configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
configuration [2020/05/12 18:06]
wikiadmin created 		configuration [2020/07/07 12:19] (current)
wikiadmin
Line 1: Line 1:
-Configuration+[[TransSECS Configuration]]
  
-A number of parameters can be controlled by the ErgoTechConfiguration.properties file. A sample, file is installed with the application. +MIStudio Configuration
- +
-# needed if trigger source is reset automatically back to boolean false (PLC) +
-transsecs.resetceidtrigger=false +
-#message handling threading model, 0=all messages on same thread, 1=Push the processing of each message onto a new thread, one thread will be used for primaries and many for responses. +
-transsecs.threadingmodel=1 +
-# voyeur option +
-#transsecs.passthrough=true +
-# set debug level higher for more verbose session manager logging +
-sessionmanager.debuglevel=0 +
-# id type defaults to 54 if this options is excluded (options 50, 51, 52, 54, etc.)  This is used by the tool to set all the id types (ceid, vid, dataid, alid, rptid). +
-transsecs.idtype=54 +
-# following four used for GEM host applications (id type options 50, 51, 52, 54, etc.)  +
-# gemhost in the name of the tool defined in the TransSECS project.   +
-gemhost.ceidsecsformat=54 +
-gemhost.vidsecsformat=52 +
-gemhost.dataidsecsformat=52 +
-gemhost.alidsecsformat=52 +
-gemhost.rptidsecsformat=54 +
-# there can be multiple entries if multiple hosts are deployed in the same application +
-anothergemhost.ceidsecsformat=52 +
-anothergemhost.vidsecsformat=52 +
-anothergemhost.dataidsecsformat=52 +
-anothergemhost.alidsecsformat=52 +
-anothergemhost.rptidsecsformat=52 +
-###### +
-# activate simple S7Fx (x=3,5,17,19) file based recipe handling (default is 0, no recipe handling, set to 1 to enable recipe management) +
-transsecs.recipemanager=0 +
-#used only if recipemanager is set to true +
-transsecs.recipemanager.basedir=./ +
-transsecs.recipemanager.extension=rcp +
-####### +
-# needed for MQTT so that send message trigger tag is reset automatically +
-transsecs.resetsendmessagetrigger=false+
  
  
  • configuration.1589324762.txt.gz
  • Last modified: 2020/05/12 18:06
  • by wikiadmin