This shows you the differences between two versions of the page.
|
Next revision
|
Previous revision
|
using_the_equipmentconfig_bean [2020/05/12 23:59]
wikiadmin created |
using_the_equipmentconfig_bean [2020/05/13 00:08] (current)
wikiadmin |
| **Using the TransSECS EquipmentConfig Bean in MIStudio** | ====== Using the TransSECS EquipmentConfig Bean in MIStudio ====== |
| |
| Every TransSECS project will provide an "EquipmentConfig" bean on the Diagram Window palette under the ToolNamePrimaries tab. This is the core of your MIStudio/TransSECS project and must be placed on the Diagram of your main application. | Every TransSECS project will provide an "EquipmentConfig" bean on the Diagram Window palette under the ToolNamePrimaries tab. This is the core of your MIStudio/TransSECS project and must be placed on the Diagram of your main application. |
| |
| Depending on if you are building a tool or a host application, the configuration of the EquipmentConfig will be different (although there are some common properties) below are examples of what you might see for a GEM enabled tool and a "GEM" host. | Depending on if you are building a tool or a host application, the configuration of the EquipmentConfig will be different (although there are some common properties) below are examples of what you might see for a GEM enabled tool and a "GEM" host. |
| | |
| | **EquipmentConfig for a sample GEM Tool** |
| | |
| | {{:pasted:20200513-000529.png}} |
| | |
| | **EquipmentConfig for a sample GEM Host** |
| | |
| | {{:pasted:20200513-000832.png}} |