transsecs_host_simulator
TransSECS Host in Simulation Mode
TransSECS can be used as a test host when in “Run” mode.
Load a host project (GEMHost or ExtendedTestHost), press the hammer/star button to build the project. After building the project the GEMHost will actively attempt to connect to the tool at the IP Address (hostname) and port configured in the project. The ExtendedTestHost will be ready to connect to the tool, and will connect following the sending of the EstablishCommunications (S1F13) and the RequestOnline (S1F17) messages.
transsecs_host_simulator.txt · Last modified: by wikiadmin