com.ergotech.secs.SecsFormat34: Create a SecsFormat34 from an int value.
SecsFormat34(short) - Constructor for class com.ergotech.secs.SecsFormat34: Create a SecsFormat34 from a short value.
SecsFormat34(byte) - Constructor for class com.ergotech.secs.SecsFormat34: Create a SecsFormat34 from a byte value.
SecsFormat3x - Interface in com.ergotech.secs: Generic superclass of the int data types.
SecsFormat3x5x - Interface in com.ergotech.secs: Generic superclass of the int data types.
SecsFormat40 - Class in com.ergotech.secs: This object represents the SECS Format 40 - eight byte floating point.
SecsFormat40() - Constructor for class com.ergotech.secs.SecsFormat40: Create a SecsFormat40 with an initial value of zero.
SecsFormat40(float) - Constructor for class com.ergotech.secs.SecsFormat40: Create a SecsFormat40 from a float value.
SecsFormat40(double) - Constructor for class com.ergotech.secs.SecsFormat40: Create a SecsFormat40 from a double value.
SecsFormat44 - Class in com.ergotech.secs: This object represents the SECS Format 40 - 4 byte floating point.
SecsFormat44() - Constructor for class com.ergotech.secs.SecsFormat44: Create a SecsFormat44 with an initial value of zero.
SecsFormat44(float) - Constructor for class com.ergotech.secs.SecsFormat44: Create a SecsFormat44 from the floating point value.
SecsFormat4x - Interface in com.ergotech.secs: Generic superclass of the float data types.
SecsFormat50 - Class in com.ergotech.secs: This class represents a 8-byte unsigned integer.
SecsFormat50() - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 with an initial value of zero.
SecsFormat50(long) - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 from a long value.
SecsFormat50(BigInteger) - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 from a BigInteger value.
SecsFormat50(int) - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 from an int value.
SecsFormat50(short) - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 from a short value.
SecsFormat50(byte) - Constructor for class com.ergotech.secs.SecsFormat50: Create a SecsFormat50 from a byte value.
SecsFormat51 - Class in com.ergotech.secs: This class represents a 1-byte unsigned integer.
SecsFormat51() - Constructor for class com.ergotech.secs.SecsFormat51: Creates a new object with an initial value of zero.
SecsFormat51(long) - Constructor for class com.ergotech.secs.SecsFormat51: Create a SecsFormat51 from a long value.
SecsFormat51(int) - Constructor for class com.ergotech.secs.SecsFormat51: Create a SecsFormat51 from an int value.
SecsFormat51(short) - Constructor for class com.ergotech.secs.SecsFormat51: Create a SecsFormat51 from a short value.
SecsFormat51(byte) - Constructor for class com.ergotech.secs.SecsFormat51: Create a SecsFormat51 from a byte value.
SecsFormat52 - Class in com.ergotech.secs: This class represents a 2-byte unsigned integer.
SecsFormat52() - Constructor for class com.ergotech.secs.SecsFormat52: Create a SecsFormat52 with an initial value of zero.
SecsFormat52(long) - Constructor for class com.ergotech.secs.SecsFormat52: Create a SecsFormat52 from a long value.
SecsFormat52(int) - Constructor for class com.ergotech.secs.SecsFormat52: Create a SecsFormat52 from an int value.
SecsFormat52(short) - Constructor for class com.ergotech.secs.SecsFormat52: Create a SecsFormat52 from a short value.
SecsFormat52(byte) - Constructor for class com.ergotech.secs.SecsFormat52: Create a SecsFormat52 from a byte value.
SecsFormat54 - Class in com.ergotech.secs: This class represents a 4-byte unsigned integer.
SecsFormat54() - Constructor for class com.ergotech.secs.SecsFormat54: Create a SecsFormat54 with an initial value of zero.
SecsFormat54(long) - Constructor for class com.ergotech.secs.SecsFormat54: Create a SecsFormat54 from a long value.
SecsFormat54(int) - Constructor for class com.ergotech.secs.SecsFormat54: Create a SecsFormat54 from an int value.
SecsFormat54(short) - Constructor for class com.ergotech.secs.SecsFormat54: Create a SecsFormat54 from a short value.
SecsFormat54(byte) - Constructor for class com.ergotech.secs.SecsFormat54: Create a SecsFormat54 from a byte value.
SecsFormat5x - Interface in com.ergotech.secs: Generic superclass of the unsigned int data types.
SecsFormat99 - Class in com.ergotech.transsecs.secs: SecsFormat99 is generated by TransSECS to hold the place for an "any" data type in VID lists and other messages.
SecsFormat99(ValueObjectInterface) - Constructor for class com.ergotech.transsecs.secs.SecsFormat99
secsFormatToJSON(SecsFormat) - Static method in class com.ergotech.secs.JSONEncodeDecode: Encode a SecsFormat to a JSON Object.
secsFormatType(SecsFormat) - Static method in class com.ergotech.secs.JSONEncodeDecode: Return a string representing the type of the SecsFormat.
SecsFormatValueObject - Class in com.ergotech.secs.gem: This value object wraps a SecsFormat object.
SecsFormatValueObject() - Constructor for class com.ergotech.secs.gem.SecsFormatValueObject: The default constructor.
SecsFormatValueObject(SecsFormat, int, Date, Color) - Constructor for class com.ergotech.secs.gem.SecsFormatValueObject: Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and the quality.
SecsFormatValueObject(SecsFormat, int, Date) - Constructor for class com.ergotech.secs.gem.SecsFormatValueObject: Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and QUALITY_GOOD.
SecsFormatValueObject(SecsFormat, int) - Constructor for class com.ergotech.secs.gem.SecsFormatValueObject: Creates a value object with the current SecsFormat value, the color associated with that value (newColor) and QUALITY_GOOD.
SecsFormatValueObject(SecsFormat) - Constructor for class com.ergotech.secs.gem.SecsFormatValueObject: Creates a value object with the current value, a null color and QUALITY_GOOD.
SecsHSMSDeselectException - Exception in com.ergotech.secs: Thrown when the HSMS layer receives either a Deselect.req or a Separate.req.
SecsHSMSDeselectException() - Constructor for exception com.ergotech.secs.SecsHSMSDeselectException
SecsHSMSDeselectException(String) - Constructor for exception com.ergotech.secs.SecsHSMSDeselectException
SecsHSMSDeselectException(String, int) - Constructor for exception com.ergotech.secs.SecsHSMSDeselectException
SecsHSMSRejectException - Exception in com.ergotech.secs: Thrown when the HSMS layer receives either a Reject.req.
SecsHSMSRejectException() - Constructor for exception com.ergotech.secs.SecsHSMSRejectException
SecsHSMSRejectException(String) - Constructor for exception com.ergotech.secs.SecsHSMSRejectException
SecsIChecksumException - Exception in com.ergotech.secs: Thrown when the HSMS layer receives either a Reject.req.
SecsIChecksumException() - Constructor for exception com.ergotech.secs.SecsIChecksumException
SecsIChecksumException(String) - Constructor for exception com.ergotech.secs.SecsIChecksumException
SecsIConnectionManager - Class in com.ergotech.secs: There are two threads and a queue used by this object to acomplish its goals.
SecsISessionManager - Class in com.ergotech.secs: This object provides the transport layer for SECS-I.
SecsISocketManager - Class in com.ergotech.secs: This object supports execution of SECSI over a socket link.
SecsISocketManager(int, String) - Constructor for class com.ergotech.secs.SecsISocketManager: Creates the SECS1 socket manager.
SecsISocketManager(int, int) - Constructor for class com.ergotech.secs.SecsISocketManager: Creates the SECS1 socket manager.
SecsIWrapper - Class in com.ergotech.secs: This is the wrapper for the SECSI interface.
SecsIWrapper(int, int) - Constructor for class com.ergotech.secs.SecsIWrapper: The constructor.
SecsMsg - Class in com.ergotech.secs: This object models the SECSII Messages.
SecsMsg() - Constructor for class com.ergotech.secs.SecsMsg: Default constructor.
SecsTrigger - Class in com.ergotech.secs: This object is the super class for all the SecsMessages.
SecsTrigger() - Constructor for class com.ergotech.secs.SecsTrigger
SecsValueOutOfRangeException - Exception in com.ergotech.secs
SecsValueOutOfRangeException() - Constructor for exception com.ergotech.secs.SecsValueOutOfRangeException
SecsValueOutOfRangeException(String) - Constructor for exception com.ergotech.secs.SecsValueOutOfRangeException
selected - Variable in class com.ergotech.secs.HSMSSessionManager: The end user should never need to set this.
selectSession() - Method in class com.ergotech.secs.HSMSSessionManager: Select the session.
SEND_MESSAGE_NAME - Static variable in class com.ergotech.transsecs.secs.LocalMessageReference: This is the name that we publish use to send the.
SEND_MESSAGE_NAME - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: This is the name that we publish use to send the.
sendColors - Variable in class com.ergotech.vib.servers.DataSource: a boolean indicating whether or not this data source should send value-based color information to its connectors
sendErrorMessages - Variable in class com.ergotech.secs.SessionManager: Whether we send the S9Fx messages for unknown streams and functions.
sendErrorResponse(SecsMsg, boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Send the S2F42 if appropriate.
sendErrors - Static variable in class com.ergotech.secs.SecsMsg: Indicate whether we will send S9 messages for unhandled incoming messages.
SendEvent - Class in com.ergotech.secs.gem
SendEvent() - Constructor for class com.ergotech.secs.gem.SendEvent
sendEvent(String) - Method in class com.ergotech.secs.gem.SendEvent: This method sends the S6F11 event for the given ID.
sendEventReport(SecsFormat) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This method will attempt to send an appropriate message for the id.
sendEventReport(SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: This method will attempt to send an appropriate message for the id.
sendEventReport(SecsFormat, Map<SecsFormat3x5x, SecsFormat>) - Method in class com.ergotech.secs.gem.GemHandler: This method will attempt to send an appropriate message for the id.
sendEventReport(int, Map<SecsFormat3x5x, SecsFormat>) - Method in class com.ergotech.secs.gem.GemHandler: This method will attempt to send an appropriate message for the id.
sendHSMSHeaderMessage(byte, byte, int, int) - Method in class com.ergotech.secs.HSMSSessionManager: This message creates a message that is only the HSMS header and sends it.
sendHSMSHeaderMessage(byte, byte, int, SecsMsg) - Method in class com.ergotech.secs.HSMSSessionManager: This message creates a message that is only the HSMS header and sends it.
sendingAllowed(SecsMsg, Map<String, MessageVerifier>) - Method in class com.ergotech.secs.gem.OnlineHandler: This will return true if the msg is allowed to be sent while in local_online mode.
sendInterleaved - Static variable in class com.ergotech.secs.SecsISessionManager: Set to true to allow sending of interleaved messages.
sendMessage(byte[][]) - Method in class com.ergotech.secs.ConnectionManager: Send multi-block data out through the connection.
sendMessage(byte[]) - Method in class com.ergotech.secs.ConnectionManager: Send data out through the connection.
sendMessage(byte[]) - Method in interface com.ergotech.secs.ConnectionManagerInterface: Send data out through the connection.
sendMessage(byte[]) - Method in class com.ergotech.secs.HSMSConnectionManager: Send the message through the port.
sendMessage() - Method in class com.ergotech.secs.HSMSHeaderMsg: Used for debugging only.
sendMessage(SecsMsg) - Method in class com.ergotech.secs.HSMSSessionManager
sendMessage(byte[][]) - Method in class com.ergotech.secs.SecsIConnectionManager: Send a multi-block message.
sendMessage(byte[]) - Method in class com.ergotech.secs.SecsIConnectionManager: send the message
sendMessage(SecsMsg) - Method in class com.ergotech.secs.SecsISessionManager: Sends the SECS Message over the HSMS link.
sendMessage() - Method in class com.ergotech.secs.SecsMsg: Sends the message.
sendMessage(SecsMsg) - Method in class com.ergotech.secs.SessionManager: Sends the SECS Message over the HSMS link.
sendMessage() - Method in interface com.ergotech.transsecs.secs.SecsDefinedMessage: Send the message.
sendMessage(Object) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sends the message and notify the delegate when the response is recevied.
sendMessage() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Send the message.
sendMessage(int) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Send the message.
sendMessage(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: This method will send the message.
sendMessageAndWait() - Method in class com.ergotech.secs.SecsMsg: Sends a message using sendMessage and waits for a response.
sendMessageAndWait() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sends the message and waits for the response.
sendMessageAndWait(int) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sends the message and waits for the response.
sendMessageFromOPC() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Send a message from an OPC server.
sendMessageInternal() - Method in class com.ergotech.secs.SecsMsg: If all the send message checks pass then this routine will actually send the message.
sendMultiBlockMsg(SecsMsg) - Method in class com.ergotech.secs.MultiBlockRequest: Will send this message and if the response is OK it will send the real message.
sendOnce() - Method in class com.ergotech.secs.LinkTest: Sends one link test message.
sendResponse(VIBMessageBean, SecsMsg) - Method in class com.ergotech.transsecs.secs.TransSecsController: /** This method will send a response to a received message.
sendS9F7(SecsMsg) - Static method in class com.ergotech.secs.gem.GemHandler: Send an S9F7 message.
sendSxF0(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: Send the SxF0 message.
sendValue() - Method in class com.ergotech.vib.manipulators.Constant: This will start the server, sending the value.
sent(SecsMsg) - Method in class com.ergotech.secs.gem.Log4JLogger: Called when a message is sent.
sent(byte[]) - Method in class com.ergotech.secs.gem.Log4JLogger: Called when a message is sent.
sent(SecsMsg) - Method in class com.ergotech.secs.Logger: Called whenever a message is sent.
sent(byte[]) - Method in class com.ergotech.secs.Logger: This will display sent bytes.
sent(SecsMsg) - Method in interface com.ergotech.secs.LoggerInterface: Called whenever a message is sent.
sent(byte[]) - Method in interface com.ergotech.secs.LoggerInterface: Called whenever data is sent through the port.
sent(SecsMsg) - Method in class com.ergotech.secs.NetLogger
sent(byte[]) - Method in class com.ergotech.secs.NetLogger
sent(SecsMsg) - Method in class com.ergotech.secs.SyslogLogger
sent(byte[]) - Method in class com.ergotech.secs.SyslogLogger
sent(SecsMsg) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Called when a message is sent.
sent(byte[]) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Called when a message is sent.
sent(SecsMsg) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
sent(byte[]) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
sent(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBLogger: Called to display the SML of the sent message.
sent(byte[]) - Method in class com.ergotech.transsecs.secs.VIBLogger: Called to display the byte stream sent.
separateSession() - Method in class com.ergotech.secs.HSMSSessionManager: Separate the session.
SERIAL - Static variable in class com.ergotech.vib.ports.SerialWrapper: The string used to identify a port.
serialMappingFileName - Static variable in class com.ergotech.vib.ports.SerialWrapper: The name of the mapping file.
SerialPortDevice - Class in com.ergotech.vib.ports.serial: This reads and writes a serial port.
SerialPortDevice() - Constructor for class com.ergotech.vib.ports.serial.SerialPortDevice: This sets the factory name.
SerialPortFactory - Class in com.ergotech.vib.ports: This factory will provide a serial port that matches the parameters provided.
SerialPortFactory(String) - Constructor for class com.ergotech.vib.ports.SerialPortFactory: Create the port factory with a specific name.
SerialPortManager - Class in com.ergotech.secs
SerialPortManager(int, String) - Constructor for class com.ergotech.secs.SerialPortManager: Creates the SECS1 port manager.
SerialPortManager(int, int) - Constructor for class com.ergotech.secs.SerialPortManager: Creates the SECS1 port manager.
SerialPortManipulator - Class in com.ergotech.vib.manipulators: This reads and writes a serial port.
SerialPortManipulator() - Constructor for class com.ergotech.vib.manipulators.SerialPortManipulator
serialVersionUID - Static variable in interface com.ergotech.secs.SecsFormat3x
serialVersionUID - Static variable in interface com.ergotech.secs.SecsFormat4x
serialVersionUID - Static variable in interface com.ergotech.secs.SecsFormat5x
serialVersionUID - Static variable in interface com.ergotech.secs.WrapperInterface
serialVersionUID - Static variable in class com.ergotech.vib.manipulators.Counter
serialVersionUID - Static variable in class com.ergotech.vib.manipulators.PassOnThread
serialVersionUID - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
SerialWrapper - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
SerialWrapper() - Constructor for class com.ergotech.vib.ports.SerialWrapper: Create the wrapper without setting the port (used by BlueTooth).
SerialWrapper(String) - Constructor for class com.ergotech.vib.ports.SerialWrapper: The port name for a serial port consists of the string "SERIAL" followed by the port number, for example "SERIAL0", "SERIAL1", etc.
serverAttached(DataSource) - Method in class com.ergotech.vib.servers.MarqueeDeviceServer: Return true if the server has been attached to a MarqueeServer already.
ServersDeviceManager - Class in com.ergotech.vib.servers: This is a device manager that allows creation of servers
ServersDeviceManager() - Constructor for class com.ergotech.vib.servers.ServersDeviceManager
SESSION_CREATED - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a session is created.
SessionManager - Class in com.ergotech.secs: The session manager object is the superclass of the specific session managers.
SessionManager() - Constructor for class com.ergotech.secs.SessionManager: The default constructor.
SessionManagerTimeoutTimer - Class in com.ergotech.secs: This class is designed to call a single method tick() on an object every x number of milliseconds.
SessionManagerTimeoutTimer(SessionManager) - Constructor for class com.ergotech.secs.SessionManagerTimeoutTimer: The constructor for this class.
set() - Method in class com.ergotech.secs.gem.GemALID: Sets the alarm and triggers the event if enabled.
set(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemALID: Sets the alarm and triggers the event if enabled.
set - Variable in class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable: True if the alarm has been "set".
set(int, ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
set_Messages(VIBMessageBean) - Method in class TransSECS.MessageNotifierEventArgs
set_Status(int) - Method in class TransSECS.MessageNotifierEventArgs
setAccessLevel(Level) - Method in class com.ergotech.transsecs.secs.Log4JLogger: enables overrride of log4j.xml access level from command line (i.e., for orgi which sets -lb=info, -le=debug, -lm=warn)
setActive(boolean) - Method in class com.ergotech.secs.HSMSWrapper: Determines whether newly created sessions should be set to the active session.
setActive(boolean) - Method in interface com.ergotech.secs.WrapperInterface: Determines whether newly created sessions should be set to the active session.
setActiveConnectionRetryInterval(double) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the frequency of connection attempt of all active connections.
setActiveEntityFlag(boolean) - Method in class com.ergotech.secs.ConnectionManager: Controls whether we are the active entity.
setActivePort(int) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Get the active T1.
setActivePort(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Sets the port that this object will use to make an active connection.
setActiveT1(double) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT1(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT2(double) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT2(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT3(double) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT3(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT4(double) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT4(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT5(int) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT5(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT6(int) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT6(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT7(int) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT7(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveT8(int) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the active T1.
setActiveT8(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setActiveToolTarget(String) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Sets the tool that will be the target.
setAdditionalWhere(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the String for the additional items in the WHERE (will be prepended with " and ".
setAddress(String) - Method in class com.ergotech.vib.servers.ab.DF1Server: Sets the PLC address.
setAddress(String) - Method in class com.ergotech.vib.servers.fins.FinsServer: Sets the PLC address.
setAddress(String) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Sets the PLC address.
setAddress(String) - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Sets the PLC address.
setAddress(String) - Method in class com.ergotech.vib.servers.ppi.PPIServer: Sets the PLC address.
setAddressType(String) - Method in class com.ergotech.vib.servers.plc.PLCServer: Sets the address type.
setAdministrators(String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
setAlarm(SecsFormat3x5x) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Set Alarm will trigger an alarm.
setAlarm(int) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Set Alarm will trigger an alarm.
setAlarm(int) - Method in class com.ergotech.secs.gem.GemHandler: Set Alarm will trigger an alarm.
setAlarm(SecsFormat3x5x) - Method in class com.ergotech.secs.gem.GemHandler: Set Alarm will trigger an alarm.
setAlarm(SecsFormat3x5x, Hashtable<SecsFormat3x5x, SecsFormat>) - Method in class com.ergotech.secs.gem.GemHandler: Set Alarm will trigger an alarm.
setAlarm(String, Map<String, Integer>) - Method in class com.ergotech.secs.gem.SendEvent: This method sends an S5F1 for given ID.
setAlarm(int, boolean) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
setAlarmWriter(AlarmWriter) - Method in class com.ergotech.secs.gem.GemALID
setALCD(byte) - Method in class com.ergotech.secs.gem.GemALID: Sets the alarm code flag.
setALED(boolean) - Method in class com.ergotech.secs.gem.GemALID: Sets the alarm enabled flag.
setAlidSecsFormat(int) - Method in class com.ergotech.secs.gem.GemHostModel
setAllLimitToUndefined() - Method in class com.ergotech.secs.gem.GemHandler: This will set all limits to undefined.
setAllLimitToUndefined(GemVID) - Method in class com.ergotech.secs.gem.GemHandler: This will set all limits for a specific VID to undefined.
setAllowDuplicateMessages(boolean) - Method in class com.ergotech.secs.SecsIConnectionManager: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
setAllowDuplicateMessages(boolean) - Method in class com.ergotech.secs.SecsIWrapper: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
setAllowDuplicateSECSIMessages(boolean) - Method in class com.ergotech.transsecs.secs.TransSecsController: Set to true if the system bytes of the message do not need to be unique (mis-implemented SECSI messages).
setAllUsers(Hashtable) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
setALTX(String) - Method in class com.ergotech.secs.gem.GemALID: Set the alarm text.
setAlwaysSend(boolean) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is if you always want this value to be send to the client...
setAlwaysSend(boolean) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will force the value to be sent to the client, even if the value hasn't changed.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsDataStructure: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in interface com.ergotech.secs.SecsFormat: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat00: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat10: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat11: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat20: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat22: This allows for a standard way to set arrays of secsformats.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat30: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat31: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat32: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat34: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in interface com.ergotech.secs.SecsFormat3x: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat40: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat44: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat50: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat51: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat52: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.secs.SecsFormat54: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in interface com.ergotech.secs.SecsFormat5x: Set the data array if this is an array.
setArray(SecsFormat[]) - Method in class com.ergotech.transsecs.secs.SecsFormat99
setAutoMode(boolean) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new boolean value for the automode
setAutoReset(boolean) - Method in class com.ergotech.vib.manipulators.Counter
setAutoSuspend(int) - Method in class com.ergotech.vib.servers.DataSource: Setting this will make a server stop checking for values when there are not any connectors.
setAutoSuspend(int) - Method in class com.ergotech.vib.servers.SimpleDataSource: This method will set the auto suspend status of all the data sources, this and the children, to the new value.
setBaseDirectory(String) - Method in class com.ergotech.transsecs.secs.FileRead: Sets the base directory.
setBaseDirectory(String) - Method in class com.ergotech.transsecs.secs.FileRecipeManager: Sets the base directory.
setBaudRate(int) - Method in class com.ergotech.secs.SecsIWrapper: Sets the baudrate for the current connection.
setBaudRate(int) - Method in class com.ergotech.secs.SerialPortManager: Sets the baud rate for the server.
setBaudRate(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Set the Baud Rate of a SECSI connection.
setBaudRate(int) - Method in class com.ergotech.transsecs.secs.TransSecsController: set the baud rate.
setBaudRate(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the baud rate.
setBaudRate(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the baud rate.
setBaudRate(int) - Method in class com.ergotech.vib.ports.SerialWrapper: This is the baud rate.
setBaudRate(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
setBaudRate(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
setBaudRate(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave
setBaudRate(int) - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer
setBaudRate(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
setBCD(boolean) - Method in class com.ergotech.vib.servers.plc.PLCServer
setBinaryAt(byte, int) - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: This will set a specific element in the array.
setBinaryValue(byte[]) - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: This will set the current value as an array.
setBit(int) - Method in class com.ergotech.vib.manipulators.BitSelector: Sets the bit to be filtered and calls update.
setBit(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: The bit to read if this word is being decomposed into bits.
setBitCount(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Set the bit count.
setBlockReads(boolean) - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Set to true to prevent the blocking of reads.
setBlueToothAddress(String) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer
setBooleanOutput(boolean) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets whether or not to generate only true/false array.
setBooleanValue(boolean) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the boolean value of the current value object.
setBooleanValue(int, boolean) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
setBooleanYColumns(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets how many boolean columns to generate.
setBoolValue(boolean) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the boolean value of the current value object.
setBumplessControl(boolean) - Method in class com.ergotech.vib.manipulators.spc.PidControl
setByteCount(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the byte count.
setByteOffset(int) - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Sets the offset of the register of this server.
setByteOffset(int) - Method in class com.ergotech.vib.servers.ppi.PPIServer: Sets the offset of the register of this server.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.fins.FinsServer: Sets whether strings are byte-swapped.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.fins.FinsString: Sets whether strings are byte-swapped.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Sets whether strings are byte-swapped.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.melsec.MelsecString: Sets whether strings are byte-swapped.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.modbus.ModbusString: Sets whether strings are byte-swapped.
setByteSwapString(boolean) - Method in class com.ergotech.vib.servers.modbus.ModbusStringArray: Sets whether strings are byte-swapped.
setByteValue(byte) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the byte value of the current value object.
setCARRIERID(CARRIERID) - Method in class com.ergotech.secs.CarrierSlotData
setCaseSensitive(boolean) - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This is if the strings (both true and false) are case sensitive or not.
setCategoryTimebase(String) - Method in class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer
setCategoryType(String) - Method in class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer
setCEID(GemCEID) - Method in class com.ergotech.secs.gem.GemVID: Sets the CEID associated with vid monitoring.
setCeidSecsFormat(int) - Method in class com.ergotech.secs.gem.GemHostModel
setChangeColorTo(String) - Method in class com.ergotech.vib.manipulators.PropertyFilter: This sets the Color to be used in the outgoing ValueObject.
setChangeTime(boolean) - Method in class com.ergotech.vib.manipulators.PropertyFilter: Set whether or not to change the timestamp to the current time for the outgoing ValueObject.
setChannel(int) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
setClassLicenseManager(TargetLicenseManager) - Static method in class com.ergotech.vib.servers.SimpleDataSource
setClassPackage(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the class package name.
setClearCEID(GemCEID) - Method in class com.ergotech.secs.gem.GemALID: Sets the alarm to set when the alarm is cleared.
setCMD(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Sets the CMD.
