Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Using the TransSECS EquipmentConfig Bean in MIStudio ====== Every TransSECS project will provide an "EquipmentConfig" bean on the Diagram Window palette under the ToolNamePrimaries tab. This is the core of your MIStudio/TransSECS project and must be placed on the Diagram of your main application. Depending on if you are building a tool or a host application, the configuration of the EquipmentConfig will be different (although there are some common properties) below are examples of what you might see for a GEM enabled tool and a "GEM" host. **EquipmentConfig for a sample GEM Tool** {{:pasted:20200513-000529.png}} **EquipmentConfig for a sample GEM Host** {{:pasted:20200513-000832.png}} using_the_equipmentconfig_bean.txt Last modified: 2020/05/13 00:08by wikiadmin