Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. =====TransSECS Host in Simulation Mode===== TransSECS can be used as a test host when in "Run" mode. Load a host project (GEMHost or ExtendedTestHost), press the hammer/star button to build the project. After building the project the GEMHost will actively attempt to connect to the tool at the IP Address (hostname) and port configured in the project. The ExtendedTestHost will be ready to connect to the tool, and will connect following the sending of the EstablishCommunications (S1F13) and the RequestOnline (S1F17) messages. transsecs_host_simulator.txt Last modified: 2020/07/19 21:25by wikiadmin