setCoilNotifyMax(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setCoilNotifyMax(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setCoilNotifyMin(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setCoilNotifyMin(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setColor(Color) - Method in class com.ergotech.vib.valueobjects.ValueObject: Sets the color object.
setColor(Color) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will set the ValueObject's color.
setColorHi(Color) - Method in class com.ergotech.vib.manipulators.Constant: Overridden to send the value when changed.
setColorHi(Color) - Method in class com.ergotech.vib.servers.DataSource: Sets the color for the server's Hi level.
setColorHiHi(Color) - Method in class com.ergotech.vib.manipulators.BitSelector: Sets the true (bit set) color.
setColorHiHi(Color) - Method in class com.ergotech.vib.manipulators.ByteSplitter: Need to change colorHiHi on all bitOutputs[]
setColorHiHi(Color) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: Sets the true color.
setColorHiHi(Color) - Method in class com.ergotech.vib.manipulators.MasterComparer: Sets the true color.
setColorHiHi(Color) - Method in class com.ergotech.vib.servers.DataSource: Sets the color for the server's HiHi level.
setColorLo(Color) - Method in class com.ergotech.vib.servers.DataSource: Sets the color for the server's Lo level.
setColorLoLo(Color) - Method in class com.ergotech.vib.manipulators.BitSelector: Sets the false (bit unset) color.
setColorLoLo(Color) - Method in class com.ergotech.vib.manipulators.ByteSplitter: Need to change colorLoLo on all bitOutputs[]
setColorLoLo(Color) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: Sets the false color.
setColorLoLo(Color) - Method in class com.ergotech.vib.manipulators.MasterComparer: Sets the false color.
setColorLoLo(Color) - Method in class com.ergotech.vib.servers.DataSource: Sets the color for the server's LoLo level.
setColorNormal(Color) - Method in class com.ergotech.vib.servers.DataSource: The normal color is sent any time the value is not in one of the other bands
setColumn(int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will set the column count to "columns" and reset any data inside the 2d value object.
setColumnAt(Vector<ValueObjectInterface>, int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will replace the column at the give index with the new column.
setColumnName(String, int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will set the applicationName of a specific column.
setColumnNames(Vector<String>) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This will return the vector of names.
setCommand(String) - Method in class com.ergotech.vib.manipulators.CommandExecutor
setCommunicationsHandlerFactoryClass(Class<? extends CommunicationsHandler>) - Method in class com.ergotech.secs.gem.GemEquipment: Set a subclass of the CommunicationsHandler as the factory class for communications control.
setCondition(String) - Method in class com.ergotech.secs.gem.Monitor: Sets the current condition for the component.
setConnectionConfig(ConnectionConfig) - Method in class com.ergotech.transsecs.secs.TransSecsController
setConnectionLimit(int) - Method in class com.ergotech.secs.HSMSPassiveWrapper: Set the connection limit.
setConnectionLimit(int) - Method in class com.ergotech.secs.HSMSSocketListener: Sets the maximum number of allowable connections.
setConnectionLimit(int) - Method in class com.ergotech.secs.HSMSSocketManager: Sets the maximum number of allowable connections.
setConnectionManager(ConnectionManager) - Method in class com.ergotech.secs.PortManager: Sets the connection manager for this connection.
setConnectOnSend(boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets connect on send.
setConsoleLogger(LoggerInterface) - Static method in class com.ergotech.vib.servers.DataSource
setConstantValue(String) - Method in class com.ergotech.vib.manipulators.Constant
setContainer(DataSourceContainer) - Method in class com.ergotech.vib.manipulators.string.CodeToString: Setting the container will reset the resource bundle since the resource bundle is dependent upon the container's classloader.
setContainer(DataSourceContainer) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Moves the server container to the new container.
setContainer(DataSourceContainer) - Method in class com.ergotech.vib.servers.SimpleDataSource
setControllerName(String) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: Sets the controllere name.
setControllerName(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the passive port name.
setControllerName(String) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the controller name.
setControllerPort(int) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the controller port.
setCountUp(boolean) - Method in class com.ergotech.vib.manipulators.Counter
setCPNAME(CPNAME) - Method in class com.ergotech.secs.CPNAMEVALPAIR
setCPVAL(CPVAL) - Method in class com.ergotech.secs.CPNAMEVALPAIR
setCurrentQualitySetting(int) - Method in class com.ergotech.transsecs.secs.PublishBean
setCurrentValue(SecsFormat) - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable: Sets the value of this variable.
setCustomTimer(boolean) - Method in class com.ergotech.vib.servers.SimpleDataSource: if we need our own Timer.
setD(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new value for the derivative parameter
setData(byte[]) - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Sets the data array.
setDataBits(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the data bits.
setDataBits(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the data bits.
setDataBits(int) - Method in class com.ergotech.vib.ports.SerialWrapper: This is the data bits.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsDataStructure: This is only be called on the raw secsFormat classes.
setDataFromByteArray(byte[], int, int) - Method in interface com.ergotech.secs.SecsFormat: stores the incoming value in the format object.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat00: This method should not be called.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat10: Set the variable from an array of bytes.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat11: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat20
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat22
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat30: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat31: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat32: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat34: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat40: This method will convert the incoming value to a 4 byte signed integer.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat44: This method will convert the incoming value to a 4 byte signed integer.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat50: This method will convert the incoming value to a 4 byte signed integer.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat51: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat52: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.secs.SecsFormat54: Interprets the data provided to create fill in an object of this type.
setDataFromByteArray(byte[], int, int) - Method in class com.ergotech.transsecs.secs.SecsFormat99
setDataFromPLC(byte[]) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
setDataId(int) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the dataId.
setDataIdSecsFormat(int) - Method in class com.ergotech.secs.gem.GemHostModel
setDataSourceName(String) - Method in class com.ergotech.vib.servers.DataSource: This method will change the applicationName that is associated with this data source.
setDataSourceName(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: This method will change the name that is associated with the primary data source of this component.
setDataType(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the dataType.
setDataValuesToWrite(ArrayValueObject) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
setDate(Date) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is the date and time when the value was created.
setDateFormatter(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is the date formatter used (by java.text.SimpleDataFormatter) to display the date (if setDate is true).
setDateOffset(long) - Method in class com.ergotech.secs.gem.GemHandler: Sets the current date offset.
setDeadband(double) - Method in class com.ergotech.secs.gem.GemVID: Saves the deadband.
setDebugLevel(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: This sets the debug level of this bean for system outs.
setDefault(boolean) - Method in class com.ergotech.secs.HSMSWrapper: Determines whether newly created sessions should be set to the default session.
setDefault(boolean) - Method in class com.ergotech.secs.SecsIWrapper: Determines whether newly created sessions should be set to the default session.
setDefault() - Method in class com.ergotech.secs.SessionManager: Set this session manager to be the default session manager.
setDefault(SessionManager) - Method in class com.ergotech.secs.SessionManager: Set this session manager to be the default session manager.
setDefault(boolean) - Method in interface com.ergotech.secs.WrapperInterface: Determines whether newly created sessions should be set to the default session.
setDefaultAllowDuplicateMessages(boolean) - Static method in class com.ergotech.secs.SecsIWrapper: If this flag is set then duplicate messages will be passed through as if they were not duplicate.
setDefaultLinkTestInterval(double) - Static method in class com.ergotech.secs.HSMSWrapper: Sets the default link test interval.
setDefaultOfflineState(int) - Method in class com.ergotech.secs.gem.OnlineHandler: The control state will transition to this state if an attempt online fails.
setDefaultReplaceString(String) - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Set the String to replace the tokens when the input array does not have the element requested.
setDefaultRetryInterval(double) - Static method in class com.ergotech.secs.HSMSActiveWrapper: Sets the default retry interval.
setDefaultSelectResponse(byte) - Static method in class com.ergotech.secs.HSMSSessionManager: Sets the global select response.
setDefaultString(String) - Method in class com.ergotech.vib.manipulators.string.CodeToString
setDefaultValue(SecsFormat) - Method in class com.ergotech.secs.gem.GemControlState: Set the default value.
setDefaultValue(SecsFormat) - Method in class com.ergotech.secs.gem.GemECID: Create and add a validator for this element.
setDefaultValue(SecsFormat) - Method in class com.ergotech.secs.gem.GemVID: Set the default value.
setDefaultValue(String) - Method in class com.ergotech.vib.manipulators.array.ArrayElementFilter: Sets the default value of this manipulator.
setDelimiter(String) - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Sets the delimiter String.
setDelimiter(String) - Method in class com.ergotech.vib.manipulators.array.StringToArray: Sets the delimiter String.
setDescription(String) - Method in class com.ergotech.secs.SecsEvent: This will set the description of the event.
setDestination(byte) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the destination address.
setDestinationNetworkAddress(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setDestinationNodeNumber(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setDestinationUnitNumber(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setDeviceId(int) - Method in class com.ergotech.secs.HSMSPassiveWrapper
setDeviceId(int) - Method in class com.ergotech.secs.HSMSWrapper: Sets the device id for this wrapper.
setDeviceId(int) - Method in class com.ergotech.secs.SecsIWrapper: Sets the default device ID.
setDeviceId(int) - Method in class com.ergotech.secs.SecsMsg: Sets the device ID.
setDeviceId(int) - Method in class com.ergotech.secs.SessionManager: Sets the device id for this port manager.
setDeviceId(int) - Method in interface com.ergotech.secs.WrapperInterface: this sets the current device id.
setDeviceId(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets the device Id.
setDeviceId(int) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the device id for this equipment.
setDeviceName(String) - Method in class com.ergotech.vib.servers.plc.PLCArray: Sets the name of the device server
setDeviceName(String) - Method in class com.ergotech.vib.servers.plc.PLCServer: Sets the name of the device server
setDigitalIn(int, DigitalIn) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setDigitalOut(int, DigitalOut) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setDirty(boolean) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Dirty tracking.
setDirty(boolean) - Method in class com.ergotech.vib.servers.plc.PLCServer: Dirty tracking.
setDisplayBytes(boolean) - Method in class com.ergotech.secs.gem.Log4JLogger: Passed through to the log4j logger.
setDisplayBytes(boolean) - Method in class com.ergotech.secs.Logger: Determines whether the logger will display byte data.
setDisplayBytes(boolean) - Method in interface com.ergotech.secs.LoggerInterface: This allows the logger to control the display of byte data.
setDisplayBytes(boolean) - Method in class com.ergotech.secs.NetLogger
setDisplayBytes(boolean) - Method in class com.ergotech.secs.SyslogLogger
setDisplayBytes(boolean) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Passed through to the log4j logger.
setDisplayBytes(boolean) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
setDisplayBytes(boolean) - Method in class com.ergotech.transsecs.secs.VIBLogger
setDisplayEvents(boolean) - Method in class com.ergotech.secs.gem.Log4JLogger: Passed through to the log4j logger.
setDisplayEvents(boolean) - Method in class com.ergotech.secs.Logger: This method will turn on the display of all events.
setDisplayEvents(boolean) - Method in interface com.ergotech.secs.LoggerInterface: This allows the logger to control the display of events.
setDisplayEvents(boolean) - Method in class com.ergotech.secs.NetLogger: This method will turn on the display of all events.
setDisplayEvents(boolean) - Method in class com.ergotech.secs.SyslogLogger: This method will turn on the display of all events.
setDisplayEvents(boolean) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Passed through to the log4j logger.
setDisplayEvents(boolean) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
setDisplayEvents(boolean) - Method in class com.ergotech.transsecs.secs.VIBLogger: This method will turn on the display of all events.
setDisplayMessages(boolean) - Method in class com.ergotech.secs.gem.Log4JLogger: Passed through to the log4j logger.
setDisplayMessages(boolean) - Method in class com.ergotech.secs.Logger: Determines whether the logger will display message data.
setDisplayMessages(boolean) - Method in interface com.ergotech.secs.LoggerInterface: This allows the logger to control the display of message data.
setDisplayMessages(boolean) - Method in class com.ergotech.secs.NetLogger
setDisplayMessages(boolean) - Method in class com.ergotech.secs.SyslogLogger
setDisplayMessages(boolean) - Method in class com.ergotech.transsecs.secs.Log4JLogger: Passed through to the log4j logger.
setDisplayMessages(boolean) - Method in class com.ergotech.transsecs.secs.MultiLogger: Passed through to all the loggers.
setDisplayMessages(boolean) - Method in class com.ergotech.transsecs.secs.VIBLogger
setDoubleValue(double) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the double value of the current value object.
setDoubleValue(int, double) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
setDoubleYColumns(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets how many double value columns to generate.
setDVIDs(List<SecsFormat>) - Method in class com.ergotech.secs.gem.GemCEID: Sets the collection of dvids associated with this CEID.
setECs(int, S2F15) - Static method in class com.ergotech.secs.Event
setElement(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the element.
setElementNames(String) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder
setElementNames(String) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Sets the outputs from the CSV string.
setElements(int) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets the number of elements to be generated for the ArrayValueObject
setEnableAllEvents(boolean) - Method in class com.ergotech.secs.gem.GemHostModel
setEnabled(boolean) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This will set our state to enabled or disabled (based on newValue).
setEnabled(boolean) - Method in class com.ergotech.secs.gem.GemALID: This is just a pass through to setALED, but the name is more user friendly.
setEnabled(boolean) - Method in class com.ergotech.secs.gem.GemCEID: Enables or disables the CEID.
setEnabled(boolean, boolean) - Method in class com.ergotech.secs.gem.GemCEID: Enables or disables the CEID.
setEnabled(ValueChangedEvent) - Method in class com.ergotech.secs.gem.GemSpoolHandler: This is the target of the called back for the EnableSpooling DVNAME.
setEnabled(boolean) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Enable spooling.
setEnabled(boolean) - Method in class com.ergotech.vib.manipulators.Emailer
setEndExpression(String) - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Sets the expected end of the response.
setEndRemove(int) - Method in class com.ergotech.vib.manipulators.string.StringTrimmer: Set the number of characters to remove from the end of the String.
setEndTime(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the end date for the WHERE in the SELECT.
setEquipmentControlFactoryClass(Class<? extends ECHandler>) - Method in class com.ergotech.secs.gem.GemEquipment: Set an instance of the EquipmentControlInterface as the factory class for equipment control.
setEquipmentHostName(String) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Set the equipment host name (pass through links only).
setEquipmentHostName(String) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: The host name of the equipment.
setEquipmentName(String) - Method in class com.ergotech.secs.gem.CommunicationsHandler
setEquipmentName(String) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: Set the name of the equipment.
setEquipmentName(String) - Method in class com.ergotech.secs.gem.GemHandler
setEquipmentName(String) - Method in class com.ergotech.secs.gem.OnlineHandler
setERRCODE(ERRCODE) - Method in class com.ergotech.secs.ERRPAIR
setError(Object) - Method in class com.ergotech.vib.ports.Port: Sets an error on the port.
setError(Object) - Method in interface com.ergotech.vib.ports.PortInterface: Sets an error on the port.
setERRTEXT(ERRTEXT) - Method in class com.ergotech.secs.ERRPAIR
setEvent(int) - Method in class com.ergotech.transsecs.secs.SecsEventFilter
setExportCriteria(int) - Method in class com.ergotech.vib.servers.SimpleDataSource
setExpression(String) - Method in class com.ergotech.vib.manipulators.string.StringSplitter: Set token delimiter list.
setFile(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Sets the file.
setFileExtension(String) - Method in class com.ergotech.transsecs.secs.FileRecipeManager: The file extension.
setFileName(String) - Method in class com.ergotech.transsecs.secs.FileRead: Sets the name of the file.
setFileName(String) - Method in class com.ergotech.vib.manipulators.UserFileReader: Set the name of the file tha contains the server strings.
setFileRecipeManagerExtension(String) - Method in class com.ergotech.transsecs.secs.TransSecsController
setFileRecipeManagerPath(String) - Method in class com.ergotech.transsecs.secs.TransSecsController
setFireLate(boolean) - Method in class com.ergotech.vib.manipulators.Constant
setFloatValue(float) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the float value of the current value object.
setFlowControl(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice
setFlowControl(int) - Method in class com.ergotech.vib.ports.SerialWrapper: The flow control for both input and output.
setFlowControl(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
setFlowControl(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
setFlowControl(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
setFNC(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Sets the FNC.
setForceReload(boolean) - Method in class com.ergotech.vib.manipulators.UserFileReader: Force a reload of the file if the parameter is "true".
setFormatInfo(String) - Method in class com.ergotech.vib.manipulators.datetime.DateInfo: This will set the format information that a SimpleDateFormatter will use.
setFormatter(String) - Method in class com.ergotech.vib.manipulators.DecimalFormatter: This will set the formatter String.
setFreqFactor(float) - Method in class com.ergotech.vib.servers.SineServer: Sets the frequency multiplier of the SineServer.
setFrom(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is the address to send we sent from.
setFunction(int) - Method in class com.ergotech.secs.S0F0: Sets the function number of this message.
setFunction(int) - Method in class com.ergotech.secs.SecsMsg: Sets the function number of this message.
setGemCompliant(boolean) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the gem compliance.
setGemCompliant(boolean) - Static method in class com.ergotech.transsecs.secs.VIBMessageBean
setGEMConnectors(List<List<ConnectorTransientRepresentation>>) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig
setGpioPinName(String) - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
setGpioPinName(String) - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
setGpioPinName(String) - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
setGroupSize(int) - Method in class com.ergotech.vib.manipulators.spc.SPC: sets a new group size
setGroupsURL(String) - Method in class com.ergotech.vib.manipulators.MixSecurityManager
setGUF(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The gap update factor.
setGWTLogger(LoggerInterface) - Static method in class com.ergotech.vib.servers.DataSource
setHandleAsHostMessage(boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean
setHandleHostMessageErrors(boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean
setHardSuspended(boolean) - Method in class com.ergotech.vib.servers.DataSource: This will force the server to suspend or resume.
setHcack(int) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Used in the generated code to set the variable.
setHeaderOffset(int) - Method in class com.ergotech.vib.servers.ppi.PPIServer
setHighestStationAddress(byte) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The address of this node.
setHighValue(int) - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
setHost(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is the SMTP Host name.
setHostMessageErrorLists(List<SecsFormat>) - Method in class com.ergotech.transsecs.secs.VIBMessageBean
setHostname(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Sets the hostname/ip address of the PLC.
setHostname(String) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Sets the hostname/ip address of the PLC.
setHostName(String) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setHostName(String) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
setHostname(String) - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Sets the hostname/ip address of the PLC.
setI(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new value for the integral parameter
setI2cAddress(String) - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
setI2cAddress(String) - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
setID(SecsFormat3x5x) - Method in class com.ergotech.secs.gem.GemID: Set the id of the object.
setId(int) - Method in class com.ergotech.secs.SecsEvent: This will set the id of the events source.
setIgnoreAllTimeouts(boolean) - Static method in class com.ergotech.secs.SecsMsg: Set to true to ignore timeouts.
setIgnoreTimeouts(boolean) - Method in class com.ergotech.secs.SecsMsg: Set to true to ignore timeouts.
setIncludeTimestamp(boolean) - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Sets the include timestamp flag
setIncrement(int) - Method in class com.ergotech.vib.servers.IncrementServer: Sets the increment of the server.
setIncrementAmount(long) - Method in class com.ergotech.vib.manipulators.Counter: This sets the int value to increment by.
setIncrementAmount(int) - Method in class com.ergotech.vib.manipulators.Counter
setIndex(int) - Method in class com.ergotech.vib.manipulators.array.ArrayElementFilter: Sets the array index.
setInitializerValue(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PopupInitializer: This method is called by the PopuHelper with a value object that is the string to use to initializer the popup.
setInitialLogger(LoggerInterface) - Static method in class com.ergotech.secs.HSMSSocketManager
setInitialQuality(int) - Method in class com.ergotech.vib.manipulators.Constant
setInitialStates(int, int) - Method in class com.ergotech.secs.gem.GemEquipment: Set initial states.
setInitialValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.array.ArraySplitter.SplitterDataSource: Called when the array is first split.
setInitialValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter.SplitterDataSource: Called when the array is first split.
setInitialValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PopupInitializer.ConnectableDataSource: In the connectable data source if the string value of the input is enclosed in {} then instead of sending the value to the server the data source will strip the {} and make a connection to the server that is reference by the string remaining.
setInitialziationMessage(SecsMsg) - Method in class com.ergotech.secs.gem.TraceServer: Set the message that created us.
setInputRegister(int, InputRegister) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setInputStream(InputStream) - Method in class com.ergotech.vib.ports.Port: The input stream associated with this port.
setInScript(String) - Method in class com.ergotech.vib.servers.DataSource: Adds some imports to the script.
setIntegerOnly(boolean) - Method in class com.ergotech.vib.servers.RandomData: Sets whether or not to generate only integer outputs.
setIntegerOutput(boolean) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets whether or not to generate only non-decimal numbers in the array.
setInterCharacterTimeout(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: The inter-character timeout.
setInterCharacterTimeout(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: The inter-character timeout.
setIntValue(int) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the int value of the current value object.
setIntValue(int, int) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
setIntYColumns(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets how many int value columns to generate.
setIsEquipment(boolean) - Method in class com.ergotech.secs.SecsIConnectionManager: Sets whether this instance is the equipment or the host.
setIsHost(boolean) - Method in class com.ergotech.secs.SecsIWrapper: Controls whether this connection is host or equipment.
setIsHost(boolean) - Method in class com.ergotech.secs.SessionManager: Sets whether this session manager is capable of sending host (primary) messages.
setIsLastBlock(boolean) - Method in class com.ergotech.secs.SecsMsg
setJanIsOne(boolean) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator
setJustification(int) - Method in class com.ergotech.secs.SecsFormat20: Sets the justification of the formatted string.
setKey(String) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
setLabel(String) - Method in class com.ergotech.vib.servers.MarqueeServer: This will update (change) the string being displayed as a marquee output.
setLastAccessTime(long) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer.PPITarget
setLastConnector(Connector) - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent
setLastMessageSent(SecsFormat) - Method in class com.ergotech.secs.gem.GemCEID: Sets the last event message that was sent with this CEID.
setLastSplitString(String) - Method in class com.ergotech.vib.manipulators.array.StringToArray
setLength(int) - Method in class com.ergotech.secs.SecsDataStructure
setLength(int) - Method in interface com.ergotech.secs.SecsFormat: Sets the length of the format.
setLength(int) - Method in class com.ergotech.secs.SecsFormat00: Requests that the length of the list be set to the provided length.
setLength(int) - Method in class com.ergotech.secs.SecsFormat10
setLength(int) - Method in class com.ergotech.secs.SecsFormat11: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat20
setLength(int) - Method in class com.ergotech.secs.SecsFormat22
setLength(int) - Method in class com.ergotech.secs.SecsFormat30: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat31: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat32: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat34: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat40: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat44: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat50: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat51: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat52: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.secs.SecsFormat54: Sets the length of format to the new value.
setLength(int) - Method in class com.ergotech.transsecs.secs.SecsFormat99
setLength(int) - Method in class com.ergotech.vib.servers.fins.FinsServer: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.fins.FinsString: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.melsec.MelsecString: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.modbus.ModbusString: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.modbus.ModbusStringArray: sets the number of bytes that need to be read to satisfy this server.
setLength(int) - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Sets the length of the data.
setLength(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns the number of bytes that need to be read to satisfy this server.
setLevel(int) - Method in class com.ergotech.secs.SecsEvent
setLevel(float) - Method in class com.ergotech.vib.servers.FloatFluxServer: Sets the target level of the server.
setLimitId(LIMITID) - Method in class com.ergotech.secs.gem.GemLIMITID: Sets the limit id.
setLimitMax(double) - Method in class com.ergotech.secs.gem.GemECID: Returns the Maximum acceptable value for a limit.
setLimitMax(double) - Method in class com.ergotech.secs.gem.GemVID: Returns the Maximum acceptable value for a limit.
setLimitMin(double) - Method in class com.ergotech.secs.gem.GemECID: Sets the minimum acceptable value for a limit.
setLimitMin(double) - Method in class com.ergotech.secs.gem.GemVID: Sets the minimum acceptable value for a limit.
setLimitToUndefined(GemVID, int) - Method in class com.ergotech.secs.gem.GemHandler: This will set a limit to undefined.
setLinkTestInterval(double) - Method in class com.ergotech.secs.HSMSWrapper: This value controls how often LinkTest messages are sent.
setLinkTestInterval(double) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets a new link test interval for all HSMS connections
setLinkTimeout(double) - Method in class com.ergotech.vib.ports.PortDeviceServer: Sets the link timeout in seconds.
setLocal(boolean) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: If we are online, this will change to local mode.
