Differences

This shows you the differences between two versions of the page.

--- add_incomingvalue_last_lineofscript [2025/05/20 11:45] – wikiadmin
+++ add_incomingvalue_last_lineofscript [2025/05/20 13:52] (current) – [How to add incomingValue; to every script in a .tsx (TransSECS project file)] wikiadmin
@@ Line 26: / Line 26: @@
 }
 incomingValue;
+</code>
+This is also OK (there is an output at the end)
+<code text>
+if (incomingValue.getQuality()==0) {
+  status=2;
+} else {
+  status=-1;
+}
+status;
 </code>
@@ Line 31: / Line 41: @@
 This is a change which was implemented in early 2024 so if you have old projects without this final "incomingValue;" you can add this last line in the script manually to every script, or you can use the steps below (please make a copy of your project before doing this in case there is a corruption of the file after the process).
 ===How to add incomingValue; to every script in a .tsx (TransSECS project file)===
@@ Line 41: / Line 49: @@
 - Exit TransSECS (TransSECS should not be running)
 - On Windows use Notepad++ to load the project tsx. You can change the language to XML, but this is not necessary
-<note>Note: this is a two pass process. The first step is to mark all existing "incomingValue;" with "incomingValue; <!OK -- already in place-->" to keep them. The second step is to add "incomingValue;" where they are missing</note>
+<note>Note: this is a two pass process. The first step is to mark all existing outputs strings just before the end of the script (any string ending with ";") with <nowiki>  "<!--OK-->" </nowiki> to keep them. The second step is to add "incomingValue;" where they are missing before the end of the script</note>
-- Use Ctrl-H to bring up the panel for the Find and Replace
-- Set up the Replace:
+==First Pass: replace all existing "incomingValue;" so these are preserved==
-  * Search Mode: Regular Expression
-  * Find what:
+  - Use Ctrl-H to bring up the panel for the Find and Replace
+  - Set up the Replace:
+     * Search Mode: Regular Expression
+     * Find what:<nowiki>  (;)\s*</Script></nowiki>
+     * Replace with:<nowiki> \1<!--OK--></Script></nowiki>
+  - Execute the replace: Click Replace All
+{{:pasted:20250520-120308.png}}
+What this does is find any string(or just ;) with a ";" just before the end of the script (the </Script> tag) and replaces this with a place holder marking it as "OK". You should see a count on the bottom bar of this panel of how many of these valid strings were found. In the second pass, below, we look for end of script tags (</Script>) which do not end with a ; and fix them:
+==Second Pass: add new incomingValue; where needed to end a script (and ignore the incomingValue; already in place) ==
+  - Set up the Replace:
+     * Search Mode: Regular Expression
+     * Find what: <nowiki> (?<!<!--OK-->)</Script></nowiki>
+     * Replace with: incomingValue;</Script>
+  - Execute the replace: Click Replace All
+  -
+{{:pasted:20250520-123447.png}}
+On this last pass you can add a comment to the replacement line, such as incomingValue;<nowiki>  <!--fixed today--></nowiki> , and put today's date in place of "today"
+Note: the OK comment  <nowiki> <!--OK--> </nowiki> and other comments added in these steps will be removed after you load the project into TransSECS and re-save.
-{{:pasted:20250520-104118.png}}
+This procedure should help you modify projects using scripts in which there is no output at the end of the script. However, it is good to do a quick check of your project after these changes. Also there can be some casese where incomingValue; is not inserted before the end of the script because the last line in the script ended with a ; and there is no output on that line. For example, if your last line was a DataSource.logMessage("some message"); this will not get an incomingValue; added and logMessage does not return a value so this can still cause the script not to execute the next time it is triggered. If you had a method call on the last line which does return a value then this satisfies the output requirement. Likewise if your last line was a comment such as <nowiki>"//this is a comment"</nowiki> then a new incomingValue; will be added.