| Package | Description |
|---|---|
| com.ergotech.secs | |
| com.ergotech.secs.gem | |
| com.ergotech.transsecs.secs |
| Class and Description |
|---|
| GemHostModel.GemValueVariable
This adds the "vid" variables.
|
| GemToolModelSnapshot.GemReportVariable
This adds a list of VIDs that are associated with this report.
|
| Class and Description |
|---|
| AlarmWriter
This is the interface for something that will know how to generate an alarm.
|
| CommunicationsHandler
This System Handler will maintain the current state of the equipment (Communicating, Not-Communicating, Disabled)
This will also stop the flow of messages in both directions when the state is not communicating.
|
| DeclinedStateChangeException |
| ECHandler
This is an implementation of the EquipmentControl.
|
| ECIDValidationInterface |
| EquipmentControlInterface
This allows control over the configuration of the equipment that by the gem
standards would normally be set by the host.
|
| EventSpooler
This will spool all outgoing
messages from the time a primary is received until the response is sent.
|
| GemALID
This holds all information about a single alarm.
|
| GemCEID
This server maintains the information associated with a CEID.
|
| GemCEIDExportInterface
This interface is implemented only by GemCEID and is used by OPC (and possibly other) code to prevent the GemCEID and all dependecies
from being pulled into the OPC implementation.
|
| GemDevicesSVID
storage for a SVID that is maintained by the GEM infrastructure but still sent to the PLC/Device.
|
| GemECID
storage for a ECID.
|
| GemEquipment
This class is the entry point for any gem interface.
|
| GemEquipmentInterface
This is the primary equipment interface to the GEM package.
|
| GemException
An exception thrown by GEM to indicate a configuration specific error.
|
| GemHandler
This is a MessageHandler that will handle all the messages needed to
configure limits.
|
| GemHostModel.GemValueVariable
This adds the "vid" variables.
|
| GemID
This will store any of the ID's.
|
| GemLIMITID
This manipulator will keep track of the state of the limitid.
|
| GemRPTID
This will store all the information about a specific report.
|
| GemSpoolHandler
This is a MessageHandler for Spooling
|
| GemSVID
storage for a SVID
|
| GemToolModelSnapshot
Instances of this object are created and then stored by the GEM Handler - and the reverse from which a GEMHandler is configured.
|
| GemToolModelSnapshot.GemAlarmVariable
This adds the "set" variable that the tool side uses to store the current state of the alarm.
|
| GemToolModelSnapshot.GemLimitVariable
This adds the configuration for a limit id.
|
| GemToolModelSnapshot.GemReportVariable
This adds a list of VIDs that are associated with this report.
|
| GemToolModelSnapshot.GemReportVariable.VariableType |
| GemToolModelSnapshot.GemVariable
Storage for an ID/value pair.
|
| GemVID
This will store the current value of a VID.
|
| InvalidECIDChangeException |
| Monitor
This will describe a monitor for a VID.
|
| OnlineHandler
This will control the online/offline state of the machine.
|
| ReportWriter |
| SecsFormatValueObject
This value object wraps a SecsFormat object.
|
| SendEvent |
| StateChangeNotification
This interface should be implemented by anyone wishing to be notified of or
control state changes.
|
| TraceServer
A extension of SimpleDataSource is used to collect trace data.
|
| Class and Description |
|---|
| EquipmentControlInterface
This allows control over the configuration of the equipment that by the gem
standards would normally be set by the host.
|
Copyright © 1999-2021 ErgoTech Systems, Inc. All Rights Reserved.