setLocal(boolean) - Method in class com.ergotech.secs.gem.GemHandler: If we are online, this will change to local mode.
setLocal() - Method in class com.ergotech.secs.gem.OnlineHandler: This will change to local state.
setLocal(boolean) - Method in class com.ergotech.secs.gem.OnlineHandler: This will change to local or remote (true or false);
setLocalDebug(int) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the local debug level.
setLocale(Locale) - Method in class com.ergotech.vib.valueobjects.ValueObject: Sets the locale.
setLogger(LoggerInterface) - Method in class com.ergotech.secs.HSMSPassiveWrapper
setLogger(LoggerInterface) - Method in class com.ergotech.secs.HSMSSocketListener: Set the logger for this connection.
setLogger(LoggerInterface) - Method in class com.ergotech.secs.HSMSWrapper: Sets the logger for the current connection.
setLogger(LoggerInterface) - Method in class com.ergotech.secs.PortManager: Register a logger.
setLogger(LoggerInterface) - Method in class com.ergotech.secs.SecsIWrapper: Sets the logger for the current connection.
setLogger(LoggerInterface) - Method in class com.ergotech.secs.SessionManager: Register a logger.
setLogger(LoggerInterface) - Method in interface com.ergotech.secs.WrapperInterface: Sets the logger for the current connection.
setLogger(LoggerInterface) - Method in class com.ergotech.transsecs.secs.TransSecsController
setLogger(LoggerInterface) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setLogixTagName(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Sets the PLC address.
setLongValue(long) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the long value of the current value object.
setLowerDB(double) - Method in class com.ergotech.secs.gem.GemLIMITID: Sets the lower DB.
setLowValue(int) - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
setLSL(double) - Method in class com.ergotech.vib.manipulators.spc.SPC: sets a new lower specification limit
setM(float) - Method in class com.ergotech.vib.manipulators.Scaler
setMailAsAttachment(boolean) - Method in class com.ergotech.vib.manipulators.Emailer
setMainExpression(String) - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Sets the expected response.
setManualCommand(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new value for the manual command
setMarkerChar(String) - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Set the marker character.
setMax(int) - Method in class com.ergotech.vib.servers.RandomData: Sets the maximum value of the data source.
setMaxAge(String) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
setMaxAmp(int) - Method in class com.ergotech.vib.servers.SineServer: Sets the amplitude of the server.
setMaxFluctuation(float) - Method in class com.ergotech.vib.servers.FloatFluxServer: Sets the current maximum fluctuation level of the server.
setMaximum(long) - Method in class com.ergotech.vib.manipulators.Counter: This sets the minimum (and clear value if the counter is incrementing).
setMaximum(int) - Method in class com.ergotech.vib.manipulators.Counter
setMaximumBlockOffset(int) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Sets the message offset.
setMaximumBlockSize(int) - Method in class com.ergotech.secs.SecsISessionManager: Sets the maximum block size.
setMaximumBlockSize(int) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Set the maximum allowable block size in bytes.
setMaximumCoilAddress(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Sets the maximum coil address that this simulator will respond to.
setMaximumRegisterAddress(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Sets the maximum register address that this simulator will respond to.
setMaximumSocketConnections(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
setMaximumSocketConnections(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
setMaximumSocketConnections(int) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer
setMaximumSocketConnections(int) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer
setMaximumSocketConnections(int) - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer
setMaxNumValues(int) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
setMaxPorts(int) - Method in class com.ergotech.vib.ports.PortPool: Sets the maximum number of ports that we will open to communicate with the device.
setMaxPorts(int) - Method in interface com.ergotech.vib.ports.PortPoolInterface: Sets the maximum number of ports that the port pool will serve.
setMaxPorts(int) - Method in class com.ergotech.vib.ports.TCPPassivePortFactory.PassivePortPool: This is ignored.
setMaxQueueSize(int) - Method in class com.ergotech.vib.manipulators.PassOnThread: Set the maximum queue size.
setMaxTimebase(String) - Method in class com.ergotech.vib.manipulators.array.HistoricalTimebaseBridger
setMaxTimebase(String) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder
setMaxUnitId(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setMaxValue(double) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets the maximum for the random number generator
setMaxValue(int) - Method in class com.ergotech.vib.servers.IncrementServer: Sets the maximum of the server.
setMessage(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is a string thats added to each email message.
setMessageHandlers(Vector<Object>) - Method in class com.ergotech.secs.SessionManager: Replaces all the current message handle objects with those contained in the vector.
setMessageId(short) - Method in class com.ergotech.secs.SecsMsg: Sets the message ID.
setMessageName(String) - Method in class com.ergotech.transsecs.secs.MessageBean
setMin(int) - Method in class com.ergotech.vib.servers.RandomData: Sets the minimum value of the data source.
setMinimum(long) - Method in class com.ergotech.vib.manipulators.Counter: This sets the minimum (and clear value if the counter is incrementing).
setMinimum(int) - Method in class com.ergotech.vib.manipulators.Counter
setMinPulseTime(long) - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
setMinValue(double) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets the minimum for the random number generator
setMinValue(int) - Method in class com.ergotech.vib.servers.IncrementServer: Sets the minimum value.
setMode(int) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
setMultiplier(long) - Method in class com.ergotech.vib.manipulators.datetime.DateToLong: This allows the user to compensate for dates that do not start at Jan1 1970.
setMultiplier(long) - Method in class com.ergotech.vib.manipulators.datetime.LongToDate: This allows the user to compensate for dates that do not start at Jan1 1970.
setName(String) - Method in class com.ergotech.secs.gem.GemID: Set the name of the object.
setName(String) - Method in class com.ergotech.secs.SecsEvent: This will set the name of the event.
setName(String) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Set the name of this component.
setName(String) - Method in class com.ergotech.vib.ports.PortDeviceServer: The name of the device.
setName(String) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: The name of the device.
setName(String) - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: If the name is changed we need to update the list of device servers.
setName(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: This method will change the name that is associated with this server.
setNetworkNumber(byte) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Set the network number.
setNodeAddress(byte) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: The address of this node.
setNodeAddress(byte) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: The address of this node.
setNullTerminated(boolean) - Method in class com.ergotech.vib.servers.ppi.S7: For Siemens string the first two bytes of the string indicate respectively: - First Byte: Max Length of the string (In our case 48) - Second Byte: Actual length of the string (In our case 5) Set this variable to true to use Null Terminated strings rather than Siemens Strings.
setNumberOfElements(int) - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: Sets the Number Of Elements in the array.
setNumberOfGroups(int) - Method in class com.ergotech.vib.manipulators.spc.SPC: sets a new value for the number of containers
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsDataStructure: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in interface com.ergotech.secs.SecsFormat: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat00: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat10: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat11: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat20: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat22: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat30: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat31: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat32: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat34: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat40: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat44: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat50: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat51: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat52: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.secs.SecsFormat54: Sets the number of length bytes to send when the format is encoded.
setNumberOfLengthBytes(int) - Method in class com.ergotech.transsecs.secs.SecsFormat99
setOffset(long) - Method in class com.ergotech.vib.manipulators.datetime.DateToLong: This allows the user to compensate for dates that do not start at Jan1 1970.
setOffset(long) - Method in class com.ergotech.vib.manipulators.datetime.LongToDate: This allows the user to compensate for dates that do not start at Jan1 1970.
setOffset(int) - Method in class com.ergotech.vib.servers.plc.PLCDataBlock: Sets the offset.
setOffset(int) - Method in class com.ergotech.vib.servers.SineServer: Sets the amplitude offset of the server.
setOnline(boolean) - Method in class com.ergotech.secs.gem.OnlineHandler: This will set the system online or equipment offline.
setOnlineHandler(OnlineHandler) - Method in class com.ergotech.secs.gem.GemHandler: Set the object that will handle online/offline requests.
setOnlineHandlerFactoryClass(Class<? extends OnlineHandler>) - Method in class com.ergotech.secs.gem.GemEquipment: Set a subclass of the OnlineHandler as the factory class for online/offline control.
setOnlyLetters(boolean) - Method in class com.ergotech.vib.servers.RandomStringServer: Sets whether or not to only use Letters
setOPCHostName(String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
setOPCServerName(String) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
setOPCTimebase(double) - Method in class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
setOptimizeReads(boolean) - Method in class com.ergotech.vib.servers.plc.PLCServer: Optimize the reading of registers.
setOption(String) - Method in class com.ergotech.vib.servers.MarqueeServer: This method is called for every single entry in the parameter list.
setOptionalLimit(int) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set limit for the select.
setOrderBy(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the String for the ORDER BY
setOutMax(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl
setOutMin(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl
setOutputStream(OutputStream) - Method in class com.ergotech.vib.ports.Port: The output stream associated with this port.
setP(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new value for the proportional parameter
setPad(boolean) - Method in class com.ergotech.vib.manipulators.ConvertToHex: sets the flag whether or not to pad small numbers (numbers less than 0x10) with a zero.
setParameters(Object, String) - Static method in class com.ergotech.vib.utils.Utils: This will take a parsable string, and convert it to a hashtable using the Utils convertString method.
setParameters(Object, Map<String, Object>) - Static method in class com.ergotech.vib.utils.Utils: Sets the parameters to an Object.
setParent(OutPortConnectionInterface) - Method in class com.ergotech.vib.servers.DataSource
setParity(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the parity.
setParity(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the parity.
setParity(int) - Method in class com.ergotech.vib.ports.SerialWrapper: This is the parity.
setParity(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
setParity(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
setParity(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
setPassiveT1(double) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T1 for a passive link.
setPassiveT1(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT2(double) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T2 for a passive link.
setPassiveT2(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT3(double) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T3 for a passive link.
setPassiveT3(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT4(double) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T4 for a passive link.
setPassiveT4(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT5(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T5 for a passive link.
setPassiveT5(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT6(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T6 for a passive link.
setPassiveT6(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT7(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T7 for a passive link.
setPassiveT7(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveT8(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets T8 for a passive link.
setPassiveT8(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setPassiveToolTarget(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the tool that will be the target.
setPassword(String) - Method in class com.ergotech.vib.manipulators.Emailer
setPCAddres(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Set the PC Address.
setPcNumber(byte) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: The pc number.
setPeepOnly(boolean) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: To take a look at the data in a message and then pass it on to the host without handling it set snoop only.
setPersistenceFileName(String) - Method in class com.ergotech.secs.gem.GemEquipment
setPersistenceFileName(String) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets the filename to used for persistence.
setPersistenceFileName(String) - Method in class com.ergotech.transsecs.secs.TransSecsController: Set the file name for GEM persistance.
setPersistenceInterface(PersistenceInterface) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Set the persistance config.
setPinPullUp(boolean) - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
setPlainText(boolean) - Method in class com.ergotech.vib.manipulators.MixSecurityManager
setPLCPrivateAddress(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: The PLC private IP address or hostname.
setPLCPrivateAddress(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: The PLC private IP address or hostname.
setPLCPrivateAddress(String) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: The PLC private IP address or hostname.
setPLCStationNumber(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the plcStationNumber.
setPopupLogger(LoggerInterface) - Static method in class com.ergotech.vib.servers.DataSource
setPort(int) - Method in class com.ergotech.secs.HSMSSocketManager: Sets the port for the server to listen on.
setPort(int) - Method in class com.ergotech.secs.HSMSWrapper: Set the TCP/IP port to listen/connect on.
setPort(int) - Method in class com.ergotech.secs.PortManager: sets the port.
setPort(int) - Method in class com.ergotech.secs.SecsIWrapper: Set the serial port to listen on.
setPort(int) - Method in class com.ergotech.secs.SerialPortManager: Sets the port number of the server.
setPort(int) - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Sets the passive port.
setPort(int) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the port that this object will use to listen for active connections.
setPort(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Sets the port that this object will use to listen for active connections.
setPort(int) - Method in class com.ergotech.vib.manipulators.Emailer: Sets the port for the SMTP server.
setPort(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the port number.
setPort(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the port number.
setPort(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Sets the port to listen on.
setPort(int) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer: Sets the serial port number of the PLC.
setPortManager(PortManager) - Method in class com.ergotech.secs.ConnectionManager: sets the port manager
setPortManager(PortManager) - Method in class com.ergotech.secs.HSMSWrapper: Sets the port manager for the wrapper.
setPortManager(PortManager) - Method in class com.ergotech.secs.SecsIWrapper: Sets the port manager for the wrapper.
setPortManager(PortManager) - Method in interface com.ergotech.secs.WrapperInterface: Sets the port manager for the wrapper.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Sets the port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Sets the serial port number of the PLC.
setPortNumber(int) - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Sets the port number of the PLC.
setPortPool(PortPoolInterface) - Method in class com.ergotech.vib.ports.Port: Sets the port pool that this port was served from.
setPortPool(PortPoolInterface) - Method in interface com.ergotech.vib.ports.PortInterface: Sets the port pool that this port was served from.
setPortPool(PortPoolInterface) - Method in class com.ergotech.vib.ports.SerialWrapper: Opens and closes the port based on the value passed.
setPostString(String) - Method in class com.ergotech.vib.manipulators.string.CodeToString: Set the value for the string that will be postpended to all output.
setPrefix(String) - Method in class com.ergotech.vib.manipulators.ConvertToHex: sets the String to be displayed before the hex conversion.
setPreString(String) - Method in class com.ergotech.vib.manipulators.string.CodeToString: Set the value for the string that will be prepended to all output.
setPrimaryMessage(SecsMsg) - Method in class com.ergotech.secs.SecsMsg: This method will set the original message.
setProperty(String, SecsFormat, ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemID: Find the DVNAME of the name and set the name and the value as a property to the provided value object.
setProperty(String, Object) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is additional information that is sent with the property.
setProperty(String, Object) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This is additional information that is sent with the property.
setPullFromServers(String) - Method in class com.ergotech.vib.servers.SimpleDataSource
setPushData(SimpleDataSource.NameEditorData) - Method in class com.ergotech.vib.servers.SimpleDataSource: Set the tag name for the server we will push to.
setPushName(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: Set the tag name for the server we will push to.
setPushToServers(String) - Method in class com.ergotech.vib.servers.SimpleDataSource: Set the tag name for the server we will push to.
setPwmType(String) - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
setQuality(int) - Method in class com.ergotech.vib.manipulators.PropertyFilter: Set the quality value for all out-going value objects.
setQuality(int) - Method in exception com.ergotech.vib.servers.plc.PLCException: Sets the quality of the data.
setQuality(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Changing the quality of the array will change the quality of the components in the array such that all values are at least as bad as the array.
setQuality(int) - Method in class com.ergotech.vib.valueobjects.ValueObject: This is the quality of the reading.
setQuality(int) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will set the quality of the reading.
setRandomX(boolean) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: sets whether or not to use random (the default) or seqencial X values.
setRate(float) - Method in class com.ergotech.vib.servers.FloatFluxServer: Sets the Rate of change for the server.
setRCPPARNM(RCPPARNM) - Method in class com.ergotech.secs.RCPPAIR
setRCPPARVAL(RCPPARVAL) - Method in class com.ergotech.secs.RCPPAIR
setReadAsBinary(boolean) - Method in class com.ergotech.vib.manipulators.URLReader: Set to true to read data from the URL as binary.
setReg(String) - Method in class com.ergotech.vib.servers.modbus.Modbus0XServer: Sets the registerNumber of the server.
setReg(String) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Sets the registerNumber of the server.
setReg(String) - Method in class com.ergotech.vib.servers.plc.PLCArray: Set the starting register for this array.
setReg(String) - Method in class com.ergotech.vib.servers.ppi.PPIServer: Sets the register address in the PLC.
setRegister(int, Register) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setRegister(String) - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
setRegister(String) - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
setRegisterCount(int) - Method in class com.ergotech.vib.servers.plc.PLCArray: Set the number of registers to use.
setRegisterType(int) - Method in class com.ergotech.vib.servers.modbus.ModbusArray: Set the type of the register for this array.
setRegisterType(int) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Set the register type for this server.
setRegNotifyMax(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setRegNotifyMax(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setRegNotifyMin(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setRegNotifyMin(int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setRemote() - Method in class com.ergotech.secs.gem.OnlineHandler: This will change to remote state.
setReplaceString(String) - Method in class com.ergotech.vib.manipulators.string.TokenReplace: Set the String to replace the tokens.
setReplyBit(boolean) - Method in class com.ergotech.secs.SecsMsg: Controls the setting of the reply bit.
setReportGroupSize(int) - Method in class com.ergotech.secs.gem.TraceServer: The number of samples to take before a report is sent.
setReportWriter(ReportWriter) - Method in class com.ergotech.secs.gem.GemCEID: Sets the component that will act as a report writer for this component.
setResourceName(String) - Method in class com.ergotech.vib.manipulators.string.CodeToString: Sets the resource file applicationName and the resource is opened.
setResponse(String, VIBMessageBean) - Static method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the response message by string
setResponse(PPIDataBlock) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the timestamp.
setResponseMessage(SecsMsg) - Method in class com.ergotech.secs.SecsMsg: This method will set the response message.
setResponseTimeout(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: The response timeout.
setResponseTimeout(int) - Method in class com.ergotech.vib.ports.PortDeviceServer: Sets the response timeout for this connection.
setResponseTimeout(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: The response timeout.
setRetryCount(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setRetryCount(int) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
setRetryCount(int) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setRetryCount(int) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer
setRetryCount(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: The retry count.
setRetryInterval(double) - Method in class com.ergotech.secs.HSMSActiveWrapper: The time, in seconds, between attempts to establish a connection.
setRetryLimit(int) - Method in class com.ergotech.secs.SecsIConnectionManager
setRetryLimit(int) - Method in class com.ergotech.secs.SecsIWrapper: Sets the retry limit.
setRows(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the number of rows to be generated.
setRptidSecsFormat(int) - Method in class com.ergotech.secs.gem.GemHostModel
setS1F3ReturnsValues(boolean) - Static method in class com.ergotech.secs.gem.GemHandler: Set to true if the S1F3 method should return the values when a blank list is passed to the method rather than the IDs.
setS1F3ReturnsValues(boolean) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Set to true if the S1F3 method should return the values when a blank list is passed to the method rather than the IDs.
setScreenLocal(boolean) - Method in class com.ergotech.vib.servers.SimpleDataSource: This flag hints that this bean should be generated such that it is connected only to the particular screen and that changes made to it will remain local to that screen.
setScript(String) - Method in class com.ergotech.vib.servers.DataSource: Adds some imports to the script.
SetSecsError(SecsException) - Method in class com.ergotech.secs.SecsMsg: Sets the current error.
SetSecsError(String, int) - Method in class com.ergotech.secs.SecsMsg: Sets the current error and creates a SecsException from the provided information.
setSecsMsg(SecsMsg) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Sets the raw secs message associated with this object.
setSelectColumnList(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the comma separated column list or "*" for the SELECT
setSelectResponse(byte) - Method in class com.ergotech.secs.HSMSSessionManager: Sets the default response to a select.
setSendColors(boolean) - Method in class com.ergotech.vib.manipulators.ByteSplitter: Need to change setColors on all bitOutputs[]
setSendColors(boolean) - Method in class com.ergotech.vib.servers.DataSource: This sets whether the system will send the color with a value change if the new value is in a hihi, hi, lo, or lolo state.
setSendDate(boolean) - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the date.
setSendOnlyChangedValuesDefault(boolean) - Method in class com.ergotech.vib.servers.DataSource
setSendOnPropertyChange(boolean) - Method in class com.ergotech.vib.manipulators.PropertyFilter: Set whether or not to send a new ValueObject every time the quality, color, or timestamp of the data is changed.
setSendProperties(boolean) - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the values properties.
setSendTag(boolean) - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the tag name.
setSendValue(boolean) - Method in class com.ergotech.vib.manipulators.Emailer: This is if we should send the values.
setSerialPortParameters() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Sets the SerialPort parameters.
setSerialPortParameters() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: Sets the SerialPort parameters.
setSerialPortParameters() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Sets the SerialPort parameters.
setSerialPortParameters() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Sets the SerialPort parameters.
setServerListData(SimpleDataSource.NameEditorData) - Method in class com.ergotech.vib.servers.SimpleDataSource: Set the tag name for the server we will push to.
setServers(SimpleDataSource[]) - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Adds all the servers to the server container.
setSessionId(int) - Method in class com.ergotech.secs.HSMSSessionManager: Sets the session ID for this session manager.
setSessionManager(SessionManager) - Method in class com.ergotech.secs.Event
setSessionManager(SessionManager) - Method in class com.ergotech.secs.SecsMsg: Sets the session manager.
setSetCEID(GemCEID) - Method in class com.ergotech.secs.gem.GemALID: Sets the CEID to send when the alarm is set.
setSetValue(String) - Method in class com.ergotech.vib.manipulators.SetValue: This will set the valueobject that we will send when we receive a ValueChangedEvent.
setShortValue(short) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the short value of the current value object.
setShouldSendMultiBlockRequests(int) - Static method in class com.ergotech.secs.SecsMsg: Set the shouldSendMultiBlockRequests variable.
setSigned(boolean) - Method in class com.ergotech.vib.servers.plc.PLCServer: Values will be signed if this is true.
setSimulationFlag(boolean) - Method in class com.ergotech.secs.HSMSSocketListener: Sets the state of the simulation flag.
setSimulationFlag(boolean) - Method in class com.ergotech.secs.SessionManager: Sets the state of the simulation flag.
setSimulationFlag(boolean) - Method in class com.ergotech.vib.manipulators.Constant: This is ignored.
setSimulationFlag(boolean) - Method in class com.ergotech.vib.ports.PortDeviceServer
setSimulationFlag(boolean) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase
setSingleSession(boolean) - Method in interface com.ergotech.secs.ConnectionManagerInterface
setSingleSession(boolean) - Method in class com.ergotech.secs.HSMSConnectionManager: Sets the nature of the session, single or not single.
setSize(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixArrayServer
setSLOTIDArray(SLOTID[]) - Method in class com.ergotech.secs.CarrierSlotData
setSoftRevAndMDLN() - Method in class com.ergotech.transsecs.secs.TransSecsController: Allows subclasses to set parameters for S1F14 and S1F2.
setSoundFile(String) - Method in class com.ergotech.vib.manipulators.SoundClipPlayer
setSource(Object) - Method in class com.ergotech.secs.SecsEvent: This will set the TagAgent of the events source.
setSourceNetworkAddress(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setSourceNodeNumber(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setSourcePort(int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setSP(double) - Method in class com.ergotech.vib.manipulators.spc.PidControl: sets a new value for the set point
setSpacing(double) - Method in class com.ergotech.secs.LinkTest: Sets the spacing, this will also start the messages sending if necessary.
setSpeed(int) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
setStartExpression(String) - Method in class com.ergotech.vib.manipulators.string.RegularExpression: Sets the expected start of the response.
setStartLevel(float) - Method in class com.ergotech.vib.servers.FloatFluxServer: Sets the start-up level of the server.
setStartReg(String) - Method in class com.ergotech.vib.servers.plc.PLCArray: Set the starting register for this array.
setStartRemove(int) - Method in class com.ergotech.vib.manipulators.string.StringTrimmer: Set the number of characters to remove from the start.
setStartTime(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the start date for the WHERE in the SELECT.
setStarttls(boolean) - Method in class com.ergotech.vib.manipulators.Emailer
setStartUpHigh(boolean) - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
setStartUpHigh(boolean) - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
setStartValue(long) - Method in class com.ergotech.vib.manipulators.Counter: This sets the current value immediately.
setStartValue(int) - Method in class com.ergotech.vib.manipulators.Counter
setStartWithLetter(boolean) - Method in class com.ergotech.vib.servers.RandomStringServer: Sets whether or not to start the output with a Letter.
setState(int) - Method in class com.ergotech.secs.gem.GemLIMITID: Sets the current state of the limit.
