Differences

This shows you the differences between two versions of the page.

--- hsms_secsi_protocol_converter [2020/09/03 11:09]
wikiadmin
+++ hsms_secsi_protocol_converter [2020/09/03 11:11] (current)
wikiadmin
@@ Line 21: / Line 21: @@
 **Bench Testing using ErgoTech's SECSTester and StandaloneGEMTool**
-You can test the protocol converter entirely on your laptop with the ErgoTech SECSTester and StandaloneGEM tool.  Please ask for copies of these if they were not provided with the converter.
+You can test the protocol converter entirely on your laptop or desktop with the ErgoTech SECSTester and StandaloneGEM tool.  Please ask for copies of these if they were not provided with the converter.
-The setup looks about as below.  You run the SECS Tester and the Standalone Tool on your laptop or desktop computer.  This can be Window or Linux and the documentation shows how to run on either of these platforms.  You can also run the Tool and SECSTester on different computers.
+The setup is in the diagram below.  You run the SECS Tester and the Standalone Tool on your laptop or desktop computer.  This can be Window or Linux and the documentation shows how to run on either of these platforms.  You can also run the Tool and SECSTester on different computers.
 Configure the Standalone Tool to communication over serial and configure the SECSTester with the IP address and port of the Protocol Converter.  You do need two USB/Serial interfaces and a null modem (probably also a gender changer).
-{{:pasted:20200903-110857.png}}
+{{:testingprotocolconverter.png?800|}}