Differences

This shows you the differences between two versions of the page.

--- add_incomingvalue_last_lineofscript [2025/05/20 12:02] – wikiadmin
+++ add_incomingvalue_last_lineofscript [2025/05/20 13:52] (current) – [How to add incomingValue; to every script in a .tsx (TransSECS project file)] wikiadmin
@@ Line 26: / Line 26: @@
 }
 incomingValue;
+</code>
+This is also OK (there is an output at the end)
+<code text>
+if (incomingValue.getQuality()==0) {
+  status=2;
+} else {
+  status=-1;
+}
+status;
 </code>
@@ Line 39: / Line 49: @@
 - Exit TransSECS (TransSECS should not be running)
 - On Windows use Notepad++ to load the project tsx. You can change the language to XML, but this is not necessary
-<note>Note: this is a two pass process. The first step is to mark all existing "incomingValue;" with "incomingValue; <!OK -- already in place-->" to keep them. The second step is to add "incomingValue;" where they are missing</note>
+<note>Note: this is a two pass process. The first step is to mark all existing outputs strings just before the end of the script (any string ending with ";") with <nowiki>  "<!--OK-->" </nowiki> to keep them. The second step is to add "incomingValue;" where they are missing before the end of the script</note>
 ==First Pass: replace all existing "incomingValue;" so these are preserved==
@@ Line 46: / Line 56: @@
   - Set up the Replace:
      * Search Mode: Regular Expression
-     * Find what: incomingValue\s*;\s*(</Script>)
+     * Find what:<nowiki>  (;)\s*</Script></nowiki>
-     * Replace with: incomingValue;<!--OK, already in place-->\1
+     * Replace with:<nowiki> \1<!--OK--></Script></nowiki>
   - Execute the replace: Click Replace All
-{{:pasted:20250520-104118.png}}
+{{:pasted:20250520-120308.png}}
-You should see a count on the bottom bar of this panel of how many original "incomingValue;" were replaced
+What this does is find any string(or just ;) with a ";" just before the end of the script (the </Script> tag) and replaces this with a place holder marking it as "OK". You should see a count on the bottom bar of this panel of how many of these valid strings were found. In the second pass, below, we look for end of script tags (</Script>) which do not end with a ; and fix them:
-==Second Pass: add new incomingValue; where needed to end a script (and ignore the incomingValue; already in place)==
+==Second Pass: add new incomingValue; where needed to end a script (and ignore the incomingValue; already in place) ==
- - Set up the Replace:
+  - Set up the Replace:
      * Search Mode: Regular Expression
-     * Find what: (?<!<!--OK, already in place-->)</Script>
+     * Find what: <nowiki> (?<!<!--OK-->)</Script></nowiki>
-     * Replace with: incomingValue; <!-- added mmmddyyyy--> </Script>
+     * Replace with: incomingValue;</Script>
   - Execute the replace: Click Replace All
+  -
+{{:pasted:20250520-123447.png}}
+On this last pass you can add a comment to the replacement line, such as incomingValue;<nowiki>  <!--fixed today--></nowiki> , and put today's date in place of "today"
+Note: the OK comment  <nowiki> <!--OK--> </nowiki> and other comments added in these steps will be removed after you load the project into TransSECS and re-save.
+This procedure should help you modify projects using scripts in which there is no output at the end of the script. However, it is good to do a quick check of your project after these changes. Also there can be some casese where incomingValue; is not inserted before the end of the script because the last line in the script ended with a ; and there is no output on that line. For example, if your last line was a DataSource.logMessage("some message"); this will not get an incomingValue; added and logMessage does not return a value so this can still cause the script not to execute the next time it is triggered. If you had a method call on the last line which does return a value then this satisfies the output requirement. Likewise if your last line was a comment such as <nowiki>"//this is a comment"</nowiki> then a new incomingValue; will be added.