setStationAddress(int) - Method in class com.ergotech.vib.servers.plc.PLCArray: Sets the station address for the target.
setStationAddress(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: The destination address for this server.
setStatus(int) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the status.
setStopBits(int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This is the stop bits.
setStopBits(int) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the stop bits.
setStopBits(int) - Method in class com.ergotech.vib.ports.SerialWrapper: This is the stop bits.
setStopBits(int) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer
setStopBits(int) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer
setStopBits(int) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer
setStream(int) - Method in class com.ergotech.secs.S0F0: Sets the stream number of this message.
setStream(int) - Method in class com.ergotech.secs.SecsMsg: Sets the stream number of this message.
setStringLength(int) - Method in class com.ergotech.vib.servers.RandomStringServer: sets the number of characters in the output String
setStringValue(String) - Method in class com.ergotech.vib.manipulators.Manipulator: Sets the string value of the current value object.
setStringValue(int, String) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
setStringYColumns(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets how many String value columns to generate.
setStyle(String) - Method in class com.ergotech.vib.servers.TimeServer: The date format.
setSubElement(int) - Method in class com.ergotech.vib.servers.ab.DF1DataBlock: Returns the element.
setSubId(int) - Method in class com.ergotech.secs.SecsEvent: This is the subId.
setSubject(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is the subject line to send.
setSupervisors(String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
setSuspendedInternal(boolean) - Method in class com.ergotech.vib.servers.MarqueeServer: This will be called after all the parameters are set.
setSvids(SecsFormat00) - Method in class com.ergotech.secs.gem.TraceServer: Sets the list of SVIDs.
setSVName(String) - Method in class com.ergotech.secs.gem.GemVID: This is used for S1F12 only.
setSwapStyle(int) - Method in class com.ergotech.vib.servers.modbus.ModbusArray: This sets the 32 bit swap style.
setSwapStyle(int) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: This sets the 32 bit swap style.
setSwapStyle(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: This sets the 32 bit swap style.
setSyncWriteTimeout(int) - Method in class com.ergotech.vib.servers.DataSource: sets the syncWriteTimeout via mySyncWriteTimeout
setSystemBytes(int) - Method in class com.ergotech.secs.SecsMsg: Sets the system bytes.
setT1(double) - Method in class com.ergotech.secs.SecsIConnectionManager
setT1(double) - Method in class com.ergotech.secs.SecsIWrapper: Sets the T1 timeout value.
setT1(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT1(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT1_IntercharacterTimeout(double) - Method in class com.ergotech.secs.SecsIConnectionManager: Sets the Intercharacter Timeout as defined by the Semi SECSI specification.
setT2(double) - Method in class com.ergotech.secs.SecsIConnectionManager
setT2(double) - Method in class com.ergotech.secs.SecsIWrapper: Sets the T2 timeout value.
setT2(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT2(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT2_ProtocolTimeout(double) - Method in class com.ergotech.secs.SecsIConnectionManager: Sets the Protocol Timeout as defined by the Semi SECSI specification.
setT3(double) - Method in class com.ergotech.secs.HSMSWrapper
setT3(double) - Method in class com.ergotech.secs.SecsIWrapper: Sets the T3 timeout value.
setT3(double) - Method in interface com.ergotech.secs.WrapperInterface: Sets the reply timeout.
setT3(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT3(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT4(double) - Method in class com.ergotech.secs.SecsIConnectionManager
setT4(double) - Method in class com.ergotech.secs.SecsIWrapper: Sets the T4 timeout value.
setT4(double) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT4(double) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT4_InterblockTimeout(double) - Method in class com.ergotech.secs.SecsIConnectionManager: Sets the Interblock Timeout as defined by the Semi SECSI specification.
setT5(int) - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T5 timeout.
setT5(int) - Method in class com.ergotech.secs.HSMSWrapper
setT5(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT5(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT6(int) - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T6 timeout.
setT6(int) - Method in class com.ergotech.secs.HSMSWrapper
setT6(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT6(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT7(int) - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T7 timeout.
setT7(int) - Method in class com.ergotech.secs.HSMSWrapper
setT7(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT7(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setT8(double) - Method in class com.ergotech.secs.HSMSConnectionManager: This is the T8 timeout.
setT8(int) - Method in class com.ergotech.secs.HSMSWrapper
setT8(int) - Method in class com.ergotech.transsecs.secs.TransSecsController
setT8(int) - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
setTableName(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Set the tableName
setTemplate(String) - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Set the template String.
setThread(Thread) - Method in class com.ergotech.vib.ports.Port: Set the thread that owns this port.
setThread(Thread) - Method in interface com.ergotech.vib.ports.PortInterface: The thread that currently owns the port.
setThreadingModel(int) - Static method in class com.ergotech.secs.SessionManager: Set the threading model.
setTimebase(double) - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: This method will change the amount of time between timeout checks.
setTimebase() - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: This method will change the amount of time between timeout checks.
setTimebase(double) - Method in class com.ergotech.vib.manipulators.Blinker: This is subclassed to make sure we use we don't use a normal timer...
setTimebase(double) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: This method does nothing now.
setTimebase(double) - Method in class com.ergotech.vib.ports.PortDeviceServer: Sets the timebase.
setTimebase(double) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: Sets the timebase of the server in seconds.
setTimebase(double) - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Sets the timebase.
setTimebase(double) - Method in class com.ergotech.vib.servers.plc.PLCArray: Override this since we do not have a timebase, but need to pass it to our servers.
setTimebase(double) - Method in class com.ergotech.vib.servers.plc.PLCServer: Sets the timebase of the server.
setTimebase(double) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: Sets the timebase.
setTimebase(double) - Method in class com.ergotech.vib.servers.SimpleDataSource: Sets the timebase of the server in seconds.
setTimeColumnName(String) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Sets the "HAS_TIME" property of the value object.
setTimeDelay(double) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: Sets a new timeDelay factor.
setTimedPopupLogger(LoggerInterface) - Static method in class com.ergotech.vib.servers.DataSource
setTimeInterval(double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the time interval for the x column data.
setTimeMillis(long) - Method in class com.ergotech.vib.valueobjects.ValueObject: This will set the time as the number of milliseconds since Jan 1st 1970.
setTimeMillis(long) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: This will set the time as the number of milliseconds since Jan 1st 1970.
setTimeOffset(long) - Method in class com.ergotech.vib.manipulators.PropertyFilter: Set the timeOffset (in millseconds) for all out-going value objects.
setTimeOffset(float) - Method in class com.ergotech.vib.servers.SineServer: Sets the time offset of the SineServer (in seconds).
setTimeout(int) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
setTimeSpacing(double) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets the time interval for the timestamp of the data generated.
setTimeStamp(Date) - Method in class com.ergotech.secs.SecsMsg: Sets the timestamp for the current message, usually called by the port manager when the message is sent or received.
setTimestamp(long) - Method in class com.ergotech.vib.servers.ppi.PPIDataBlock: Returns the timestamp.
setTimestampColumn(String) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Sets the timestamp column name.
setTimestampDateFormat(String) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder
setTimestampFormat(String) - Method in class com.ergotech.vib.manipulators.array.ArrayToString: Sets the timestamp format
setTimestampKey(String) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder
setTimeZone(String) - Method in class com.ergotech.vib.servers.TimeServer: This sets the time zone based on a string.
setTo(String) - Method in class com.ergotech.vib.manipulators.Emailer: This is the address to send to.
setToken(String) - Method in class com.ergotech.vib.manipulators.string.TokenReplace: Set the token (a series of Characters) in the input to be replaced.
setToolName(String) - Method in class com.ergotech.transsecs.secs.MessageBean
setTotalSamples(int) - Method in class com.ergotech.secs.gem.TraceServer: The total number of samples to take.
setTrace(boolean) - Method in class com.ergotech.vib.servers.SimpleDataSource: Sets the trace flag.
setTraceLogger(LoggerInterface) - Static method in class com.ergotech.vib.servers.DataSource
setTriggerEdge(int) - Method in class com.ergotech.transsecs.secs.VIBMessageBean: The edge that will trigger the message to be sent.
setTriggerOnThread(boolean) - Method in class com.ergotech.vib.servers.plc.PLCServer
setTrueString(String) - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This sets the comma separated list of all the possible strings that represent true.
setTsapDst(int) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setTsapDstRef(String) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setTsapSourceReference(int) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setTsapSrc(int) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setTsapSrcRef(String) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer
setTTL(int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Set the TTLs of all the value objects in the array.
setTTL(int) - Method in class com.ergotech.vib.valueobjects.ValueObject
setTTL(int) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface
setType(int) - Method in class com.ergotech.vib.manipulators.Constant
setType(char) - Method in class com.ergotech.vib.valueobjects.ValueObject: This allows people to specify what type a specific subclass represents.
setType(char) - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: sets the type that the was used to create the valueObject.
setUnconvertedMsg(byte[]) - Method in class com.ergotech.secs.SecsMsg: Sets the the raw, unconverted msg into the new message but it will not unconvert or interpret the information.
setUnicodeOffset(int) - Method in class com.ergotech.vib.manipulators.string.StringSplitter: Set the arbitrary int unicode offset.
setUnitId(int) - Method in class com.ergotech.vib.servers.modbus.slave.BlockProcessImage
setUnits(String) - Method in class com.ergotech.secs.gem.GemVID: Sets the name of the units.
setUnrecoverableErrorHandler(UnrecoverableErrorInterface) - Static method in class com.ergotech.secs.SecsFormat00
setUnrecoverableErrorHandler(UnrecoverableErrorInterface) - Static method in class com.ergotech.secs.SecsMsg: Sets the unrecoverable error handler.
setupFileRecipeManager() - Method in class com.ergotech.transsecs.secs.TransSecsController
setUpperDB(double) - Method in class com.ergotech.secs.gem.GemLIMITID: Sets the upper DB.
setUrl(String) - Method in class com.ergotech.vib.manipulators.URLReader: Set the url to read the data from
setUseDefault(boolean) - Method in class com.ergotech.vib.manipulators.string.StringBuilder: Sets whether or not to use the defaultReplaceString if the token index does not exist in the input ArrayValueObject.
setUserName(String) - Method in class com.ergotech.vib.manipulators.Emailer
setUserObject(Object) - Method in class com.ergotech.secs.SecsEvent: This is a object passed in by the creator of the event.
setUsers(String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
setUsersURL(String) - Method in class com.ergotech.vib.manipulators.MixSecurityManager
setUseTimestamps(boolean) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: sets whether or not to create a timestamped 2DVO
setUseTransactionIds(boolean) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase: Set to true to use transaction ids.
setUSL(double) - Method in class com.ergotech.vib.manipulators.spc.SPC: sets a new upper specification limit
SetV(V) - Method in class com.ergotech.secs.VidVPair
setValid(boolean) - Method in class com.ergotech.secs.SessionManager
setValidator(ECIDValidationInterface) - Method in class com.ergotech.secs.gem.GemECID: Sets the validator.
setValue(SecsFormat, SecsFormat) - Method in interface com.ergotech.secs.gem.GemEquipmentInterface: This allows the equipment to poll the value of any VID.
setValue(String, ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to set the value of any VID.
setValue(String, SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to set the value of any VID to the exact SecsFormat value.
setValue(SecsFormat, SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to poll the value of any VID.
setValue(int, SecsFormat) - Method in class com.ergotech.secs.gem.GemHandler: This allows the equipment to poll the value of any VID.
setValue(SecsFormat) - Method in class com.ergotech.secs.gem.Monitor: Set the "constant" value used as a comparison for the condition.
SetValue - Class in com.ergotech.vib.manipulators: This manipulator will send a set value to the connectors when we receive a valueChagnedEvent.
SetValue() - Constructor for class com.ergotech.vib.manipulators.SetValue
setValue(ValueObjectInterface) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
setValueAt(int, int) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Sets the value at a particular offset into the block.
setValueAt(ValueObjectInterface, int, int) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: The new value replaces the existing value at the row and column index provided.
setValueFlash1(String) - Method in class com.ergotech.vib.manipulators.Blinker
setValueFlash2(String) - Method in class com.ergotech.vib.manipulators.Blinker
setValueForTrue(double) - Static method in class com.ergotech.vib.valueobjects.ValueObject: This will change the default value for true (when someone creates a valueobject sending the parameter of true, or the default hi value on a box.
setValueFrom(ControlLogixResponseDataBlock, int) - Method in class com.ergotech.vib.servers.ab.ControlLogixArrayServer: Set the value from the array of values created in the device server.
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Update the value of the server from an address block THIS should never be called on this class.
setValueFrom(ControlLogixResponseDataBlock, int) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Set the value from the array of values created in the device server.
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.ab.DF1Server: Update the value of the server from an address block
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.fins.FinsServer: Update the value of the server from an address block
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Update the value of the server from an address block Response: 0xD0 0x00 - 3E frame response message header 0x00 - network number 0xFF pc number 0xFF 0x03 - request destination module I/O number 0x00 - request destination module station number 0x06 0x00 - response data length (from after here to the end of the message).
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.modbus.Modbus0XServer: Update the value of the server from an address block.
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Update the value of the server from an address block.
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Update the value of the server from an address block
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Update the value of the server from an address block
setValueFrom(byte[], int, int) - Method in class com.ergotech.vib.servers.ppi.S7: Update the value of the server from an address block
setValueHi(double) - Method in class com.ergotech.vib.servers.DataSource: Sets the value of the server which will trigger the Hi color change.
setValueHiHi(double) - Method in class com.ergotech.vib.servers.DataSource: Sets the value of the server which will trigger the HiHi color change.
setValueLo(double) - Method in class com.ergotech.vib.servers.DataSource: Sets the value of the server which will trigger the Lo color change.
setValueLoLo(double) - Method in class com.ergotech.vib.servers.DataSource: Sets the value of the server which will trigger the LoLo color change.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemALID: Set the value to the new value.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemCEID: Received as a result of a value changed.
setValueObject(ValueObjectInterface, boolean) - Method in class com.ergotech.secs.gem.GemCEID: Received as a result of a value changed.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemDVNAME: Override the superclass to post the changed event.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemECID: Override the superclass to post the changed event.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemHostCEID: Publish a value.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemLIMITID: Checks the value of the incoming object against the limits.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemMDLN: If the incoming string is longer than 6 character then we will automatically set the SOFTREV.maxLength parameter to be 20.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemRPTID: Sets the value of the report id.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemSOFTREV: If the incoming string is longer than 6 character then we will automatically set the SOFTREV.maxLength parameter to be 20.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemSVID: Override the superclass to post the changed event.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemTimeFormat: Set the value to the new value.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemVID: Set the value to the new value.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.secs.gem.Monitor: Sets the new value to the monitor.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.Blinker: Sets the blinking flag to start the component blinking.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.BroadcastServer: This is here to allow outside development systems to change the value of the broadcast server.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.ConvertFromHex: This method will be called from all the servers sending values.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.ConvertToHex: This method will be called from all the servers sending values.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.datetime.DateToLong: This takes a Date input value and converts it to a long.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.datetime.LongToDate: This converts the input value to a long, which is converted to a Date.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.DecimalFormatter: This will capture the incoming value...
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.IPAddressServer: In the default implementation sends out dummy values.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PassOnThread: Sets the value of this object as a ValueObject.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PopupInitializer: This method is called by the PopuHelper with a value object that is the string to use to initializer the popup.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.Scaler: This method will be called from all the servers sending values.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.spc.PidControl: This method will be called from the server sending value for the process value when this value is changed.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.string.CombineStrings: This composes the output String when there is a new base String value.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.string.RegularExpression
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: This sets the value of the new StringValueObject.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.string.StringTrimmer: This sets the value of the new StringValueObject.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.string.TokenReplace: This sets the value of the new StringValueObject.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.ab.DF1Server: This is here to allow outside development systems to change the value of the broadcast server.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource.Writable: This is here to allow outside development systems to change the value of this active control.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.fins.FinsServer: This is here to allow outside development systems to change the value of the broadcast server.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.plc.PLCServer: This method is called by beans and other data sources to set the value of this server.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.ppi.S7: This is here to allow outside development systems to change the value of the broadcast server.
setValueObject(ValueObjectInterface) - Method in class com.ergotech.vib.servers.SimpleDataSource: Sets the value of this object as a ValueObject.
setValueObjectInternal(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemTimeFormat: Set the value to the new value.
setValueObjectSaveData(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemCEID: Received as a result of a value changed.
setValueOff(String) - Method in class com.ergotech.vib.manipulators.Blinker
setValues(List<GemID>) - Method in class com.ergotech.secs.gem.GemRPTID: This is expecting a vector of strings that represent the tag name to a valueobject (with value) or the DVNAME (that should be sent with the ValueObject.
setValues(Vector<ValueObjectInterface>) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: sets the elements of the array from a vector
setValueType(int) - Method in class com.ergotech.secs.gem.GemHostModel.GemValueVariable
setValueType(int) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Set the value type for this server.
setValueType(int) - Method in class com.ergotech.vib.servers.fins.FinsServer: Set the value type for this server.
setValueType(int) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Set the value type for this server.
setValueType(int) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Set the value type for this server.
setValueUpdateResponseListener(ValueUpdateResponseListener) - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: Sets the update response listener.
setVariableName(String) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Set the variable name.
setVersion2OrHigher(boolean) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
setVID(GemVID) - Method in class com.ergotech.secs.gem.GemLIMITID: Sets the VID that this limit is associated with.
SetVID(VID) - Method in class com.ergotech.secs.VidVPair
setVidSecsFormat(int) - Method in class com.ergotech.secs.gem.GemHostModel
setWordSize(int) - Method in class com.ergotech.vib.manipulators.ByteBuilder
setXColumnDataType(int) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the data type for the x column (first column of the value object) The types are 0 = timestamp, 1 = int, and 2 = double.
setXMax(double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the maximum for the X column data
setXMin(double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the minimum for the X column data
setY(float) - Method in class com.ergotech.vib.manipulators.Scaler
setYMax(double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the maximum for the Y column data
setYMin(double) - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Sets the minimum for the Y column data
setZeroBasedTime(boolean) - Method in class com.ergotech.vib.servers.ArrayDataSource: Sets whether or not to start at time=0.
SFCD - Class in com.ergotech.secs: Status form code 1 byte.
SFCD(byte) - Constructor for class com.ergotech.secs.SFCD: Create the object from a byte data type.
SFCD(SecsFormat) - Constructor for class com.ergotech.secs.SFCD: Create the object from a SecsFormat data type.
sharedPLCSimulation - Static variable in class com.ergotech.vib.servers.plc.PLCDeviceServer: Set to true to use a mapped file to share simulated PLC data.
sharedTimer - Variable in class com.ergotech.vib.servers.SimpleDataSource: the Timer for this data source
SHEAD - Class in com.ergotech.secs: Stored header related to the transaction timer - Used in S9F9 This is a one byte binary (Format 10) data structure
SHEAD(byte[]) - Constructor for class com.ergotech.secs.SHEAD: Create a new message from an array of bytes.
SHEAD(SecsMsg) - Constructor for class com.ergotech.secs.SHEAD: Create a new message from a SecsMsg
SHEAD(SecsFormat) - Constructor for class com.ergotech.secs.SHEAD: Create a new message from a SecsFormat data type.
shortName() - Method in class com.ergotech.secs.S100F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F105: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F31: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F32: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S100F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S10F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F12: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F19: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F20: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F21: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F22: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F23: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F24: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F25: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F26: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F27: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F28: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F29: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F30: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F31: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F32: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F33: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F34: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F35: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F36: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F37: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F38: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F39: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F40: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F41: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F42: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F43: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F44: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F45: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F46: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F47: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F48: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S15F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F12: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F19: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F20: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F6
shortName() - Method in class com.ergotech.secs.S1F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S1F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F12: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F19: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F20: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F21: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F22: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F23: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F24: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F25: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F26: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F27: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F28: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F29: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F30: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F31: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F32: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F33: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F34: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F35: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F36: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F37: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F38: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F39: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F40: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F41: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F42: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F43: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F44: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F45: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F46: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F47: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F48: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F49: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F50: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S2F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S5F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F12: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F19: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F20: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F21: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F22: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F23: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F24: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F25: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F26: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F27: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F28: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F29: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F30: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S6F99: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F10: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F12: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F14: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F15: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F16: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F17: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F18: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F19: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F2: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F20: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F4: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F6: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F8: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S7F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S99F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F0: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F1: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F11: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F13: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F3: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F5: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F7: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.S9F9: Returns the short name for this object.
