Differences

This shows you the differences between two versions of the page.

--- using_the_equipmentconfig_bean [2020/05/13 00:05]
wikiadmin
+++ using_the_equipmentconfig_bean [2020/05/13 00:08] (current)
wikiadmin
@@ Line 1: / Line 1: @@
-**Using the TransSECS EquipmentConfig Bean in MIStudio**
+====== Using the TransSECS EquipmentConfig Bean in MIStudio ======
 Every TransSECS project will provide an "EquipmentConfig" bean on the Diagram Window palette under the ToolNamePrimaries tab. This is the core of your MIStudio/TransSECS project and must be placed on the Diagram of your main application.
@@ Line 5: / Line 5: @@
 Depending on if you are building a tool or a host application, the configuration of the EquipmentConfig will be different (although there are some common properties) below are examples of what you might see for a GEM enabled tool and a "GEM" host.
-EquipmentConfig for a sample GEM Tool
+**EquipmentConfig for a sample GEM Tool**
 {{:pasted:20200513-000529.png}}
-EquipmentConfig for a sample GEM Host
+**EquipmentConfig for a sample GEM Host**
+{{:pasted:20200513-000832.png}}