shortName() - Method in class com.ergotech.secs.SecsMsg: Returns the short name for this message.
shortName() - Method in class com.ergotech.secs.SecsTrigger
SHORTTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
shouldBeAdded() - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns true if the server needs to be added to an address block.
shouldTrace(ValueObjectInterface) - Static method in class com.ergotech.vib.valueobjects.ValueObject: Returns true if the TRACE parameter is set and starts with a 'y' or 'Y'
showSpool(String, int) - Method in class com.ergotech.secs.gem.GemSpoolHandler: Show the spool for the only spooler.
showThinking - Static variable in class com.ergotech.transsecs.secs.VIBMessageBean: Whether to show the logic of matching messages.
sid - Static variable in class com.ergotech.vib.servers.fins.FinsDeviceServer: The SID.
SIGNED_DOUBLE_WORD - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
SIGNED_WORD - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
SimpleDataSource - Class in com.ergotech.vib.servers: This is the standard superclass for all servers.
SimpleDataSource() - Constructor for class com.ergotech.vib.servers.SimpleDataSource: Required no-arg constructor.
SimpleDataSource(String) - Constructor for class com.ergotech.vib.servers.SimpleDataSource: Generic constructor.
SimpleDataSource.NameEditorData - Class in com.ergotech.vib.servers: Pandering to the needs of the property editor.
SimpleManipulator - Class in com.ergotech.vib.manipulators: This is the superclass of most manipulators that pass data through themselves, including Triggered manipulators.
SimpleManipulator() - Constructor for class com.ergotech.vib.manipulators.SimpleManipulator: Generic constructor.
simulatedWrite(String, int, PLCDataBlock, int) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: This method is used to simulate a write to the device.
simulatedWrite(String, int, PLCDataBlock) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method is used to simulate a write to the device.
simulateRead(String, int, int) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method is used to provide data for a simulated read of the device.
simulating - Static variable in class com.ergotech.transsecs.secs.ConnectionConfig: The simulating flag.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.secs.HSMSSocketListener: Changes the state of the simulation mode.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.secs.SessionManager: Changes the state of the simulation mode.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.manipulators.Constant: Called when the simulation state changes.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.ports.PortDeviceServer: Sets/resets the global simulation flag.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusRTUSlave: Sets/resets the global simulation flag.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Sets/resets the global simulation flag.
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer
simulationStateChanged(SimulationChangedEvent) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Starts the listening thread when moving out of simulation mode.
SineServer - Class in com.ergotech.vib.servers: This sample data source produces a periodic wave which is a product of two sine waves with different periods (1:5).
SineServer() - Constructor for class com.ergotech.vib.servers.SineServer: Create the SineServer, a composite periodic oscillator.
SINGLE_THREADED - Static variable in class com.ergotech.secs.SessionManager
SINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
SINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
size() - Method in class com.ergotech.secs.SecsFormat20
size() - Method in class com.ergotech.secs.SecsFormat22: Returns the size of the data.
size() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: This returns the size
SLAVE_STATION - Static variable in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Frame Control Bit.
SLIM_FORMAT_TYPE - Static variable in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject
SLOTID - Class in com.ergotech.secs: SLOTID.
SLOTID(short) - Constructor for class com.ergotech.secs.SLOTID: Create a new message with a short (SecsFormat51).
SLOTID(int) - Constructor for class com.ergotech.secs.SLOTID
SLOTID(byte) - Constructor for class com.ergotech.secs.SLOTID
SLOTID(SecsFormat) - Constructor for class com.ergotech.secs.SLOTID: Create a new message with the data contained in a SecsFormat object.
SMPLN - Class in com.ergotech.secs: Sample number.
SMPLN() - Constructor for class com.ergotech.secs.SMPLN
SMPLN(long) - Constructor for class com.ergotech.secs.SMPLN
SMPLN(byte) - Constructor for class com.ergotech.secs.SMPLN
SMPLN(short) - Constructor for class com.ergotech.secs.SMPLN
SMPLN(int) - Constructor for class com.ergotech.secs.SMPLN
SMPLN(SecsFormat) - Constructor for class com.ergotech.secs.SMPLN
SOFTREV - Static variable in class com.ergotech.secs.gem.GemHandler
SOFTREV - Class in com.ergotech.secs: This class represents the Secs SOFTREV data structure.
SOFTREV(String) - Constructor for class com.ergotech.secs.SOFTREV: Create the SOFTREV with a string.
SOFTREV(SecsFormat) - Constructor for class com.ergotech.secs.SOFTREV: If the newData is a type of SecsFormat20 and the size is exactly six then the value is used directly.
SOH - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: SOH - 0x00
sort(int, boolean) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Sort the values.
sortedX - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: This defaults to true so that the X Column data is sorted from low to high.
SoundClipPlayer - Class in com.ergotech.vib.manipulators
SoundClipPlayer() - Constructor for class com.ergotech.vib.manipulators.SoundClipPlayer: Constructor
SP - Variable in class com.ergotech.vib.manipulators.spc.PidControl
SPAACK - Class in com.ergotech.secs: Equipment Acknowledge Code (SPAACK) Data Decoder, used in S2F4.
SPAACK(byte[]) - Constructor for class com.ergotech.secs.SPAACK: Create a new message with binary (format 10) data.
SPAACK(SecsFormat) - Constructor for class com.ergotech.secs.SPAACK: Create a new message with data contained in a SecsFormat object.
SPC - Class in com.ergotech.vib.manipulators.spc: Get the input from a process and calculate the statistical process control values
SPC() - Constructor for class com.ergotech.vib.manipulators.spc.SPC
SPD - Class in com.ergotech.secs: Service Program Data (SPD) Data Decoder, used in S2F3, F6.
SPD(byte[]) - Constructor for class com.ergotech.secs.SPD: Create a new message with binary (format 10) data.
SPD(SecsFormat) - Constructor for class com.ergotech.secs.SPD: Create a new message with data contained in a SecsFormat object.
SPID - Class in com.ergotech.secs: Service Program ID (SPID) Data Decoder, used in S2F1, F5, F7, F9, F12 and S9F13.
SPID(String) - Constructor for class com.ergotech.secs.SPID: Create a new message with ASCII (format 20) data.
SPID(SecsFormat) - Constructor for class com.ergotech.secs.SPID: Create a new message with data contained in a SecsFormat object.
SplitterDataSource(OutPortConnectionInterface) - Constructor for class com.ergotech.vib.manipulators.array.ArraySplitter.SplitterDataSource
SplitterDataSource(OutPortConnectionInterface) - Constructor for class com.ergotech.vib.manipulators.array.IOTArraySplitter.SplitterDataSource
SPOOL_ALL_STREAMS_REMOVED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when all the streams are removed from the spooler as a result of an S2F43 message.
SPOOL_STREAM_ADDED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when a stream is added to the spooler as a result of an S2F43 message.
SPOOL_STREAM_AND_FUNCTION_ADDED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when a stream is added to the spooler as a result of an S2F43 message.
SpoolHandler - Interface in com.ergotech.secs: This is a MessageHandler for Spooling
spoolMessage(SecsMsg) - Method in class com.ergotech.secs.gem.GemSpoolHandler: This will accept spool requests and determine how to handle them.
SPR - Class in com.ergotech.secs: Service Program Results (SPR) Data Decoder, used in S2F10.
SPR(byte[]) - Constructor for class com.ergotech.secs.SPR: Create a new message with binary (format 10) data.
SPR(String) - Constructor for class com.ergotech.secs.SPR: Create a new message with ASCII (format 20) data.
SPR(boolean) - Constructor for class com.ergotech.secs.SPR: Create a new message with Boolean (SecsFormat11) data.
SPR(float) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 4-Byte floating point number (SecsFormat44).
SPR(double) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 8-Byte floating point number (SecsFormat40).
SPR(long) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 8-Byte integer (SecsFormat30).
SPR(byte) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 1-Byte integer (SecsFormat31).
SPR(short) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 2-Byte integer (SecsFormat32).
SPR(int) - Constructor for class com.ergotech.secs.SPR: Create a new message with an 4-Byte integer (SecsFormat34).
SPR(SecsFormat) - Constructor for class com.ergotech.secs.SPR: Create a new message with data contained in a SecsFormat object.
SQLSelectStatement - Class in com.ergotech.vib.manipulators.string: This manipulator creates a SELECT SQL Statement when triggered.
SQLSelectStatement() - Constructor for class com.ergotech.vib.manipulators.string.SQLSelectStatement
Square - Class in com.ergotech.vib.manipulators: Returns the Square of the input.
Square() - Constructor for class com.ergotech.vib.manipulators.Square: Generic Constructor.
SquareRoot - Class in com.ergotech.vib.manipulators: Returns the Square Root of the input.
SquareRoot() - Constructor for class com.ergotech.vib.manipulators.SquareRoot: Generic Constructor.
SS_CONNECTION_IN_GS_MODE - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a Single Session message is received in General Session Mode.
StandAloneModbusSlave - Class in com.ergotech.vib.servers.modbus.slave: This uses the new j2mod (j2mod.jar com.ghgande.j2mod)
StandAloneModbusSlave() - Constructor for class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
start() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Calls through to the TransSecsController method.
start() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Add the connector for the response.
start() - Method in class com.ergotech.transsecs.secs.MessageBean: Calls initMessage to find the controller and specific message and creates connectors from the message.
start() - Method in class com.ergotech.transsecs.secs.SecsEventFilter: Add the event on start.
start() - Method in class com.ergotech.transsecs.secs.TransSecsController: Start the component.
start() - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: Start referenced devices
start() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: This is the true constructor.
start() - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: Also start the output data source.
start() - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Also start the output data source.
start() - Method in class com.ergotech.vib.manipulators.Blinker: Registers the timer if we're supposed to be blinking.
start() - Method in class com.ergotech.vib.manipulators.Constant: This will start the server, sending the value.
start() - Method in class com.ergotech.vib.manipulators.MixSecurityManager: Reads the user and group files.
start() - Method in class com.ergotech.vib.manipulators.PassOnThread: Allow the thread to start.
start() - Method in class com.ergotech.vib.manipulators.SetValue: Overridden to handle the haveSeenTrigger logic.
start() - Method in class com.ergotech.vib.ports.PortDeviceServer: This method controls communication to the device.
start() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.DataSource: By default this method will call resume.
start() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Start all the servers.
start() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer
start() - Method in class com.ergotech.vib.servers.fins.FinsPLC: Create the listener.
start() - Method in class com.ergotech.vib.servers.MarqueeServer: Starts the device server.
start() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
start() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServerBase
start() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase
start() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Create the listener.
start() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: After creating the server, tags should be added to the server.
start() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Start the timer.
start() - Method in class com.ergotech.vib.servers.plc.PLCArray: Starts this server and all the servers we created.
start() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method controls communication to the device.
start() - Method in class com.ergotech.vib.servers.plc.PLCServer: This will attach the server to its device server.
start() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: Overridden to add the instance from the ppiDeviceServers Vector.
start() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: initialize the port pool once the container has been set.
start() - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
start() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
start() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
start() - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
start() - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
start() - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
start() - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
start() - Method in class com.ergotech.vib.servers.rest.RestWrapper: After creating the server, tags should be added to the server.
start() - Method in class com.ergotech.vib.servers.SimpleDataSource: By default this method will call resume.
startAddress - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock: The starting address of this block expressed as an integer.
startLevel - Variable in class com.ergotech.vib.servers.FloatFluxServer: The target level.
startTimeoutTimer() - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: This will start the timer.
StartupTrigger - Class in com.ergotech.vib.manipulators: This is a trivial subclass of Constant.
StartupTrigger() - Constructor for class com.ergotech.vib.manipulators.StartupTrigger: constructor
StateChangeNotification - Interface in com.ergotech.secs.gem: This interface should be implemented by anyone wishing to be notified of or control state changes.
StatisticalTimeCategorizer - Class in com.ergotech.vib.manipulators.array: Group values by mean, median, min, max or range.
StatisticalTimeCategorizer() - Constructor for class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer
Status - Variable in class TransSECS.MessageNotifierEventArgs: The status of the message.
STIME - Class in com.ergotech.secs: Sample time.
STIME() - Constructor for class com.ergotech.secs.STIME: Create the object using the current Date and Time.
STIME(Date) - Constructor for class com.ergotech.secs.STIME: Create the object from a Date data type.
STIME(Date, boolean) - Constructor for class com.ergotech.secs.STIME: Create the object from a Date data type.
STIME(String) - Constructor for class com.ergotech.secs.STIME: Create the object from a String data type.
STIME(SecsFormat) - Constructor for class com.ergotech.secs.STIME: Create the object from a SecsFormat data type.
stop() - Method in class com.ergotech.transsecs.secs.LocalEquipmentConfig: Calls through to the TransSecsController method.
stop() - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Remove the connector for the response.
stop() - Method in class com.ergotech.transsecs.secs.MessageBean: Removes the connector and nulls the message variable.
stop() - Method in class com.ergotech.transsecs.secs.SecsEventFilter: Unlisten for the event.
stop() - Method in class com.ergotech.transsecs.secs.TransSecsController: Stop the component.
stop() - Method in class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient: Stop referenced devices
stop() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur
stop() - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: Also stop the output data source.
stop() - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Also stop the output data source.
stop() - Method in class com.ergotech.vib.manipulators.Blinker: Unregisters the timer.
stop() - Method in class com.ergotech.vib.manipulators.PassOnThread: This will stop the running thread.
stop() - Method in class com.ergotech.vib.manipulators.PopupInitializer.ConnectableDataSource: Remove any connections from the name manaer.
stop() - Method in class com.ergotech.vib.manipulators.SetValue
stop(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: This method is called by beans and other data sources to set the value of this server.
stop() - Method in class com.ergotech.vib.ports.PortDeviceServer: This method is the opposite of "start" after calling this method, until the start method is called again, there will be no communication with the device.
stop() - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: Release the serial port.
stop() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Overridden to remove the instance from the DeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Overridden to remove the instance from the DeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Overridden to remove the instance from the df1DeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Overridden to remove the instance from the DeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.DataSource: By default this method will call suspend.
stop() - Method in class com.ergotech.vib.servers.DeviceManagerManipulator: Stop all the servers.
stop() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Overridden to remove the instance from the modbusDeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.fins.FinsPLC: Stop the server permanently.
stop() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Overridden to remove the instance from the modbusDeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Overridden to remove the instance from the modbusDeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Stop the server permanently.
stop() - Method in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: Stop the server.
stop() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Overridden to remove the instance from the hostLinkDeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.plc.PLCArray: Stops this server and all the servers we created.
stop() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: This method is the opposite of "start" after calling this method, until the start method is called again, there will be no communication with the device.
stop() - Method in class com.ergotech.vib.servers.plc.PLCServer: Disconnects the server from the device server and then stops the server.
stop() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServerBase: Overridden to remove the instance from the ppiDeviceServers Vector.
stop() - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
stop() - Method in class com.ergotech.vib.servers.raspi.RaspiI2CDataSource
stop() - Method in class com.ergotech.vib.servers.raspi.RaspiPinDataSource
stop() - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
stop() - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
stop() - Method in class com.ergotech.vib.servers.rest.RestWrapper: Stop the server.
stop() - Method in class com.ergotech.vib.servers.SimpleDataSource: By default this method will call suspend.
stopConnectionThread() - Method in class com.ergotech.secs.HSMSActiveWrapper: This will stop the connection thread.
stopped - Variable in class com.ergotech.vib.servers.DataSource: a boolean indicating whether the data source is stopped.
stopThread() - Method in class com.ergotech.vib.servers.fins.FinsPLC: Requests the that listening thread be stopped.
stopThread() - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: Requests the that listening thread be stopped.
stopTimeoutTimer() - Method in class com.ergotech.secs.SessionManagerTimeoutTimer: This will stop the timer and cause the timer thread to exit.
store() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Store the object to it's persistent form.
storeCurrentValues(TransSecsController) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This method will store the current values from the controller to the XML file.
storeCurrentValues(Object) - Method in class com.ergotech.transsecs.secs.MqttPersistentConfig: This method will store the current values from the device server to the XML file.
storeCurrentValues(Object) - Method in class com.ergotech.transsecs.secs.RestPersistentConfig: This method will store the current values from the device server to the XML file.
storeToXML() - Method in class com.ergotech.secs.gem.GemSpoolHandler: Save the handler object.
str1 - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource
str2 - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource
str3 - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource
STRACK - Class in com.ergotech.secs: Spool Stream Acknoowledge.
STRACK(byte) - Constructor for class com.ergotech.secs.STRACK: Create a new message with binary (format 10) data.
STRACK(SecsFormat) - Constructor for class com.ergotech.secs.STRACK
stream - Variable in class com.ergotech.secs.S0F0: The stream of this message (default is zero).
STREAM_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when the system cannot attach input or output streams to the port.
STRID - Class in com.ergotech.secs: Stream Identification.
STRID(int) - Constructor for class com.ergotech.secs.STRID: Create a new message with an 1-Byte integer unsigned (SecsFormat51).
STRID(SecsFormat) - Constructor for class com.ergotech.secs.STRID
STRING - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
STRING_VALUE - Static variable in class com.ergotech.vib.servers.plc.PLCServer: The value type STRING
StringBuilder - Class in com.ergotech.vib.manipulators.string: This manipulator creates a new StringValueObject from a template by replacing tokens with elements of an input ArrayValueObject.
StringBuilder() - Constructor for class com.ergotech.vib.manipulators.string.StringBuilder
StringLength - Class in com.ergotech.vib.manipulators.string: The input valueObject value is converted to a String then the length calculated.
StringLength() - Constructor for class com.ergotech.vib.manipulators.string.StringLength
StringServer - Class in com.ergotech.vib.servers: A simple data source that provides a String as the output data.
StringServer() - Constructor for class com.ergotech.vib.servers.StringServer: Zero argument constructor
StringSplitter - Class in com.ergotech.vib.manipulators.string
StringSplitter() - Constructor for class com.ergotech.vib.manipulators.string.StringSplitter: Create and initialize the manipulator.
StringToArray - Class in com.ergotech.vib.manipulators.array: Takes a comma separated list of items in a String and creates an ArrayValueObject with the items.
StringToArray() - Constructor for class com.ergotech.vib.manipulators.array.StringToArray: Create and initialize the manipulator.
StringTrimmer - Class in com.ergotech.vib.manipulators.string: This manipulator creates a substring of the input String using the "start remove" and the "end remove" values.
StringTrimmer() - Constructor for class com.ergotech.vib.manipulators.string.StringTrimmer
STRINGTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface
StringValue() - Method in class com.ergotech.secs.CARRIERID
StringValue() - Method in class com.ergotech.secs.CTLJOBCMD
StringValue() - Method in class com.ergotech.secs.CTLJOBID
StringValue() - Method in class com.ergotech.secs.PRCMDNAME
StringValue() - Method in class com.ergotech.secs.PRJOBID
StringValue() - Method in class com.ergotech.secs.PRJOBSPACE
StringValue() - Method in class com.ergotech.secs.PRMTRLORDER
StringValue() - Method in class com.ergotech.secs.PRSTATE
StringValue() - Method in class com.ergotech.secs.SLOTID
StringValueObject - Class in com.ergotech.vib.valueobjects: This is the instance of ValueObject that is created when you use the setBoolValue(), setIntValue(), setFloatValue() and setStringValue().
StringValueObject() - Constructor for class com.ergotech.vib.valueobjects.StringValueObject: The default constructor.
StringValueObject(Locale) - Constructor for class com.ergotech.vib.valueobjects.StringValueObject: The default constructor.
StringValueObject(String, Color) - Constructor for class com.ergotech.vib.valueobjects.StringValueObject: Creates a value object with the current double value.
StringValueObject(String) - Constructor for class com.ergotech.vib.valueobjects.StringValueObject: Creates a value object with the current integer value.
StringValueObject(String, Locale) - Constructor for class com.ergotech.vib.valueobjects.StringValueObject: Creates a value object with the current integer value.
stripEscapes(String) - Static method in class com.ergotech.vib.manipulators.string.RegularExpression: Removes escape characters from the string.
stripType(int, String) - Method in class com.ergotech.secs.gem.GemHandler: This strips the type identifier from the string.
STRUCT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
STRUCT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
STRUCT_COUNTER - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
STRUCT_COUNTER - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
STRUCT_STRING - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
STRUCT_STRING - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer
STX - Static variable in class com.ergotech.vib.servers.ab.DF1DeviceServer: STX - 0x02
subList(int, int) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
Subtract - Class in com.ergotech.vib.manipulators: Calculates the difference of two numbers.
Subtract() - Constructor for class com.ergotech.vib.manipulators.Subtract: Constructor.
subtractionValueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Subtract: This is the input method for the value that is to be subtracted from the main input.
sumError - Variable in class com.ergotech.vib.manipulators.spc.PidControl
SUPERVISOR - Static variable in class com.ergotech.vib.manipulators.LocalSecurityManager: The constant for "supervisor"
suspended - Variable in class com.ergotech.vib.servers.DataSource: a boolean indicating whether or not the data source is currently suspended
suspendEncoding() - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Suspends encoding of the stream.
SV - Class in com.ergotech.secs
SV(String) - Constructor for class com.ergotech.secs.SV: Create a new message with ASCII (format 20) data.
SV(boolean) - Constructor for class com.ergotech.secs.SV: Create a new message with Boolean (SecsFormat11) data.
SV(float) - Constructor for class com.ergotech.secs.SV: Create a new message with an 4-Byte floating point number (SecsFormat44).
SV(byte[]) - Constructor for class com.ergotech.secs.SV: Create a new message with an array of bytes (SecsFormat10).
SV(double) - Constructor for class com.ergotech.secs.SV: Create a new message with an 8-Byte floating point number (SecsFormat40).
SV(long) - Constructor for class com.ergotech.secs.SV: Create a new message with an 8-Byte integer (SecsFormat30).
SV(byte) - Constructor for class com.ergotech.secs.SV: Create a new message with an 1-Byte integer (SecsFormat31).
SV(short) - Constructor for class com.ergotech.secs.SV: Create a new message with an 2-Byte integer (SecsFormat32).
SV(int) - Constructor for class com.ergotech.secs.SV: Create a new message with an 4-Byte integer (SecsFormat34).
SV(SecsFormat) - Constructor for class com.ergotech.secs.SV: Create a new message with the data contained in a SecsFormat object.
SVID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify an SVID.
SVID - Class in com.ergotech.secs: Status Variable ID.
SVID(String) - Constructor for class com.ergotech.secs.SVID: Create a new message with ASCII (format 20) data.
SVID(long) - Constructor for class com.ergotech.secs.SVID: Create a new message with an 8-Byte integer (SecsFormat30).
SVID(byte) - Constructor for class com.ergotech.secs.SVID: Create a new message with an 1-Byte integer (SecsFormat31).
SVID(short) - Constructor for class com.ergotech.secs.SVID: Create a new message with an 2-Byte integer (SecsFormat32).
SVID(int) - Constructor for class com.ergotech.secs.SVID: Create a new message with an 4-Byte integer (SecsFormat34).
SVID(SecsFormat) - Constructor for class com.ergotech.secs.SVID: Create a new message with the data contained in a SecsFormat object.
SVID - Static variable in class TransSECS.GemIDConnection: Used to identify an SVID.
SVID_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an SVID's value has changed.
svids - Variable in class com.ergotech.secs.gem.GemHandler: The Vector of all the SVIDs.
SVNAME - Class in com.ergotech.secs: Status Variable Name.
SVNAME(String) - Constructor for class com.ergotech.secs.SVNAME: Create a new message with ASCII (format 20) data.
SVNAME(SecsFormat) - Constructor for class com.ergotech.secs.SVNAME: Create a new message with the data contained in a SecsFormat object.
SynchronizedClockTick - Class in com.ergotech.vib.servers: This is a subclass of the ExtremeServer but it ticks only exactly on the interval requested.
SynchronizedClockTick() - Constructor for class com.ergotech.vib.servers.SynchronizedClockTick: The default constructor which calls the superclass constructor
syncWriteTimeout - Static variable in class com.ergotech.vib.servers.SimpleDataSource: This is the number of seconds that we will wait before a person who is sync'd to write will hold the write ability.
SYSLOG_FACILITY - Static variable in class com.ergotech.secs.SyslogLogger
SYSLOG_HOST - Static variable in class com.ergotech.secs.SyslogLogger
SYSLOG_LOG_LEVEL - Static variable in class com.ergotech.secs.SyslogLogger
SYSLOG_PORT - Static variable in class com.ergotech.secs.SyslogLogger
SyslogLogger - Class in com.ergotech.secs: A logger object that logs to the syslog.
SyslogLogger(String, String) - Constructor for class com.ergotech.secs.SyslogLogger
SystemHandlerInterface - Interface in com.ergotech.secs: This interface can be added to a message handler that is a system handler.

T

T1_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T1 Timeout Occurs.
T2_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T2 Timeout Occurs.
T3_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T3 Timeout Occurs.
T4_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T4 Timeout Occurs.
T5_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T5 Timeout Occurs.
T6_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T6 Timeout Occurs.
T7_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T7 Timeout Occurs.
T8_TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a T8 Timeout Occurs.
TAGSER - Class in com.ergotech.secs: SMART-Tag serial number, 4-bytes.
TAGSER(int) - Constructor for class com.ergotech.secs.TAGSER: Create a new message with an 4-Byte integer unsigned (SecsFormat54).
TAGSER(SecsFormat) - Constructor for class com.ergotech.secs.TAGSER: Create a new message with the data contained in a SecsFormat object.
TAGSN - Class in com.ergotech.secs: TAGSN.
TAGSN(byte) - Constructor for class com.ergotech.secs.TAGSN: Create a new message with an 1-Byte integer (SecsFormat51).
TAGSN(SecsFormat) - Constructor for class com.ergotech.secs.TAGSN: Create a new message with the data contained in a SecsFormat object.
TARGETSPEC - Class in com.ergotech.secs: TARGETSPEC Object specifier of target object Used in S14, S15F43
TARGETSPEC(String) - Constructor for class com.ergotech.secs.TARGETSPEC: Create a new message with ASCII (format 20) data.
TARGETSPEC(SecsFormat) - Constructor for class com.ergotech.secs.TARGETSPEC: Create a new message with the data contained in a SecsFormat object.
TCPActivePortFactory - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
TCPActivePortFactory(String) - Constructor for class com.ergotech.vib.ports.TCPActivePortFactory: Create the port factory with a specific name.
TCPActiveSocket - Class in com.ergotech.vib.ports: This will wrap a socket.
TCPActiveSocket(String) - Constructor for class com.ergotech.vib.ports.TCPActiveSocket: Create the socket.
TCPPassivePortFactory - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
TCPPassivePortFactory(String) - Constructor for class com.ergotech.vib.ports.TCPPassivePortFactory: Create the port factory with a specific name.
TCPPassivePortFactory.PassivePortPool - Class in com.ergotech.vib.ports: The port pool concept is slightly different for a passive port.
TCPPassiveSocket - Class in com.ergotech.vib.ports: This will wrap a socket.
TCPPassiveSocket(Socket) - Constructor for class com.ergotech.vib.ports.TCPPassiveSocket: Create the socket.
TerminalServerPortManager - Class in com.ergotech.secs
TerminalServerPortManager(int, String) - Constructor for class com.ergotech.secs.TerminalServerPortManager: Creates the port manager.
TerminalServerWrapper - Class in com.ergotech.secs: This is the wrapper for a SECSI interface over ethernet through a terminal server or similar.
TerminalServerWrapper(int, int, String, Class) - Constructor for class com.ergotech.secs.TerminalServerWrapper: The constructor.
testElement(SecsFormat) - Method in class com.ergotech.secs.MessageVerifierOneItem
testPanel - Static variable in class com.ergotech.transsecs.secs.TransSecsController: The test panel.
TEXT - Class in com.ergotech.secs: TEXT a single line of characters, Used in S10F1,F3,F5,F9 The format is a 10, 20, 3x or 5x
TEXT(byte) - Constructor for class com.ergotech.secs.TEXT: Create a new message from a byte data type.
TEXT(String) - Constructor for class com.ergotech.secs.TEXT: Create a new message with ASCII (format 20) data.
TEXT(long) - Constructor for class com.ergotech.secs.TEXT: Create a new message with an 8-Byte integer (SecsFormat30).
TEXT(short) - Constructor for class com.ergotech.secs.TEXT: Create a new message with an 2-Byte integer (SecsFormat32).
TEXT(int) - Constructor for class com.ergotech.secs.TEXT: Create a new message with an 4-Byte integer (SecsFormat34).
TEXT(SecsFormat) - Constructor for class com.ergotech.secs.TEXT: Create a new message with the data contained in a SecsFormat object.
theData - Variable in class com.ergotech.secs.SecsDataStructure
theData - Variable in class com.ergotech.secs.SecsFormat10
theData - Variable in class com.ergotech.secs.SecsFormat11: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat20
theData - Variable in class com.ergotech.secs.SecsFormat22: The data for this object.
theData - Variable in class com.ergotech.secs.SecsFormat30: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat31: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat32: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat34: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat40: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat44: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat50: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat51: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat52: The data value for this format.
theData - Variable in class com.ergotech.secs.SecsFormat54: The data value for this format.
theData - Variable in class com.ergotech.transsecs.secs.SecsFormat99: Mimic of SecsFormat except that "theData" is a ValueObjectInterface.
theExceptionString() - Method in class com.ergotech.secs.S100F1: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S100F13
theExceptionString() - Method in class com.ergotech.secs.S100F17: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S100F18: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S100F2: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S100F31: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S15F1: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S1F1: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F10: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F11: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F13: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F14: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F2: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S1F3
theExceptionString() - Method in class com.ergotech.secs.S1F4
theExceptionString() - Method in class com.ergotech.secs.S1F6: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S1F8: Exception string as defined by the SEMI standard.
theExceptionString() - Method in class com.ergotech.secs.S2F10: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F12
theExceptionString() - Method in class com.ergotech.secs.S2F13
theExceptionString() - Method in class com.ergotech.secs.S2F14
theExceptionString() - Method in class com.ergotech.secs.S2F18: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F27
theExceptionString() - Method in class com.ergotech.secs.S2F29
theExceptionString() - Method in class com.ergotech.secs.S2F35: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F37: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F42: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F43: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F44: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F45: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F46: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F47: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F48: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F49: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S2F6: The description of the exception defined by the SEMI specification.
theExceptionString() - Method in class com.ergotech.secs.S5F3
theExceptionString() - Method in class com.ergotech.secs.S5F5
theExceptionString() - Method in class com.ergotech.secs.S5F6
theExceptionString() - Method in class com.ergotech.secs.S6F1
theExceptionString() - Method in class com.ergotech.secs.S6F11
theExceptionString() - Method in class com.ergotech.secs.S6F13
theExceptionString() - Method in class com.ergotech.secs.S6F16
theExceptionString() - Method in class com.ergotech.secs.S6F18
theExceptionString() - Method in class com.ergotech.secs.S6F20
theExceptionString() - Method in class com.ergotech.secs.S6F22
theExceptionString() - Method in class com.ergotech.secs.S6F25
theExceptionString() - Method in class com.ergotech.secs.S6F26
theExceptionString() - Method in class com.ergotech.secs.S6F27
theExceptionString() - Method in class com.ergotech.secs.S6F30
theExceptionString() - Method in class com.ergotech.secs.S6F8
theExceptionString() - Method in class com.ergotech.secs.S7F1
theExceptionString() - Method in class com.ergotech.secs.S7F17
theExceptionString() - Method in class com.ergotech.secs.S7F2
theExceptionString() - Method in class com.ergotech.secs.S7F6: Return the exception
theExceptionString() - Method in class com.ergotech.secs.S7F8: Return the exception
theExceptionString() - Method in class com.ergotech.secs.SecsMsg: Returns a string description of the message exception.
theValue - Variable in class com.ergotech.vib.valueobjects.ValueChangedEvent: The value that is being passed by this event.
TIAACK - Class in com.ergotech.secs: Equipment Acknowledge Code.
TIAACK(byte) - Constructor for class com.ergotech.secs.TIAACK: Create a new message from a byte data type.
TIAACK(SecsFormat) - Constructor for class com.ergotech.secs.TIAACK: Create a new message from a SecsFormat data type.
TIACK - Class in com.ergotech.secs: Time Acknowledge Code.
TIACK(byte) - Constructor for class com.ergotech.secs.TIACK: Create a new message from a byte data type.
TIACK(SecsFormat) - Constructor for class com.ergotech.secs.TIACK: Create a new message from a SecsFormat data type.
tick(Timer) - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Refresh the image on the timer tick.
tick(Timer) - Method in class com.ergotech.vib.servers.SimpleDataSource: The heartbeat of the data source.
tick(Timer) - Method in class com.ergotech.vib.servers.SynchronizedClockTick: The heartbeat of the data source.
TID - Class in com.ergotech.secs: Terminal number, 1 byte - Used in S10F1,F3,F5,F7.
TID(byte) - Constructor for class com.ergotech.secs.TID: Create a new message from a byte data type.
TID(SecsFormat) - Constructor for class com.ergotech.secs.TID: Create a new message from a SecsFormat data type.
TIME - Class in com.ergotech.secs: Time Of Day.
TIME() - Constructor for class com.ergotech.secs.TIME: Create the object using the current Date and Time.
TIME(Date) - Constructor for class com.ergotech.secs.TIME: Create the object from a Date data type.
TIME(Date, boolean) - Constructor for class com.ergotech.secs.TIME: Create the object from a Date data type.
TIME(String) - Constructor for class com.ergotech.secs.TIME: Create the object from a String data type.
TIME(SecsFormat) - Constructor for class com.ergotech.secs.TIME: Create the object from a SecsFormat data type.
TIME_COLUMN_NAME - Static variable in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: Property identifier for the "has time" property.
timebase - Variable in class com.ergotech.vib.servers.SimpleDataSource: the time, in seconds, between updates of this data source to its connectors
timeDelay - Variable in class com.ergotech.vib.manipulators.TimeDelayTrigger: The time delay.
TimeDelayTrigger - Class in com.ergotech.vib.manipulators: The time delay (in sec) is started from an input trigger.
TimeDelayTrigger() - Constructor for class com.ergotech.vib.manipulators.TimeDelayTrigger: The default constructor which sets the time delay to 0.
timedPopupLogger - Static variable in class com.ergotech.vib.servers.DataSource: This is the timed logger for this component.
TIMEFORMAT - Class in com.ergotech.secs: TIMEFORMAT: Setting of this ECV controls whether the equipment shall send the the TIME data item in 12-byte or 16-byte format: 1 = 12 byte format(default) 2 = 16 byte format Used in S2F15, S100F15, and S100F132.
TIMEFORMAT(byte) - Constructor for class com.ergotech.secs.TIMEFORMAT: Create a new message with an 1-Byte integer (SecsFormat51).
TIMEFORMAT(SecsFormat) - Constructor for class com.ergotech.secs.TIMEFORMAT: Create a new message with the data contained in a SecsFormat object.
timeInterval - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: This is the time interval in seconds between generated timestamps.
timeKeeper - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
timeout - Static variable in class com.ergotech.secs.gem.EventSpooler: This defines how long we will wait for the primary to be processed and a response returned.
TIMEOUT - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU timeout error.
TIMEOUT_ERROR - Static variable in class com.ergotech.secs.SecsMsg: Indicates that the transaction completed with a T3.
TIMEOUT_ERROR - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: Indicates that the transaction completed with a T3.
TimeoutSocketFactory - Class in com.ergotech.vib.ports: This class provides an implementation of a Socket factory that provides a timeout.
TimeServer - Class in com.ergotech.vib.servers
TimeServer() - Constructor for class com.ergotech.vib.servers.TimeServer
timeSpacing - Variable in class com.ergotech.vib.servers.ArrayDataSource: the time spacing for the generated data
TIMESTAMP - Class in com.ergotech.secs: TIMESTAMP A text string indicating the time of an event, which encodes time in the folloing format: YYYYYMMDDhhmmsscc Used in S5F9, F11, F15, S15F41, F44, S16F5, F7
TIMESTAMP(String) - Constructor for class com.ergotech.secs.TIMESTAMP: Create a new message with ASCII (format 20) data.
TIMESTAMP(SecsFormat) - Constructor for class com.ergotech.secs.TIMESTAMP: Create a new message with the data contained in a SecsFormat object.
timeToSend(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: Called when the timer expires.
toArray() - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
toArray(T[]) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject
toATTRDATAArray() - Method in class com.ergotech.secs.PRPAUSEEVENT
toBCD(int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Convert the incoming value to a BCD value.
toBCD(long, int) - Method in class com.ergotech.vib.servers.plc.PLCServer: Convert the incoming value to a BCD value.
toBoolean() - Method in class com.ergotech.secs.PRPROCESSSTART: Returns the boolean representation of this object.
toByteArray(long, byte[], int, int) - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Returns the variable as a byte[].
toByteArray(long, byte[], int, int) - Static method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Returns the variable as a byte[].
toByteArray(long, byte[], int, int) - Static method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Returns the variable as a byte[].
toCEIDArray() - Method in class com.ergotech.secs.PRPAUSEEVENT
toEquipment() - Method in class com.ergotech.secs.S100F1: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F105: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F11: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F13: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F31: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F8: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S100F9: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S10F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S10F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S10F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S10F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F1: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F10: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F11: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F12: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F13: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F14: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F16: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F18: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F19: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F20: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F21: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F22: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F23: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F24: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F25: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F26: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F27: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F28: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F29: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F30: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F31: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F32: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F33: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F34: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F35: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F36: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F37: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F38: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F39: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F4: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F40: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F41: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F42: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F43: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F44: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F45: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F46: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F47: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F48: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F6: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F7: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F8: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S15F9: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F1: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F11: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F13: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F14: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F7: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S1F9: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F1: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F11: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F12: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F13: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F16: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F18: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F19: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F21: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F23: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F25: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F26: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F27: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F29: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F31: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F33: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F35: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F37: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F39: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F4: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F41: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F43: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F45: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F47: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F49: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F6: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F7: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F8: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S2F9: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S5F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S5F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S5F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S5F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S5F7: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F10: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F12: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F14: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F19: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F21: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F23: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F25: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F26: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F28: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F29: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F4: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F6: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F7: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S6F99: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F1: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F15: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F17: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F19: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F2: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F4: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F5: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F6: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F8: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S7F9: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S99F3: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.S9F0: Returns true since this method can be sent to the equipment.
toEquipment() - Method in class com.ergotech.secs.SecsMsg: Returns true if this message is intended to be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S100F10: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F14: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F2: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F32: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S100F7: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S10F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S10F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S10F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S10F6: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F10: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F11: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F12: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F13: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F14: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F15: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F17: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F19: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F20: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F21: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F22: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F23: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F24: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F25: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F26: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F27: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F28: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F29: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F3: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F30: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F31: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F32: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F33: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F34: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F35: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F36: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F37: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F38: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F39: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F40: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F41: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F42: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F43: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F44: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F45: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F46: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F47: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F48: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F5: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F6: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F7: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F8: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S15F9: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F10: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F12: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F13: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F14: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F19: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F2: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F20: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S1F6
toHost() - Method in class com.ergotech.secs.S1F8: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F10: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F11: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F12: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F14: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F17: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F2: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F20: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F22: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F24: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F25: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F26: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F28: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F3: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F30: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F32: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F34: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F36: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F38: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F40: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F42: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S2F44: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S2F46: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S2F48: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S2F5: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F50: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S2F6: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F7: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F8: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S2F9: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S5F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S5F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S5F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S5F6: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S5F8: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F1: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S6F11: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F13: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F20: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F22: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F24: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F25: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F26: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F27: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F3: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S6F30: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S6F5: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S6F8: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S6F9: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S7F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F1: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F10: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F11: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F12: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F13: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F14: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F16: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F18: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F2: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F20: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F4: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F5: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F6: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F7: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S7F9: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S9F0: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S9F1: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S9F11: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S9F13: Returns true since this method can be sent to the host.
toHost() - Method in class com.ergotech.secs.S9F3: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S9F5: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S9F7: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.S9F9: Returns true since this method can be sent to the equipment.
toHost() - Method in class com.ergotech.secs.SecsMsg: Returns true if this message is intended to be sent to the host.
toJSON(boolean, boolean) - Method in class com.ergotech.vib.valueobjects.ArrayValueObject: Creates a json array.
toJSON(boolean, boolean, String) - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject
toJSON() - Method in class com.ergotech.vib.valueobjects.ValueObject
toJSON(boolean, boolean) - Method in class com.ergotech.vib.valueobjects.ValueObject: Build a json representation of the object, structured: { "type": "object"|"array"|"2d", "value": \, "timestamp": \, {"header": \} }
toJSON(boolean, boolean, String) - Method in class com.ergotech.vib.valueobjects.ValueObject: Build a json representation of the object, structured: { "type": "object"|"array"|"2d", "value": \, "timestamp": \, {"header": \} }
toJSON() - Method in interface com.ergotech.vib.valueobjects.ValueObjectInterface: Build a json representation of the object, structured: { "type": "object"|"array"|"2d", "value": \, "timestamp": \, {"header": \} }
toJSONString() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Create a JSON String that represents the class.
TokenReplace - Class in com.ergotech.vib.manipulators.string: This manipulator creates a new String by replacing tokens in the input String.
TokenReplace() - Constructor for class com.ergotech.vib.manipulators.string.TokenReplace
TOO_MANY_CONNECTIONS - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when an HSMS connection request is made but the connection count has been exceeded.
TOO_MANY_ERRORS_STRING - Static variable in class com.ergotech.vib.ports.PortDeviceServer: The string that is displayed when too many errors have been detected.
toSlimJSON() - Method in class com.ergotech.vib.valueobjects.TwoDimensionalValueObject
toSMLString() - Method in class com.ergotech.secs.SecsFormat00: Returns the SML string representing this value
toString() - Method in class com.ergotech.secs.ACKA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ACKC1: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ACKC10: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ACKC5: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ACKC6: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ACKC7: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.AGENT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ALCD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ALED: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ALID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.AREYOUTHERE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ATTRDATA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CARRIERID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CEED: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CEID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CEPACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CEPVAL: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CMDA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.COMMACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CPACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CPVAL: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CSAACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CTLJOBCMD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.CTLJOBID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.DRACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.DVVAL: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.EAC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ECDEF: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ECID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ECMAX: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ECMIN: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ECV: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.EDID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ERACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.ERRCODE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.FCNID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.gem.GemHostModel
toString() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemAlarmVariable
toString() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemLimitVariable
toString() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable
toString() - Method in class com.ergotech.secs.gem.GemToolModelSnapshot.GemVariable
toString() - Method in class com.ergotech.secs.gem.Log4JLogger: Create a string that lists the loggers were a passing through to.
toString() - Method in class com.ergotech.secs.gem.OnlineHandler
toString() - Method in class com.ergotech.secs.GRANT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.GRANT6: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.HCACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.HINTEG: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.HSMSActiveWrapper: Returns an description of this object.
toString() - Method in class com.ergotech.secs.HSMSHeaderMsg: Returns a nicely formatted text string.
toString() - Method in class com.ergotech.secs.HSMSPassiveWrapper: Returns an description of this object.
toString() - Method in class com.ergotech.secs.HSMSSocketListener
toString() - Method in class com.ergotech.secs.LENGTH: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LIMITACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LIMITID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LIMITMAX: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LIMITMIN: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LINKID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LOWERDB: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LRACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.LVACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.MF: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.MMODE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.OBJSPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.OBJTOKEN: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.OFLACK
toString() - Method in class com.ergotech.secs.ONLACK
toString() - Method in class com.ergotech.secs.OPID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PODEVENT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PPBODY: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PPGNT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PPID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRCMDNAME: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PREVENTID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRJOBID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRJOBMILESTONE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRJOBSPACE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRMTRLORDER: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRPAUSEEVENT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRPROCESSSTART: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRRECIPEMETHOD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.PRSTATE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RAC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCMD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPATTRDATA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPATTRID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPBODY: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPCLASS: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPCMD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPDEL: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPDESCNM: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPDESCTIME: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPNAME: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPNEWID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPOWCODE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPPARNM: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPPARRULE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPPARVAL: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPRENAME: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPSECCODE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPSECNM: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPSTAT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPUPDT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RCPVERS: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.REPGSZ: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RESETENA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RESPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RIC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMCHGSTAT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMDATASIZE: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMGRNT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMNEWNS: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMNSCMD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMNSSPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMRECSPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMREQUESTOR: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RMSEGSPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RSDA: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RSDC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.RSPACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SARM: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SecsDataStructure: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsDataStructure: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsEvent: This will make a human readable string describing the Event
toString() - Method in class com.ergotech.secs.SecsEventHandler: Try to make the SecsEventHandlers display be a little more human readable.
toString(int) - Method in interface com.ergotech.secs.SecsFormat: Returns an SML string correctly indented.
toString() - Method in class com.ergotech.secs.SecsFormat00
toString(int) - Method in class com.ergotech.secs.SecsFormat00: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat10: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat10: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat11: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat11: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat20: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat20: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat22: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat22: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat30: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat30: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat31: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat31: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat32: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat32: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat34: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat34: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat40: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat40: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat44: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat44: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat50: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat50: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat51: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat51: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat52: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat52: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsFormat54: Returns the SML string representing this value
toString(int) - Method in class com.ergotech.secs.SecsFormat54: Returns the indented SML string representing this value.
toString() - Method in class com.ergotech.secs.SecsISocketManager: Return the string representation of this object.
toString() - Method in class com.ergotech.secs.SecsMsg: Returns a nicely formatted text string.
toString() - Method in class com.ergotech.secs.SerialPortManager: Return the string representation of this object.
toString() - Method in class com.ergotech.secs.SessionManager: Returns a description of this session manager.
toString() - Method in class com.ergotech.secs.SFCD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SLOTID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SPAACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SPD: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SPID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SPR: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.STRACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.STRID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SV: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SVID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.SVNAME: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TAGSER: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TAGSN: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TARGETSPEC: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TerminalServerPortManager: Return the string representation of this object.
toString() - Method in class com.ergotech.secs.TEXT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TIAACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TIACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TIMEFORMAT: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TIMESTAMP: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TOTSMP: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TRID: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TSIP: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.TSOP: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.UPPERDB: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.V: Returns the string representation of this object.
toString() - Method in class com.ergotech.secs.VLAACK: Returns the string representation of this object.
toString() - Method in class com.ergotech.transsecs.secs.Log4JLogger: Create a string that lists the loggers were a passing through to.
toString() - Method in class com.ergotech.transsecs.secs.MultiLogger: Create a string that lists the loggers were a passing through to.
toString() - Method in class com.ergotech.transsecs.secs.SecsFormat99
toString(int) - Method in class com.ergotech.transsecs.secs.SecsFormat99
toString() - Method in class com.ergotech.transsecs.secs.TransSecsController: Create a toString to be proud of...
toString() - Method in class com.ergotech.transsecs.secs.TransSecsVoyeur: Create a toString to be proud of...
toString() - Method in class com.ergotech.transsecs.secs.VIBLogger
toString() - Method in class com.ergotech.transsecs.secs.VIBMessageBean: Create a toString to be proud of...
toString() - Method in class com.ergotech.vib.manipulators.Add: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.And: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.array.ArrayBuilder: Provides the value of the elements of the array output as a String.
toString() - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: Provides the internal byte and array output as a String.
toString() - Method in class com.ergotech.vib.manipulators.Blinker: Provides a description of the current values and states.
toString() - Method in class com.ergotech.vib.manipulators.ByteBuilder: Provides the internal byte and array output as a String.
toString() - Method in class com.ergotech.vib.manipulators.ByteSplitter: Provides the internal byte and array output as a String.
toString() - Method in class com.ergotech.vib.manipulators.Counter: Provides a description of the current values and states.
toString() - Method in class com.ergotech.vib.manipulators.DataValve: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Divide: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Equal: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.GreaterThan: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.GreaterThanOrEqual
toString() - Method in class com.ergotech.vib.manipulators.LessThan: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.LessThanOrEqual: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Manipulator: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Multiply: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Not: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.NotEqual: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Or: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.PropertyFilter: Provides a description of the current values and states.
toString() - Method in class com.ergotech.vib.manipulators.SetValue: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Square: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.SquareRoot: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.string.SQLSelectStatement: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Subtract: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.manipulators.Xor: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.ports.PortDeviceServer: Returns the assigned name of this device.
toString() - Method in class com.ergotech.vib.ports.SerialWrapper
toString() - Method in class com.ergotech.vib.servers.ab.ControlLogixAddressBlock: Return an intelligent description.
toString() - Method in class com.ergotech.vib.servers.ab.ControlLogixArrayServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ab.ControlLogixResponseDataBlock
toString() - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ab.DF1Server: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ab.MicroLogixServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ArrayDataSource: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.servers.DataSource: Provides the description of the server as a String
toString() - Method in class com.ergotech.vib.servers.fins.FinsServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.FloatFluxServer: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.servers.melsec.MelsecServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.modbus.ModbusASCIIDeviceServer: Return the string representation of this object.
toString() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServerBase: Return the string representation of this object.
toString() - Method in class com.ergotech.vib.servers.modbus.ModbusServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServerBase: Return the string representation of this object.
toString() - Method in class com.ergotech.vib.servers.omron.HostLinkServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Return an intelligent description.
toString() - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Returns the assigned name of this device.
toString() - Method in exception com.ergotech.vib.servers.plc.PLCException: The to string method.
toString() - Method in class com.ergotech.vib.servers.plc.PLCServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Return the string representation of this object.
toString() - Method in class com.ergotech.vib.servers.ppi.PPIServer: returns a string representation of this server.
toString() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Return the string representation of this object.
toString() - Method in class com.ergotech.vib.servers.SimpleDataSource: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.servers.TwoDimensionalDataSource: Provides the description and status of the server as a String.
toString() - Method in class com.ergotech.vib.valueobjects.BinaryValueObject: Convert the binary value to a hex string.
toString() - Method in class com.ergotech.vib.valueobjects.DateRangeValueObject
toString() - Method in class com.ergotech.vib.valueobjects.DoubleValueObject: Provide a less precise numeric format.
toString() - Method in class com.ergotech.vib.valueobjects.ValueChangedEvent: Returns a String representation of this ValueChangedEvent.
toString() - Method in class com.ergotech.vib.valueobjects.ValueObject: This will display the value as a string.
TOTSMP - Class in com.ergotech.secs: Total Samples to be made.
TOTSMP(String) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with ASCII (format 20) data.
TOTSMP(long) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with an 8-Byte integer (SecsFormat30).
TOTSMP(byte) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with an 1-Byte integer (SecsFormat31).
TOTSMP(short) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with an 2-Byte integer (SecsFormat32).
TOTSMP(int) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with an 4-Byte integer (SecsFormat34).
TOTSMP(SecsFormat) - Constructor for class com.ergotech.secs.TOTSMP: Create a new message with the data contained in a SecsFormat object.
TRACE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: If a property with this name exists and starts with a 'y' or 'Y' then the value will be considered "traceable".
traceLogger - Static variable in class com.ergotech.vib.servers.DataSource: This is the logger for this component.
TraceServer - Class in com.ergotech.secs.gem: A extension of SimpleDataSource is used to collect trace data.
TraceServer() - Constructor for class com.ergotech.secs.gem.TraceServer
TraceServer(TRID) - Constructor for class com.ergotech.secs.gem.TraceServer
TransactionManager - Class in com.ergotech.secs: This will spool all outgoing messages from the time a primary is sent until the response is received.
TransactionManager(String) - Constructor for class com.ergotech.secs.TransactionManager
TransSECS - package TransSECS
transSecsApplicationType - Static variable in class com.ergotech.transsecs.secs.TransSecsController: Provides a type for the transecs application.
TransSecsController - Class in com.ergotech.transsecs.secs: This is the main host controller for TransSECS.
TransSecsController() - Constructor for class com.ergotech.transsecs.secs.TransSecsController: The bean constructor so that this bean can be used in development systems.
transSecsController - Variable in class com.ergotech.transsecs.secs.VIBMessageBean: This is the transSecsController for this message bean.
TransSecsController.ResponseWrapper - Class in com.ergotech.transsecs.secs: Register with the message bean and then calls the messageReceived.
TRANSSECSCONTROLLER_NAME_KEY - Static variable in interface com.ergotech.secs.gem.ReportWriter
TransSecsControllerDevicesClient - Class in com.ergotech.transsecs.secs: This extends TransSecsController to provide some mapping methods for opc clients.
TransSecsControllerDevicesClient() - Constructor for class com.ergotech.transsecs.secs.TransSecsControllerDevicesClient
TransSecsControllerOPCClient - Class in com.ergotech.transsecs.secs: This extends TransSecsController to provide some mapping methods for opc clients.
TransSecsControllerOPCClient() - Constructor for class com.ergotech.transsecs.secs.TransSecsControllerOPCClient
TransSecsVoyeur - Class in com.ergotech.transsecs.secs: This is the TransSECS Voyeur.
TransSecsVoyeur() - Constructor for class com.ergotech.transsecs.secs.TransSecsVoyeur
TransSecsVoyeur.ConnectionEventListener - Class in com.ergotech.transsecs.secs: The SecsEvent Listener.
TRID - Class in com.ergotech.secs: Trace request ID.
TRID(String) - Constructor for class com.ergotech.secs.TRID: Create a new message with ASCII (format 20) data.
TRID(long) - Constructor for class com.ergotech.secs.TRID: Create a new message with an 8-Byte integer (SecsFormat30).
TRID(byte) - Constructor for class com.ergotech.secs.TRID: Create a new message with an 1-Byte integer (SecsFormat31).
TRID(short) - Constructor for class com.ergotech.secs.TRID: Create a new message with an 2-Byte integer (SecsFormat32).
TRID(int) - Constructor for class com.ergotech.secs.TRID: Create a new message with an 4-Byte integer (SecsFormat34).
TRID(SecsFormat) - Constructor for class com.ergotech.secs.TRID: Create a new message with the data contained in a SecsFormat object.
trigger(ValueChangedEvent) - Method in class com.ergotech.secs.gem.GemALID: Set the value to the new value if data quality is good.
trigger(ValueObjectInterface) - Method in class com.ergotech.secs.gem.GemCEID: This will send the event report if the report is enabled and the trigger data quality is good.
trigger(ValueObjectInterface) - Method in interface com.ergotech.secs.gem.GemCEIDExportInterface: The trigger method from GemCEID.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.CommandExecutor: Connecting to this inport will cause the command to execute without any additional arguments.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Counter: Increment the current value if it is counting up, or decrement it if it is counting down.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: When this manipulator receives a "trigger" input (valueChangedEvent on this port) the new GenericValueObject will be created with the date composed from the inputs.
trigger() - Method in class com.ergotech.vib.manipulators.PopupInitializer: This method is called by the PopuHelper with a value object that is the string to use to initializer the popup.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.SetValue: Trigger the send of the value..
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.SoundClipPlayer: This method will be called when any value is received
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: This method is called by beans and other data sources to set the value of this server.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.URLReader: Read the file and send it to the output.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.UserFileReader: Read the file and send it to the output.
trigger(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
TRIGGER_PORT_NAME - Static variable in class com.ergotech.secs.gem.GemALID: This is the name that we publish use to publish the trigger.
TRIGGER_PORT_NAME - Static variable in class com.ergotech.secs.gem.GemCEID: This is the name that we publish use to publish the trigger.
triggerEvent(int) - Method in class TransSECS.GemIDConnection: This method should be called from the C# object.
TriggerPayloadDecoder() - Constructor for class com.ergotech.vib.servers.mqttwrapper.MqttWrapper.TriggerPayloadDecoder
triggerRead() - Method in class com.ergotech.vib.servers.plc.PLCServer: This method will trigger a read of the server and will update the listeners.
triggerValueChanged(ValueChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCArray: This allows a server without a timebase to be triggered for a read
triggerValueChanged(ValueChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCServer: This allows a server without a timebase to be triggered for a read
TrueFalseManipulator - Class in com.ergotech.vib.manipulators: This manipulator returns a boolean "true" if the input matches one of the tokens in the comma separated list of "true" values, otherwise it returns a "false" value.
TrueFalseManipulator() - Constructor for class com.ergotech.vib.manipulators.TrueFalseManipulator: Constructor.
trueString - Variable in class com.ergotech.vib.manipulators.TrueFalseManipulator: A comma separated list of Strings that will convert to "true".
TSIP - Class in com.ergotech.secs: Transfer status of input port, 1 Byte - Used in S1F10.
TSIP(byte) - Constructor for class com.ergotech.secs.TSIP: Create a new message from a byte data type.
TSIP(SecsFormat) - Constructor for class com.ergotech.secs.TSIP: Create a new message from a SecsFormat data type.
TSOP - Class in com.ergotech.secs: Transfer status of output port, 1 Byte - Used in S1F10.
TSOP(byte) - Constructor for class com.ergotech.secs.TSOP: Create a new message from a byte data type.
TSOP(SecsFormat) - Constructor for class com.ergotech.secs.TSOP: Create a new message from a SecsFormat data type.
twelveByte - Static variable in class com.ergotech.secs.STIME: This controls the format of this structure.
twelveByte - Static variable in class com.ergotech.secs.TIME: This controls the format of this structure.
TwoDimensionalDataSource - Class in com.ergotech.vib.servers: This generates TwoDimensionalValueObjects for testing VIB components.
TwoDimensionalDataSource() - Constructor for class com.ergotech.vib.servers.TwoDimensionalDataSource: Constructor
TwoDimensionalValueObject - Class in com.ergotech.vib.valueobjects: This is a object that can hold a two dimensional array of ValueObjects.
TwoDimensionalValueObject(int) - Constructor for class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is the generic constructor , it creates an object in the default locale.
TwoDimensionalValueObject(int, Locale) - Constructor for class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is the generic constructor.
TwoDimensionalValueObject(Vector<Vector<ValueObjectInterface>>, Locale) - Constructor for class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is the generic constructor.
TwoDimensionalValueObject() - Constructor for class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is the generic constructor.
TwoDimensionalValueObject(Locale) - Constructor for class com.ergotech.vib.valueobjects.TwoDimensionalValueObject: This is the generic constructor.
TWODTYPE - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface

U

UDINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
UDPActivePortFactory - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
UDPActivePortFactory(String) - Constructor for class com.ergotech.vib.ports.UDPActivePortFactory: Create the port factory with a specific name.
UDPActiveSocket - Class in com.ergotech.vib.ports: This will wrap a socket.
UDPActiveSocket(String) - Constructor for class com.ergotech.vib.ports.UDPActiveSocket: Create the socket.
UDPPassivePortFactory - Class in com.ergotech.vib.ports: This will wrap a serial port and allow us to read and write to it as a port interface.
UDPPassivePortFactory(String) - Constructor for class com.ergotech.vib.ports.UDPPassivePortFactory: Create the port factory with a specific name.
UDPPassiveSocket - Class in com.ergotech.vib.ports: This will wrap a socket.
UDPPassiveSocket(int) - Constructor for class com.ergotech.vib.ports.UDPPassiveSocket: Create the socket.
UDPSocket - Class in com.ergotech.vib.ports: This will wrap a socket.
UDPSocket() - Constructor for class com.ergotech.vib.ports.UDPSocket
UINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
ULINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
UNDEFINED - Static variable in class com.ergotech.secs.gem.GemLIMITID
undefineVariableLimits(SecsFormat3x5x, SecsFormat3x5x) - Method in class com.ergotech.secs.gem.ECHandler: This will undefine the limit for the vid.
undefineVariableLimits(SecsFormat3x5x, SecsFormat3x5x) - Method in interface com.ergotech.secs.gem.EquipmentControlInterface: This will undefine the limit for the vid.
unicodeOffset - Variable in class com.ergotech.vib.manipulators.string.StringSplitter
uniqueID - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
unitId - Static variable in class com.ergotech.vib.servers.modbus.slave.StandAloneModbusSlave
UNITS - Class in com.ergotech.secs: Units Identifier.
UNITS(String) - Constructor for class com.ergotech.secs.UNITS: Create a new message with ASCII (format 20) data.
UNITS(SecsFormat) - Constructor for class com.ergotech.secs.UNITS: Create a new message with data contained in a SecsFormat object.
UNKNOWN_ERROR - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Some unidentified error.
UNKNOWN_ERROR - Static variable in class com.ergotech.vib.servers.ppi.PPIDataBlock: PDU some other error.
UnrecoverableErrorInterface - Interface in com.ergotech.secs: An object of this type can be registered with SecsMsg to control the behavior of errors that would normally result in the sending of a stream 9 message.
unregisterFactory(String) - Method in class com.ergotech.vib.ports.PortFactoryManager: This will remove the resource from public access.
unregisterInstance(VIBMessageBean) - Static method in class com.ergotech.transsecs.secs.TransSecsController: Unregister an instance of a VIBMessageBean.
UNSIGNED_DOUBLE_WORD - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
UNSIGNED_WORD - Static variable in class com.ergotech.vib.servers.modbus.ModbusArray: Address type constant.
UNSOLICITED - Static variable in class com.ergotech.secs.SecsMsg: This indicates that we received a unsolicted message.
UNSOLICITED - Static variable in interface com.ergotech.transsecs.secs.MessageNotifier: This indicates that we received a unsolicited message.
UNWANTED_EXTENSION - Static variable in class com.ergotech.vib.manipulators.string.CodeToString: .properties.
update(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Update the outputs from the event.
update(ValueObjectInterface, long) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Update the outputs from the event.
update() - Method in class com.ergotech.vib.manipulators.BitSelector: This will select the bit from the raw input value and update connectors.
update(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.Counter: Update called whenever output is needed.
update() - Method in class com.ergotech.vib.manipulators.datetime.DateInfo: This will update any clients listening.
update() - Method in class com.ergotech.vib.manipulators.DecimalFormatter: This will combine the raw value and the formatter, store it in formattedValue ...
update() - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This method is called whenever any input is changed.
update() - Method in class com.ergotech.vib.manipulators.MasterCalculator: This method is called whenever any input is changed.
update() - Method in class com.ergotech.vib.manipulators.MasterComparer: This method is called whenever any input is changed.
update() - Method in class com.ergotech.vib.manipulators.MasterMathConversions: This method is called whenever any input is changed.
update(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PropertyFilter: This takes the incoming value and sets the quality of the data.
update() - Method in class com.ergotech.vib.manipulators.Scaler: This method is called whenever the attached data source changes
update() - Method in class com.ergotech.vib.manipulators.spc.SPC: Called each time when the value of input is changed.
update() - Method in class com.ergotech.vib.manipulators.Square: Calculates the SQRT
update() - Method in class com.ergotech.vib.manipulators.SquareRoot: Calculates the SQRT
update() - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This will calculate the new output value and update connectors.
UPDATE_CLASSNAMES - Static variable in class com.ergotech.vib.servers.mqttwrapper.MqttWrapper: The array of classes that need to be periodically updated.
UPDATE_DISPLAYED_VALUE - Static variable in class com.ergotech.vib.manipulators.Manipulator: The name of the primary input method.
updateColor(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.Constant: The superclass sets the color according to values/levels which is not what we want for this component.
updateColor(ValueObjectInterface) - Method in class com.ergotech.vib.manipulators.PropertyFilter: The superclass sets the color according to values/levels which is not what we want for this component.
updateColor(ValueObjectInterface) - Method in class com.ergotech.vib.servers.DataSource: This method will be called AFTER the currentValue is updated, and BEFORE we updateListeners.
updateListeners() - Method in class com.ergotech.vib.servers.DataSource: Updates all valueChangedListeners by sending a ValueChangedEvent to them.
updateListeners(ValueUpdateResponseListener) - Method in class com.ergotech.vib.servers.DataSource: Updates all valueChangedListeners by sending a ValueChangedEvent to them.
updateListeners(ValueObjectInterface, ValueUpdateResponseListener) - Method in class com.ergotech.vib.servers.DataSource: Updates all valueChangedListeners by sending a ValueChangedEvent to them.
UPPERDB - Class in com.ergotech.secs: UPPERDB data decode.
UPPERDB(String) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with ASCII (format 20) data.
UPPERDB(boolean) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with Boolean (SecsFormat11) data.
UPPERDB(float) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 4-Byte floating point number (SecsFormat44).
UPPERDB(double) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 8-Byte floating point number (SecsFormat40).
UPPERDB(long) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 8-Byte integer (SecsFormat30).
UPPERDB(byte) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 1-Byte integer (SecsFormat31).
UPPERDB(short) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 2-Byte integer (SecsFormat32).
UPPERDB(int) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with an 4-Byte integer (SecsFormat34).
UPPERDB(SecsFormat) - Constructor for class com.ergotech.secs.UPPERDB: Create a new message with data contained in a SecsFormat object.
UPPERZONE - Static variable in class com.ergotech.secs.gem.GemLIMITID
URLReader - Class in com.ergotech.vib.manipulators
URLReader() - Constructor for class com.ergotech.vib.manipulators.URLReader
USER - Static variable in class com.ergotech.vib.manipulators.LocalSecurityManager: The constant for "user"
USER_NAME - Static variable in interface com.ergotech.vib.valueobjects.ValueObjectInterface: The property name for the current user.
UserFileReader - Class in com.ergotech.vib.manipulators: This component reads a file from the "userfiles" folder, and sends the entire contents of the user file, as a string, to the output of the bean.
UserFileReader() - Constructor for class com.ergotech.vib.manipulators.UserFileReader
useTimestamps - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: This defaults to true so that a timestamp column is added for each row.
USINT - Static variable in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer
Utils - Class in com.ergotech.vib.utils: This class only holds static methods that are used throught out VIB.
Utils() - Constructor for class com.ergotech.vib.utils.Utils

V

V - Class in com.ergotech.secs: Variable data.
V(SecsFormat) - Constructor for class com.ergotech.secs.V: Create a new message with SecsFormat data.
V(String) - Constructor for class com.ergotech.secs.V: Create a new message with ASCII (format 20) data.
V(boolean) - Constructor for class com.ergotech.secs.V: Create a new message with Boolean (SecsFormat11) data.
V(float) - Constructor for class com.ergotech.secs.V: Create a new message with an 4-Byte floating point number (SecsFormat44).
V(double) - Constructor for class com.ergotech.secs.V: Create a new message with an 8-Byte floating point number (SecsFormat40).
V(long) - Constructor for class com.ergotech.secs.V: Create a new message with an 8-Byte integer (SecsFormat30).
V(byte) - Constructor for class com.ergotech.secs.V: Create a new message with an 1-Byte integer (SecsFormat31).
V(short) - Constructor for class com.ergotech.secs.V: Create a new message with an 2-Byte integer (SecsFormat32).
V(int) - Constructor for class com.ergotech.secs.V: Create a new message with an 4-Byte integer (SecsFormat34).
val - Variable in class com.ergotech.secs.CPNAMEVALPAIR
val - Variable in class com.ergotech.secs.VidVPair
validate(SecsFormat) - Method in class com.ergotech.secs.gem.GemECID: Validate the potential change.
validateCredentials(String, String) - Method in class com.ergotech.vib.manipulators.LocalSecurityManager
validateECIDChange(SecsFormat, SecsFormat, SecsFormat) - Method in interface com.ergotech.secs.gem.ECIDValidationInterface: Validate the proposed change of the ECID.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixServer: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.DF1Server: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.MicroLogixServer: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.fins.FinsServer: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.melsec.MelsecServer: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.modbus.ModbusServer: Returns true if the response to a write message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.omron.HostLinkServer: Returns true if the response to a message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.plc.PLCServer: Returns true if the response to a write message is correct.
validateResponse(PLCDataBlock, PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.PPIServer: Returns true if the response to a message is correct.
value - Variable in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This is the input value received at the valueChanged input.
value - Variable in class com.ergotech.vib.manipulators.MasterCalculator: This is the input value received at the valueInput.
value - Variable in class com.ergotech.vib.manipulators.MasterMathConversions: This is the input value received at the valueInput.
value - Variable in class com.ergotech.vib.manipulators.TrueFalseManipulator: This is the input value received at the valueChanged input.
Value - Class in TransSECS: This object provides access to values.
Value(ValueObjectInterface) - Constructor for class TransSECS.Value
VALUE_INPUT - Static variable in class com.ergotech.vib.manipulators.Manipulator: The name of the primary input method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.secs.gem.GemCEID: Add the "Trigger" input.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This allows for a staticmethodevent to occur.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Uses the locations hashtable to find a server that matches the need and then calls valueInput on it.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.ArrayBuilder: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.ByteBuilder: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Counter: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.DataValve: This allows the for a StaticMethodEvent to occur.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Divide: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Emailer: This is used for StaticMethodListener interface.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Manipulator: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterCalculator: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterComparer: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterMathConversions: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MixSecurityManager: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.SetValue: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.SoundClipPlayer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.CombineStrings: This allows the for a staticmethodevent to occur.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Subtract: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.TimeDelayTrigger: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.URLReader: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.UserFileReader: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.DataSource.Writable: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusPresetSingleRegisterServer: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCArray: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCServer: This calls the proper valueChanged method based on the return from the getStaticLocationFor method.
valueChanged(int, ValueChangedEvent) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: This is the default valuechanged with a location used by the staticmethodevent to find a specific entry value object.
valueChanged(ValueChangedEvent) - Method in class TransSECS.GemIDConnection.ValueConverter
valueChanged(int, Value) - Method in interface TransSECS.ValueNotifier: Called whenever the value changes.
ValueChangedEvent - Class in com.ergotech.vib.valueobjects: This event will be used by a DataSource to tell a ValueChangedListener when its value has been updated.
ValueChangedEvent(DataSource) - Constructor for class com.ergotech.vib.valueobjects.ValueChangedEvent: This is the default constructor.
ValueChangedEvent(Object, ValueObjectInterface) - Constructor for class com.ergotech.vib.valueobjects.ValueChangedEvent: This constructor takes an Object as the source (which should be a DataSource object in most cases) and a new value.
ValueChangedEvent(Object, ValueObjectInterface, ValueUpdateResponseListener) - Constructor for class com.ergotech.vib.valueobjects.ValueChangedEvent: This constructor takes an Object as the source (which should be a DataSource object in most cases) and a new value.
valueForTrue - Static variable in class com.ergotech.vib.valueobjects.ValueObject
valueHi - Variable in class com.ergotech.vib.servers.DataSource: the float value threashold for using ColorHi
valueHiHi - Variable in class com.ergotech.vib.servers.DataSource: the float value threashold for using ColorHiHi
ValueHolderDeviceManager - Class in com.ergotech.vib.servers: This is a device manager that allows creation of servers
ValueHolderDeviceManager() - Constructor for class com.ergotech.vib.servers.ValueHolderDeviceManager
valueInput(ValueChangedEvent) - Method in class com.ergotech.secs.gem.GemCEID: Reset the trigger if the flag is set.
valueInput(ValueChangedEvent) - Method in class com.ergotech.secs.gem.GemID: overrides Manipulator valueInput so we can only use good quality data.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.ConnectionConfig: This method will reset the TransSecsController default values.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.FileRead: This method is called by beans and other data sources to set the value of this server.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalHostConfig: Connect or disconnect
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.LocalMessageReference: Send the message, resolve the notification status and output the result of sending the message.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.MessageBean: Causes the message to be sent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.TransSecsController: Sets the value for the given VID.
valueInput(ValueChangedEvent) - Method in class com.ergotech.transsecs.secs.VIBMessageBean.WaitForResponse
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.ArrayBuilder: This accepts any value and uses the integral portion as a mask for the output.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.ArrayElementFilter: This method will be called when a new array is input.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.ArraySplitter: This method will be called when ever a new value is available.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.ArrayToString: This method will be called when ever a new value is available.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.HistoricalTimebaseBridger: This is the primary input method that accepts a ValueChangedEvent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArrayBuilder: This accepts any value and uses the integral portion as a mask for the output.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.IOTArraySplitter: Update the outputs from the event.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.RollingArrayBuilder: This is the primary input method that accepts a ValueChangedEvent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.StatisticalTimeCategorizer: This is the primary input method that accepts a ValueChangedEvent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.array.StringToArray: This method will create an array value object from a comma delimited string.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.BitSelector: This is called whenever the ValueChangedEvent is triggered.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.BroadcastServer: This is the primary input method that accepts a ValueChangedEvent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.ByteBuilder: This accepts any value and uses the integral portion as a mask for the output.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.ByteSplitter: This method is called when there is a new numeric input.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.CommandExecutor: Connecting to this inport will cause the command to execute with the value of the event used as the argument to the command.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.DataValve: This method will be called when the default input data source(s) change value
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateInfo: This will receive dates and calculate whats to send out.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Emailer: This is where all events come in.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.IPAddressServer: This is the primary input method that accepts a ValueChangedEvent.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.Manipulator: This method is called by beans and other data sources to set the value of this server.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterBooleanCalculator: This is the primary input method for the main value.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterCalculator: This is the primary input method for the main value.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.MasterMathConversions: This is the input method.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.PassOnThread: The input to this bean.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.PropertyFilter: This will take the string out the the event, and parse it.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.RateCalculator: This method will be called from all the servers sending values.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.SetValue: This method can be exposed and used to send values that are more complex than strings to the component.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.spc.SPC: This method will be called when a primary (input) data source's value changes.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.CodeToString
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.StringBuilder: This method will be called when ever a new value is available.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.StringLength
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.string.StringSplitter: This method will be called whenever a new ValueObject is received.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.TrueFalseManipulator: This is the input method.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.ports.serial.SerialPortDevice: This is the trigger routine.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.DataSource.Writable: This method is called by beans and other data sources to set the value of this server.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusArray: This method assumes that it receives an array value object.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.modbus.slave.ModbusSlaveBase: The trigger input.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.plc.PLCArray: This method assumes that it receives an array value object.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: This method accepts data that is to be sent to the PLC.
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.PWMManipulator
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.RaspiI2CManipulator
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.RaspiPinManipulator
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.RaspiPwmManipulator
valueInput(ValueChangedEvent) - Method in class com.ergotech.vib.servers.raspi.RaspiSPIManipulator
valueLo - Variable in class com.ergotech.vib.servers.DataSource: the float value threashold for using ColorLo
valueLoLo - Variable in class com.ergotech.vib.servers.DataSource: the float value threashold for using ColorLoLo
ValueNotifier - Interface in TransSECS: This interface can be registered with the GemIDConnection to receive notification of incoming values.
ValueObject - Class in com.ergotech.vib.valueobjects
ValueObject() - Constructor for class com.ergotech.vib.valueobjects.ValueObject: Generic constructor.
ValueObject(Locale) - Constructor for class com.ergotech.vib.valueobjects.ValueObject: Generic constructor.
ValueObjectInterface - Interface in com.ergotech.vib.valueobjects: This interface is implemented by any object that wants to represent the current value of a DataSource.
valueOf(String) - Static method in enum com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable.VariableType: Returns the enum constant of this type with the specified name.
values() - Static method in enum com.ergotech.secs.gem.GemToolModelSnapshot.GemReportVariable.VariableType: Returns an array containing the constants of this enum type, in the order they are declared.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.gem.CommunicationsHandler: This checks outgoing messages to make sure that we allow them to go out.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.gem.EventOutSpooler: This method checks to see if the outgoing message is a primary.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.gem.EventSpooler
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.gem.GemSpoolHandler: This checks to see if we need to spool the message.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.gem.OnlineHandler: This checks outgoing messages to make sure that we allow them to go out.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.MessageVerifier: The response from this message determines whether the message is blocked or not.
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.MessageVerifierOneItem
verifyMessage(SecsMsg) - Method in interface com.ergotech.secs.SystemHandlerInterface: This method will be called on ALL outgoing messages (for each system message handler).
verifyMessage(SecsMsg) - Method in class com.ergotech.secs.TransactionManager: This method checks to see if the outgoing message is a primary.
VIBAuthenticationFailedException - Exception in com.ergotech.vib.exceptions
VIBAuthenticationFailedException(String) - Constructor for exception com.ergotech.vib.exceptions.VIBAuthenticationFailedException
VIBEvent(VIBEvent) - Method in class com.ergotech.secs.gem.GemLIMITID: Implement of VIBEventListener.
VIBEvent(com.ergotech.vib.utils.VIBEvent) - Method in class com.ergotech.vib.manipulators.array.ArrayBuilder
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.DataSource: We are interested in few events.
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.plc.PLCServer: We are interested in few events.
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: Resets "applethost".
VIBEvent(VIBEvent) - Method in class com.ergotech.vib.servers.SimpleDataSource: We are interested in few events.
VIBInMessageBean - Class in com.ergotech.transsecs.secs
VIBInMessageBean() - Constructor for class com.ergotech.transsecs.secs.VIBInMessageBean: Default constructor.
VIBInOutMessageBean - Class in com.ergotech.transsecs.secs
VIBInOutMessageBean() - Constructor for class com.ergotech.transsecs.secs.VIBInOutMessageBean
VIBLogger - Class in com.ergotech.transsecs.secs: This logger provides access to the messages,bytestreams and events from within MIStudio.
VIBLogger(String, OutPortConnectionInterface) - Constructor for class com.ergotech.transsecs.secs.VIBLogger: This should only be called once.
VIBMessageBean - Class in com.ergotech.transsecs.secs
VIBMessageBean() - Constructor for class com.ergotech.transsecs.secs.VIBMessageBean: Constructor.
VIBMessageBean.WaitForResponse - Class in com.ergotech.transsecs.secs: Called when the CreateReportsResponse message is received.
VIBMissingLogMessageException - Exception in com.ergotech.vib.exceptions: Thrown when a log message is required to be associated with the value and is not.
VIBMissingLogMessageException(String) - Constructor for exception com.ergotech.vib.exceptions.VIBMissingLogMessageException
VIBOutMessageBean - Class in com.ergotech.transsecs.secs
VIBOutMessageBean() - Constructor for class com.ergotech.transsecs.secs.VIBOutMessageBean
VIBTTLExpiredException - Exception in com.ergotech.vib.exceptions: Thrown when a log message is required to be associated with the value and is not.
VIBTTLExpiredException(String) - Constructor for exception com.ergotech.vib.exceptions.VIBTTLExpiredException
VIBUpdateFailedException - Exception in com.ergotech.vib.exceptions
VIBUpdateFailedException() - Constructor for exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Create an exception will a null message.
VIBUpdateFailedException(String) - Constructor for exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Create an exception with a message indicating why.
VIBUpdateFailedException(Throwable) - Constructor for exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Create an exception as a wrapper for another exception.
VIBUpdateFailedException(String, Throwable) - Constructor for exception com.ergotech.vib.exceptions.VIBUpdateFailedException: Create an exception as a wrapper for another exception with an additional exlanation as to why.
VID - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: Used to identify a VID.
VID - Class in com.ergotech.secs
VID(String) - Constructor for class com.ergotech.secs.VID
VID(long) - Constructor for class com.ergotech.secs.VID
VID(byte) - Constructor for class com.ergotech.secs.VID
VID(short) - Constructor for class com.ergotech.secs.VID
VID(int) - Constructor for class com.ergotech.secs.VID
VID(SecsFormat) - Constructor for class com.ergotech.secs.VID
VID - Static variable in class TransSECS.GemIDConnection: Used to identify a VID.
VID_CHANGED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an ID's value has changed.
VID_REGISTERED - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: This event is posted when an id is triggered.
VID_STR - Static variable in interface com.ergotech.secs.gem.GemEquipmentInterface: The string used to describe all the value IDs (VID, ECID, SVID, DVNAME).
VID_STR - Static variable in class TransSECS.GemIDConnection: The string used to describe all the value IDs (VID, ECID, SVID, DVNAME).
VIDExists(VID) - Method in class com.ergotech.secs.Event
vidSecsFormat - Variable in class com.ergotech.secs.gem.GemHostModel: The format and so the byte-length of the integer VID.
VidVPair - Class in com.ergotech.secs: VVidVPair Used in S16F5,S16F27 consists of data elements VID, V
VidVPair() - Constructor for class com.ergotech.secs.VidVPair
VidVPair(VID, V) - Constructor for class com.ergotech.secs.VidVPair
VidVPair(SecsFormat00) - Constructor for class com.ergotech.secs.VidVPair
VLAACK - Class in com.ergotech.secs: Variable Limit Attribute Acknowledge Code, 1 byte.
VLAACK(byte) - Constructor for class com.ergotech.secs.VLAACK: Create a new message with binary (format 10) data.
VLAACK(SecsFormat) - Constructor for class com.ergotech.secs.VLAACK
VoyeurPassThroughMessageHandler - Class in com.ergotech.transsecs.secs: This message handler will pass all the information from one wrapper to the other.
VoyeurPassThroughMessageHandler(WrapperInterface, WrapperInterface, int) - Constructor for class com.ergotech.transsecs.secs.VoyeurPassThroughMessageHandler: This constructor creates the message handler with sufficient information to make the pass through.

W

WAIT_CR_FROM_HOST - Static variable in class com.ergotech.secs.gem.CommunicationsHandler: Constant WAIT_CR_FROM_HOST.
waitForReply() - Method in class com.ergotech.secs.SecsMsg: Wait for a reply or for the message to timeout.
WaitForResponse() - Constructor for class com.ergotech.transsecs.secs.VIBMessageBean.WaitForResponse
WARNING - Static variable in class com.ergotech.secs.SecsEvent: This event is posted when a warning is received that is not specified elsewhere.
whoAmI() - Method in class com.ergotech.vib.servers.DataSource: Returns human-readable String about this named data source and its container
WITHIN - Static variable in class com.ergotech.vib.servers.plc.PLCAddressBlock
WORD_SIZE - Static variable in class com.ergotech.vib.servers.modbus.ModbusPresetSingleRegisterServer: The size of a Modbus Word.
WORD_VALUE - Static variable in class com.ergotech.vib.servers.plc.PLCServer: The value type WORD
WORDSWAP - Static variable in class com.ergotech.vib.servers.plc.PLCServer: Definition for point swap style.
WORK_AREA_SIZE - Static variable in class com.ergotech.vib.servers.fins.FinsPLC: The work area size (CJ1 controller).
WrapperInterface - Interface in com.ergotech.secs: This is the interface for the wrappers.
Writable() - Constructor for class com.ergotech.vib.servers.DataSource.Writable: The constructor will "init" and "start" the data source, it will also set the suspend status to "NEVER".
Writable(OutPortConnectionInterface) - Constructor for class com.ergotech.vib.servers.DataSource.Writable: Create the object with a parent.
write(byte[]) - Method in class com.ergotech.secs.HSMSSocketManager: Writes the array to the socket.
write(byte) - Method in class com.ergotech.secs.PortManager: Writes the byte to the port.
write(byte[]) - Method in class com.ergotech.secs.PortManager: Writes the array to the port.
write(byte[]) - Method in class com.ergotech.secs.SecsISocketManager: Writes the array to the socket.
write(byte[]) - Method in class com.ergotech.secs.SerialPortManager: Writes the array to the socket.
write(byte[]) - Method in class com.ergotech.secs.TerminalServerPortManager: Writes the array to the socket.
write(int) - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Writes the byte to the output stream after converting to/from Base64 notation.
write(byte[], int, int) - Method in class com.ergotech.transsecs.secs.Base64.OutputStream: Calls Base64.OutputStream.write(int) repeatedly until len bytes are written.
write(byte) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will write a single byte.
write(byte[]) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will write a single byte.
write(byte[], int, int) - Method in class com.ergotech.vib.manipulators.SerialPortManipulator: This will write an array of bytes.
write(byte) - Method in class com.ergotech.vib.ports.Port: This will write a single byte.
write(byte[]) - Method in class com.ergotech.vib.ports.Port: This will write a single byte.
write(byte[], int, int) - Method in class com.ergotech.vib.ports.Port: This will write an array of bytes.
write(byte) - Method in interface com.ergotech.vib.ports.PortInterface: This will write a single byte.
write(byte[]) - Method in interface com.ergotech.vib.ports.PortInterface: This will write an array of bytes.
write(byte[], int, int) - Method in interface com.ergotech.vib.ports.PortInterface: This will write an array of bytes starting at offset for length number of bytes.
write(int) - Method in class com.ergotech.vib.ports.PortOutputStream: Write a byte (int) to the stream.
write(byte[], int, int) - Method in class com.ergotech.vib.ports.PortOutputStream: Write a byte array to the stream.
write(byte[]) - Method in class com.ergotech.vib.ports.PortOutputStream: Write a byte array to the stream.
write(byte[], int, int) - Method in class com.ergotech.vib.ports.UDPActiveSocket: Writes the given array to the socket address of the last packet received.
write(byte[], int, int) - Method in class com.ergotech.vib.ports.UDPPassiveSocket: Writes the given array to the socket address of the last packet received.
write(byte[]) - Method in class com.ergotech.vib.ports.UDPSocket: Pass through to write(b, offset, length).
WRITE_CONTAINER_NAME - Static variable in class com.ergotech.vib.servers.rest.RestWrapper: The name of the container holding the variables that will be written.
WRITE_ERROR - Static variable in class com.ergotech.vib.ports.PortDeviceServer: Some error writing the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Write to the device.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Write to the device.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.plc.PLCDeviceServer: Writes the packet to the PLC.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243DeviceServer: Write to the device.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243ITDeviceServer: Write to the device.
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer
writeDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: Write to the device.
writeDeviceInternal(ControlLogixDataBlock) - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: Read the packet from the PLC.
writeServers - Variable in class com.ergotech.vib.servers.plc.PLCAddressBlock

X

xColumnDataType - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: A choice of integer or double values for the x-column.
xMax - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: the maximum value of the x data values
xMin - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: the minimum value of the x data values
Xor - Class in com.ergotech.vib.manipulators: Calculates the boolean XOR of two inputs.
Xor() - Constructor for class com.ergotech.vib.manipulators.Xor: Generic Constructor.

Y

year - Variable in class com.ergotech.vib.manipulators.datetime.DateCreator
year(ValueChangedEvent) - Method in class com.ergotech.vib.manipulators.datetime.DateCreator: This is used to set the year.
yMax - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: the maximum value of the y columns data values
yMin - Variable in class com.ergotech.vib.servers.TwoDimensionalDataSource: the minimum value of the y columns data values

Z

zeroBased - Variable in class com.ergotech.vib.servers.ArrayDataSource: if set to true, will start at time=0, otherwise starts at system current time
zeroLength() - Method in class com.ergotech.secs.SecsDataStructure
zeroLength() - Method in interface com.ergotech.secs.SecsFormat: Returns true if the format is zero length.
zeroLength() - Method in class com.ergotech.secs.SecsFormat00: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat10
zeroLength() - Method in class com.ergotech.secs.SecsFormat11: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat20
zeroLength() - Method in class com.ergotech.secs.SecsFormat22
zeroLength() - Method in class com.ergotech.secs.SecsFormat30: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat31: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat32: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat34: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat40: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat44: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat50: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat51: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat52: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.secs.SecsFormat54: Ask if the list is a zero length list.
zeroLength() - Method in class com.ergotech.transsecs.secs.SecsFormat99

_

_initializePortPool() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ab.ControlLogixEthernetDirectDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ab.DF1DeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ab.LogixEthernetDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusDeviceServerBase: This is used by the subclasses to set the port names before calling "initializePortPool" here it just calls initializePortPool directly.
_initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverBlueToothDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusRTUOverTCPDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.modbus.ModbusTCPDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.omron.HostLinkDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ppi.CP243SlaveDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ppi.PPIDeviceServer: If the port and host are set, this creates the factory for this object.
_initializePortPool() - Method in class com.ergotech.vib.servers.ppi.RFC1006DeviceServer: If the port and host are set, this creates the factory for this object.
_main(String[]) - Static method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer
_readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.fins.FinsDeviceServer: Read from the device.
_readDevice(PLCDataBlock) - Method in class com.ergotech.vib.servers.melsec.MelsecDeviceServer: Read from the device.
_refreshImage() - Method in class com.ergotech.vib.servers.plc.PLCAddressBlock: Refresh the data in the block.

A B C D E F G H I J L M N O P Q R S T U V W X Y Z _